藤川伝導機 List of Products and Services

This catalog introduces the chain slings and universal lifting devices for molds from Zojirushi Chain Block Co., Ltd. It includes products such as component fittings, standard sets for single, double, and quadruple lifting. Information on working loads, dimensions, and chain sizes is provided. Please use this for selecting products. 【Featured Products (Excerpt)】 ■ Component fittings for Zojirushi chain slings (Eye Type) - C-10 Chain - MFF Master Link - MS Master Link - AT Large Capacity Master Link *For more details, please refer to the PDF document or feel free to contact us.

• Chains and sprockets
• crane
• Other work tools

The "Chain Equalizer" has been developed to allow for quick and easy balance suspension of steel structures and steel columns with simple operations. By adopting a powerful chain with excellent wear resistance and flexibility, it is compact and lightweight. Furthermore, by connecting the "Column Lock," the removal of the lifting sling can now be performed remotely. 【Features】 ■ Robust structure made of special steel ■ Safety factor of over 5 times ■ Easy maintenance and inspection ■ High safety insulated swivel ■ Column lock *For more details, please refer to the PDF document or feel free to contact us.

• crane
• Other conveying machines

The "Bar Setter" is a lifting device for steel plates that utilizes crane power to enable labor-saving operations by incorporating a bar function at its tip. By hooking it at the tip and lifting it slightly (150-200mm) with a crane, a gap is easily created to insert a timber. The connection part of the wire or chain swings 180°, preventing undue force on the lifting ring during lifting, flipping, or pulling down the load. 【Features】 ■ Tip bar function ■ Durable latch function ■ Multipurpose use ■ Easy-to-operate opening and closing lock function ■ Guaranteed load capacity of 2.5 times *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines
• crane

We would like to introduce the "Clamp," a lifting device for slinging from Zojirushi Chain Block Co., Ltd., which we handle. We have incorporated mechanisms throughout that can detect potential hazards in advance, such as wear on parts and overload conditions. Moreover, we have made it possible for operators to easily verify safety at a glance, regarding proper operability, overload conditions, and the perfection of gripping functions, which were previously reliant on the judgment of experienced personnel. 【Features】 ■ Wear level is visible ■ Overload is recorded ■ Insulation mechanism for welding current included *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

The "WF/WH type" is a screw clamp that securely grips tapered I-beams and similar shapes using a spherical double cam lock mechanism. Since the circular cams are supported on both sides by spherical surfaces, the cams rotate according to the direction of the suspended load, applying clamping force without slipping, allowing for safe operation. With two attachment points for vertical and horizontal lifting, it can accommodate loads in any direction. 【Features】 ■ Lightweight screw clamp ■ WF type allows work in all directions with two lifting holes ■ WH type is compact and lightweight with one lifting hole ■ Usable for sloped suspended loads like I-beams ■ Uses fine-thread screws ■ The body is coated with heat-resistant paint, and the circular cams and screws are treated for rust prevention *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

This catalog introduces the "Electric Blowers" from Yodogawa Electric Manufacturing Co., Ltd. We offer a lineup of models, including the Sirocco type electric blower and the plate type electric blower, categorized into two types: standard and heat-resistant. We have included the features of each product, as well as their main applications, specifications, and dimensional drawings. We encourage you to take a look. [Featured Products (Excerpt)] ■ CN series Sirocco type electric blower ■ N series Plate type electric blower ■ BN/DH/KDH series Turbo type electric blower ■ HB series Multi-stage electric blower *For more details, please refer to the PDF document or feel free to contact us.

• air conditioning
• Dust collector
• Drying Equipment

This catalog introduces the "General Dust Collector" from Yodogawa Electric Manufacturing Co., Ltd. It includes products such as the cartridge filter type dust collector "DET" and the pulse jet dust removal type dust collector "PET-P." The catalog details the features, structure, and specifications of each product, making it a useful reference for considering implementation. We encourage you to take a look. [Contents] ■ Small Cartridge Filter Type Dust Collector ■ Cartridge Filter Type Dust Collector ■ Pulse Jet Dust Removal Type Dust Collector ■ Customization Options ■ Piping Components ■ Technical Documentation *For more details, please refer to the PDF document or feel free to contact us.

• Dust collector

The "SET series" is a dust collector effective for reducing fume concentration around workers, specifically for welding fumes. Before entering the main body of the dust collector, a suction rectification box with a uniquely designed multi-stage baffle made of special metal porous material is installed. We offer two types: "stationary" and "portable." 【Features】 ■ Unique spark suction suppression function ■ Filter with a very large filtration area ■ Wide lineup with both stationary and portable types ■ Compact and space-saving, suitable for any installation location *For more details, please refer to the PDF document or feel free to contact us.

• Dust collector

"YES" is a revolutionary dust collection system that integrates a dust collector and a workspace. Since the dust collector is directly connected to the workspace, there is almost no "pressure loss," which acts as resistance, compared to conventional dust collectors that require piping and hood connections. We offer a lineup of four series, including the iron hood type "YES-VD" and the acrylic hood type "YES-PDP." [Features] ■ High dust collection capacity with a small motor ■ Equipped with a high-performance main filter ■ HEPA class filter installation ■ Easy maintenance without tools ■ Manual shaking (dust removal) function *For more details, please refer to the PDF document or feel free to contact us.

• Other powder equipment
• Dust collector

The "YMS" is a dust collection workbench that minimizes air blowing within machine tools, making it possible to suppress mist dispersion outside the machine. Operational controls and dust processing maintenance are centralized at the front of the unit. It comes with an oil pan and drain plug, allowing for the separate collection of liquids. We offer two types to choose from: the basic "YMS-J series" and the high-spec "YMS-V series." 【Features】 ■ Improvement of the environment around machine tools ■ Integrated work space and dust collector ■ Easy layout changes ■ Simple operation and maintenance ■ Equipped with high-performance filters *For more details, please refer to the PDF document or feel free to contact us.

• Dust collector
• Industrial Vacuum Cleaners

This catalog introduces various grinders from Yodogawa Electric Manufacturing Co., Ltd. We have a lineup of series products including the dust-collecting double-headed grinder "FG," the dust-collecting belt grinder "FS," and the dust-collecting buff grinder "FB." It contains descriptions of the features, specifications, and dimensional drawings of each product, making it a useful reference when considering implementation. We encourage you to read it. 【Featured Products (Excerpt)】 ■ FG/SY series double-headed grinders ・FG150S/T ・FG205S/T ・SY125S ・SY150S/T *For more details, please refer to the PDF materials or feel free to contact us.

• Dust collector
• Other processing machines

This catalog introduces the "Slide Shaft" products handled by our company. It includes information on the materials of products such as "HGS," "HGQ," and "HGP," as well as surface hardness, surface roughness, specifications, and lengths. Additionally, we also provide calculations for deflection amount and deflection angle under shaft usage conditions. Please make use of this information for product selection. 【Featured Products (Excerpt)】 ■ HGS Standard Slide Shaft ■ HGQ Standard Stainless Steel Slide Shaft ■ HGP Standard Pipe Slide Shaft ■ HGP Standard Small Diameter Pipe Slide Shaft *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Other machine elements

This catalog introduces the "Slide Shaft Machining Standard Products" handled by our company. It includes products such as "STP," "WTP," and "SDN." Specifications such as nominal diameter and standard dimensions are also provided. Please make use of this for selecting products. 【Featured Products (Excerpt)】 ■STP Single-Sided Tapped Machining Standard Products ■WTP Double-Sided Tapped Machining Standard Products ■SDN Single-Sided Step Machining Standard Products ■WDN Double-Sided Step Machining Standard Products *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Other machine elements

This catalog introduces the "30-degree trapezoidal screws" that we handle. It includes information on the materials of products such as "TMR," "TML," and "TMK," as well as details on single pitch error, cumulative pitch error, and standard lengths. Additionally, it explains the selection of screw shafts, the range of screw usage, friction coefficients, and tolerance accuracy. Please make use of this information for product selection. 【Featured Products (Excerpt)】 ■ TMR Standard Rolled 30-degree Trapezoidal Screw Shaft ■ TML Standard Cut 30-degree Trapezoidal Screw Shaft ■ TMK Standard High-Strength Material 30-degree Trapezoidal Screw Shaft ■ TMS Standard Stainless Steel 30-degree Trapezoidal Screw Shaft (Cut) ■ TMSR Standard Stainless Steel 30-degree Trapezoidal Screw Shaft (Rolled) *For more details, please refer to the PDF document or feel free to contact us.

• nut
• Other machine elements

This catalog introduces the "High Lead Screws" that we handle. It includes information on products such as the "Standard 30-Degree Trapezoidal High Lead Screw Shaft" and the "Standard Round Flange Nut," detailing their materials, dimensions, and weights. Additionally, we also present specifications for additional processing dimensions at the screw shaft end. We encourage you to read through it. 【Contents (Excerpt)】 ■ TMH4 Standard 30-Degree Trapezoidal High Lead Screw Shaft ■ TTMH4 Standard Round Flange Nut ■ TMH8 Standard 30-Degree Trapezoidal High Lead Screw Shaft ■ TTMH8 Standard Round Flange Nut ■ TMHSP Standard High Lead Screw Shaft *For more details, please refer to the PDF document or feel free to contact us.

• nut
• Other machine elements

The "TMH" is a small-diameter high-lead screw made of SUS303 material. The single pitch error is ±0.02mm. Available in 2-start, 4-start, and 8-start configurations. Additionally, we also offer the small-diameter high-lead screw nut "PATM" made of polyacetal resin. 【Features】 ■ Material: SUS303 ■ Single pitch error: ±0.02(mm) ■ Cumulative pitch error: ±0.20/300(mm) *For more details, please refer to the PDF document or feel free to contact us.

• nut
• Other machine elements

We would like to introduce our small-diameter feed screw shaft 'MST'. The material used is S45C (carbon steel for machine structures). We offer five different model numbers. Additionally, we also have a small-diameter feed screw nut 'MSN' made of BC6 (bronze casting) in our lineup. 【Specifications (partial)】 ■ Model number: MST05008 ■ Nominal outer diameter (mm): 5 ■ Pitch: 0.8 ■ Lead (mm): 0.8 ■ Number of starts: 1 ■ Standard length L (mm): 400 *For more details, please refer to the PDF document or feel free to contact us.

• nut
• Other machine elements

We would like to introduce our small-diameter spherical feed screw nut 'MSN'. The material is polyacetal resin (POM). We offer six different model numbers. Additionally, we also have the backlash-free type "SRS" and the small-diameter spherical feed screw shaft "MRS" available in the same nut. 【Features】 ■ Material: Polyacetal resin (POM) ■ Thrust clearance: 0.15 mm or less *For more details, please refer to the PDF document or feel free to contact us.

• nut
• Other machine elements

We would like to introduce our precision grinding feed screw shaft 'TMG'. We also offer surface treatment, and upon request, high-frequency hardening and carburizing are possible. This product primarily focuses on individual responses to customer needs, and the specifications will be set through consultation. 【Materials】 ■ Male thread: SK, SUJ, SC, SCM, SNCM, SUS, and others ■ Female thread: BC, ALBC, PBC, other copper alloys, resin, and others *For more details, please refer to the PDF document or feel free to contact us.

• nut
• Other machine elements

This catalog introduces the belt slings and belt ratchet straps handled by our company. In addition to the "Z type," it includes "R type" and "P type" belt slings, as well as "SS type" round slings and "M type" for chemical resistance. The easy-to-use, efficient, and convenient belt ratchet straps are available in two types: ratchet and cam. Please make use of this information when selecting products. 【Featured Products (Excerpt)】 ■ General Lifting - Belt Sling JIS IV Grade Z Type - Belt Sling JIS IV Grade R Type - Belt Sling JIS III Grade P Type - Round Sling JIS Mark Display SS Type - Round Sling for Heavy Loads SS Type *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines
• Other safety and hygiene products
• Other work tools

In this document, we provide a general description of the "Universal Joint" handled by our company, as well as guidance on selection and a variety of products. We feature a rich lineup, including the "TL type" for light and medium loads, and the "TLF type," which is a wide-angle flange outer diameter selection type. The content is designed to be easy to reference when selecting products. We encourage you to read it. 【Contents (Excerpt)】 ■ General description and selection of universal joints ■ Selection of universal joints ■ TL type for light and medium loads ■ TLF type wide-angle flange outer diameter selection type ■ TKL type for heavy and extra-heavy loads ■ TKLF type wide-angle flange outer diameter selection type *For more details, please refer to the PDF document or feel free to contact us.

• joint

We would like to introduce our constant velocity ball joints, the 'R and RS types (disk type).' The standard model sizes range from 75 to 200, while the claw type models range from 225 to 400. Additionally, we also offer the disk flange type "RF and RFS types" and "mounting flange." 【Boot Shapes】 ■H Model ■J Model ■MS Model ■MW Model *For more details, please refer to the PDF document or feel free to contact us.

• joint

In this catalog, we introduce the magnetic materials and parts of Techno Plan Co., Ltd., as well as magnetic countermeasures and magnetic component inspection equipment. In addition to "neodymium magnets" and "ferrite magnets," we feature a variety of products such as "simple holders" and "magnetic component inspection equipment." We also provide information on "magnet application conveying equipment," "magnet application sorting equipment," and "magnet application working equipment," making it easy to reference for product selection. [Featured Products (Excerpt)] ■ Neodymium magnets ■ Ferrite magnets ■ Samarium cobalt magnets ■ Alnico magnets ■ Magnetic sheets *For more details, please refer to the PDF document or feel free to contact us.

• magnet
• Rubber
• Power tools

This catalog introduces the "casters" handled by Tokai Caster Co., Ltd. It features a rich lineup including the ultra-heavy-duty double wheel caster "TSY series," as well as non-magnetic casters compatible with 3 Tesla, such as the "MB series" and "TMB series." Specifications such as wheel diameter, allowable load, and dimensions are also provided for each product. We encourage you to take a look. [Contents (excerpt)] ■ Ultra-heavy-duty double wheel caster TSY series ■ Non-magnetic caster compatible with 3 Tesla ・MB series ・TMB series ■ Still (silent) caster FZ series *For more details, please refer to the PDF document or feel free to contact us.

• caster

This catalog introduces the product lineup of Tokyo Transmission Co., Ltd. It features a wide range of products including the "AV type" power unit, zero ace unit differential gearboxes, gear reducers, and remote control systems. Specifications and other details are provided using diagrams and tables, so please make use of this information when selecting products. [Contents (excerpt)] ■ Tohhen Power Unit with Safety Cover ■ Tohhen Power Unit Open Type ■ Tohhen Zero Ace Unit Differential Gearbox ■ Gearbox and Worm Reducer ■ Gear Reducer ■ Remote Control *For more details, please refer to the PDF document or feel free to contact us.

• Power Transmission Equipment
• Transmission
• Gearbox

This catalog introduces the "Universal Joint" from Sanyu Tech Co., Ltd. It features a wide range of products, including the compact type "K type," the standard type "L type," and the stainless steel type "SU type." Additionally, it explains the selection table for universal joint types and lubrication criteria. Please make use of this information for product selection. [Contents (excerpt)] ■ List of Universal Joints ■ Inner Diameter Processing Shape Table ■ Design and Installation Precautions ■ Method for Selecting Universal Joints ■ Confirmation Items for Universal Joint Specifications *For more details, please refer to the PDF document or feel free to contact us.

• joint

This catalog introduces the "Flexible Shaft" handled by Sunflex Corporation. It explains the features and composition of the flexible shaft, as well as the inner shaft and outer tube. We have included the main applications and specifications of the "F Series" for transmitting power over long distances, from small to large, and the "FC Series" for remote control, along with the necessary elements for selection. We encourage you to read it. [Contents (excerpt)] ■ What is a Flexible Shaft ■ Composition of the Flexible Shaft ■ Powered Drive Flexible Shaft F Series ■ Powered Drive Flexible Shaft F Series with Outer Tube *For more details, please refer to the PDF document or feel free to contact us.

• Power Transmission Equipment

This catalog introduces the "Elastic Ceramic Grinding Wheels" handled by Sunflex Corporation. It includes features, types, and applications of "Ceramic Wheels," which enable the rationalization of polishing work, and "Ceramic Blocks," which are suitable for polishing corners and edges. Additionally, we present sets that have been selected from a wide range of items based on the high demand for certain products at various sites, making it easier to reference when selecting products. [Contents (Excerpt)] ■ What are Elastic Ceramic Grinding Wheels ■ Ceramic Wheels ■ Ceramic Disc ■ Ceramic Disc Soft ■ Ceramic Points *For more details, please refer to the PDF document or feel free to contact us.

• Grindstone

This catalog introduces the "Slip Ring System" from Ohsaki Electric Co., Ltd. It includes product features, applications, standard structures, standard outline drawings, and dimension tables. Additionally, it offers a wealth of information on standard outline drawings and dimension tables for items such as "Brush Holders Standard Type/Special Type." Please make use of this information for product selection. [Contents] ■ Slip Ring System Standard Type ■ Brush Holder Standard Type/Special Type ■ Support Rods and Brushes Standard Type/Special Type ■ Slip Ring System 2-Pole, 4-Pole, 6-Pole Molded Standard Type ■ Slip Ring System Special Type ■ When inquiring about slip rings, please provide the following information. *For more details, please refer to the PDF materials or feel free to contact us.

• Slip Ring

The "Cam Diverter" is a right-angle diverting device used in the 90° turning section of a pallet-based conveyor line. By adopting a structure that supports the upper frame with a cam mechanism at four points on the shaft tip, it meets the requirements for reliably diverting heavy items. With the use of the cam mechanism, the operation allows for a slow start and stop, while moving quickly in the intermediate section, enabling smooth elevation and descent of the conveyed items. 【Features】 ■ Reliable diversion of pallets (conveyed items) ■ High-frequency compatibility ■ Smooth elevation and descent of conveyed items *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor
• Other conveying machines

The "Clean Series Z Model" is an electric scissor lift designed for use in clean rooms. Based on the electric scissor lift Endeavor Series (250, 500, 1000 kg types), it features various dust prevention measures. We offer a standard lineup of 15 models. [Options] - Four-sided bellows - Anchor brackets - Terminal box *For more details, please refer to the PDF materials or feel free to contact us.

• Other clean room equipment and facilities
• lift

The "Environmentally Resistant Small Conveyor Chain LSK Specification" is a product that achieves long life through the use of specially processed bushings that are resistant to wear. It demonstrates high performance in a wide range of environments, from high-temperature atmospheres to dry environments, environments exposed to water, and even underwater. We use carefully selected special engineering plastics. Please feel free to contact us when you need assistance. 【Features】 ■ Resistant to wear ■ Resistant to heat ■ Resistant to chemicals *For more details, please refer to the PDF document or feel free to contact us.

• Chains and sprockets

"Cast Nylon CDM Grade" is a resin material that has been endowed with antistatic properties, based on general cast nylon resin. Thanks to our unique formulation, we have achieved an improvement in heat resistance. It possesses antistatic performance with a volume resistivity of 10^4 to 10^8 Ω·m. Please contact us if you require this product. 【Properties】 ■ Specific gravity: 1.18 to 1.20 ■ Tensile strength (MPa): 70 to 80 ■ Elongation (%): 20 to 30 ■ Izod impact strength (J/m): 50 to 60 ■ Hardness: R115 to 120 ■ Volume resistivity (Ω·m): 10^4 to 10^8 *For more details, please refer to the PDF document or feel free to contact us.

• Plastic utensils and containers
• Composite Materials

"UHMW-SA (High Sliding and Anti-Static Grade)" is a super high molecular weight polyethylene resin material that safely and softly contacts and slides against counterpart materials, achieving a long lifespan for components. It can be used in applications such as screw guides for bottling lines and food manufacturing lines, as well as roller components for electronic component manufacturing lines. It has anti-static properties with a volume resistivity of 10^8 to 10^10 Ω·m. 【Characteristics (Excerpt)】 ■ Specific Gravity: 0.97 ■ Volume Resistivity (Ω·m): 10^8 to 10^10 ■ Dynamic Friction Coefficient - Against S45C: 0.16 - Against PET: 0.21 *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

The "STAR WIPER" is a machine tool wiper made from NBR rubber, which has excellent oil resistance and abrasion resistance, ensuring outstanding durability. It is installed in sliding parts of machine tools and is used for scraping chips and oil, contributing to the maintenance of machining accuracy in machine tools that require high-precision processing. The surface of the steel plate is treated for rust prevention in compliance with the RoHS directive. 【Features】 ■ Additional processing such as drilling and cutting is possible ■ Slide-type seals can be custom molded to fit the shape of the sliding bed ■ We can also accommodate requests to prevent lip peeling of slide-type seals *For more details, please refer to the PDF materials or feel free to contact us.

• Wipers

"Kurimpy" is an antibacterial polyethylene (PE) material based on the antibacterial standard JIS Z 2801, which has passed the Food Sanitation Act. As a result of antibacterial performance tests conducted on this product and general PE without antibacterial treatment, it was confirmed that the growth of bacteria, including Staphylococcus aureus and Escherichia coli, is suppressed. It meets the JIS standard for both weather resistance and water resistance with an antibacterial activity value of ≧2. 【Size】 ■ Sheet/Thickness (mm): 10–50 ■ Round rod/Diameter (mm): 20–100 *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Climpy UH" is a super high molecular weight polyethylene material that has passed antibacterial performance tests, mold resistance tests, and the Food Sanitation Act. As a result of conducting antibacterial performance tests on this product and super high molecular weight polyethylene without antibacterial treatment, it was confirmed that the growth of Staphylococcus aureus and Escherichia coli is suppressed. It meets the antibacterial activity value of ≧2.0 according to JIS standards in weather resistance category 1 and water resistance category 3. [Features] ■ Low friction ■ Wear resistance ■ Chemical resistance *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

"Climpy PPF" is a polypropylene resin material that meets antibacterial testing, mold resistance testing, and the Food Sanitation Act. We conducted antibacterial performance tests (JIS Z2801) on this product and untreated polypropylene (PP), confirming that the growth of bacteria, including Staphylococcus aureus and Escherichia coli, is inhibited. We also offer a standard grade "mep-PPF" that complies with the Food Sanitation Act. [Features] ■ High rigidity ■ Chemical resistance ■ Antibacterial and mold-resistant *For more details, please refer to the PDF materials or feel free to contact us.

• Composite Materials

"Bestarl G" is an engineering plastic that excels in sliding properties and wear resistance, achieved by dispersing a unique lubricant in a polyacetal copolymer. It can be used in various applications such as rotating parts and contact sliding parts in OA equipment and general industrial machinery. It is expected to be suitable for high-load applications and to extend the lifespan of sliding components. 【Characteristics (excerpt)】 ■ Specific gravity: 1.38 ■ Tensile strength (MPa): 54 ■ Elongation (%): 50 ■ Compressive strength (MPa at 5% deformation): 74 ■ Flexural strength (MPa): 72 ■ Izod impact strength (J/m): 90 *For more details, please refer to the PDF document or feel free to contact us.

• plastic

"MEP-PEEK" is a super engineering plastic that combines excellent mechanical properties and dimensional stability. It can be used in various fields such as semiconductor and liquid crystal manufacturing equipment. It has flame retardancy and radiation resistance. Please feel free to contact us when you need assistance. 【Features】 ■ High strength ■ Chemical resistance ■ Heat resistance *For more details, please refer to the PDF document or feel free to contact us.

• plastic

"FREEPA" is an inspection window that can be opened and closed solely by lever operation, improving work efficiency. The connection between the lever and hinge uses a dedicated snap pin, allowing for removal and installation without tools. Additionally, the welding surface is left unpainted during installation, eliminating the hassle of removing paint. 【Features】 ■ Easy inspection work ■ Easy cover replacement ■ Increased cover strength ■ Easy welding work ■ Lever reinforcement is safely achieved through press forming *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

This catalog introduces handling robots from the industrial robot manufacturer, Fujikoshi. We offer a lineup including the "MZ Series," which is high-speed, high-precision, dustproof, and waterproof with flexible installation conditions, and the "EC Series," which is suitable for applications such as assembly and handling. It includes specifications and features, making it a useful reference when considering implementation. 【Contents (excerpt)】 ■ Lineup ■ Handling ■ Palletizing ■ Welding ■ Clean Room ■ Options, packaged products, controllers *For more details, please refer to the PDF document or feel free to contact us.

• Transport and handling robots

The "640S" is a high-durability caster that has dramatically improved turning durability by adopting thrust bearings. The reduction in turning start-up force has decreased driving energy consumption. This aims to streamline transportation and improve the operational efficiency of unmanned transport vehicles such as AGVs and AMRs. Please feel free to contact us when needed. 【Features】 ■ Turning durability improved by more than 10 times ■ Turning start-up force reduced by 50% *For more details, please refer to the PDF document or feel free to contact us.

• caster

"LWLF2" is a super compact linear guide device created using unique small sizing technology. The track rail is designed with a tapped rail specification, ensuring secure fixation. Due to its structure, which arranges steel balls in two rows that contact the track at four points, it achieves not only an extremely small size but also stable precision and rigidity even in applications where loads with varying directions and magnitudes, as well as combined loads, are applied. 【Features】 ■ Easy assembly ■ Ultra-compact sizing ■ Made of stainless steel with excellent corrosion resistance *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "SA200DE" is an alignment stage that has been newly added with the standard setting of SA200DE/X, which is an X-table for linear positioning. By combining it with the SA200DE/S, which is for rotational positioning, it is possible to easily construct an extremely compact alignment stage that can move in three directions: XYθ axes. Compared to stages driven by ball screws, it achieves an extremely low profile height. 【Features】 ■ Free combination of XYθ axes ■ Thin and compact ■ Energy-efficient with high tact *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements