藤川伝導機 Product Lineup

I would like to introduce "resin powder processing." By immersing raw materials in liquid nitrogen at -196°C to embrittle them, we perform a technique called "cryogenic grinding," which allows for the grinding of rubber and resin materials that are difficult to grind at room temperature. We also conduct "room temperature grinding," where grinding heat is not accumulated and continuous grinding is possible without using refrigerants. Additionally, we also perform material modification processing, so please feel free to contact us when needed. 【Features】 <Cryogenic Grinding> ■ Capable of grinding elastic materials such as plastics and rubber that are difficult to grind ■ Reduces the generation of grinding heat, allowing for the grinding of materials with low melting points ■ Capable of achieving sharp particle size ranges ■ By circulating nitrogen gas, it is possible to reduce the amount of refrigerant used *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

This catalog features "Powder Trouble Prevention Equipment." The "Air Knocker" includes five series: the standard type SK series with a magnetic design, the variable type SV series with a valve system that allows for significant adjustments in impact force through air pressure regulation, and the standard type SKL series made with engineering plastic for the body. We also introduce many products such as the Jet Blaster, the metal detector Metalider, and the dust monitor permanent magnet type grid iron removal device. [Featured Content (Partial)] ■ Air Knocker Standard Type SK Series ■ Air Knocker Variable Type SV Series ■ Engineering Plastic Knocker Standard Type SKL Series ■ Air Knocker Long Piston Type SK Series ■ Air Knocker Stainless Type SK Series *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Flash Jet Dryer" is a highly efficient airflow dryer that utilizes high-temperature jet streams. Due to the high-pressure hot air, the dried products are dispersed to a single particle state. Additionally, since the drying occurs instantaneously, it is possible to keep the product temperature low, allowing for the drying of heat-sensitive materials and low-melting-point substances. There are no restrictions on the state of the raw materials, such as slurry, cake, or powder, and they are continuously recovered as fine powder. 【Features】 ■ Extremely high drying efficiency ■ Dried products are dispersed to a single particle state ■ Extremely short drying time (approximately 0.7 seconds) ■ Ability to maintain a low product temperature ■ Capable of drying heat-sensitive materials and low-melting-point substances *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

We would like to introduce the "mixers" that we handle. We offer a lineup that includes the "Vertical Mixer with Self-Rotation and Revolution Type (PX Type)" which has a screw that rotates and revolves inside the mixing container, and the "Vertical Batch Mixer (PB Type)" which consists of a conical container and spiral rotating wings. Additionally, we have the "V-Type Mixer (SVM Type)" and the "W-Type Mixer (SCM Type)" which, while having a lower mixing speed compared to the V-Type Mixer, achieves a better final mixing state. 【Features】 ＜Vertical Mixer Self-Rotation and Revolution Type (PX Type)＞ ■ High-precision mixing can be performed quickly ■ Applicable as a reactor for heating, cooling, and reactions ＜V-Type Mixer (SVM Type)＞ ■ Suitable for flowable powders and granules ■ Mixing can be done in a short time *For more details, please refer to the PDF materials or feel free to contact us.

• Mixer/agitator

We would like to introduce our "shim spacers." With a wide variety of thicknesses starting from 0.005mm, they are suitable for various gap adjustments. They are convenient for aligning motor bases and pillows, as well as for bearing adjustments during machine assembly. We offer a rich selection of shim rings and base shims. Please feel free to consult us when you need assistance. 【Product Lineup】 ■ Shim Rings ■ Base Shims ■ Shim Plates / Shim Boxes ■ Laminated Type *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce the "Antibacterial Caster KF Series" that we handle. The main body is made entirely of nylon, and there are two wheel diameters: 75mm and 100mm. We offer both plate and screw types. Additionally, the allowable load is 784(80)N(kg). Please feel free to consult us when you need assistance. 【Lineup】 ■KF075/075S ■KF075N/075NS ■KFW075/KFW075S ■KFW075N/KFW075NS ■KF075WS/KFW075WS *For more details, please refer to the PDF materials or feel free to contact us.

• caster

This document is a table of the main dimensions of the chilled wheels (outer surface hardened wheels) held by our company. The diameters for each product are summarized in the table as A to I. Additionally, the maximum load per month and the material for each are also included. For more details, please feel free to contact us. 【Listed Items (Partial)】 ■75 ■75A ■75 Special A ■100 ■100A ■100 Special A *For more details, please refer to the PDF document or feel free to contact us.

• wheel

The "Hypoid Motor TA, TR Series" is a space-saving product that supports multiple applications with three-phase hypoid gear and orthogonal axis reduction gear ranging from 0.1kW to 5.5kW. It is compatible with top runner motors from 0.75kW to 5.5kW, achieving premium efficiency in the IE3 class. Additionally, it has less slip compared to worm gears, resulting in high efficiency. For the same output, it consumes less power, making it an economical drive. 【Features】 ■ High efficiency ■ Low noise ■ Ease of use ■ Equipped with inverter motor ■ Compact *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

The "cross roller bearing" is a compact bearing structure in which rollers are arranged orthogonally between the inner and outer rings. Due to the line contact of the rolling surfaces, the elastic displacement caused by bearing load is minimal, and it can simultaneously accommodate complex loads such as radial loads, axial loads, and moments. Additionally, it is widely used in the swiveling parts of industrial robots, machine tools, and medical devices that require compactness, high rigidity, and rotational precision. 【Features】 ■ The rolling surfaces have line contact, resulting in minimal elastic displacement due to bearing load. ■ Capable of simultaneously accommodating complex loads such as radial loads, axial loads, and moments. ■ Widely used in the swiveling parts of industrial robots, machine tools, and medical devices. *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

We would like to introduce our "Control, Switching, and Disconnect Series" that we handle. The Control Series includes the "Chemifit C1 Speed Controller," which is suitable for environments requiring chemical resistance, and the "Compact Speed Controller," which is more compact compared to conventional sizes and features a push-one connection. Additionally, we offer the "Ball Valve" that allows for compact piping in the Switching Series, and the "Valve Embedded Connector," which opens and closes the valve inside the fitting by disconnecting and connecting the tube in the Disconnect Series. Please feel free to consult us when you need assistance. 【Product Lineup (Partial)】 ■ Control Series - Chemifit C1 Speed Controller - Compact Speed Controller - Speed Controller - Throttle Valve - Miniature Valve *For more details, please refer to the PDF document or feel free to contact us.

• valve

This catalog introduces the rack products we handle. It includes "network racks" that significantly reduce total installation time and have a heat dissipation performance of 8000W, as well as "server racks" with clear designs and "suburban data center racks (for earthquake-resistant data centers)" that have a robust structure capable of withstanding 1.25 times the shaking of the Hyogo Southern Earthquake Wave (1000 gal). There are also examples of seismic testing, making it a useful reference when considering implementation. Please make use of it for product selection. [Contents (partial)] ■ Network Rack ITN ■ Open Rack ITO ■ Assembly Rack ITA ■ Server Rack ITS ■ Cool Rack SCRVT *For more details, please refer to the PDF materials or feel free to contact us.

• rack
• Racks and Cases
• Server Rack

The "Quick Chuck Changer" is a product that allows for one-touch exchange of chuck plates, enabling a reduction in setup time. It is specialized for pick-and-place robots and supports a payload of 5 kg. It features a positioning function with a position repeatability of 0.05 mm. Additionally, depending on the shape of the chuck plate, even if the release arm is difficult to reach, it can be easily customized by attaching an accessory to the service tap for better usability. 【Features】 ■ Supports a payload of 5 kg ■ Includes a positioning function ■ Position repeatability of 0.05 mm ■ No need for fine adjustment of the mounting position for chuck plates or gate-cutting nippers ■ No need for teaching correction for pick-and-place robots ■ Significant reduction in setup time *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots

This case study collection introduces the implementation examples of the "composite chain" provided by our company. We present solutions to challenges such as reducing the effort and time required for attachment installation and facilitating the smooth replacement of overseas special chains. Additionally, we have included proposal examples for various applications. We encourage you to read through it. 【Contents (partial)】 ■ Want to reduce the effort and time required for attachment installation ■ Want to facilitate the smooth replacement of overseas special chains ■ Dissatisfied with the durability of chains; looking for longer-lasting options ■ Want to challenge cost reduction and installation time reduction for special blocks ■ Want to introduce chains suitable for product production and transportation *For more details, please refer to the PDF document or feel free to contact us.

• Chains and sprockets

The "Smart e-Flo System" is a system that connects ventilation equipment and other devices through the IoT platform "Linova" in the cloud. It integrates environmental information and ventilation fans via IoT, allowing for automatic operation of ventilation in non-residential facilities. By utilizing existing ventilation fans and adding a switch change and environmental sensors, ventilation is automatically controlled. Additionally, you can check indoor and outdoor environments using your smartphone or tablet, which also helps promote the air quality of your store. 【Benefits of IoT Integration】 ■ Automatic control of ventilation equipment ■ Balancing comfort and energy efficiency ■ Visualization of air quality ■ Remote operation and scheduled operation *For more details, please refer to the PDF document or feel free to contact us.

• Integrated operation management

This catalog introduces the track rollers we handle, "Cam Followers" and "Roller Followers." It includes explanations of the structure and features of each product, as well as dimension tables for metric and inch series. We have also included a wealth of drawings and images, so please use this as a reference for selecting products. [Contents (partial)] ■ Explanation of Cam Followers ■ Metric Series Dimension Table ■ Inch Series Dimension Table ■ Cam Followers for Pallet Changers *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

The "PSH Series" is a three-screen condensation checker (digital temperature and humidity switch) that visualizes relative humidity and displays it in real-time. With switch output, it allows for remote monitoring to prevent condensation issues before they occur, protecting important equipment from moisture. Additionally, it achieves stable accuracy even in water-resistant and high-humidity piping. Please feel free to consult us when you need assistance. 【Features】 ■ Prevents condensation issues before they occur ■ Enables selection and placement of dryers, as well as understanding replacement timing ■ Easy to install in a compact space *For more details, please refer to the PDF document or feel free to contact us.

• Thermo-hygrometer
• Temperature and humidity measuring instruments

We would like to introduce the "Modular Type F.R.L. Combination" that we handle. It features a two-layer structure with a transparent case guard that covers the entire circumference of the case. It allows for 360° visual confirmation, protecting the case from external environments and enhancing safety. Additionally, the light angle rectangular pressure gauge enables pressure confirmation from the handle side. Please feel free to consult us when you need assistance. 【Features】 ■ Improved visibility and environmental resistance ■ Adoption of transparent case guard ■ No tools required ■ Selectable pressure gauge ■ Easy-to-use handle shape *For more details, please refer to the PDF document or feel free to contact us.

• Pressure

The "LEKFS Series" is an electric actuator with a slider type that has improved moment resistance by up to 61%. Equipped with a battery-less absolute encoder, it allows for restart from the stop position when power is restored. There is no need for battery management or replacement, reducing maintenance efforts. Additionally, it can be equipped with auto switches, enabling position detection of the table throughout the entire stroke. Please feel free to consult us when needed. 【Features】 ■ Moment resistance improved by up to 61% ■ Maximum reduction of table displacement by 50% ■ Equipped with a battery-less absolute encoder ■ Repetition positioning accuracy: ±0.01mm ■ Improved moment resistance *For more details, please refer to the PDF document or feel free to contact us.

• Actuator

The "LEFS□G Series" is a power actuator with a high-tactile slider type. It supports a battery-less absolute encoder, which is mounted on the motor and continuously retains position information regardless of the ON/OFF state of the control power supply. There is no need for origin return when power is restored. Additionally, the absence of a battery reduces maintenance workload. There is no need for a battery to retain position information, eliminating the need for managing spare batteries, recycling, or replacement work. 【Features】 ■ Easy resumption of operation when power is restored ■ Reduced maintenance workload due to the absence of a battery *For more details, please refer to the PDF document or feel free to contact us.

• Actuator

The "MELFA CH Series" is a compact industrial robot with a space-saving arm design. It features a lightweight robot body and can construct additional axis control, achieving high productivity with high-speed operation and performance, capable of controlling up to 8 axes excluding the robot itself. There are application examples such as pick and place, labeling, and tracking. Please feel free to consult us when needed. 【Features】 ■ Compact arm that achieves space-saving ■ Lightweight robot body ■ High-speed operation and performance that realize high productivity *For more details, please refer to the PDF materials or feel free to contact us.

• Other industrial robots

The "1-Port 2-Sensing Lift Cylinder" is a product that can detect push and pull actions with a single port. It is suitable for automated equipment with a new structural sensing mechanism. The stroke can be specified in increments of 5mm. Additionally, it achieves high sealing performance even with high-pressure coolants thanks to a specially designed dust seal, and it uses sealing materials that excel in chemical resistance, providing high durability even with chlorine-based coolants. 【Features】 ■ Excellent coolant resistance ■ Directly mountable speed control valve ■ Reduction in the number of sensors ■ Four types of tip shapes to choose from ■ Reduction in the number of ports and easy processing *For more details, please refer to the PDF document or feel free to contact us.

• Hydraulic Equipment

We would like to introduce the "Free Ball Bucket Steam Trap" that we handle. This product ensures a reliable seal at all times through a three-point support system consisting of a drain jet (valve seat) and two cover guides located on the lid. Additionally, during cold conditions, the bimetal pushes the free ball bucket, forcibly opening the valve and rapidly eliminating initial air, which can shorten the startup time. 【Features】 ■ Reliable sealing ■ Time reduction ■ Excellent durability ■ Clogging prevention *For more details, please refer to the PDF document or feel free to contact us.

• Heat exchanger

This catalog introduces the "Grub Screws / Clamping Screws" that we handle. It includes the "SGB-SBP" grub screw with thrust pad, as well as the "SGP-PL/SGP-BR" which can be used for applications such as tightening workpieces, positioning, and as a stopper. We have provided clear explanations using images and diagrams, so please use this as a reference for product selection. [Contents (partial)] ■SGB-SBP ■SGBS-SBP/SGBS-SBPS ■SGP-PL/SGP-BR ■SGPS-PL/SGPS-BR ■SGTS *For more details, please refer to the PDF document or feel free to contact us.

• bolt
• nut

The "Aluminum Series" achieves weight reduction by incorporating stainless steel insert bearings into aluminum alloy bearing housings, providing mutual alignment and correcting shaft misalignment through the insert bearing unit. The unit that combines stainless steel and aluminum is particularly excellent in corrosion resistance, creating a hygienic and elegant machine device. Additionally, the unit with a stainless steel cover encloses the rotating parts of the shaft and bearing, enhancing safety and dust resistance. 【Features】 ■ Excellent corrosion resistance ■ Weight reduction ■ Compatibility with JIS shapes *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

We would like to introduce the "washers" that we handle. They can be used for bolt tightening and as spacers. Applications include washers for long holes and securing spring seats. Additionally, there are three types of materials/surface treatments: "Iron (S45C) / Black oxide," "Iron (S45C) / Electroless nickel plating," and "Stainless steel (SUS304)." 【Product lineup (partial)】 ■WC0803-2 ■WM0803-2 ■WS0803-2 ■WC0803-3 ■WM0803-3 ■WS0803-3 *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce the caster 'e' series that we handle. These are disassemblable products that consider the global environment. We offer two types: "plate-type component recycling" and "screw-type component recycling." Additionally, each type is available with or without a stopper. Please feel free to contact us when you need assistance. 【Lineup (partial)】 ■e50N3L-19 ■e50N3SL-19 ■e50N8L-14 ■e50N8SL-14 ■e50N10L-14 ■e50N10SL-14 *For more details, please refer to the PDF materials or feel free to contact us.

• caster

We would like to introduce our "Ball Bearing Outer Metal Chilled Wheels" that we handle. The outer diameter (wheel diameter) part is treated with chilled (cold hardening Shore hardness of 60° or higher), and some wheels use ductile chilled wheels. Additionally, we also have "Ball Bearing Outer Metal Wheels" that do not have chilled treatment on the outer diameter. 【Product Lineup (Partial)】 <Ball Bearing Outer Metal Wheels> ■BB-01 ■BB-02 ■BB-03 ■BB-04 ■BB-1 ■BB-2 *For more details, please refer to the PDF document or feel free to contact us.

• wheel

We would like to introduce the "Cloze Motor" that we handle. The Cloze Motor, which uses a worm gear, features orthogonal axes and a high reduction ratio, achieving space-saving in equipment layout. The CSMA and CSMR series achieve a reduction ratio of up to 1/60 with a single-stage worm gear, while the HCMA and HCMR series combine a first-stage helical gear with a second-stage worm gear to achieve a maximum reduction ratio of 1/300 in an orthogonal axis type. 【Features】 ■ Orthogonal axes and high reduction ratio ■ Compact ■ Quiet operation ■ Excellent stopping position accuracy ■ High efficiency ■ Excellent shock resistance *For more details, please refer to the PDF document or feel free to contact us.

• Other motors

We would like to introduce the "spherical sliding bearings" that we handle. The "oil-lubricated spherical sliding bearings" operate with low torque and have excellent wear resistance, with a large load capacity. The "maintenance-free spherical sliding bearings" have minimal creep deformation under compressive loads and are also excellent in wear resistance. Please feel free to contact us when you need assistance. 【Features】 <Oil-lubricated spherical sliding bearings> ■ Operate with low torque ■ Excellent wear resistance ■ Large load capacity ■ Suitable for alternating loads and impact loads *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

We would like to introduce the "tube cutters, tools, and accessories" that we handle. Starting with the compact and lightweight tube cutter "TC04," which is convenient for portability, we also offer hose cutters and a dedicated outer layer cover peeling cutter for FW tubes. In terms of tools and accessories, we have spatter caps and tube removal jigs (off-tools) available. 【Features】 <Tube Cutter TC04> ■ Compact and convenient for portability ■ Lightweight ■ Only the blade part can be replaced ■ Set of 3 replacement blades ■ Capable of cutting tubes up to 16mm *For more details, please refer to the PDF materials or feel free to contact us.

• cutter

We would like to introduce the "optical-related equipment" that we handle. In the "splice unit," we offer a lineup including fixed types and flexible slide types. Additionally, we have "optical distribution frames," "splice boxes," and "mini closures" available. Please feel free to contact us when you need assistance. 【Partial Lineup】 <Splice Unit> ■ Splice Unit (Fixed Type) ■ Splice Unit (Flexible Slide Type) ■ Splice Unit (No Front Cover, Fixed Type) ■ Splice Unit (No Front Cover, Flexible Slide Type) ■ Splice Unit High-Density 100-Core Type *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts
• Wiring materials

We would like to introduce our manual robot hand changer, the 'SXR', which we handle. It allows for one-touch manual exchange and is suitable for collaborative robots. We offer models such as 'SXR0010', 'SXR0030', and 'SXR0070'. Please feel free to contact us if you have any inquiries. 【Features】 ■ One-touch manual exchange is possible ■ Suitable for collaborative robots *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots

We would like to introduce the "composite chain" that we handle. We propose chains tailored to your production processes and environment. We efficiently solve various challenges and waste, such as costs and labor. Please feel free to contact us when you need assistance. 【Features】 ■ Total cost reduction ■ Reduction of jig installation labor ■ Centralized management with drawings (drawing numbers) ■ Centralization of suppliers *For more details, please refer to the PDF materials or feel free to contact us.

• Chains and sprockets

We would like to introduce our "ventilation fan for ducts." It reduces dirt adhesion, decreases cleaning frequency, and contributes to maintaining ventilation performance. The blade section features a hybrid nano-coating plus, and the grill section uses dual barrier material. Please feel free to contact us if you have any inquiries. 【Features】 ■ Reduces dirt adhesion ■ Decreases cleaning frequency ■ Contributes to maintaining ventilation performance *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and Exhaust

The "ULTAGE Series WA Type" is a sealed self-aligning roller bearing developed to meet the demands for long life, improved reliability, and enhanced handling in various industrial machinery. By adopting the EA type with a "cage-type" steel plate stamped retainer that maximizes the roller diameter and number of rollers, we achieve high load capacity and long life. By standardly incorporating oil holes and oil grooves on the outer diameter surface of the outer ring, we ensure reliable grease supply to the interior of the bearing. 【Features】 ■ Achieves high load capacity and long life ■ Compact design that minimizes seal volume ■ Prevents foreign matter intrusion by using specially designed contact rubber seals ■ Ensures stable dust resistance with unchanged contact surface pressure of the seals ■ Initially sealed with long-life grease inside the bearing *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

We would like to introduce our water flow controller, the 'FC3W Series'. It allows for stepless control of water flow in proportion to the electrical signal. Even if the upstream pressure changes, it is possible to maintain a constant flow rate for each line. Please feel free to contact us if you have any inquiries. 【Features】 ■ Stepless control of water flow in proportion to the electrical signal ■ Ability to maintain a constant flow rate for each line even if the upstream pressure changes *For more details, please refer to the PDF document or feel free to contact us.

• controller

We would like to introduce our one-touch pipe fitting nozzle 'KNA(G)-Q10-180'. It complies with OSHA standards (1910.242(B)). The outlet is designed to be unsealed, ensuring that only 30 psi of pressure is exerted even if the operator comes into contact with the nozzle, making it a safe design. Additionally, it allows for a significant reduction in air consumption while maintaining a blow range equivalent to that of a comb nozzle. Please feel free to contact us if you would like to place an order. 【Features】 ■ Complies with OSHA standards (1910.242(B)) ■ The outlet is designed to be unsealed ■ Safe design that exerts only 30 psi of pressure even if the operator comes into contact with the nozzle ■ Significant reduction in air consumption while maintaining a blow range equivalent to that of a comb nozzle ■ Lower noise compared to nozzles with male threads at the same impact pressure *For more details, please refer to the PDF document or feel free to contact us.

• nozzle

We would like to introduce our small-scale speed controller, the 'AS-FSA Series'. The height dimension has been reduced by up to 5.5mm. With the auxiliary scale display, fine adjustments can be made in increments of 1/4, reducing work hours and setting errors. Additionally, inspection and maintenance tasks are made easier with the ability to check from all 360° directions. Please feel free to contact us if you have any inquiries. 【Features】 ■ Flow rate can be managed numerically through the scale window ■ Height dimension reduced by up to 5.5mm ■ Fine adjustments possible in increments of 1/4 with the auxiliary scale display ■ Reduces work hours and setting errors ■ Inspection and maintenance tasks are made easier with 360° visibility *For more details, please refer to the PDF document or feel free to contact us.

• controller

This catalog contains information about "rolling bearings." The technical explanation includes the structure and types of rolling bearings, an overview of bearing selection, selection of bearing types, selection of bearing arrangements, and selection of bearing dimensions. The bearing dimension table introduces standard series and specific application series. We also include appendices and indexes, so please feel free to read through them. 【Contents (partial)】 <Technical Explanation> ■ Structure and Types of Rolling Bearings ■ Overview of Bearing Selection ■ Selection of Bearing Types ■ Selection of Bearing Arrangements ■ Selection of Bearing Dimensions *For more details, please refer to the PDF materials or feel free to contact us.

• Metal bearings

We would like to introduce the "Robot Safety Option for MELFA F Series" that we handle. With the establishment of a safety input function, it is possible to open the safety door without triggering an emergency stop of the robot. During collaborative work, it continues to operate at a safe speed to ensure the safety and peace of mind of personnel. Additionally, when the safety door closes, it automatically switches from collaborative work to standalone operation and resumes access to the shared area. 【Features】 ■ The robot continues to operate autonomously even when the safety fence door is open. ■ Shared work area between humans and robots = collaborative work is possible. ■ The robot maintains a safe speed during collaborative work. ■ Automatic recovery from collaborative work to standalone operation is possible. ■ High safety that meets international standards. *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots

The Side Clamp "LSA" is a clamp specialized for lateral pressure that cannot be accommodated by standard link clamps. It is suitable for offsetting to the workpiece reference surface. Even with workpieces that do not have clamping edges, it can clamp and secure the sides. Additionally, we also offer the high-power side clamp "LSE," which has a strong clamping force due to its leverage mechanism. 【Features】 <Side Clamp> ■ Suitable for offsetting to the workpiece reference surface ■ Can clamp and secure the sides even with workpieces that do not have clamping edges ■ Same mounting dimensions as swing/link clamps ■ Zero interference from the top surface *For more details, please refer to the PDF materials or feel free to contact us.

• Vice Clamps

The mechanical pump "GP Series" is a drain recovery pump that does not require electricity. The power source is steam or compressed air available on-site. It utilizes the pressure of the operating gas (steam, compressed air, nitrogen) to powerfully pump the drain. Additionally, we also offer the "GT Series," which combines a mechanical pump with a steam trap. 【Features】 <GP Series> ■ No electricity required ■ Easy drain recovery ■ System package ■ Significantly reduces the effort required for system design and piping design/construction *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

We would like to introduce the "Thrust Pad" that we handle. Products such as "SCPS," "SCPS-KR," and "SCPS-KS" are made of stainless steel with excellent corrosion resistance. They can be assembled simply by pushing the grub screw straight into the thrust pad. Additionally, they are effective when the surface of the workpiece is inclined. Please feel free to contact us if you need any assistance. 【Features】 <SCPS> ■ Made of stainless steel with excellent corrosion resistance ■ Can be assembled by simply pushing the grub screw straight into the thrust pad ■ Effective when the surface of the workpiece is inclined ■ Can tilt up to about 12° relative to the grub screw ■ Large diameter pad reduces surface pressure *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

The "Mini Frame Take-Up Type Ball Bearing Unit" is a product designed to be smaller and lighter than conventional units, allowing for the adjustment of the shaft center to provide tension for applications such as belt conveyors. The fitting surfaces of the bearing and bearing box are spherical, enabling smooth alignment. Additionally, installation onto the machine base is done with four mounting bolts, and securing to the shaft can be accomplished with set screws. Please feel free to contact us if you have any inquiries. 【Features】 ■ Compact and lightweight ■ Large adjustment range ■ Sufficient rigidity ■ Smooth alignment ■ Easy installation *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

We would like to introduce the "end plate" that we handle. We offer applications such as single-hole type, double-hole type, and in-row type, which can be used for preventing sprocket disengagement and securing bearings. Additionally, we have two types of materials/surface treatments: "Iron (S45C) / Black oxide" and "Stainless steel (SUS304)." 【Applications】 ■ Single-hole type ■ Double-hole type ■ In-row type *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements