H. IKEUCHI & CO., LTD. Product Lineup

The "Dry Fog D.I.Y. Humidification Kit AEKIT" is a humidification set that includes the nozzle unit AKIMist(R) "E", a control unit (control section), a water unit (water filter section), and a piping unit. You can freely select the necessary units according to the space (size) that requires humidification and your existing equipment. It also includes hoses that can be connected to air piping and water faucets, allowing for easy installation and operation by the customer. (Wall-mounted specification) 【Features】 ○ No need for installation by contractors; it can be used by installing it on the wall. ○ Capable of humidifying spaces of approximately 800m². ○ Generates a dry fog that does not get wet. ○ Prevents dryness and static electricity, improving product quality and reducing defect rates. ○ Compared to steam humidification, the running cost is about 1/5. For more details, please contact us or download the catalog.

The portable humidification unit "AE-T," which does not require piping, is easy to move with its casters and achieves pinpoint humidification without wetting the target with fine mist. It is suitable for moisture control of paper and fabric, preventing static electricity and dryness on manufacturing lines, and preventing dust adhesion. To efficiently humidify only the intended areas, it allows for energy-saving and easy humidity management. It can also be utilized for humidification in small warehouses, facilities, and research institutions, supporting product quality improvement and work environment enhancement through the introduction of spot humidification. 【Features】 - Easy to install without the need for piping, and easy to relocate - Pinpoint humidification capability helps avoid issues caused by over-humidification - Contributes to improved product quality through static electricity and dust control *We also offer a wide range of other spray nozzles. Please feel free to contact us for quotes or custom requests regarding nozzles. Phone and online consultations are always available.

The "Directional Change Adapter AE-UT Adapter" is an adapter that can be installed between the humidifier body and the nozzle to change the spray direction to any horizontal or vertical direction. Installation and removal are easy with a one-touch operation. We also offer chemical-resistant options. Please change the direction when the spray is stopped. It is ideal for use in industries such as steel, pollution prevention, machinery, paper, pulp, printing, food, agriculture, forestry, fisheries, vehicles, transportation, and landscape/environment. 【Features】 ○ Adapter for changing the spray direction ○ Adjustable in horizontal and vertical directions ○ Used by installing between the humidifier body and the nozzle ○ Easy one-touch operation for installation and removal ○ Chemical-resistant options available (optional) For more details, please contact us or download the catalog.

The 'Reverse Osmosis Membrane System AKIMiz' is a pure water device using the RO (reverse osmosis) method, designed for pure water (permeate) collection. It is compactly structured from the pre-treatment filter to the pressurized tank. By simply connecting it to the source water and turning on the power, it is easy to generate pure water. It can be combined with an ion exchange type cartridge pure water device (optional). It is suitable for supplying water to high-performance dry fog humidifiers such as AirAKI and AKIMist. [Features] - Compact pure water device for humidifiers - Easily generates pure water by supplying source water - Space-saving compact structure - Easy maintenance - Safe design For more details, please contact us or download the catalog.

The "AKIMist 'E' (for industrial facilities)" is an energy-saving two-fluid humidifier that sprays dry fog. It covers a wide area with high-quality mist that can travel over 4 meters. Up to four nozzles can be attached to a single unit. It uses a small tank that does not generate bacteria, and the main components can be easily maintained with tool-free one-touch removal. Automatic operation is possible with a timer and humidity control device. If a pure water system is used, maintenance-free operation can also be achieved. 【Features】 - Energy-saving two-fluid humidifier that sprays dry fog - Generates non-wetting mist - Prevents dryness and static electricity, improving product quality and reducing defect rates - Running costs are about 1/5 compared to steam humidification - A chemical-resistant version suitable for chemical spraying (TN type) is also available For more details, please contact us or download the catalog.

This system excels in factories and sites facing challenges such as the necessity of ventilation that makes it difficult to raise humidity, or large factory spaces where humidity does not stabilize even if it rises. It is particularly effective in printing factories, including gravure printing, and in environments where organic solvents are heavily used and require significant ventilation. "AirHYBRID" rapidly humidifies the site with powerful single-fluid and dual-fluid humidifiers operating at full capacity during low humidity. As humidity increases, it switches to only the dual-fluid humidifier, achieving precise humidity control. Designed to suit the site environment, it enables energy-saving humidification while keeping costs down. By creating an appropriate humidification environment, it helps suppress dryness and static electricity issues, promotes dust settling, and improves yield, leading to enhanced operational stability and optimized production efficiency. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

In the painting process, improving the defect rate caused by dust adhesion and addressing static electricity issues due to drying in car electronics manufacturing requires a humidification system. It creates the necessary humidity environment and prevents drying. By maintaining humidity at 55% RH, the amount of static charge is significantly reduced. As a result, the rate of dust adhesion decreases, and productivity and quality improve. Additionally, as humidity increases, the occurrence of static electricity is suppressed, effectively addressing issues related to humidity deficiency (mounting defects and electrical connection failures) and static electricity problems (circuit damage and dust adhesion troubles). The humidification systems "AirAKI" and "AirULM" utilize a water spray humidification method, excelling in energy efficiency while significantly reducing carbon dioxide emissions, making them environmentally friendly systems. The control system manages temperature and humidity collectively, eliminating the need for manual tasks such as humidity checks. *We also offer a wide range of other spray nozzles. For quotes, custom requests, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.*

【AirAKI】 is a two-fluid humidification system with extensive experience in electrostatic measures for semiconductor and assembly factories. By spraying dry fog (fine mist with an average particle size of 10μm or less), it can humidify specific areas such as production lines. It effectively addresses issues related to low humidity and electrostatic problems (such as electrostatic discharge, dust adhesion troubles, and fire hazards). It is energy-efficient, significantly reducing running costs compared to steam humidification, and can also lower CO2 emissions. It has numerous achievements across various industries and applications both domestically and internationally. 【Product presentation and demo experience sessions are currently being held!】 Our sales offices in Tokyo, Osaka, Nagoya, and Fukuoka are hosting experience sessions where you can actually experience the mist. We also conduct presentations and visits with sample products and equipment. During the demo experience sessions, you can try our dry fog humidifier and learn about the differences from conventional humidifiers and the benefits of implementation. In addition to introducing the latest case studies, you can consult directly with our specialized staff. Participants in the demo experience sessions have praised us, saying, "They introduced improvement cases with specific numerical values." and "By actually touching the mist, I was able to feel the concept of a non-wet mist."

The mist-type humidification system "AirAKI" directly sprays water as a fine mist for humidification. The mist is so fine that it does not wet when touched, preventing moisture from affecting products or machinery. By using control equipment in conjunction, it maintains the desired humidity and prevents dryness. It also prevents product defects caused by static electricity, the risk of ignition, and contamination from floating debris. In factories where it has been implemented, there have been improvements such as a speed increase of over 10% in coating machines, a 10% reduction in packaging time at shipment, and a more than 5% increase in the good product rate due to the elimination of dust adhesion. 【Demo Experience Events Ongoing!】 Our sales offices in Tokyo, Osaka, Nagoya, and Fukuoka are holding experience events where you can actually experience the mist. During the experience event, you can try out the dry fog humidifier and learn about the differences from conventional humidifiers and the benefits of implementation. In addition to introducing the latest case studies, you can consult directly with our specialized staff. Participants in the demo experience events have praised it, saying, "They introduced improvement cases with specific numbers." and "By actually touching the mist, I was able to feel the non-wetting mist." *Please feel free to contact us for estimates or custom requests. Phone and online consultations are also available at any time.