藤川伝導機 Product Lineup

The "VP346E/546E/746E/946E series" is a modular type 3-port residual pressure exhaust valve. It can be connected to the F.R.L. combination "AC-D series." The power consumption is 0.35W (without lamp). Additionally, a check valve is built into the pilot flow path, which responds to pilot pressure drops caused by pressure fluctuations on the primary side. 【Features】 ■ Can be connected to the F.R.L. combination "AC-D series" ■ Space-saving and reduction of piping work is possible ■ Selection with soft startup function is available ■ Power consumption: 0.35W (without lamp) ■ Check valve built into the pilot flow path (responds to pilot pressure drops due to pressure fluctuations on the primary side) *For more details, please download the PDF or feel free to contact us.

• Pressure Control

The "JSB Series" is an air-operated angle seat valve. It is a long-lasting product that can be used for 10 million cycles with air and water, and 3 million cycles with steam. It achieves a large flow rate through optimized flow path design (approximately 2.5 times Cv). Additionally, each part can be replaced, making maintenance easy. Please feel free to contact us when you need assistance. 【Features】 ■ Long lifespan ■ High flow rate ■ Compact size ■ Low leakage ■ Clean design *For more details, please download the PDF or feel free to contact us.

• valve

The "ZFD Series" is an inline air filter of the bidirectional capture type. It features a transparent case (polycarbonate), making it easy to visually confirm foreign substances attached to the element. The case can be removed without tools (screw fastening). Element replacement is easy, and a hex wrench can also be used. 【Features】 ■ Bidirectional capture type ■ Operating pressure range: -100 kPa to 0.5 MPa ■ Captures foreign substances in both vacuum suction and vacuum break, preventing re-dispersion ■ Space-saving *For more details, please download the PDF or feel free to contact us.

• filter

The "HF2A-CG5 series" is a stainless steel cylinder with four times the durability in environments with water droplet splashes. It achieves smooth stopping at the end face, reducing impact and impact noise, and eliminates the need for air cushion adjustment. It features a smooth design with minimal liquid pooling, making it suitable for use in food manufacturing processes. 【Features】 ■ All stainless steel construction (external parts SUS304) ■ Four times the durability in water droplet splash environments ■ No-adjustment air cushion ■ Compatible with stainless steel cylinder CG5 and S series for installation ■ Clean design *For more details, please download the PDF or feel free to contact us.

• cylinder

The "HRZC Series" is a non-fluorocarbon circulating liquid temperature control device, a refrigeration-type thermochiller. By utilizing a double inverter, it achieves high energy efficiency. The DC inverter refrigeration unit and pump inverter reduce power consumption. Additionally, with the optional automatic circulating liquid recovery function, the thermochiller can automatically recover circulating liquid within the tank. 【Features】 ■ GWP = 1, compliant with refrigerant regulations in various countries ■ Air transportable ■ No need for fluorocarbon recovery or disposal costs ■ No simple inspection required based on the Fluorocarbon Emission Control Law *For more details, please download the PDF or feel free to contact us.

• Refrigeration equipment/chiller

The "EX260 series" is a slim fieldbus device approximately 28mm thick. It eliminates the need for branch connectors, reducing wiring space. The SI unit has built-in termination resistors, allowing for ON/OFF switching, so there is no need for external termination resistors. The safety communication protocol transmits safety-related data over the network and can be used with safety standards ISO 13849-1 PL e, IEC 61508/IEC 62061 SIL 3. 【Features】 ■ Compatible with IO-Link ■ IP67 structure ■ Drives up to 32 solenoids ■ Daisy-chain communication connection ■ Complies with functional safety standards *For more details, please download the PDF or feel free to contact us.

• Other server related

The "EX600 Series" is a fieldbus device equipped with functions for detecting disconnections/short circuits in input/output devices and ON/OFF counter functions for input/output signals. It supports connectors mounted on input/output devices, including M12 connectors, M8 connectors, D-sub connectors, and spring-type terminal blocks. Status confirmation and forced output are possible via a web browser. Each unit can be connected in any order, up to a maximum of 9 units. 【Features】 ■ Self-diagnosis function ■ Supports various connectors ■ Web server function ■ Connectable up to 9 units *For more details, please download the PDF or feel free to contact us.

• Other server related

The "TX/TIX series" is a polyethylene tube that excels in chemical resistance and heat resistance. It can be used for a wide range of applications within a broad temperature range, with air and inert gases operating at -45 to 80°C, and water at 0 to 80°C (without freezing). Examples of applications include food, medical, and semiconductor industries. Please feel free to contact us when you need assistance. 【Features】 ■ Tubes with excellent chemical resistance and heat resistance ■ Made from materials compliant with food sanitation laws, FDA, and (EU) No. 10/2011 ■ Versatile for use across a wide temperature range *For more details, please download the PDF or feel free to contact us.

• tube

This document provides information on "electric actuators" compatible with manifold controllers. We introduce the rotary table "LE2R□H Series," which has a maximum angular velocity increased by 40% and a maximum torque increased by 100%. Additionally, it includes information on model selection methods, making it a useful reference when considering implementation. We encourage you to take a look. [Contents] ■ Slider Type / Ball Screw Drive LE2FS□H Series ■ Slider Type / Belt Drive LE2FB□H Series ■ Rod Type LE2Y□H Series ■ Rod Type with Guide LE2YG□H Series ■ Rotary Table LE2R□H Series *For more details, please download the PDF or feel free to contact us.

• Actuator

We would like to introduce our "Non-contact Auto Switch" that we handle. It is a product with UL/CSA certification. It is common with the general (universal) type auto switch "D-M9□". Please feel free to contact us when you need assistance. 【Features】 ■ UL/CSA certification ■ UL/CSA certification + material restrictions for secondary batteries *For more details, please download the PDF or feel free to contact us.

• switch

The "IN574 Series" is a wireless auto switch that can be fully wireless through wireless power transmission and wireless communication. Due to its cable-free design, the risks of issues caused by cable disconnections, the space and wiring labor required for cables, and switch failures due to cable degradation are all zero. Additionally, with the adoption of WPT (Wireless Power Transfer), it operates without batteries, eliminating the need for battery replacement maintenance. 【Features】 ■ Cable-free - Risk of issues due to cable disconnections: "0" - Space and wiring labor for cables: "0" - Switch failures due to cable degradation: "0" ■ Battery-free (wireless power supply/WPT adoption) - Battery replacement maintenance: "0" *For more details, please download the PDF or feel free to contact us.

• switch

We would like to introduce the wireless system "EXW1/EX600-W series" that we handle. The "EXW1 series" has been made compact and lightweight, achieving approximately 81% reduction in volume and about 79% reduction in weight compared to the W series (remote). The "EX600-W series" allows for modular coupling, enabling connection with digital/analog units in configurations of up to 9 units. 【Features】 ■ Noise Resistance - Uses the 2.4GHz ISM frequency band - Adopts frequency hopping every 2ms (fastest) ■ No communication cables required - Reduces wiring labor, space, and costs - Lowers the risk of disconnection *For more details, please download the PDF or feel free to contact us.

• Other network tools

We would like to introduce the "Wireless System/Compact Wireless Base" handled by Fujikawa Denko Co., Ltd. This product allows pairing with wireless remotes and various parameter settings without using the IO Configurator. Additionally, it supports various parameter settings through its web server functionality. 【Possible Settings】 ■ Pairing with wireless remotes ■ Various parameter settings: X10 *For more details, please download the PDF or feel free to contact us.

• Other network tools

The 『IN778-1/IN778-2』 is a membrane nitrogen generator that can simply purify nitrogen-enriched air using only compressed air supply. The membrane nitrogen generator incorporates a bundle of straw-like hollow fiber membranes that have the property of "allowing oxygen to pass through easily, but nitrogen to pass through with difficulty." It can be used compactly and easily at the endpoint use point, and it is not subject to the High-Pressure Gas Safety Act. 【Features】 ■ Compact and easy to use at the endpoint use point ■ Not subject to the High-Pressure Gas Safety Act ■ No power supply required ■ No need for cylinder replacement ■ Modular connection type ■ Compressed air cleanliness grade at the outlet side (humidity and moisture) "2" *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "VPX400 Series" is a safety exhaust valve that allows for modular connections. It integrates three functions, including a dual residual pressure exhaust valve, a soft startup valve, and a main valve mismatch detection. Additionally, in the event of a power outage, it ensures reliable exhaust (spring return), and due to the dual residual pressure exhaust valve, it will still exhaust properly even if one side fails. 【Features】 ■ Space-saving ■ Lightweight ■ Integration of three functions - Dual residual pressure exhaust valve - Soft startup valve - Main valve mismatch detection *For more details, please download the PDF or feel free to contact us.

• Ventilation and Exhaust

The "CG1 Series" is an air cylinder that standardizes the rod end fittings on the rod tip hardware. The flexibility of piping has improved, allowing for placement at 90-degree intervals (in four directions). During the design phase, piping positions can be selected to match the installation conditions, making it more user-friendly. Additionally, three types have been added to the lineup: single-acting, direct mount, and end lock types. 【Features】 ■ Improved piping flexibility - Placement is possible at 90-degree intervals (in four directions) - Piping positions can be selected during the design phase to match installation conditions, enhancing usability ■ Standardization of rod end fittings on the rod tip hardware ■ Compatible with existing products ■ Abundant mounting support brackets ■ Mounting support that fits the installation conditions is possible *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce the air cylinder 'CG3 Series' handled by Fujikawa Denko Co., Ltd. This product is a short type, with a maximum length reduction of 51mm compared to the conventional model "CG1," and a maximum weight reduction of 24%. Additionally, we offer two types in our lineup: male thread shape and female thread shape. 【Features】 ■ Maximum length reduction of 51mm ■ Maximum weight reduction of 24% ■ Two types in the lineup: male thread shape and female thread shape *For more details, please download the PDF or feel free to contact us.

• cylinder

The "Silencer-equipped Exhaust Throttle Valve" is a product that integrates the throttle valve and silencer, reducing assembly labor and the number of parts. Since speed adjustment can be done on the valve side, it is possible to adjust the speed even when the cylinder is installed in hard-to-reach high places or narrow spaces. Additionally, by adopting a resin body, the weight has been reduced by up to 80% compared to conventional metal bodies. 【Features】 ■ Reduction of assembly labor and number of parts ■ Option for push-lock type with small scale ■ Resin body (weight reduced by up to 80%: 34g → 7.6g) ■ Speed adjustment possible on the valve side ■ Built-in silencer: noise reduction effect of over 20dB at maximum flow rate *For more details, please download the PDF or feel free to contact us.

• Other FA equipment

We would like to introduce the "Stainless Cylinder" handled by Fujikawa Denko Co., Ltd. The compact type has a total length reduced by 21% compared to existing products, and the weight has been reduced by up to 50%. Additionally, the water-resistant enhanced type features a special scraper that improves durability by four times in environments with water droplet splashes. 【Features】 ■ Compact and lightweight (compared to existing products) ・ Total length reduced by 21%: 175mm → 139mm ・ Weight reduced by up to 50%: 0.75kg → 0.38kg ■ Durability over four times greater in water droplet splash environments (compared to existing products) ■ Packing material: FKM or NBR available for selection ■ Laser-printed nameplate available for selection *For more details, please download the PDF or feel free to contact us.

• cylinder

We offer a high-capacity type of "Digital Flow Switch" that can measure a wide range of flow rates with a single unit. By adopting a diverging structure, we reduce the degradation of accuracy and sensor damage caused by moisture and foreign substances in the air adhering to the sensor part. Additionally, the cumulative pulse conversion values can be selected from four types according to the flow rate range, and the cumulative pulse width can be set between 50 to 100 ms. 【Features】 ■ Improved moisture and foreign substance resistance ■ Through-bore structure ・75% reduction in pressure loss (from 20 kPa to 5 kPa) ・Maintenance-free within the flow path ■ Usable not only for air and nitrogen but also for carbon dioxide and argon *For more details, please download the PDF or feel free to contact us.

• switch

We would like to introduce the 'HYB Series' handled by Fujikawa Denko Co., Ltd. This product is an air cylinder with improved waterproof properties and an easy-to-clean design, with a lifespan approximately five times longer compared to our previous models. Additionally, a plug is provided for the unused mounting screw section to prevent liquid residue in the threaded area. 【Features】 ■ Easy-to-clean design ■ Improved waterproof properties ■ Lifespan approximately five times longer ■ Compatible with food machinery grease (NSF-H1 certified) ■ Choice of external seal materials: NBR or FKM *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce the 'PU Series' handled by Fujikawa Denko Co., Ltd. This product is a pulse blow unit that improves the continuous blow ratio removal efficiency by 35% through intermittent air blows that collide repeatedly. Additionally, it reduces air consumption and achieves low pressure loss due to its large effective cross-sectional area (10.3 mm²). 【Features】 ■ Adjustable frequency (operating frequency) ■ Can be used in a stationary setup with bracket mounting ■ Can be used in combination with blow guns ■ Compact and lightweight ■ 50% reduction in CO2 emissions (air consumption) *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "AP20-D" is a modular type relief valve that releases pressure above the set value to the atmosphere, maintaining the set pressure. In conventional designs, the air inlet and exhaust ports are aligned in a straight line, requiring branching pipes for connection to downstream equipment. However, by using a modular connection, we have reduced piping labor and eliminated the need for branching pipes. Additionally, you can choose from square embedded pressure gauges, round pressure gauges, and round pressure gauges with color zones, and the handle shape is designed to be easy to operate with fingers during unlocking. 【Features】 ■ Reduced piping labor ■ Selectable pressure gauges ■ Easy-to-operate handle shape *For more details, please download the PDF or feel free to contact us.

• valve

The "PFES Series" is a remote control valve (electric speed controller) that has become capable of "remote operation" through "electrification" by incorporating a motor into the speed controller. It allows for adjustment of the actuator's speed and the device's flow rate "from a remote location," "without going to the site," and "without stopping the equipment." Additionally, if you are unable to send electrical signals immediately on-site, manual adjustments using a handle are also possible. 【Features】 ■ Improved maintainability ■ Reduced adjustment labor ■ Increased productivity ■ Reduced downtime ■ Remote operation ■ Electrification *For more details, please download the PDF or feel free to contact us.

• controller

We would like to introduce the vacuum pad with anti-slip feature, the 'ZP3M Series', handled by Fujikawa Conductive Co., Ltd. By adopting the highly wear-resistant FS61 (fluorine-based rubber), the lifespan has improved to more than twice that of urethane, reducing the frequency of pad replacements. Additionally, the diagonal ribs are arranged radially to ensure grip in all directions, preventing lateral slipping of the workpiece and enabling stable suction transport. 【Features】 ■ Improved lifespan (more than twice that of urethane) ■ Anti-slip special ribs ・Prevents lateral slipping of the workpiece ・Enables stable suction transport ■ Compatible with oil film-covered workpieces *For more details, please download the PDF or feel free to contact us.

• Other machine elements

This catalog provides a comprehensive introduction to refrigerated air dryers designed for the EU, Asia, and Oceania markets. In addition to the standard "IDFA□E/□ Series," we also introduce the large "IDFA□F Series," which is designed for high-temperature environments, reduces heat discharge by up to 25%, and helps suppress ambient temperature rise with its energy-saving design. Furthermore, we have included information on how to select models, standard specifications, structural principle diagrams (air and refrigerant circuit diagrams), and external dimension diagrams, so please make use of these resources. [Included Content (Partial)] ■ Standard Series IDFA3E–15E1 ■ Standard Series IDFA60–90 ■ Large Series IDFA100F–150F *For more details, please download the PDF or feel free to contact us.

• Cooling Equipment

We would like to introduce the "Mounting Kit for Multi-Axis Systems" handled by Fujikawa Denko Co., Ltd. This product enables the realization of an XYZ unit and allows for easy system construction using the equipment selection program. For compatible actuators, the X-Y axis options include ball screw drive, belt drive, and high-rigidity high-precision slide types, while the Z axis is available in a guide rod type. 【Compatible Controllers/Drivers (for Single Axis)】 ■JXC51/61 Series ■JXC91/E1/P1/D1/L1/M1 Series ■LECS□-T/LECY□ Series *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "CKZ5T Series" is a power clamp cylinder that achieves miniaturization through a new structure, shortening the overall length by up to 49mm. It features a fully closed structure made of an aluminum body, resulting in significant weight reduction, with a mass decrease of up to 23%. Additionally, the depth has been reduced by up to 17.3mm. It is compatible with existing products "CKZT" and "CKZ3T." 【Features】 ■ Miniaturization achieved through a new structure (overall length shortened by up to 49mm) ■ Depth reduced by up to 17.3mm ■ Significant weight reduction due to aluminum body (mass reduced by up to 23%) ■ Added sizes of ø40 and ø80 ■ High clamping force of 4000N (ø63, arm length 100mm, at 0.5MPa) *For more details, please download the PDF or feel free to contact us.

• cylinder

The "Air Servo Cylinder" is a device that enables multi-point positioning and control of air cylinders. It features easy maintenance due to its unitized design, allowing for the replacement of valve units, pilot valves, controller assemblies, packing sets, and more. Additionally, if the supply of air and electricity to the air servo cylinder is stopped, the air from the emergency tank can be supplied to the FA and FB ports, allowing for manual operation of the air cylinder's rod. 【Features】 ■ Fast response and high repeat positioning accuracy ■ Easy maintenance due to unitization ■ Simple initial setup ■ Self-diagnosis capability (with LED indicators and signal output) ■ Emergency stop of the piston operation when air and electricity are halted *For more details, please download the PDF or feel free to contact us.

• Other FA equipment

The "Collaborative Robot Air Gripper" is a product that integrates the peripheral devices necessary for gripper operation into a single unit. When selecting the normal open or normal close valve, if power is cut off, the fingers will maintain either the open or closed state. Additionally, we offer three types of grippers: standard type, three-finger type, and long stroke type, depending on the workpiece. 【Features】 ■ Three types of grippers available according to the workpiece ■ Compatible with 12 companies' collaborative robots ■ Air consumption reduced by up to 80% ■ Three types of tool changers can be selected ■ Temporary workpiece drop prevention is possible *For more details, please download the PDF or feel free to contact us.

• Other industrial robots

This catalog provides an overview of the refrigerated air dryer 'IDFB Series' designed for North America and Latin America. It includes a variety of information such as selection methods for models, model designation methods, standard usage, structural principle diagrams, and dimensional drawings. Additionally, it covers optional specifications, separately sold accessories, and individual product precautions, so please make use of it. 【Contents (partial)】 ■IDFB3E–15E ・Optional specifications ・Separately sold accessories ■IDFB60–90 ・Optional specifications *For more details, please download the PDF or feel free to contact us.

• Cooling system

We would like to introduce the various "electromagnetic holders" handled by Fujikawa Denko Co., Ltd. With electrical control, it is possible to remotely operate the ON/OFF of the magnetic force, making it useful for automatic material feeding in presses, preventing deflection of shearing materials, and in various automation equipment and industrial robot gripping parts. We also handle types such as the "thin electromagnetic holder," aimed at space-saving and lightweight design. [Features] ■ Remote operation of magnetic force ON/OFF through electrical control ■ Space-saving and lightweight (thin type) *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the various "Lifting Magnets" handled by Fujikawa Denko Co., Ltd. The "Permanent Magnet Lifting Magnet with V-Type Attachment for Angles" allows for the transportation of equal leg angle steel loaded on-site directly to the next process without any modifications. Additionally, we also offer balance boards that enable two-point lifting when transporting long steel plates, round steel, and pipes by connecting lifting magnets. 【Features】 ■ The V surface fits perfectly with angle steel, achieving more stable lifting. ■ The permanent magnet lifting magnet is equipped with an attachment compatible with both the transported items and equal leg angle steel. *For more details, please download the PDF or feel free to contact us.

• Other conveying machines

The "Electromagnetic Rail Roller" is a product installed inside the belt of a conveyor belt for transportation, supporting the transfer and enhancing work efficiency. It is used for vertical and inclined transportation of actual cans, empty cans, and for transporting press scraps and chips in various conveyor belts during the manufacturing process. Additionally, since it is attracted by magnets, it does not scratch the products or transported items. 【Features】 - Installed inside the belt of a conveyor belt for transportation, supporting the transfer - Attracted by magnets, preventing scratches on products or transported items *For more details, please download the PDF or feel free to contact us.

• roller

We would like to introduce the "Magnet Conveyor" handled by Fujikawa Denko Co., Ltd. The "Spiral Magnet Conveyor" arranges internal magnets in a spiral shape, transporting chips through a spiral sliding movement. As a result, oil droplets can naturally fall off during transportation, allowing for oil removal. The "Magnet Chip Conveyor" transports and removes cutting chips generated from machine tools while allowing for oil removal through natural dripping. 【Features of the Spiral Magnet Conveyor】 ■ The mechanical moving (rotating) parts are enclosed in a sealed cylinder, eliminating concerns about contact damage. ■ Simple structure, requiring almost no maintenance. ■ Energy-saving with the use of permanent magnets. ■ Customizable to your desired length. *For more details, please download the PDF or feel free to contact us.

• Other conveying machines
• Other sorting machines and foreign object removal equipment

We would like to introduce the various "transport assistance tools" handled by Fujikawa Denko Co., Ltd. The "Float Separator" allows for the separation of stacked steel plates during pressing and shearing operations, pulling them apart one by one through magnetic repulsion. The "Thin Float Separator" is thinner and more compact compared to standard models, making it suitable for installation in tight spaces. 【Features of the Float Separator】 ■ Can be used for separation at the outlet of an automatic supply line for steel plates ■ Capable of handling irregularly shaped steel plates, such as press semi-finished products and disc shapes *For more details, please download the PDF or feel free to contact us.

• Other conveying machines

We would like to introduce various "Hand Magnet Tools" handled by Fujikawa Conductive Machinery Co., Ltd. The "Hand Magnet" allows you to easily turn the magnetic force ON/OFF with a light pull of the lever using one hand, releasing the attracted objects. It can be used in various fields such as the collection of metal scraps, material sorting of screws, and chip recovery from casting sand. Additionally, we offer the "Tettori-kun," which is waterproof and can be used for extracting and recovering iron pieces mixed in liquid tanks, as well as the "Tettori-kun Jr," which is useful for removing chips that have gotten into narrow spaces. 【Features of the Hand Magnet】 - Easily turn the magnetic force ON/OFF with a light pull of the lever using one hand, releasing attracted objects. - Usable in various fields such as the collection of metal scraps, material sorting of screws, and chip recovery from casting sand. *For more details, please download the PDF or feel free to contact us.

• Other sorting machines and foreign object removal equipment

We would like to introduce the various "magnetic separation equipment" handled by Fujikawa Denko Co., Ltd. The "permanent magnet suspended magnetic separator" is easy to maintain and robust due to its permanent magnet design, and it does not require a power supply. The "drum separator" features a drum housed within a casing, driven by a motor to rotate the permanent magnet drum. Raw materials are fed from a hopper, and the system automatically separates iron pieces and missing parts from the raw materials. 【Features of the Permanent Magnet Suspended Magnetic Separator】 ■ Easy maintenance ■ Robust ■ No power supply required ■ Weather-resistant mechanism, allowing for outdoor installation *For more details, please download the PDF or feel free to contact us.

• Other sorting machines and foreign object removal equipment

We would like to introduce the various "sanitary" products handled by Fujikawa Denko Co., Ltd. The "strong magnetic bar" features a waterproof structure that allows for use in liquids and is primarily used for the removal of metal foreign substances during the manufacturing processes of food and pharmaceuticals. Additionally, the "strong magnetic lattice-type magnet" is a unit that arranges sanitary specification magnetic bars in a lattice configuration. 【Features of the Strong Magnetic Bar】 ■ High-quality finish with sanitary specifications ■ Waterproof structure suitable for use in liquids ■ Length dimensions can be manufactured to specified sizes *For more details, please download the PDF or feel free to contact us.

• Other sorting machines and foreign object removal equipment

We would like to introduce the "Lifting Magnet" handled by Fujikawa Denko Co., Ltd. This product achieves high magnetic force effects even though it is compact and lightweight, and it does not require a power supply, eliminating issues such as power outages or distribution troubles. Additionally, the CPL-100/CPL-300 models are compatible with balance boards, allowing for the two-point suspension of large steel plates and long round steel bars using a balance board. 【Features】 - No power supply required, eliminating power outages or distribution troubles - High magnetic force effects achieved despite being compact and lightweight - High safety due to strong permanent magnets for adhesion - Compatible with both flat and round steel - CPL-100/CPL-300 models are compatible with balance boards *For more details, please download the PDF or feel free to contact us.

• Other Wagons and Transport

We would like to introduce our standard type "Magnet Base" that we handle. It can be attached to flat surfaces, vertical surfaces, and R surfaces on iron plates and working equipment, holding measuring instruments such as dial gauges. Additionally, we offer various parts such as dial gauge mounting brackets, main columns, support columns, upper brackets, lower brackets, and bases, so please feel free to contact us. 【Features】 ■ Main column 360° turning, 75° tilt possible ■ Fine adjustment function included (CMB-V/R/W only) *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

At Fujikawa Denko Co., Ltd., we sell magnetic base components starting from one piece. By attaching a vice to the tip of the support shaft, it can be used as a fixture for temporarily holding workpieces during assembly or for holding during manual finishing processes. Combining the support and the lower bracket allows for the extension of the gauge mounting section, enabling measurements in areas that standard models cannot reach. 【Features】 ■ Sold from one piece ■ Custom production of shafts and other specified dimensions is possible in small lots *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the flexible type "Magnet Base" that we handle. It can be locked and unlocked simply by tightening the dial, and when unlocking, it loosens from the top, preventing the tip from falling off. Additionally, the arm of the CMB-FX is a flexible type that can be bent freely, and unlike the CMB-FSP, it has a fine adjustment function at the tip. 【Features】 ■ Locking and unlocking can be done simply by tightening the dial ■ When unlocking, it loosens from the top, preventing the tip from falling off ■ The arm of the CMB-FX is a flexible type that can be bent freely ■ The tip of the CMB-FX has a fine adjustment function, unlike the CMB-FSP *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "Holder Base" handled by Fujikawa Denko Co., Ltd. It can be used to set up jigs or poles in screw holes, and can also be utilized for centers and laser bases, functioning as a holder with an ON/OFF magnetic switching mechanism, allowing for various applications. Additionally, we offer the "Magnet Dresser Holder," a dressing tool for grinding magnets that holds the dresser with a magnetic holder base. 【Features】 ■ Can be used to set up jigs or poles in screw holes, as well as for centers and laser bases ■ Prevents the intrusion of unnecessary debris and fine iron powder without ceiling holes (version without tapped holes) *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the "Permanent Magnet Holder" handled by Fujikawa Conductive Co., Ltd. This product can be widely applied for incorporation into press equipment and molds, as well as for workpiece holding. Additionally, versions with screw holes can be integrated into jigs. It can be used for applications such as holding drawings, scales, and small parts. 【Features】 ■ Widely applicable for incorporation into press equipment and molds, as well as for workpiece holding ■ Versions with screw holes can also be integrated into jigs *For more details, please download the PDF or feel free to contact us.

• Other machine elements