H. IKEUCHI & CO., LTD. List of Products and Services

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards both ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

The "Wide Angle Fan Nozzle (Low Volume Spray) YYA" is a two-fluid wide angle fan nozzle that generates a fine mist with an average particle diameter of 15 to 30 μm, featuring a wide spray pattern. It has a compact design and can spray viscous liquids (up to about 300 cP). This is an external mixing type metal integrated two-fluid nozzle that atomizes by mixing compressed air and liquid outside the nozzle. It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Two-fluid wide angle fan nozzle ○ Wide spray pattern ○ Capable of spraying viscous liquids ○ Compact type ○ Structure that is less prone to clogging For more details, please contact us or download the catalog.

Product Introduction The "GSIM2" series is an atomizing nozzle that achieves a large spray volume with a small amount of compressed air due to its low air-to-water ratio design. It is effective in cooling combustion gases and humidifying exhaust gases at steel mills and power plants, as well as in waste liquid spraying. With high cooling performance, it ensures stable processing for temperature regulation inside furnaces and gas cooling in cooling towers. Additionally, it is utilized for dust suppression in recycling facilities, waste incineration plants, and raw material facilities for steel and cement, effectively reducing dust dispersion with fine mist. *We also offer a wide range of other spray nozzles. For quotes or custom requests, please feel free to contact us with any nozzle-related inquiries. Phone and online consultations are available at any time.*

The "Conical Nozzle (Small Amount Spray / Ultra Compact) SCBIMJ" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid conical nozzle that generates a fine mist with an average particle diameter of less than 100μm. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Minimum spray flow rate among two-fluid systems ○ Ultra-compact design with an overall length of about 42mm ○ Equipped with ON-OFF control function ○ Liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa For more details, please contact us or download the catalog.

The "Fan-Shaped Nozzle (Fine Mist / Ultra Compact) SCBIMV.S" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 30μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the periphery in an internal mixing air type.) It is a suction type that draws up the liquid and sprays it using the force of compressed air. 【Features】 ○ Uniform spray pattern with consistent flow rate across the entire area ○ Minimum spray flow rate among two fluids ○ Ultra compact design with a total length of approximately 42mm ○ No need for a device for liquid pressurization ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

The "Fan-shaped Nozzle (Small Amount Spray / Ultra Compact) SCBIMV" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 100μm. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the periphery in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Switchable between two spray patterns: uniform & triangular distribution ○ Minimum spray flow rate among two-fluid systems ○ Wide range of flow adjustment ○ Ultra compact type with a total length of approximately 42mm ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

The "Fan-shaped Nozzle DDRP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single fluid and dual fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single fluid nozzle in the medium to high water flow range and as a dual fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual fluid nozzle. 【Features】 - Usable in both single fluid and dual fluid configurations - Single fluid in medium to high water flow range, dual fluid in low water flow range - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Spray pattern thickness angle is wide at 60°, allowing for surface cooling For more details, please contact us or download the catalog.

The "Fan-Shaped Nozzle VVP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to function as a single-fluid nozzle in the medium to high water flow range and as a dual-fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow range, dual-fluid in low water flow range - Wide turn-down ratio (throttling ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Built-in check valve on the air side For more details, please contact us or download the catalog.

The "Conical Nozzle JOKIJet" consists of multiple components such as the nozzle body, adapter, O-ring, and flange, and is a two-fluid conical nozzle that uses steam instead of compressed air. It is an external mixing type that atomizes by mixing compressed air and liquid outside the nozzle. It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. Due to its steam specifications, it can be used at low running costs in factories with boiler facilities. 【Features】 ○ Steam drive nozzle ○ Two-fluid conical nozzle ○ Usable at low running costs ○ External mixing type ○ Liquid pressurization type For more details, please contact us or download the catalog.

The "Conical Nozzle LSIM" is a large flow two-fluid conical nozzle composed of multiple parts including a nozzle tip, cap, adapter, and O-ring, which generates a fine mist with an average particle diameter of 40μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Liquid flows in the center of the nozzle while compressed air flows around the periphery in an internal mixing external air design.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Low running costs due to blower air specifications ○ Maximum particle diameter of 150μm at an average particle diameter of 80μm ○ No coarse particles due to the fine atomization design of the nozzle ○ Compact and lightweight ○ Spray angle of 20° For more details, please contact us or download the catalog.

The "Fan-Shaped Nozzle BAVV" consists of three components: a nozzle, an adapter, and a liquid socket, and it generates a large volume of mist with an average particle diameter of 40μm or more. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the periphery in this internal mixing type.) It has a large foreign object passage diameter, making it less prone to clogging. It is a liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle. 【Features】 ○ Generates mist with an average particle diameter of 40μm or more ○ Large volume two-fluid fan-shaped nozzle ○ Low running costs due to blower air specifications ○ Large foreign object passage diameter, making it less prone to clogging ○ Liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle For more details, please contact us or download the catalog.

The "Charging Cone Nozzle JJA" is a large flow two-fluid charging cone nozzle composed of multiple parts, including the nozzle body, mixing adapter, liquid pipe, and flange, which generates fine mist and medium mist with an average particle diameter of 130μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (It is a pre-mixing type that mixes liquid and compressed air within the nozzle adapter.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Uniform particle diameter across the entire range ○ Wide adjustment range for spray flow rate ○ Large foreign object passage diameter, making it less prone to clogging ○ Wastewater combustion in waste incineration plants ○ Easy maintenance due to its simple structure For more details, please contact us or download the catalog.

The "Fan-Shaped Nozzle DOVVA-G" consists of multiple components such as the nozzle body, pipe, and flange, and is a high-flow two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of 80μm or more. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization. It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. Its simple structure makes maintenance easy. 【Features】 - High-flow two-fluid fan-shaped nozzle - Generates fine mist with an average particle diameter of 80μm or more - Excellent maintenance due to its simple structure - Large foreign object passage diameter, making it less prone to clogging - Suitable for applications such as wastewater and sewage spraying For more details, please contact us or download the catalog.

The "Fan-Shaped Nozzle DDA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe, and it is a high-flow two-fluid elliptical spray nozzle that generates fine mist with an average particle diameter of 50μm or more. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization (a pre-mix type that mixes liquid and compressed air within the nozzle adapter). It is a liquid pressurization type that supplies liquid to the two-fluid nozzle under a pressure of approximately 0.07 to 0.7 MPa for spraying. 【Features】 ○ Has an elliptical spray pattern, allowing for wide-area spraying ○ Liquid pressurization type that sprays at a pressure of approximately 0.07 to 0.7 MPa ○ Wide range of spray flow adjustment with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements For more details, please contact us or download the catalog.

The "Fan-Shaped Nozzle DOVEA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe, and it is a high-flow two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of 50μm or more. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization. (It is a pre-mix type that mixes liquid and compressed air within the nozzle adapter.) The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.07 to 0.7 MPa. 【Features】 ○ Uniform flow rate and particle diameter across the entire range ○ Wide adjustment range for spray flow rate with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements ○ Spray angles of 55°, 70°, 95°, and 110° For more details, please contact us or download the catalog.

The "Fan-Shaped Nozzle VVEA" is a two-fluid nozzle composed of multiple parts including a nozzle tip, cap, mixing adapter, and liquid socket. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization. This is a pre-mix type that combines liquid and compressed air within the nozzle adapter. The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.2 to 0.7 MPa. 【Features】 ○ A nozzle that sprays fine mist with a thin thickness and uniform distribution ○ A two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of over 50 μm ○ Capable of spraying with a thin thickness direction and strong impact force ○ A liquid pressurization type that sprays at a pressure of approximately 0.2 to 0.7 MPa ○ Offers a wide range of flow adjustment with minimal variation in spray angle For more details, please contact us or download the catalog.

The "Full Cone Nozzle (Large Spray) AKIJet(R)" is a collision type nozzle that further collides atomized droplets created by internal mixing to achieve homogenization and atomization, generating fine mist and fog. It is a two-fluid full cone nozzle composed of multiple parts including the nozzle body, adapter, and strainer. There are two types: a liquid pressurization type that supplies liquid to the two-fluid nozzle under pressure, and a suction type that draws liquid up and sprays it using the force of compressed air. 【Features】 ○ Generates ultra-fine mist through ultrasonic waves during collision ○ A two-fluid full cone nozzle that produces fine mist and fog ○ Capable of generating a homogeneous and fine mist ○ Suction type that does not require a pressurization device (can also be used with liquid pressurization) For more details, please contact us or download the catalog.

The "Gun Unit BIM Gun" is a micro-mist spraying unit consisting of three parts: a nozzle, a gun, and a tank, featuring a two-fluid fan-shaped or two-fluid air cone nozzle. It employs an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle (with compressed air flowing in the center and liquid flowing around the periphery). It is a suction type that draws up liquid and sprays it using the force of compressed air. It can be equipped with BIMV or BIMK, which generate micro-mists with an average particle diameter of less than 100μm. 【Features】 ○ Two-fluid gun with BIMV and BIMK nozzles at the tip ○ Air flow adjustment function ○ Handheld micro-mist spraying unit operable with one hand ○ Suction type with a 250mℓ tank attached ○ Ideal for spraying chemical solutions and more For more details, please contact us or download the catalog.

The "Full Cone Nozzle (Low Volume Spray) CBIMJ" is a two-fluid full cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring a circular spray pattern with an even flow distribution. It consists of four components: a nozzle tip, core, cap, and adapter, and is a liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle. The spray angle is 20°. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Circular spray pattern with even flow distribution ○ Wide range of spray flow adjustment ○ Minimum spray flow among two-fluid systems ○ Compact type ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

The "Hollow Cone Nozzle (Small Amount Spray) CBIMK.S" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less, featuring an annular spray pattern. It consists of four components: a nozzle tip, core, cap, and adapter, and operates as a suction type that draws liquid using the force of compressed air for spraying. It has a spray angle of 60° and employs internal mixing to atomize the liquid with compressed air inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Suction type that does not require a liquid pressurizing device ○ Annular spray pattern ○ Spray angle of 60° ○ Compact type For more details, please contact us or download the catalog.

The "Hollow Cone Nozzle (Low Volume Spray) CBIMK" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring an annular spray pattern. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It has a wide flow adjustment range with a spray angle of 60°. The internal mixing design allows for the atomization of liquid by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less ○ Liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa ○ Annular spray pattern ○ Wide range of spray flow adjustment ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, using compressed air to draw up and spray the liquid. The two-fluid nozzle consists of four parts: nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

Our company proposes a "Dust Control Fog System" that matches the site through meticulous on-site measurements and careful hearings. We use stainless steel piping that excels in weather resistance and corrosion resistance, offering a "header type" that can be used for a long time and a "fan type" with spray nozzles arranged around factory fans. We utilize various nozzles to match the site. You can also rely on us for automatic spray control, such as sensor spraying. We achieve both dust suppression effects and water conservation. 【Features】 ■ A lineup of spray nozzles and control devices suitable for the site ■ Capable of dust control in large spaces ■ Excellent effectiveness in preventing airborne dust and dust generation (proven to reduce dust concentration by 90%) ■ Outstanding energy-saving and water-saving effects ■ Establishing a dust control system suitable for the site through meticulous on-site measurements and careful hearings *For more details, please refer to the PDF document or feel free to contact us.

The "PSN" series of high-impact slit-type two-fluid nozzles is ideal for precision cleaning. With excellent atomization performance, it thoroughly removes fine dirt and foreign substances from the surface of LCD panels without any cleaning unevenness, thereby improving quality. Compared to the method of arranging multiple nozzles individually, it enables uniform cleaning without inconsistencies. 【Features】 High-impact cleaning: Powerfully removes dirt and foreign substances from LCD panels. Excellent atomization: Addresses dirt in gaps with a fine mist. Uniform finish: Cleans the entire panel without unevenness. Electronics compatibility: Suitable for high-precision panel and substrate cleaning. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any inquiries regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

The "SETO" series spray nozzle for viscous liquids is designed to be resistant to clogging, enabling stable, small-volume spraying of high-viscosity liquids while preventing blockages with excellent foreign matter passage. It allows for uniform fine mist spraying of viscous liquids such as sauces, syrups, and oils, effectively reducing waste and achieving liquid-saving effects. 【Features】 - Clogging prevention design: With a large foreign matter passage diameter, it is structured to be less prone to clogging even with high-viscosity liquids. - Uniform fine mist spraying: Viscous liquids like sauces and syrups can be applied evenly without inconsistencies. - Liquid-saving effect: Efficiently sprays liquids in small amounts, reducing material waste. - Wide range of applications: Ideal for precise spraying of various viscous liquids such as cooking oil, rust inhibitors, and lubricants. - Two-fluid spray technology: Achieves stable atomization performance for high-precision and continuous spraying. *We also offer a wide range of other spray nozzles. For quotes or custom requests, please feel free to contact us with any inquiries regarding nozzles. Phone and online consultations are available at any time.

The high-performance, uniform slit nozzle "PSN" series demonstrates excellent performance in the cooling processes of CGL and EGL equipment, suppressing cooling unevenness with high-precision cooling control. In spangle processing, it achieves uniformity and high-quality finishes on steel sheet surfaces, contributing to the stability and quality improvement of manufacturing lines. Furthermore, its durable design meets on-site needs while also contributing to long-term cost reduction. 【Features】 - Compatible with CGL and EGL equipment: Provides stable performance in cooling processes. - High-precision cooling control: Reduces cooling unevenness and achieves uniform cooling. - Ideal for spangle processing: Supports uniformity and high-quality finishes on steel sheet surfaces. - Highly durable design: Capable of withstanding harsh on-site environments. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

It cools objects without wetting them using an extremely fine mist spray, allowing for precise adjustments in cooling rates for temperature management of steel plates and castings. Additionally, its design minimizes clogging, maintaining stable performance over long periods. It achieves uniform cooling in the manufacturing processes of metals and molded products, supporting improved production efficiency. [Features] - Non-wetting cooling: The fine and uniform spray efficiently cools objects without wetting them. - Flexible control of cooling speed: Temperature management during the cooling process can be adjusted. - Clog-resistant design: Maintains stable spray performance over extended periods. - Wide applicability: Compatible with various objects such as metal parts, molded products, steel plates, and castings. - High-efficiency production support: Achieves uniform cooling, enhancing productivity and quality. *We also offer a wide range of other spray nozzles. For quotes, custom requests, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

It is compatible with viscous liquid spraying and can be utilized for various applications, including cooling and humidity control within the device. With a compact design that allows for easy installation in narrow spaces and a diverse lineup, it meets the needs of various manufacturing environments. [Features] - Achieves precise spraying at extremely low flow rates: Delivers high-precision spraying performance despite its small design. - Compatible with viscous liquid spraying: Efficiently sprays a variety of liquids. - Compact design ideal for installation within the device: Small body that is easy to install even in tight spaces. - Supports various applications: Active in diverse applications, including cooling and humidity control. - Diverse lineup: Offers options including spray ON/OFF control types. *We also have a wide range of other spray nozzles available. For quotes or custom requests regarding nozzles, please feel free to contact us. Phone and online consultations are always available.

The "Spray Vehicle" is a highly flexible spray system designed for easy mobility and installation with a portable design. It allows for precise adjustments of the timing and amount of spray, achieving high-precision spraying with simple operation for a uniform finish. It caters to a wide range of applications in the food sector (seasoning, coating) and industrial sector (lubricants, rust inhibitors, release agents). By spraying the right amount at the necessary timing, it reduces material waste and achieves cost savings. Options such as nozzle fixing components, photoelectric sensors, and mat switches enable the rapid construction of an optimal layout tailored to the site. [Features] Portable design: Easy to move and install, allowing for flexible use. High-precision spraying: Fine adjustments of timing and amount for a uniform finish. Wide range of applications: Versatile use in food and industrial sectors. Cost reduction: Sprays the necessary amount at the right timing to minimize material waste. Rich options: Constructs optimal layouts with nozzle fixing components, photoelectric sensors, etc. Easy installation: Operates with air and a 100V power supply, no piping work required. Improved work efficiency: Responds promptly to site needs and supports efficient operations.

Adopting an external mixing method that efficiently mixes gas and liquid outside the nozzle. This is a full-cone spray nozzle that generates a fine mist with an average particle diameter of 60 μm or less. Its design is resistant to clogging, allowing for stable spray performance and the consistent production of high-quality products in granulation and spray drying processes. [Features] - Clog-resistant design: Maintains stable performance even during long operation, improving production efficiency. - Uniform atomization performance: Generates a fine mist with an average particle diameter of 60 μm or less, enabling high-precision granulation. - External mixing method: Efficiently mixes gas and liquid outside the nozzle, achieving stable spray performance. *We also offer a wide range of other spray nozzles. Please feel free to contact us with any inquiries regarding nozzles, including quotes and custom orders. Phone and online consultations are available at any time.

The gas cooling spray nozzles "GSIM2 series," "JJA series," and "DOVVA-G series" exhibit excellent atomization performance, rapidly and uniformly cooling high-temperature gas, completely evaporating water droplets within the cooling tower, and preventing the accumulation of drains and dust deposits. Additionally, by considering the flow of gas in the arrangement of spray nozzles and designing the layout to match the shape of the cooling tower, the cooling efficiency is maximized. By adopting materials with excellent corrosion and wear resistance, the risk of frequent spray nozzle replacement and performance degradation is reduced. This allows for a reduction in the number of nozzles used, improving maintainability while achieving a more compact and energy-efficient design for the cooling tower. This spray nozzle, which achieves efficient cooling despite high flow rates, supports continuous operation in waste incinerators and exhaust gas treatment facilities, contributing to the protection of downstream equipment and the improvement of process efficiency.

Thin in the thickness direction, it allows for an even and powerful spray. It is suitable for applications such as etching in semiconductor and precision equipment manufacturing, as well as particle removal. The fine particle spray accommodates a wide range of applications, including cleaning LCD glass substrates and precision parts, uniform cleaning in wide production lines, surface treatment, cooling, and chemical application. Additionally, the one-touch detachable nozzle structure ensures excellent maintenance. [Features] - All-plastic design: Exhibits excellent chemical resistance and achieves long life even in harsh environments. - Two-fluid spray nozzle header: Enables precise fine particle spraying, providing uniform and powerful cleaning performance. - Suitable for particle removal: Achieves high-precision and efficient cleaning through fine particle spraying technology. - Improved maintenance: The one-touch detachable structure of the nozzle allows for easy and quick maintenance work. - Wide range of applications: Suitable for cleaning LCD glass substrates and precision parts, cleaning in wide production lines, surface treatment, cooling, and chemical application. *We also offer a rich lineup of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

This service is aimed at customers in Japan who are considering a purchase, allowing them to experience the usability that may not be easily understood through HP or catalogs, and to try it out in order to make an informed decision before purchasing. Many of our products are eligible, including single-fluid spray nozzles, dual-fluid spray nozzles, air nozzles, tank cleaning nozzles, spray nozzle units, and spray guns. We offer a free rental for up to 15 days (shipping costs to be borne by the customer). *Please inquire about the nozzles available for rental. *The mist fan device is available for paid rental. *We also have a wide range of spray nozzles that are not available for rental. For estimates, custom orders, or any concerns regarding nozzles, please feel free to contact us. We are also available for phone and online consultations at any time.

The "CBIM" series and "SCBIM" series are compact two-fluid general-purpose nozzles. They can spray a very small amount of liquid effectively through control, making them suitable for various applications such as cooling, coating, humidifying, and cleaning. The SCBIM series can achieve the smallest spray amounts, while the CBIM series, which is resistant to clogging and has a total length of less than 30mm, can be used for all these purposes. The "TF-FS" series is a compact air nozzle with a total length of 35mm. It excels in quiet operation and achieves energy savings with strong impact and powerful blowing. The "CVVP" series is a coin-shaped single-fluid nozzle with an extremely thin profile. It can be integrated into equipment without protruding, allowing for installation in tight spaces. *We also have a wide range of other spray nozzles available. For quotes or custom requests, please feel free to contact us with any nozzle-related inquiries. Phone and online consultations are also available at any time.*

The "JJA" and "DOVVA-G" series, made from high-temperature resistant materials, are designed with a large foreign object passage diameter, making them less prone to clogging and suitable for spraying slurries and filtrates containing debris and impurities. They provide stable spraying without uneven particle sizes, improving the efficiency of wastewater combustion and waste liquid treatment. *We also offer a wide range of other spray nozzles. For quotes or custom requests, please feel free to contact us with any nozzle-related inquiries. Phone and online consultations are available at any time.*

The "GSIM2" series is an atomizing nozzle that excels in cooling combustion gases at power plants, adjusting exhaust gas humidity, and spraying waste liquids. It achieves stable processing through high cooling performance, regulating furnace temperatures and cooling gases in cooling towers. The "DOVVA-G" series is a two-fluid spray nozzle with a wide flow adjustment range, designed with a large foreign object passage diameter to minimize clogging, making it suitable for spraying slurry liquids and filtrates. It provides stable spraying with uniform particle size, eliminating spray inconsistencies, and enhances the efficiency of wastewater combustion, waste liquid combustion treatment, and denitrification. The "TAA" and "TJJX" series are both one-fluid spray nozzles suitable for spraying slurry liquids in desulfurization equipment and absorption towers. The "TAA" series is made of SiC with excellent wear resistance and is entirely ceramic, making it lightweight (less than half the weight of metal nozzles). The "TJJX" series uses an X-shaped wobbler to increase the foreign object passage diameter, making it less prone to clogging. *We also have a wide range of other spray nozzles available. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.*

Before laminating sheets with the corrugating machine, we will introduce a humidity control spray header to optimize the moisture content of the sheets, increase line speed, and achieve stable operations and improved productivity. Both the "KB" and "BIM" series have high atomization performance, allowing for appropriate spraying of water onto the target object with a very small spray volume, and they are header types that can accommodate various paper widths. The "BIM" series uses a two-fluid spray nozzle with a large turn-down ratio, enabling adjustment of the spray volume over a wide range. It is controlled by a needle valve, allowing for adjustments to the spray volume and width, making it suitable for narrow paper widths. The "KB" series features the highest atomization performance among our single-fluid nozzles. It can be installed at a lower cost compared to two-fluid nozzles and adjusts the spray volume through electromagnetic valve control. *We also have a wide range of other spray nozzles available. For quotes, custom requests, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are also available at any time.

Effectively suppresses the rise of dust in environments such as crushing sites and garbage pits, as well as during the transportation of iron ore, crushed stone, grains, wood, and biomass chips. It not only improves the working environment but also addresses concerns for the surrounding environment and complaints related to dust. Additionally, it is effective in preventing the scattering of fine raw material powders during the transportation and input of raw materials in grain and feed factories. The two-fluid nozzle "GSIM" series suppresses dust with a large volume of mist. The "BIM" series is suitable for environments where fine dust is present, using a small volume of mist. The one-fluid nozzle "VVP" series uses sprinkling to suppress dust, making it adaptable to a wide range of environments. *We also have a rich lineup of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

The "VVP/VP" and "INVV" series are cleaning spray nozzles with a fan-shaped design that evenly distributes spray during multiple sequences, allowing for water conservation and cost reduction with an appropriate number of nozzles. The INVV series allows for easy one-touch attachment and detachment of the nozzle, significantly reducing maintenance time and effort. The VVP/VP series offers a wide variety of nozzle options, expanding the choices for spray angle and flow rate. For cleaning tunnel-type conveyors, the "ES" series 360-degree rotating cleaning spray nozzle is recommended, as it can wash the entire surface evenly and without inconsistencies. The "KB" and "BIM" series are liquid-saving spray nozzles that spray a very small amount and apply it evenly. The fine mist allows for quick drying of deodorizing liquid, thereby reducing time for the next process. *We also have a rich lineup of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

By simply attaching a two-fluid spray nozzle or air nozzle and connecting it to compressor air, you can use it immediately. The spray ON-OFF can be operated with one hand, making it easy to handle. Additionally, it has an air volume adjustment feature, allowing you to adjust the spray flow rate and air injection amount. It operates only when needed, making it energy-efficient. The "Spray Gun/BIM Gun" series is a handgun equipped with a two-fluid spray nozzle. By attaching a tank to the gun, it uses a suction method to draw up the liquid and spray it. This is effective when you want to save on chemicals or when you need to spray a small amount for a short time. The "Air Gun" series features an air nozzle attached to the handgun that achieves powerful air blowing. It is suitable for use at hand, blowing into narrow gaps, and short-term use. Both series offer free trial products for certain model numbers. You can actually try them out for consideration, so please feel free to contact us. *We also have a wide range of other spray nozzles available. If you have any concerns regarding nozzles, such as quotes or custom orders, please feel free to inquire. We are also accepting phone and online consultations at any time.

This is a comprehensive catalog featuring a lineup of two-fluid spray nozzles that can accommodate everything from fine mist applications to efficient cooling and dust suppression through large-volume spraying. Two-fluid spray nozzles are efficient for cooling, combustion, and surface treatment as they atomize liquid into fine particles. They can achieve significant effects with a small amount of liquid, and the homogeneous mist, free of coarse particles, meets the diverse needs of the field with stable performance. Among them, the highly versatile small-volume spray nozzle "BIM" series offers a "free trial rental" for certain model numbers. You can actually try them out for consideration, so please feel free to contact us. *We also have a rich lineup of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please do not hesitate to reach out. We are also available for phone and online consultations at any time.

The "VVP" series features a top-tier fluid fan-shaped nozzle that sprays in Yamagata, designed to achieve the most uniform flow distribution when arranged in multiple configurations. The "INVV" series also consists of Yamagata fan-shaped nozzles, allowing for the chip part of the nozzle to be easily attached and detached from the main body, enabling the worn chip to be replaced while the nozzle is still attached, thus reducing maintenance time. The "INJJX" series is a one-touch conical nozzle that sprays evenly in a circular pattern, making it suitable for standalone use. The "VVEA" series is a two-fluid fan-shaped nozzle that emits fine mist with an average particle diameter of 50μm or more, delivering strong impact and thickness, penetrating into fine details for precision cleaning. The "INVVEA" series features a one-touch header that reduces the time required for replacement. The "SLNH-H" series is a single-fluid slit nozzle that distributes a thin liquid curtain evenly, contributing to water and chemical cost savings. The "PSN" series is a two-fluid slit nozzle that sprays uniformly and without variation with high impact. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.*

The "INJJX-Y" series features a one-touch detachable conical nozzle that sprays in a circular pattern with a strong peak at the center. Even when the spray pressure is changed, the spray shape remains consistent, making it an excellent choice for etching applications with outstanding stability. Similarly, the "INVVEA" and "INOVVE" series also offer one-touch detachable nozzles, both of which allow for easy nozzle tip replacement, significantly reducing maintenance time. The "JJRP" series includes nozzles made of PTFE and PVDF, designed to maintain a uniform conical spray pattern even at low flow rates. The "JJXP" series features nozzles made of PVDF and high-temperature resistant PVC (HTPVC) for spraying aggressive chemicals. They provide a conical spray pattern with a large foreign object passage diameter, making them less prone to clogging. The "BBXP" series consists of nozzles that spray in a wide 120° circular pattern, allowing for a reduction in the number of nozzles used and cost savings. The "EJX" series includes liquid injection nozzles that promote etching through liquid agitation. The "SLNHK" series features slit nozzles that create a clean liquid curtain without bolts in the liquid flow path, making them ideal for applying etching solutions.

This is a two-fluid spray nozzle suitable for the humidification system for explosion prevention and fire prevention in the rubber kneading (refining) process, as well as for resolving issues caused by insufficient cooling of rubber sheets during the summer. The "AE" series is a humidification system that excels in both spot humidification and wide-area humidification when needed. For localized or limited space humidification, the "SETOV" series and "BIM" series are also recommended, allowing for cost-effective humidification. The "SETOV" series is particularly suitable for situations where clogging is a concern. The "BIM" series can not only provide humidification but also spray around exhaust vents to suppress odors from solvents, contributing to environmental measures in the surrounding area. Additionally, the "BIM" series can directly spray onto rubber sheets during cooling, reducing the surface temperature of the rubber by approximately 10°C (depending on the usage environment). The fine mist allows for efficient cooling without excessively removing release agents. *We also have a wide range of other spray nozzles available. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are always available.*

We introduce products that enhance work efficiency and improve the environment, including cooling after heating, application of release agents, prevention of debris adhesion to molds, and ventilation and air conditioning in factories. The two-fluid spray nozzle series "BIM" and "SETOV" are suitable for cooling and application of release agents. The "BIM" series excels in uniform spraying, allowing for rapid and even cooling of heated products. The "SETOV" series has a large foreign object passage diameter, which suppresses clogging while enabling uniform application of release agents. Additionally, these products are effective as sprays for odor control, contributing to environmental improvement. For the problem of debris clogging air holes in molds, we recommend the air nozzle "TF" series, which features strong impact and high quietness. The "TF-121" sprays air at a width of 121mm, reducing the number of nozzles used and achieving cost reduction. In factories that handle chemicals at high temperatures, ventilation and air conditioning are essential. The energy-saving air conditioning system "CLJ-Dome" is in high demand for semi-outdoor and open spaces, supporting a comfortable working environment. *Other spray nozzles are also available in our lineup. Please feel free to contact us for quotes or custom orders. Phone and online consultations are also available at any time.