藤川伝導機 List of Products and Services

We would like to introduce the "High-Quality Deep Groove Ball Bearings for Motors" handled by Fujikawa Denko Co., Ltd. It reduces sound pressure in the frequency range (1,000Hz to 5,000Hz) that people find particularly unpleasant. It is suitable for use in household appliance motors, industrial motors, and other machinery used indoors or near people. 【Bearing Series】 ■60 ■62 ■63 ■69 *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

The "Model GBB" is a versatile clamp that does not require a U-cut for the mold. When hydraulic pressure is supplied, the piston rises, and the clamp lever rotates around the pin to lock the mold. When the hydraulic pressure is released, the clamp lever is released by the force of the return spring, and the piston descends, entering the release state. The GBB clamp can then slide within the T-slot. 【System Configuration Example】 ■ Upper Mold Clamp: GBB Clamp ■ Lower Mold Clamp: GBB Clamp ■ Mold In/Out: MR□ Pre-Roller + RA Die Lifter ■ Hydraulic Source: CP□ Unit / CQ□ Unit *For more details, please refer to the PDF materials or feel free to contact us.

• Vice Clamps

The "Model MV" is a compact air valve unit that controls the air cylinder of an automatic slide clamp, achieving full automation. It features a directional control valve that switches the direction of air through electric control. It controls the air supplied to the air cylinder, allowing for the automatic sliding of GKE/GKF clamps. 【Lineup】 ■MV3013 ■MV3023 ■MV3033 *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "iTrapSensor iT5 Series" is a sensor that simultaneously measures surface temperature and ultrasonic waves, or temperature and pressure, and transmits the data to monitoring systems. By continuously monitoring the numerous valves, pipes, and equipment scattered throughout the factory, it can detect abnormalities early and improve the reliability of the equipment. Additionally, for equipment installed in hard-to-inspect locations such as high places, pits, and high-temperature environments, it can reduce the burden of on-site patrols. 【Features】 - Transmits measurement information of surface temperature and ultrasonic waves, or temperature and pressure via wireless or wired communication - Supports operation determination of steam traps - Intrinsically safe explosion-proof specification - Achieves long-term operation (approximately 10 years) - Easy to attach and detach with dedicated fixtures - Data can be collected, stored, and viewed *For more details, please refer to the PDF materials or feel free to contact us.

• Thermometer
• Pressure

This catalog introduces the "Clamp Lever" handled by Fujikawa Denko Co., Ltd. It features the mini clamp levers with a long hole washer integrated type, "LDCM-LWP" and "LDCMS-LWP," the all-stainless steel version "LDCMS-LWP-AS," and the clamp levers with a long hole washer integrated type "LDM-LWP/LDMS-LWP," among others. Please make use of this for selecting products. 【Contents Listed (Partial)】 ■LDCM-LWP ■LDCMS-LWP ■LDCMS-LWP-AS ■LDCMS-LWP-CR ■LDCMS-LWP-NI *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

We would like to introduce our "Small Regulator Bracket." It is compatible with major small regulators and can accommodate up to three units. We offer a total of seven different shapes, including straight and L-shaped, allowing for installation in various locations of your equipment. Please feel free to contact us if you have any requests. 【Features】 - Compatible with major small regulators - Can install up to three regulators - Available in seven different shapes, including straight and L-shaped - Can be installed in various locations of your equipment *For more details, please download the PDF or feel free to contact us.

• bracket

We would like to introduce our product, "AAG/Aluminum Alloy Plate." Among aluminum alloys, it has moderate strength and is a representative alloy used for tools, machine parts, and more. Its corrosion resistance and thermal conductivity are superior to those of steel. Additionally, as an Al-Mg series alloy, it has excellent weldability, and its specific gravity is about one-third that of steel, making it easy to handle. 【Features】 ■ Has moderate strength among aluminum alloys ■ Used for tools, machine parts, etc. ■ Superior corrosion resistance and thermal conductivity compared to steel ■ Excellent weldability due to being an Al-Mg series alloy *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "CME-EC350WPR" is a rechargeable waterproof LED light that can be operated remotely with a remote control, allowing for operation from a distance. The charging port is protected with a cap to enhance dust resistance and durability. It comes with a magnetic holder, enabling the main light to be securely attached to magnetic surfaces. Additionally, we also offer the "CME-EC450WPR," which has a brightness of 450 lumens. Please feel free to contact us if you have any requests. 【Features】 ■ Highest level of dust and waterproof performance for underwater lighting ■ Can be operated remotely with a remote control ■ The separate magnetic holder allows the main light to be securely attached ■ Rechargeable battery that can be used repeatedly ■ USB output of 2.1A, capable of charging smartphones and tablets *For more details, please download the PDF or feel free to contact us.

• LED lighting

The "TZ" is a compact and high-precision lift table that employs a unique wedge mechanism for vertical positioning. It comes in two types: a high-precision, high-rigidity type that incorporates roller-type linear guide equipment, and a standard type that offers excellent cost performance, with table dimensions of 120mm and 200mm available. Two types of wedge reduction ratios are provided, allowing for vertical positioning with a maximum stroke of 24mm. 【Features】 ■ Compact precision lift table ■ Two types and two sizes to choose from based on application ■ Higher-level positioning achievable with the installation of a linear encoder ■ Standard equipped with sensors ■ Usable as a Z-axis in multi-axis configurations *For more details, please download the PDF or feel free to contact us.

• Other work tools

This catalog introduces the control equipment for pneumatic circuits handled by Konan Electric Co., Ltd. From general-purpose types that emphasize basic performance to specialized types segmented by industry and application, we have a confident lineup that accurately captures the ever-increasing needs for automation and labor-saving. Please make use of this when selecting products. [Contents] ■ Conditioning equipment ■ Directional control valves ■ Auxiliary equipment for instrumentation ■ Flow control valves ■ Others *For more details, please download the PDF or feel free to contact us.

• Other process controls

This catalog introduces the vacuum equipment for automated transport handled by our company, Schmalz GmbH. With high functionality and excellent cost-effectiveness, it contributes to the optimization of devices and manufacturing processes. It includes vacuum pads and mounting components, as well as vacuum generators, valves, and system monitoring. Please make use of this information when selecting products. [Contents (partial)] ■ Industry sectors / Featured products ■ Vacuum pads ■ Mounting components for vacuum pads ■ Vacuum generators ■ Valves *For more details, please download the PDF or feel free to contact us.

• Vacuum Equipment

The "WHA" is an air swing clamp that achieves high speed with three lead grooves and an outer race. It features high speed, high rigidity, and a swing completion position repeatability accuracy of ±0.5°. Due to the high repeatability accuracy (±0.5°) at the swing completion position, it clamps securely even at small clamp points. The outer race rotates in accordance with the rotation of the rod and steel balls, minimizing resistance during turning to the utmost limit. Additionally, we offer the air speed control valve "BZW" and manifold blocks, so please feel free to contact us if you have any requests. 【Features】 ■ Ball-type swing mechanism with an outer race ■ High precision swing completion position repeatability accuracy *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

The "ROBOTRAX TKRB14H10" is a mini-sized cable carrier that is suitable for protecting cables in small industrial robots. While downsizing, it maintains the basic performance such as cable protection effectiveness and customer-friendly design. It adds peace of mind by avoiding the risk of equipment stoppage due to cable breakage in areas where conventional products were too large to install. 【Features】 ■ High strength with wire ■ Easy to handle ■ High cable protection performance *For more details, please download the PDF or feel free to contact us.

• Other cable related products

This catalog introduces the industrial blower system components handled by our company. We offer a wide range of speed controllers that achieve appropriate ventilation under various conditions. It also includes control switches, control system components, and inverter fans. Please take a moment to read through it. 【Contents】 ■ Control Switches ■ Control System Components ■ Inverter Fans ■ Speed Controllers *For more details, please download the PDF or feel free to contact us.

• Other air conditioning equipment

This catalog introduces the "NTN miniature and small diameter ball bearings" that we handle. It includes characteristics of sealed and shielded bearings, as well as a dimensional table for radial ball bearings. Additionally, there are technical explanations regarding bearing materials, precision, rated load and lifespan, and fits. We encourage you to read it. 【Contents (partial)】 ■ Characteristics of sealed and shielded bearings ■ Representation of basic numbers and auxiliary symbols ■ Dimensional table index ■ Dimensional table for radial ball bearings: metric system ■ Dimensional table for radial ball bearings: inch system *For more details, please download the PDF or feel free to contact us.

• Metal bearings

The "CRP Series" is a compact compressor designed to serve as an air source and vacuum source for collaborative robot grippers. It can be used as either a positive pressure or vacuum pressure (vacuum pump) with a single unit, and the noise level when equipped with the silencer "ANB1-01" is below 55dB. It can achieve a gripping force of 60cpm at 0.3MPa, and it features an alarm function that lights up or blinks in case of an abnormal situation. 【Features】 ■ Can be used as either a positive pressure or vacuum pressure (vacuum pump) with a single unit ■ Oil-free ■ Noise: below 55dB ■ Maximum air discharge volume of 10L/min (ANR) ■ Reaches a vacuum pressure of -70kPa in 0.2 seconds *For more details, please download the PDF or feel free to contact us.

• Other machine tools

We would like to introduce the dual rod cylinder "CXS2 Series" that we handle. The mounting dimensions are compatible with the existing CXS series, with a permissible kinetic energy of 0.016J and a maximum piston speed of 800mm/s. The maximum standard stroke has been expanded. The inner diameter of the tube has been increased to 16mm, while the outer dimensions remain the same at ø15, resulting in an approximately 14% increase in thrust. Additionally, a maximum stroke adjustment of -5mm is possible. 【Features】 ■ Permissible kinetic energy: 0.016J ■ Maximum piston speed: 800mm/s ■ Expanded maximum standard stroke ■ Double pistons for double thrust ■ Dual rods for non-rotation accuracy of ±0.1° *For more details, please download the PDF or feel free to contact us.

• cylinder

The HRS400 Series is a standard type of thermochiller. It is air-cooled and has a cooling capacity of 38 kW, with a set temperature range of 5 to 35°C. The maximum ambient temperature for use is 45°C, and the temperature stability is ±0.1°C, with a waterproof structure rated IPX4. Additionally, the adoption of a touch panel has improved the product's settings, operation, and visibility. 【Specifications (partial)】 ■ Cooling capacity: 38 kW ■ Power supply ・3-phase 380–415V (50Hz/60Hz) ・3-phase 460–480V (60Hz) ■ Set temperature range: 5–35°C ■ Maximum ambient temperature for use: 45°C *For more details, please download the PDF or feel free to contact us.

• Chiller

The "iQ Monozukuri Process Remote Monitoring" is an application package that easily enables the IoT transformation of production sites, allowing for the collection, visualization, and centralized management of information from multiple devices. Through the on-site GOT, it displays the operational status of the production site, as well as operation logs and alarm information for each device on the GT SoftGOT2000. By analyzing this data, it supports overall process improvement and productivity enhancement in the production environment. 【Features】 ■ Easily build systems by integrating with existing equipment ■ Analyze equipment status using the included template screens ■ Centrally manage information that was previously managed individually ■ Remote monitoring is also easy with a mobile app *For more details, please download the PDF or feel free to contact us.

• Other security and surveillance systems

The "GBP" is a block-fixed type clamp that does not require a T-groove. When hydraulic pressure is supplied, the piston rises, and the clamp lever rotates around the pin to lock the mold. When the hydraulic pressure is released, the clamp lever is released by the force of the lever return spring, and the piston descends, resulting in a release state. 【Features】 ■ Easy to install on existing press machines due to bolt fixation ■ Manufactured to match the thickness of the clamping part of the mold you will be using *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

We would like to introduce our "Die Casting Mold Cylinder Series." Our lineup includes the high-power core push cylinder "PCE," which features a built-in mechanical lock mechanism, and the high-speed core pull cylinder "PCB," which can replace conventional core cylinders. Additionally, we offer the high-power core pull cylinders "PCA/PCC," which contribute to the miniaturization of molds, and the small-sized high-speed core pull cylinder "PCM." Please feel free to contact us if you have any inquiries. 【Features】 ■ High-power core push cylinder "PCE": Push ■ High-speed core pull cylinder "PCB": Pull ■ Small-sized high-speed core pull cylinder "PCM": Pull ■ High-power core pull cylinder "PCA": Pull ■ High-power core pull cylinder "PCC": Pull *For more details, please download the PDF or feel free to contact us.

• cylinder

This catalog introduces the "TLV Valve Series" that we handle. Maintaining its uniqueness, the lineup has been further strengthened to solve various plant challenges all at once. It includes ball butterfly valves, bellows valves, globe valves, and more. In addition to product introductions, it also includes usage examples, making it a handy reference book. 【Contents (partial)】 ■ Ball Butterfly Valves ■ Bellows Valves ■ Various Valve Series ■ Selection Table ■ Manual Valves *For more details, please download the PDF or feel free to contact us.

• valve

The "FGCFA-A" is a clamp that connects two shafts at any angle. Friction generated between the main body and the spring holds the position of the angular hole, allowing for temporary adjustment of the angle between the shafts even when the hexagon socket bolt is loosened. Since it uses a method of sliding the angular hole to clamp the shaft, it can be used with shafts that have large tolerances, and inserting the shafts is also easy. Additionally, we also offer a lever type "FGCFA-B" and stainless steel versions "FGCFS-A/B." 【Features】 ■ Tightens the hexagon socket bolt to simultaneously fix the angle and position of the two shafts ■ Suitable for fixing side guides and sensors on conveyor lines ■ Two types of surface treatment for the main body *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

We would like to introduce our caliper 'BMK950S' <single piston>. The single piston structure reduces costs with a minimal number of components. By changing the air pressure, you can adjust the holding force and braking force. Additionally, it is compact and reduces the required installation space by 50%. We also offer the double piston structure 'BMK1550D'. Please feel free to contact us if you have any requests. 【BMK950S Features】 ■ Single piston structure ■ Adjustable holding force and braking force by changing air pressure ■ Space-saving *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "Air Tube Bracket" features a clamp structure made of sponge rubber, allowing for easy fixation of various sizes without crushing the air tube. The materials include stainless steel and aluminum. It improves layouts that tend to become cluttered and proves effective during maintenance. Please feel free to contact us when you need assistance. 【Types (excerpt)】 ■ Type Z (for cable ties) ■ Saddle type ■ Type L1 ■ Type L2 ■ Type Z1 ■ Type Z2 *For more details, please download the PDF or feel free to contact us.

• bracket

We would like to introduce "Zenebagiya," which we handle. Thanks to the fully utilized features of Zeneba, a variety of designs are possible due to the diverse ratios and abundant stock. It is mass-produced through specialized machinery and streamlined production management. Please feel free to contact us when you need assistance. 【Features】 ■ Smooth rotation ■ Quality assurance ■ Free selection of ratios ■ Low price *For more details, please download the PDF or feel free to contact us.

• Drive system parts

We would like to introduce the "Coolant Separator" that we handle. By arranging and combining internal magnets and magnetic fields, it can accommodate various grinding debris and sludge, from fine sludge to materials with weak magnetism, as well as needle-like and thread-like shapes. An optional super magnet drum with a maximum surface magnetic flux density of 1200mT can also be manufactured according to your needs. 【Features】 ■ Extends the lifespan of filters in coolant purification circulation systems ■ Reduces scratches on workpieces, enabling precision machining ■ Improves the lifespan of cutting tools, allowing for more precise machining and finishing *For more details, please download the PDF or feel free to contact us.

• Other cleaning machines

The "TSLH M/CTLH M" is a high-precision and high-rigidity positioning table composed of a cast iron slide table and bed with high rigidity and excellent vibration damping properties. By incorporating two sets of linear ways in parallel into the cast iron slide table and bed, which have undergone precision grinding, and combining them with precision ball screws, it achieves high travel accuracy and precise positioning. With two sets of linear ways optimally arranged on a high-rigidity bed, it has a large load capacity and a structure that is strong against moments and combined loads. 【Features】 ■ High-precision and high-rigidity positioning table ■ High travel accuracy and positioning precision ■ High rigidity with a large load capacity *For more details, please download the PDF or feel free to contact us.

• Other conveying machines

This catalog introduces the "NTN Parts Feeder." To clearly show the various combinations, which are a major feature of our product, we have included a combination chart for all products. Additionally, we have listed peripheral equipment that is convenient for creating diverse product combinations, as well as commonly used replacement parts, as much as possible. [Contents (excerpt)] ■ List of standard products ■ Bowl feeder ■ Bowl ■ Linear feeder ■ Hopper ■ Controller *For more details, please download the PDF or feel free to contact us.

• Parts feeder

This catalog introduces Teraru Taku Co., Ltd.'s "Coolant Pump." We offer a lineup of high-performance models, including the self-priming type (NPJ type) and immersion type (NQJ type) of the JEM series compliant with JEM-1242, as well as high flow rate series and high head series. This is a useful reference book, so please make sure to utilize it when selecting products. [Contents (excerpt)] ■ Model selection ■ Coolant pump model transition table ■ Standard stock models of coolant pumps ■ How to calculate loss head ■ Selection diagrams *For more details, please download the PDF or feel free to contact us.

• Other pumps

We would like to introduce the "Air Swing Clamp" that we handle. It features a robust swing mechanism with three steel balls and a Gothic arch-shaped lead groove. It achieves high speed and long life, contributing to the creation of environmentally friendly equipment with a long lifespan. Please feel free to contact us when you need assistance. 【Features】 ■ Usable in coolant environments ■ Compact body ■ High precision and long lifespan *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

We would like to introduce "Tsubaki Cableveyor Total Tracks," which we handle. We assemble processed cables and hoses into the Cableveyor and deliver them. This enables smooth attachment to machines and equipment after receipt. Please feel free to contact us when you need our services. 【Lineup (excerpt)】 ■ PVC control cables ■ PUR control cables ■ PUR BUS/Coax/LWL cables ■ PVC power cables ■ PUR power cables *For more details, please download the PDF or feel free to contact us.

• Other services

This catalog introduces the Mitsubishi "Pressure Ventilation Fans" that we handle. We offer a variety of product types, including pull cord type, standard type, grille type, and mesh type. We have included a list of the characteristics and specifications of each product, as well as system components, so please take a moment to read through it. [Featured Products] ■Commercial Pressure Ventilation Fans ■Industrial Pressure Ventilation Fans *For more details, please download the PDF or feel free to contact us.

• Ventilation and Exhaust

We would like to introduce the "Polylube Bearings" that we handle. Polylube Bearings come in two specifications: the Spot Pack specification, which has multiple points of lubrication sealed above the retainer, and the Full Pack specification, which is filled almost entirely with lubricant in the bearing's space. In the Spot Pack specification, Polylube is not agitated like grease, resulting in minimal agitation resistance and the potential for reduced bearing torque. 【Features】 ■ Minimal leakage of lubricant ■ Good lubrication properties ■ Bearing torque ■ Sealing effect ■ High safety *For more details, please download the PDF or feel free to contact us.

• Metal bearings

This catalog introduces the "proportional control valves" that we handle. It provides detailed information about the "JSP Series," which allows for stepless flow control with a single proportional solenoid valve. Common specifications, applicable fluids, flow characteristics, and more are included, so please take a moment to read through it. 【Contents (excerpt)】 ■ Model designation method ■ Common specifications ■ Flow characteristics ■ Flow characteristics / Hysteresis ■ Structural diagram *For more details, please download the PDF or feel free to contact us.

• Control Panel

We would like to introduce the air slide table 'MXQ32-X2600' that we handle. The table's displacement is reduced by 50%. Additionally, by adopting a linear guide with a four-row circular arc groove, we achieve high rigidity and high precision. Please feel free to contact us when you need assistance. 【Features】 ■ Maximum load capacity: 160N ■ Aluminum table: Increased load capacity due to lightweight movable parts ■ Operation port, stroke adjustment adjuster, and auto switch are consolidated on one side to improve operability *For more details, please download the PDF or feel free to contact us.

• Other conveying machines

The "ThermoCon/Compact Type Air-Cooled HEF Series" is a Peltier-type circulating liquid temperature control device that uses Peltier elements to precisely control the temperature of the circulating liquid. Since there are no moving parts like compressors, it produces less vibration and dust, and operates quietly. The fan speed is kept low during low load conditions to minimize noise. Customers concerned about noise during high load conditions can reduce it by setting the fan to a constant mode. 【Features】 ■ Quiet design (at low load): 37dB ■ Cooling capacity: 220W ■ Temperature stability: ±0.1℃ ■ Set temperature range: 10℃ to 60℃ ■ Excellent temperature tracking *For more details, please download the PDF or feel free to contact us.

• Temperature and Humidity Control

The "Model GBF" is a hydraulic clamp that accommodates variations in the thickness of the mold clamp section and achieves a combination of automatic sliding. It uses a three-circuit hydraulic unit, allowing for individual control of the hydraulic circuits for the upper mold, lower mold, and RA die lifter. The movement of the clamp is facilitated by an air valve unit, enabling sliding action. 【System Configuration Example】 ■ Upper Mold Clamp: GBF Clamp ■ Lower Mold Clamp: GBF Clamp ■ Hydraulic Source: CP□ Unit / CQ□ Unit ■ Air Valve Unit: MV30□ 3-Valve Unit *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

The "Model MV30" is an air direction control valve that operates through electric control. It is suitable for controlling the air cylinder that slides the automatic slide clamp along the T-slot. We offer two types of products: MV3013 and MV3023. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■ Type: Metal seal / 5-port pilot type ■ Position and solenoid count ・ When selecting N or T: 2-position double ・ When selecting S: 3-position exhaust center ■ Operating fluid: Dry air ■ Maximum operating pressure (MPa): 1.0 * For more details, please download the PDF or feel free to contact us.

• valve

The "BD800" is a bypass blow valve designed to remove scale, such as rust and debris flowing through the piping, that may get caught in the valve and valve seat, preventing it from fully closing. It has a structure that allows for the removal of scale through the operation of the valve, restoring sealing performance. Durable materials are used for the valve shaft and valve seat to prevent erosion and material loss. Additionally, even if the valve and valve seat wear out after years of use, they can be replaced, allowing for continued use. 【Features】 - Structure that easily removes scale and prevents jamming - Erosion prevention with durable materials - Replaceable key components - Adoption of a spanner cap instead of a handle - Prevention of rainwater and foreign matter intrusion from the outside, preventing the valve shaft from seizing *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce the "Clamp Lever" that we handle. We offer a variety of products, including the "LDCM-LW" with a rotation radius of 30mm, the "LECM-LW" suitable for tightening resin parts and long hole parts, and the "LHCMS-LW" suitable for applications with limited upper space. Please feel free to contact us when you need assistance. 【Product Lineup (Excerpt)】 ■LDCM-LW ■LDCMS-LW ■LDCMS-LW-AS ■LDCMS-LW-CR ■LDCMS-LW-NI ■LECM-LW *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "Cable Tray Supporter" is a product designed to prevent the bending and sagging of cable trays. We offer four types: "S type," "LA type," "LB type," and "Z type." You can place an order for a "semi-custom" version made to your desired width and length. Additionally, we can perform additional processing for fixing holes in the cable tray supporter and the cable tray itself. Please specify the desired number and dimensions of the holes. 【Product Lineup】 ■ S type ■ LA type ■ LB type ■ Z type *For more details, please download the PDF or feel free to contact us.

• Other conveying machines

We would like to introduce the "Idler" that we handle. We offer a wide variety of types, including the "A-type Sprocket Idler," "Flanged Idler with Shaft," "Stainless Flat Idler," and "Vankin V Idler." Additionally, we also provide holders (fixed type/manual adjustment type/automatic adjustment type), continuously variable transmissions, and motor bases. 【Peripheral Equipment Lineup (Partial)】 ■ Idler ■ Shaft ■ Holder (Fixed Type) ■ Holder (Manual Adjustment Type) ■ Holder (Automatic Adjustment Type) *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce our "magnet application conveying equipment." Our lineup includes "electromagnetic holders" such as thin types and automatic release types, "lifting magnets" including permanent magnets and cam types, and "electromagnetic rails and rollers" that support transportation and enhance work efficiency. Additionally, we also offer "conveying auxiliary tools" and "hand magnet tools," so please feel free to contact us if you have any requests. 【Product Lineup】 ■ Electromagnetic Holders ■ Lifting Magnets ■ Electromagnetic Rails and Rollers ■ Magnetic Conveyors ■ Conveying Auxiliary Tools ■ Hand Magnet Tools *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "Cam Follower and Roller Follower" is a bearing designed for outer ring rotation, featuring a structure that incorporates needle rollers into a thick outer ring, resulting in a low friction coefficient and excellent rotational performance. The outer peripheral surface where the needle rollers of the inner ring roll is finished to high precision, contributing to a long service life. By adopting crowned rollers, it is designed to be strong against misalignment. Additionally, it allows for tightening using a hexagonal rod wrench as a locking mechanism. 【Features】 ■ Extensive product lineup ■ A wide range of product specifications to choose from according to application ■ Easy installation with hexagonal holes ■ IKO original lubrication structure ■ Innovative C-lube unit for cam followers *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings