いけうち（霧のいけうち） List of Products and Services

The mist used in the system is very fine and instantly vaporizes upon contact with objects or people, providing only a cooling sensation. It can be used without worrying about wetting or rusting products and equipment, and it does not cause discomfort to the human body. It generates almost no waste heat during use, significantly contributing to CO2 reduction and energy savings. It can be widely used as an outdoor cooling device for interpersonal settings in semi-outdoor workplaces, open entrances, ship decks, events in urban areas, public facilities, schools, and as a dust control measure at entrances to outdoor areas or waste storage sites. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.*

The "COOLJetter Dome" from Ikeuchi is an indoor cooling system that performs well in spacious environments like factories. It generates almost no waste heat, addressing issues such as carbon dioxide emission regulations. It effectively lowers temperatures over a wide area with minimal electricity and water costs. It can be easily introduced as long as power and water supply are secured. 【Features】 ○ Large space cooling ○ Clean cooling ○ Low cost and energy-saving ○ Easy installation *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

The "COOLJetterDome" sends a fine "non-wetting mist (semi-dry fog)" with an average particle diameter of 10 to 30 micrometers, utilizing the effect of evaporative cooling to lower the temperature of the space, while also providing dust control as an energy-saving system. It is suitable for use in large spaces such as warehouses and factories, effectively cooling as a replacement for air conditioners, spot coolers, and fans. Additionally, it can achieve dust suppression at a significantly lower cost compared to dust removal devices. 【Four Major Benefits of the 'COOLJetterDome'】 1 ⇒ Specially designed for use in large spaces (can be used even in buildings with constant openings) 2 ⇒ Energy-saving + low cost (lower electricity and water bills) 3 ⇒ Environmentally friendly (low heat discharge and compliant with CO2 emission regulations) 4 ⇒ Custom-made design (layout designed to fit the building) *For more details, please refer to the materials. Feel free to contact us with any inquiries.

The "Cool Pescon" is a cooling, humidifying, and pest control system that utilizes fine mist (semi-dry fog). It automatically switches between two modes: "Cooling and Humidifying Mode" and "Pest Control Mode," allowing for the management of high-temperature measures, dryness measures, and pest control measures, which were traditionally done separately, all within one system. This results in reduced equipment costs and streamlining and cost reduction for each measure. 【Features】 ■ Lowers surrounding temperature by up to 8°C due to the heat of vaporization when the mist evaporates ■ Humidifies without wetting crops or equipment inside the greenhouse ■ Sprays pest control solutions in a semi-dry fog form ■ Suitable for cooling in summer and humidifying in winter ■ Achieves automation of pest control operations *For more details, please refer to the PDF materials or feel free to contact us.

The "Cool Pescon CH" is a cooling and humidification system that utilizes the latent heat of vaporization from fine mist (semi-dry fog). Since the mist evaporates quickly, it does not wet crops or the interior of facilities, and it is also possible to control humidity with high precision. There are no issues with wetness that were present in conventional fine mist cooling, creating an environment suitable for crops while also being ideal for heat stress measures for workers. 【Features】 ■ Cools the surrounding temperature by 3 to 5°C using the latent heat of vaporization when the mist evaporates ■ The mist is finer than that of fine mist cooling, so it does not wet crops or the interior of facilities ■ Suitable for cooling in facilities during summer and humidification in winter ■ Comprehensive implementation of on-site surveys, layout design, construction, and after-sales support *For more details, please refer to the PDF materials or feel free to contact us.

The "Cool Pescon CH" is a barn cooling system that uses a non-wetting mist. To prevent a decrease in milk production due to heat stress, it lowers the temperature inside the barn by more than 5°C. Utilizing the evaporative cooling of extremely fine "semi-dry fog," it efficiently cools the barn without wetting the cows or the bedding. 【Features】 ■ Lowers the surrounding temperature by up to 8°C through the evaporative cooling of the mist ■ Does not wet the livestock, feed, or equipment inside the barn ■ Suitable for heat stress and pest control in the barn ■ During installation, system design is conducted along with estimates, and optimal nozzles and equipment placement are proposed ■ After installation, follow-up support is provided *For more details, please refer to the PDF materials or feel free to contact us.

The "COOLJetterDome" is a system that efficiently cools large spaces using the vaporization heat of fine mist. By blowing a "non-wetting mist (semi-dry fog)" with an average particle diameter of 10 to 30 micrometers, it can effectively cool places where heat stroke prevention through air conditioning is difficult, such as buildings where large vehicles are used for work and assembly sites for large structures. Additionally, it is characterized by low electricity costs and water consumption, making it energy-efficient. This also contributes to efforts against global warming and achieving the SDGs. 【Four Major Benefits of the "COOLJetterDome"】 1 ⇒ Specialized for use in large spaces (can be used even in buildings with constant openings) 2 ⇒ Energy-saving + low cost (low electricity and water bills) 3 ⇒ Environmentally friendly (minimal waste heat and low CO2 emissions) 4 ⇒ Custom-made design (layout design tailored to location and building) *For more details, please refer to the materials. Feel free to contact us with any inquiries.

At Maruo Farm in Hyogo Prefecture, the "CoolPescon" system was introduced and installed in September 2014. The conventional fine mist cooling system addresses the issue of elevated body temperature in cows by wetting and cooling them. However, this also results in wet bedding, raising concerns about mastitis due to bacterial growth. After the full operation of this system, it was able to cool the cows and bedding without getting them wet, reducing the temperature inside the barn by 6°C even on hot summer days, significantly contributing to the reduction of heat stress in cows. [Case Study] - Maruo Farm (Hyogo Prefecture) - Raising 120 dairy cows - Requirement: A cooling system that does not pose a risk of mastitis - Implementation Effects: - Compared to 8 cull cows during the same period before implementation, there were zero cull cows after implementation. - Increased milk production: Approximately 10 tons/month increase compared to the previous year. *We also have case studies from Kawagishi Farm in Hyogo Prefecture. For more details, please refer to the catalog or feel free to contact us.

This is an air conditioning device that responds to requests such as "I want to use mist in a way that blends with the landscape" in commercial facilities and public spaces. By embedding the nozzle section, which protruded outside the piping, into the piping, we have eliminated the product's unevenness and achieved a flat shape. The inconspicuous nozzle section harmonizes with buildings, spaces, and interiors. The mist quality is fine and less prone to wetting, and it can also produce a dense spray, resulting in excellent visual effects. The product can be customized according to requests regarding the length and shape of the header, number of nozzles, spray direction, and more. *Additionally, we offer outdoor cooling and refreshing effects with the "Cool Mist System," as well as landscape effects with the "Sea of Clouds System." For quotes and custom requests, please feel free to contact us regarding any concerns about nozzles. Phone and online consultations are also available at any time.

The "COOLJetterDome" is a system that efficiently cools large spaces using the latent heat of vaporization from fine mist. Fine mist (semi-dry fog) is blown by a large fan, and the latent heat from the mist that evaporates instantly effectively cools large factories and warehouses, where it is difficult to prevent heat-related illnesses through air conditioning. It has low running costs (electricity and water consumption), is energy-efficient, and generates very little CO2 emissions and waste heat during cooling, making it a cooling system that is friendly to both people and the environment. 【Four Major Benefits of the "COOLJetterDome"】 1⇒ Specially designed for use in large spaces (can be used even in buildings with constant openings) 2⇒ Energy-saving + low cost (low electricity and water bills) 3⇒ Environmentally conscious (almost no waste heat and low CO2 emissions) 4⇒ Custom-made design (layout design tailored to the location and building) *For more details, please refer to the materials. Feel free to contact us with any inquiries.

We introduce products that enhance work efficiency and improve the environment, including cooling after heating, application of release agents, prevention of debris adhesion to molds, and ventilation and air conditioning in factories. The two-fluid spray nozzle series "BIM" and "SETOV" are suitable for cooling and application of release agents. The "BIM" series excels in uniform spraying, allowing for rapid and even cooling of heated products. The "SETOV" series has a large foreign object passage diameter, which suppresses clogging while enabling uniform application of release agents. Additionally, these products are effective as sprays for odor control, contributing to environmental improvement. For the problem of debris clogging air holes in molds, we recommend the air nozzle "TF" series, which features strong impact and high quietness. The "TF-121" sprays air at a width of 121mm, reducing the number of nozzles used and achieving cost reduction. In factories that handle chemicals at high temperatures, ventilation and air conditioning are essential. The energy-saving air conditioning system "CLJ-Dome" is in high demand for semi-outdoor and open spaces, supporting a comfortable working environment. *Other spray nozzles are also available in our lineup. Please feel free to contact us for quotes or custom orders. Phone and online consultations are also available at any time.

In the extrusion process after heating, we provide guidance on preventing rubber degradation due to heat immediately after extrusion, air blowing after cooling, and explosion-proof humidification in the factory and gasoline cement house (solvent storage room). The "BIM" series excels in uniform spraying and can rapidly and uniformly cool products after heating, contributing to quality improvement. If you use pure water to prevent impurities in the cooling water, we recommend the "AKIMiz" series, and for the use of circulating water, the auto-strainer "ARS" series, which automatically cleans the filter, reducing maintenance time and effort. The "TF-PF" and "SLNB" series are air nozzles of long type and slit type, respectively. During water removal after cooling, they spray air uniformly and powerfully, allowing for drying without gaps or unevenness. The "Cool Mist System" is a system that cools indoor spaces using a single fluid spray nozzle, enabling explosion-proof humidification and cooling in the factory and gasoline cement house (solvent storage room) while keeping costs down. *We also have a wide range of other spray nozzles available. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.