藤川伝導機 Product Lineup

"Santa Car" is a product that uses elastomer for its wheels, making it a clean and gentle material that does not damage floors. When under no load (light load), the speed of the table (fork) rises 2 to 3 times, improving work efficiency. You can choose from various types according to your needs, including table type, fork type, low-floor type, battery type, and roll type. 【Features】 ■ Sprocket cover ■ Plated chain ■ Lifting rollers ■ Quick lift mechanism ■ Double wheel casters (standard type) ■ Built-in automatic load check valve *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines
• lift

We would like to introduce the "handle-type brake" that we offer. It can be easily installed by simply drilling two brake mounting holes, and it comes with an adjustment plate that allows for approximately 25mm lateral fine-tuning to push the center of the rail. By installing it, not only is it stable and safe during loading, but also during movement or work on the loading platform. 【Features】 ■ Turning the handle 1/3 to 1/4 of a rotation raises or lowers the brake by about 5mm ■ When you release the handle, it descends due to its own weight ■ Ideally, two units should be installed on each cart (one on each side towards the front) *For more details, please refer to the PDF document or feel free to contact us.

• brake

The "Hypoid Motor Mini Series" is a product that transmits high torque without torque limitations during low output shaft rotation at high reduction ratios. To reduce power consumption and generate high output, we carefully selected parts and prioritized efficiency in the design. Compared to worm types, it has less slippage, achieving high efficiency and cost reduction. The mounting pitch on the top and bottom of the case is the same, making it easy to install in different orientations. 【Features】 ■ High torque ■ High efficiency ■ Long lifespan ■ Flexible installation ■ Wide range of reduction ratios ■ Outdoor type is equivalent to IP65 *For more details, please refer to the PDF materials or feel free to contact us.

• Other motors

The "IKO Pillow Ball" is a self-aligning spherical sliding bearing that can simultaneously support large radial loads and bi-directional axial loads in a small volume. The insert type makes contact with a special copper alloy bushing that is compatible with the spherical inner ring, while the die-cast type contacts a special zinc die-cast alloy with the spherical inner ring. The oil-free type contacts a self-lubricating special PTFE liner with the spherical inner ring, allowing for smooth rotation and tilting motion, and it excels in wear resistance and load-bearing capacity. Additionally, the pillow ball rod end has internal or external threads machined into the main body, making installation easy. 【Features】 ■ There are insert type, die-cast type, and oil-free type depending on the type of sliding surface. ■ The oil-free type is particularly suitable for applications where a constant directional load is applied, making it ideal for areas that dislike oil, such as food machinery, or in locations where lubrication is not possible. *For more details, please refer to the PDF materials or feel free to contact us.

• Metal bearings

This document is a technical and reference material for "tubes and tube fittings." The technical material includes flow characteristics of speed controllers, effective cross-sectional areas, a list of negative pressure performance, and operating manuals for each product. The reference material includes TES tube technical data, a list of applicable standards, a list of thread standards, and full-size tables for tubes and threads. [Contents (excerpt)] ■ Technical Material - Flow characteristics of speed controllers - Effective cross-sectional area - List of negative pressure performance - Operating manuals *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

The "Swing Clamp with Operation Confirmation Function" is a high-pressure swing clamp that can detect locking and releasing operations with a single port. By equipping a metal coil scraper as standard, it prevents damage to the internal dust seal and maintains high sealing performance for an extended period. The internal dust seal uses sealing material with excellent chemical resistance, ensuring high durability even with chlorine-based coolants. 【Features】 ■ Prevents damage to the dust seal with a metal wiper ■ Directly mountable speed control valve ■ Same dimensions regardless of operation confirmation type ■ High-capacity structure and high-speed operation due to optimal design ■ Reduced number of sensors ■ Reduced number of ports and easy processing *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

This catalog introduces the "lead screws" that we handle. It mainly features "feed screws" used to convert rotary motion into linear motion to move the position of components. It includes information on product materials and dimensions, as well as single pitch error, cumulative pitch error, and development diagrams. Please take a look. [Contents (excerpt)] ■ 30-degree trapezoidal feed screws ■ High-lead feed screws ■ Small-diameter high-lead cutting feed screws ■ Small-diameter feed screws ■ Small-diameter spherical feed screws, backlash-free nuts *For more details, please refer to the PDF document or feel free to contact us.

• nut
• bolt

This catalog introduces the "duct system components" that we handle. It includes various "control components" that automatically control the operation and stop of ventilation fans, as well as "outdoor terminal components" made of stainless steel, which are designed with rust resistance in mind and are used in all outdoor hoods, featuring SUS + powder coating. We also provide a list of equivalent straight pipe lengths and a list of pressure loss coefficients, so please make use of them for product selection. [Contents] ■ Outdoor terminal components ■ Intermediate mounting components ■ Indoor terminal components ■ (Natural) air supply units ■ Ceiling-mounted and adjustable brackets ■ Control components *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and Exhaust
• Other air conditioning equipment

The "ULTAGE Series EMLLX Type" is a sealed self-aligning roller bearing developed to meet the demands for long life, improved reliability, and enhanced handling in a wide variety of industrial machinery. Since it has the same dimensions as open-type bearings that comply with ISO standards, it can be replaced without changing the dimensions of surrounding components. The seal is fixed with a retaining ring structure, allowing for easy attachment, detachment, and replacement of the seal. 【Features】 ■ Complete compatibility with open-type bearings ■ Use of detachable seals ■ Adoption of thin special seals ■ Lubrication specifications tailored to requirements *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The "PFMV5 Series" is a flow sensor that allows for space-saving installation as it does not require a straight pipe section. By tapering the flow path in front of the sensor chip, stable sensing is achieved, resulting in high repeatability and miniaturization. Additionally, we also offer the "PFGV301 Series," a three-screen digital flow monitor that enables remote line monitoring for centralized flow management. 【Features】 ■ Repeatability accuracy: ±2% F.S. ■ Response speed: Less than 5 ms ■ Pressure resistance: 500 kPa ■ Non-grease *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "AMS20/30/40/60 Series" is an air management system that reduces air consumption by lowering pressure during production stoppages or equipment standby times. By using a residual pressure exhaust valve to cut off the air supply, further reductions in air consumption are possible. Additionally, it is equipped with an automatic isolation mode that can be activated to shut off after a set time from standby mode. 【Features】 ■ Reduces air consumption by cutting off valves during equipment downtime ■ Visualizes production equipment status ■ Compatible with SMC wireless systems ■ High security through encryption ■ Can be retrofitted to existing equipment *For more details, please refer to the PDF document or feel free to contact us.

• Pressure Control
• Pneumatic Equipment

We would like to introduce our longevity-enhancing cylinder, the 'CU-XB24'. Compared to existing products, it has over four times the durability. The standard strokes are as follows: ø6, ø10, ø16 are 5-30, and ø20, ø25, ø32 are 5-50. The cushion is a rubber cushion. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■ Operating fluid: Air ■ Guaranteed pressure resistance: 1.05MPa ■ Maximum operating pressure: 0.7MPa ■ Lubrication: Non-lubricated ■ Operating piston speed: 50-500mm/s ■ Rod end thread: Male thread *For more details, please refer to the PDF document or feel free to contact us.

• cylinder

This document provides an explanation of the damage to rolling bearings, along with its causes and countermeasures. It includes information on the timing and causes of failures, as well as general classifications and types of damage and their locations. We introduce various examples of damage such as flaking, pitting, indentations, and impacts, along with their causes and countermeasures, so please take a look. [Contents] ■ Bearing failures ■ Bearing damage ■ Damage and its causes and countermeasures *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The "MELFA CRH Series" is an industrial robot that achieves outstanding cost performance and is compact and lightweight. It is capable of constructing additional axis control, allowing for control of up to 8 axes excluding the robot itself. The implementation of a memory function in the internal board eliminates the need for origin input work during startup. There are application examples such as pick & place, labeling, and tracking. 【Features】 ■ Lightweight design of the robot body ■ Standard equipped with CC-Link IE Field Basic ■ Intelligent functions can also be utilized through Smart Plus compatibility ■ Significant reduction in startup time at the site where the robot is introduced *For more details, please refer to the PDF materials or feel free to contact us.

• SCARA Robot

The "Magnet Clamp System" is a product that can be installed on a wide variety of molding machines ranging from 50 tons to 3000 tons. When attaching or detaching molds, the magnet clamps installed on the fixed and movable sides can instantly attach or detach the molds, thereby reducing mold change time and enabling single setups. Both locking and releasing operations can be completed by simply pressing a button for a few seconds, significantly simplifying the mold loading and unloading process. 【Features】 ■ Quantification of invisible magnetic force ■ High durability due to metal face ■ Achieves waterproofing equivalent to IPX5 ■ Detachment detection function using proximity switches ■ Multifunctional operation pendant that clearly indicates the system's status ■ Control unit with excellent environmental resistance *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Other molds
• Vice Clamps

The "RT3A" is a radiator trap designed with a large valve opening and valve passage area, allowing for quick blowing of debris and scale. By adopting a spherical ball valve, it achieves a reliable seal. It has minimal steam leakage and excellent durability. Additionally, the over-expansion absorption effect of the coil spring inside the cover extends the lifespan of the thermo element. 【Features】 ■ Just open the valve when the heating season starts ■ No troublesome tasks required at the beginning of ventilation ■ Internal component replacement is a one-touch operation by simply opening the cover ■ A wrench can be applied to the piping nipple, making maintenance after installation easy *For more details, please refer to the PDF materials or feel free to contact us.

• valve

We would like to introduce the "Clamp Lever" that we handle. We offer a lineup including the male thread type and reamer hole type "LDF/LDFE/LDFS/LDR," as well as the stainless steel threaded "LDMS-CR/LDFS-CR." Additionally, we have the practical clamp lever with a serration ring made of zinc die-cast inserted into a plastic lever body. 【Features】 ＜LDF/LDFE/LDFS/LDR＞ ■ Male thread type and reamer hole type ■ The lever part features a matte finish electrostatic coating that minimizes visible scratches ■ The lever part is available in four color variations *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Vice Clamps

This document provides information about "Camera/LED Lighting Brackets." It introduces compatibility charts for major manufacturers' cameras and LED brackets, as well as applications. It also includes attachments, shafts, and single plates that support mounting to stands and shafts, so please feel free to take a look. 【Contents (partial)】 ■ Compatibility chart for camera models and brackets ■ Compatibility chart for LED lighting models and brackets ■ Compatibility chart for LED lighting (square) models and brackets ■ Application introductions ■ Camera brackets *For more details, please refer to the PDF document or feel free to contact us.

• bracket

This document provides information about "parallel shaft gears." It introduces the product codes for parallel shaft gear products, methods for selecting parallel shaft gears, and points to consider during selection. Additionally, it includes product specifications and a wide range of offerings for spur gears and helical gears, so please feel free to read through it. [Contents (partial)] ■ Product codes for parallel shaft gear products ■ Methods for selecting parallel shaft gears ■ Product documentation for parallel shaft gears *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce the "Horizontal Roller" that we handle. Since it uses urethane rubber, it is suitable for moving the lateral wheels while the crane is in operation. It prevents wear on the inside of the flange on the outer circumference of the lateral wheels. Installation and removal are easy, and it is also possible to adjust the gap between the left and right rollers. Please feel free to contact us when you need assistance. 【Features】 ■ Suitable for moving the lateral wheels while the crane is in operation ■ Prevents wear on the inside of the flange on the outer circumference of the lateral wheels ■ Easy installation and removal ■ Gap adjustment between left and right rollers is possible ■ The outer roller part is made of hard urethane rubber *For more details, please refer to the PDF document or feel free to contact us.

• roller

This document provides information about "small gear motors." It introduces the "Plus Alpha Series," featuring characteristics such as IoT specifications, shock relay specifications, and hollow shaft type keyless specifications, illustrated with diagrams and graphs. The "Just Fit Model" includes details on waterproof specifications, heat-resistant specifications, cold-resistant specifications, and food-grade specifications, along with a wide variety of models, so please feel free to read through it. 【Contents (partial)】 ■ IoT specifications ■ Shock relay specifications ■ Hollow shaft type keyless specifications ■ Rotary encoder specifications ■ Pulsation specifications ■ Shock guard specifications *For more details, please refer to the PDF document or feel free to contact us.

• Other motors

The "Elball" is an automatic self-aligning spherical sliding bearing that integrates a body made of a special zinc die-cast alloy with a ball stud that has a crossed axis. Thanks to the constant gap on the sliding surface, it can perform rotation, oscillation, and tilting motion with low torque, allowing for smooth power transmission. Additionally, it has excellent wear resistance, maintaining stable precision over a long period, and is easy to maintain, making it a cost-effective bearing. A dust cover for the Elball is also available. 【Features】 ■ Capable of rotation, oscillation, and tilting motion with low torque ■ Enables smooth power transmission ■ Excellent wear resistance ■ Maintains stable precision over a long period ■ Easy to maintain and highly economical *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The "SCNL-HD" is a flange hexagonal bag nut designed with a hygienic design, suitable for food machinery and pharmaceutical machinery where hygiene management is required. The gap on the mounting surface is sealed with the sealing ring FSRN-HD, preventing the intrusion of foreign substances and liquids. The surface finish is less than Ra0.8μm, providing excellent cleanability. Additionally, the "SCNL-HP-HD" is also available. 【Features】 ■ Hygienic design ■ Prevents the intrusion of foreign substances and liquids ■ Made from materials compliant with the standards of the U.S. Food and Drug Administration (FDA) ■ Excellent cleanability ■ The main body is made of corrosion-resistant SUS316L *For more details, please refer to the PDF document or feel free to contact us.

• nut

This document provides information about "breakers and switches." For "no-fuse breakers" and "earth leakage breakers," we introduce product specifications and lineups for each circuit, such as blade breakers (for station branch circuits) and smart sizes (for home distribution board branch circuits). Additionally, we provide detailed information on "motor breakers," "various breakers," "parts," and include diagrams of breaker outer diameter dimensions as part of the documentation. [Contents] ■ No-fuse breakers ■ Earth leakage breakers ■ Motor breakers ■ Various breakers and others ■ Documentation *For more details, please refer to the PDF document or feel free to contact us.

• Circuit breakers and switches

The "TTA" is a custom-made, compact double-acting direct-acting cylinder that pursues extreme compactness. It operates at high pressure (1.5 to 25 MPa) and allows for stroke specifications in 1mm increments (from 1mm to 200mm). A speed control valve (BZT-A) can be installed, making synchronization and speed adjustment easy. Additionally, we offer "control valves" and "G-thread fittings." Please feel free to contact us for inquiries. 【Features】 ■ Custom-made for extreme compactness ■ High pressure (1.5 to 25 MPa) ■ Stroke specifications in 1mm increments (from 1mm to 200mm) available ■ Speed control valve (BZT-A) can be installed ■ Easy synchronization and speed adjustment *For more details, please refer to the PDF document or feel free to contact us.

• cylinder

The "Large Conveyor Sprocket Smart Replacement Series" is a product that allows for replacement without the need to install or remove components such as bearings. The checker eye can notify you of the replacement timing, and it is possible to replace the tooth section without pulling it from the shaft. It accommodates a wide range of operating environments with three types, reducing running costs. 【Features】 ■ Significant reduction in inspection time and labor ■ Brass pin embedded specification ■ Judgement possible without using dedicated tools such as tooth shape gauges ■ Replacement timing can be confirmed at a glance, enabling smooth inspections ■ Reduced running costs *For more details, please refer to the PDF document or feel free to contact us.

• gear

We would like to introduce the 'Lossnay' products for commercial and equipment use that we handle. We offer a wide range of products by type, including the "Commercial Lossnay Ceiling Embedded Type" and "Commercial Lossnay Ceiling Embedded Type with Humidification," both equipped with a high-efficiency DC brushless motor. In addition, for equipment use, we also have "Floor Standing Type," "Floor Standing Built-in Type with Humidification," and "Outside Air Processing Units." Furthermore, there are many variations of "Ventilation Fans" and "Duct System Components" available. 【Product Lineup (Partial)】 <Commercial Lossnay Ceiling Embedded Type> ■LGH-N15RXW2 ■LGH-RN15RXV2 ■LGH-RN15RXV2D ■LGH-N25RXW2 ■LGH-RN25RXV2 ■LGH-RN25RXV2D *For more details, please refer to the PDF materials or feel free to contact us.

• Ventilation and Exhaust

The "ULTAGE Series" is a product developed to meet the demands of various industrial machinery for "long life," "high speed," and "improved handling." By maximizing the diameter and number of rollers, we achieve a long lifespan with a high level of high load capacity. Additionally, we have adopted a new cage-type steel plate punched retainer, which realizes a high level of permissible rotational speed. We have adopted a simplified cage-type steel plate punched retainer, allowing for use with oil and grease lubrication, thereby expanding the range of applications. 【Features】 ■ High level of high load capacity ■ Extended maintenance intervals ■ 200°C heat resistance ■ High level of permissible rotational speed ■ Adoption of a simple-shaped cage-type steel plate punched retainer *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The "LET-X11 Series" is a large slider type belt-driven electric actuator. It allows for easy replacement of the timing belt without interference with the work motor. Contactless auto switches can be installed (for limit confirmation and intermediate signal confirmation). Additionally, we offer a wide range of "AC servo motor drivers." Please feel free to contact us when needed. 【Features】 ■ Slim and low center of gravity ■ Easy replacement of the timing belt ■ No interference with the work motor ■ Contactless auto switches can be installed (for limit confirmation and intermediate signal confirmation) ■ Improved maintenance when replacing the belt *For more details, please refer to the PDF materials or feel free to contact us.

• Actuator

The "CY3B Series" is a magnetically operated rodless cylinder that has reduced mass through its body, head cover shape, and magnetic coupling. A lubricant retainer is placed in the piston area to maintain lubrication, ensuring that a lubrication film is always formed, which improves lubrication performance. By extending the body-side wear ring by up to 30%, smooth operation has been achieved. Please feel free to contact us when you need assistance. 【Features】 ■ Lightweight ■ Improved lubrication ■ Stable operation *For more details, please refer to the PDF document or feel free to contact us.

• cylinder

We would like to introduce the pilot check valve compact type, "AKP Series," which we handle. We offer two types: one with a "residual pressure exhaust function" that allows for the construction of a safety circuit, and another without the "residual pressure exhaust function" that enables temporary intermediate stops. Please feel free to contact us when you need assistance. 【Features】 ■ Vertical/horizontal types available according to installation conditions ■ Improved piping flexibility (360° rotating type) *For more details, please refer to the PDF document or feel free to contact us.

• valve

We would like to introduce our "Product Series for Use in Semiconductor Manufacturing Processes." Our offerings include high-precision spindles for edge grinders, double-sided flat grinding machines for wafers, and high-rigidity spindles for CMP equipment, all of which can be utilized in various stages of semiconductor manufacturing. Please feel free to contact us if you have any inquiries. 【Product Lineup (Partial)】 ■ Spindles for edge grinders ■ Double-sided flat grinding machines for wafers ■ Bearing units for vertical diffusion furnace table units ■ Bearing units for wafer transport devices ■ Bearings for wafer transport devices *For more details, please refer to the PDF document or feel free to contact us.

• Other semiconductors
• Metal bearings

We offer "Robot Safety Solutions" for the MELFA FR series of industrial robots. This is suitable for challenges such as wanting to use industrial robots without safety fences or wanting to achieve safe and highly productive robotic systems. The position monitoring function (SLP) can limit the operating range and prevent robots from entering areas where people are present. 【Features】 ■ Position monitoring function ■ Speed monitoring function ■ Stop monitoring function ■ Safety I/O ■ Safety communication function ■ Safety logic editing *For more details, please refer to the PDF materials or feel free to contact us.

• Other security and surveillance systems

The "Mold Locator" is a product that allows for positioning molds at different height levels simply by inserting and removing them. It enables easy mold positioning without the need for a locate ring, thus saving time. We offer three types according to the capacity of the target molding machine. Please feel free to contact us when you need assistance. 【Features】 ■ Easy positioning of molds with different heights ■ No locate ring required ■ Reduces mold change time *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "LEX3N-TZ/LEX8-TZ" is a trap that allows you to set the temperature of the discharge drain as desired. By adjusting the set temperature, it maintains the oil or liquid in the oil supply pipe and heating tank at the required temperature. Additionally, it saves steam through proper heating. While still piped, it allows for free adjustment of the drain discharge temperature, enabling the quick expulsion of initial air and drain without causing air disturbances. 【Features】 ■ Maintains the oil or liquid in the oil supply pipe and heating tank at the required temperature ■ Saves steam through proper heating ■ Prevents steam leakage ■ Allows free adjustment of drain discharge temperature while still piped ■ Quickly expels initial air and drain *For more details, please refer to the PDF materials or feel free to contact us.

• Other environmental equipment

We would like to introduce the "Clamp Lever" that we handle. It is made entirely of stainless steel, offering excellent corrosion resistance and strength. Additionally, we also have the "Mini Clamp Lever" available. Both the "Clamp Lever" and "Mini Clamp Lever" come in a wide range of products. Please feel free to contact us when you need assistance. 【Features】 ＜LDCFS-AS-HP＞ ■ Made entirely of stainless steel ■ Excellent corrosion resistance and strength ■ The set screw has no recess, making it difficult for dirt and dust to accumulate ■ Superior cleanability, making it suitable for food machinery and pharmaceutical machinery that require hygiene management ■ The surface of the lever is polished. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This catalog introduces vacuum pad brackets that achieve weight reduction with aluminum and sheet metal specifications. It features a wide range of products, including the flat series/light series for multi-joint robots and air cylinders, as well as stop screw type/wedge type for scara robots. Since they can be directly mounted, they are hassle-free and convenient for aligning the pads, with options that include memory features. They are compatible with vacuum pad mounting screw size M5. [Contents (partial)] ■ Flat Series ■ Light Series ■ Stop Screw Type ■ Wedge Type ■ E Type *For more details, please refer to the PDF document or feel free to contact us.

• bracket

This catalog introduces rack gears. It includes explanations of product codes for rack gear products, selection methods, and important considerations for selection, as well as the completed rack gear "KLRW" and the double-end processed rack gear "LRW." The tangential load values listed in the catalog are calculated based on the "Permissible Transmission Power Calculation Condition Table." Additionally, all spur gears within the same module can be used as pinion gears. [Contents] ■ Product codes for rack gear products ■ Rack gear selection methods ■ Rack gear product documentation ■ Completed rack gear "KLRW" ■ Double-end processed rack gear "LRW" *For more details, please refer to the PDF documentation or feel free to contact us.

• Other machine elements

We would like to introduce our servo motor reducer "TERVO." We offer a wide range of gear lineups, including worm gears, hypoid gears, and helical gears, compatible with various servo motors. By servo-optimizing general-purpose gear heads, we achieve high cost-effectiveness and short delivery times. 【Product Lineup】 ■ Worm Gear Head SWJMK・SWMK (Hollow Shaft) ■ Worm Gear Head EWJMK・EWMK (Solid Shaft) ■ Hypoid Gear Head HMTK-H (Hollow Shaft) ■ Hypoid Gear Head HMTK-U (Solid Shaft) ■ Helical Gear Head GMTK-U, GMTK-F (Face Mount, Flange Mount) ■ Helical Gear Head GMTK-L (Leg Mount) *For more details, please refer to the PDF document or feel free to contact us.

• Gearbox

The "TE…B" is a positioning table that uses high-strength aluminum alloy for its main components and features a slide table positioned inside a U-shaped bed. The mass of the table is reduced to about 40% of the TU series. The cross-sectional heights are low, with 26mm for TE50B, 33mm for TE60B, and 46mm for TE86B. Various sensors can be directly mounted on the sensor mounting grooves of the bed, contributing to space-saving. 【Product Specifications】 ■ Drive: Precision ball screw ■ Linear guide device: Linear way (ball type) ■ Built-in lubrication components: Built-in lubrication component "C loop" ■ Material of table and bed: High-strength aluminum alloy ■ Sensors: Selected by designation number *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "SFHL-HD" is a hygienic design hex bolt. It is suitable for applications in food machinery and pharmaceutical machinery where hygiene management is required. The main body is made of SUS316L, which has excellent corrosion resistance. The sealing ring uses a blue color that is easily identifiable with food. Additionally, it is made from materials that comply with the standards of the U.S. Food and Drug Administration (FDA). 【Features】 ■ The surface finish of the hex head is less than Ra0.8μm ■ Excellent cleanability ■ Complies with the guidelines set by EHEDG (European Hygienic Engineering & Design Group) ■ Usable temperature: -25℃ to 150℃ *For more details, please refer to the PDF document or feel free to contact us.

• bolt

In this catalog, we introduce distribution boards, switchgear panels, and incoming panels. We offer a wide lineup including lighting distribution boards in smart branch size, branch MCB SB size, branch half size, and branch ELB SB size, as well as power distribution boards, lighting and power distribution boards, and tenant distribution boards. Additionally, the "Smart Compo Panel," equipped with smart breakers for branch circuits, features a slim size of 20mm in width, allowing for a size reduction of 200 to 300mm in height compared to SB size distribution boards, achieving approximately 20% weight reduction. [Contents (partial)] ■ Lighting distribution board (branch smart size) ■ Lighting distribution board with remote relay (branch smart size) ■ Lighting distribution board with full 2-wire remote relay (branch smart size) ■ Lighting distribution board with automatic blinking circuit (branch smart size) ■ Lighting distribution board with lower space (branch smart size) *For more details, please refer to the PDF document or feel free to contact us.

• Distribution Board

The "VFH" is a high-precision positioning pin with hydraulic control that expands and contracts. It has a large clearance when contracted, making it easy to accommodate automation such as robot transport. (Repeat positioning accuracy of 10μm) Air blowing from inside the cylinder is discharged through the gap of the gripper, preventing the intrusion of foreign objects from the outside. 【Features】 ■ Large expansion amount of 1.1mm ■ Easy to accommodate automation and robots ■ Easy inspection of mounting position accuracy ■ Durability ■ Suitable for automation and robots *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Pin Gear Drive Unit" is a drive unit that comes with a pin gear that meshes with a pin rack or pin wheel. The pin rack or pin wheel is composed of a frame, bush, and roller. The bush is made entirely of hollow pins and can be used as mounting holes. The tooth profile of the pin gear adopts a unique shape that ensures smooth meshing with the pin rack and pin wheel, as well as guarantees strength. 【Features】 ■ Easy installation ■ High torque transmission ■ Suitable for large equipment *For more details, please refer to the PDF document or feel free to contact us.

• Drive system parts

We would like to introduce the "Local Use Lossnay" that we handle. With the "Move Fit Frame" that maintains the airtightness of the airflow path, an effective ventilation rate average of 98% is achieved. Additionally, by adopting the "High Airtightness Sensible Heat Element," it prevents humidity that causes odor transfer from exhaust to intake, making it suitable for use in localized spaces where odors are a concern. 【Features】 ■ Uses sensible heat Lossnay element ■ Equipped with multi-ventilation mode ■ Special strong notch included ■ Direction changeable for outdoor duct (OA outside air, EA exhaust) ■ One inspection space *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment