藤川伝導機 Product Lineup

We would like to introduce our "Premium Shell Bearings." These bearings feature a special heat treatment (special carburizing and nitriding process) as standard, which has a proven track record in extending lifespan. They alleviate stress concentration at the ends of the rollers caused by mounting errors and heavy loads (edge loading), contributing to improved lifespan. 【Features】 ■ Lifespan improvement: 3 times ■ Static load capacity improvement: 1.5 times ■ Reduced and stabilized pressure input *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings
• Metal bearings

We would like to introduce our digital flow switch for water, the 'PF3W-Z/L Series'. The upper display shows the instantaneous flow rate, while the lower display shows the set value, cumulative value, peak value/bottom value, line name, and fluid temperature, all in a three-color, dual-screen format. It supports two analog outputs (flow rate + temperature), allowing monitoring of flow rate and temperature not only at the installation site but also remotely. 【Features】 ■ Compatible with temperature sensors and flow control valves ■ Operating fluid temperature: 0 to 90℃ ■ Display unit can be rotated ■ Compatible with ethylene glycol aqueous solutions ■ Non-grease specification *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

We would like to introduce our membrane air dryer, the "IDG-D Series." By adopting hollow fiber membranes, it allows for easy and convenient supply of dry air. It reduces pressure drop by up to 61%, improves outlet air flow by up to 25%, and has a purge rate of approximately 14%, contributing to energy savings. The purge air discharge outlet can be directed in any preferred direction, 360°. 【Lineup】 ■IDG20-D ■IDG30-D ■IDG40-D *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

We would like to introduce our antibacterial, deodorizing, and sterilizing filter, the 'HF2-BF□ Series'. The antibacterial activity value is 4 or higher, the bacterial capture performance is LRV≧9, and the secondary side oil concentration is below 0.003mg/m3. The maximum processing flow rate is 800L/min (ANR) for size 40. It is suitable for applications such as the removal of debris (container adhesion), blowing into bread, and dental-related equipment. 【Variations】 ■ Antibacterial Filter HF2-BFA Series ■ Antibacterial Filter HF2-BFB Series ■ Deodorizing Filter HF2-BFC Series ■ Sterilizing Filter HF2-BFD Series *For more details, please refer to the PDF document or feel free to contact us.

• filter
• filter
• Other filters

We would like to introduce our "New Ceramic Ball Bearings for Motors." The coefficient of linear expansion is close to that of the inner and outer ring materials (bearing steel SUJ2), resulting in minimal changes in the internal clearance of the bearing due to temperature variations, making it suitable for a wide range of temperature environments. It possesses similar insulation properties, strength, and durability (changes in acoustic values) as conventional insulating materials such as silicon nitride (conventional ceramics Si3N4). 【Material Properties (Partial)】 ■ Density (g/cm3): 6 ■ Coefficient of Linear Expansion (1/℃): 10.5×10^−6 ■ Vickers Hardness (HV): 1280 ■ Longitudinal Elastic Modulus (GPa): 210 ■ Poisson's Ratio: 0.31 *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

"MELFA SmartPlus" is an option for expanding the functions of Mitsubishi Electric's industrial robots. It detects abnormalities in drive components before signs of abnormal behavior appear in the robot. This enables a reduction in downtime for production equipment. Additionally, by tracking the operational status, it manages the condition of the robot and facilitates efficient maintenance. 【Functions (partial)】 ■ Predictive maintenance function ■ Preventive maintenance function ■ Force sensor expansion function ■ MELFA-3D Vision expansion function ■ 2D vision sensor expansion function *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots

The "Model MHL" is a leveling unit that completes leveling simply by placing the mold on it. It can accommodate a maximum mold loading weight of up to 2.5 tons. The variation in mold height dimensions can be handled up to a maximum of 125 mm. With a compact design, the interference area is minimal, and the air circuit consists of a simple single system, eliminating the need for switching operations with valves. 【Specifications (partial)】 ■ Allowable angle during mold loading: 5° ■ Repetition accuracy: 0.3° ■ Total stroke: 100 for S, 150 for L ■ Operating fluid: Dry air ■ Operating temperature: 0 to 120°C *For more details, please refer to the PDF document or feel free to contact us.

• Level gauges and level switches

The "SST" series is a steam trap designed for steam transport piping applications. The body and valve seat are made of stainless steel, which is resistant to rust and highly corrosion-resistant, ensuring a long lifespan and the ability to maintain high initial performance over an extended period. Additionally, the bimetallic element reacts to temperature, forcibly lifting the float at low temperatures to automatically and quickly discharge air and low-temperature condensate. 【Features】 ■ Adopts a three-point float support mechanism ■ Utilizes stainless steel for the body ■ Built-in bimetal automatic blow-off mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials

The "LDMS-HD-E" is a hygienic design clamp lever. It is suitable for applications in food machinery and pharmaceutical machinery where hygiene management is required. The lever part is made of stainless steel equivalent to SUS316, which has excellent corrosion resistance. The mounting surface and sliding parts are sealed to prevent foreign substances and liquids from entering the gaps inside the clamp lever and the mounting surface. 【Features】 ■ Surface finish is less than Ra0.8μm ■ Excellent cleanability ■ Seal ring is made in a light blue color for easy identification with food ■ Materials comply with the standards of the U.S. Food and Drug Administration (FDA) ■ Usable temperature: -40℃ to 120℃ *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

We would like to introduce the "Pressure Gauge Bracket" that we handle. It is compatible with major pressure gauges and can accommodate up to three units: single, double, or triple configurations. Additionally, we also offer a "Nut Plate" that can be used for the installation of this product. 【Features】 ■ Compatible with major pressure gauges ■ Available in various shapes such as straight and L-shaped ■ Can accommodate up to three pressure gauges *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This document is the design material for "V-pulleys." It includes design procedures for selecting the appropriate pulley, examples of belt types and pulley groove shapes. Additionally, it explains the handling of pulleys for belt drives, modifications for shaft holes, installation, and alignment. 【Contents (excerpt)】 ■ Design procedures ■ Selection examples ■ List of formulas ■ For belt drives ■ Safety precautions *For more details, please refer to the PDF document or feel free to contact us.

• Belts and pulleys

This catalog introduces the magnetic materials, parts, magnetic countermeasures, and magnetic component inspection equipment from Techno Plan Co., Ltd., which we handle. It includes "neodymium magnets," "ferrite magnets," "magnet sheets," "simple holders," and "magnetic component inspection equipment." The catalog is rich in images and provides product features, applications, and usage examples, making it a useful reference for product selection. [Featured Products (Excerpt)] ■ Neodymium magnets ■ Ferrite magnets ■ Samarium cobalt magnets ■ Alnico magnets ■ Magnet sheets *For more details, please refer to the PDF document or feel free to contact us.

• magnet
• Rubber
• Other work tools

This catalog introduces the "Cam Followers" and "Roller Followers" from Japan Thomson Co., Ltd., which we handle. These bearings feature a structure that incorporates needle rollers into a thick outer ring, designed for outer ring rotation, with a low coefficient of friction and excellent rotational performance. It includes a comprehensive explanation of each product, dimension tables, special specifications, comparison tables of various manufacturers, and other information, making it a useful reference when selecting products. [Contents (Excerpt)] ■ Cam Follower Series - Explanation - Dimension Table - Related Parts *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings
• shaft

"Altaurus" is a mobile scaffold that achieves both lightness and safety through a hybrid of aluminum and steel. By reducing the weight of components that become a bottleneck during assembly and disassembly, safer and more efficient construction is possible. The intricate connection parts and robust assembly structure result in a strong product. It boasts high rigidity, allowing for long-term and reliable use. [Features] - Achieves weight reduction by using aluminum as the base material - Reduces burden with aluminum materials, shortening construction time - Compact storage space - Adopts the pre-installed handrail system Lifeguard *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Other safety and hygiene products

The "End Effector VEE" is a modular type robot hand that enables configuration in a short time and at a low cost. It allows for the flexible combination of pad types, quantities, and arrangements to construct a hand suitable for various applications. Additionally, we offer a flange base with a vacuum generator, "VEE-QCMV," which can be directly attached to this product. 【Features】 ■ Optimal hand configuration for individual workpieces ■ Labor-saving design and assembly ■ Lightweight structure that enables faster processes ■ Suitable for the packaging, food, and pharmaceutical industries *For more details, please refer to the PDF materials or feel free to contact us.

• Articulated Robot
• Transport and handling robots

We would like to introduce our "Double Piston Air Swing Clamp." Thanks to its long stroke type, it can accommodate clamp points at different heights using the same equipment. Even with a reduced size compared to air swing clamps, it maintains equivalent clamping force. 【Features】 ■ The double piston structure achieves both high output and long stroke ■ Can accommodate clamp points at different heights using the same equipment ■ Realizes space-saving and lightweight design for equipment *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps
• Processing Jig
• Assembly Jig

This catalog introduces the "Cable Bay Clean Series" from Tsubakimoto Chain Co., which we handle. Starting with the "Clean Bay," which is suitable for use in clean rooms, we also feature the unique self-supporting flat cable system "Flat Bay," and the "Cable Bay TKR type," which has been redesigned with a new link structure to achieve low dust generation and low noise. We have included application examples that contribute to creating low-dust environments and reducing the risk of disconnection, along with images, so please take a moment to read through them. [Contents (excerpt)] ■ Application examples ■ Clean Bay ■ Flat Bay *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products
• cable

This catalog introduces the air conditioning blowers from Mitsubishi Electric Corporation that we handle. It features the ceiling-mounted embedded type and supply type of "straight squirrel cage fans," as well as "single inlet squirrel cage fans" and "inclined duct fans." In addition to the common features and dimensional drawings of the products, we have also included variation dimension tables and lists of characteristics and specifications, so please make use of this for your selection. [Featured Products (Excerpt)] ■ Straight Squirrel Cage Fans - Ceiling-mounted embedded type - With 24-hour ventilation function - Supply type - Simultaneous supply and exhaust type *For more details, please refer to the PDF materials or feel free to contact us.

• air conditioning
• Ventilation and Exhaust
• Other air conditioning equipment

The "Rubber Mold Bearing" is a rubber roller that directly bonds polyurethane rubber to the outer diameter of miniature, small-diameter, deep groove ball bearings, incorporating the bearing technology developed by NTN over many years. It uses ether-based polyurethane rubber, which excels in water resistance, wear resistance, cold resistance, heat degradation resistance, ozone resistance, and rubber elasticity. We can manufacture bearings with precision (dimensions, rotation) and sealed grease that differ from standard products according to your specifications. 【Features】 ■ High degree of freedom in bearing specifications ■ Option to select rubber hardness ■ Excellent rubber material ■ Outer diameter runout precision *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings

We would like to introduce our "Compressed Air Purification Filter." It reduces weight by 50% and dimensions by 30% in terms of spacing and depth, and allows for modular connections. Additionally, it monitors clogging status with a clogging switch output. Moreover, thanks to the stopper function that prevents the case from falling, the case will not drop even if all bolts are loosened. 【Features】 ■ Contributes to energy savings by reducing pressure drop ■ Space-saving and reduced labor ■ Quantifies the clogging status of each filter element ■ Improved workability during element replacement ■ Notifies when it's time to replace the element ■ Lightweight *For more details, please refer to the PDF document or feel free to contact us.

• Other filters
• Other environmental equipment

We would like to introduce our 3-screen, 4-channel flow monitor, the 'PFG200 Series'. By displaying the display items and setting values simultaneously, we can achieve visibility of the setting items, and it can manage the cumulative flow of 4 lines with just one unit. There are four variations of applicable flow sensors, including digital flow switches for air and three-color display digital flow switches for water. 【Features】 ■ Visualization of setting items ■ Easy screen switching ■ Simple 3-step setup ■ Reduction of installation space through centralized management ■ Cumulative flow measurement ■ Management of different applications with one monitor *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

We would like to introduce our lifespan-enhancing cylinder, double-acting with a single rod, 'CM2-XB24'. This product offers over four times the durability compared to existing products, achieving a reduction in maintenance frequency. We offer four types of cylinder tube inner diameters: 20, 25, 32, and 40 mm. The operating method is double-acting with a single rod, and the standard stroke ranges from 25 to 300 mm. 【Specifications (partial)】 ■ Type: Pneumatic ■ Fluid used: Air ■ Guaranteed pressure resistance: 1.5 MPa ■ Maximum operating pressure: 1.0 MPa ■ Minimum operating pressure: 0.05 MPa ■ Lubrication: Not required (oil-free) *For more details, please refer to the PDF document or feel free to contact us.

• cylinder

We would like to introduce our "Hydraulic Clamp" with a T-slot automatic slide type that we handle. It is suitable for clamping in hard-to-reach places or on the opposite side of operations, and it is fully automated from the movement of the clamp to the clamping action. We offer five models: "GD0250," "GD0400," "GD0630," "GD1000," and "GD1600." 【Features】 ■ The GA clamp is moved by an air cylinder. ■ Suitable for clamping in hard-to-reach places or on the opposite side of operations. ■ Fully automated from the movement of the clamp to the clamping action. *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps
• Hydraulic Equipment

We would like to introduce the "Ejector Coupler/Central Pullback" that we handle. The "Ejector Coupler" automates the connection between the ejector plate and the ejector rod, reducing setup time. It supplies air to connect and disconnect. The "Central Pullback" automates the connection with the ejector plate, reducing setup time. It is compact with a large floating amount, allowing for smooth connection and disconnection. 【Features】 ■ One-touch solution for connecting the ejector rod ■ Reduced mold change time ■ Shortened takt time ■ Tool-less ■ Reduced setup time ■ Increased productivity *For more details, please refer to the PDF document or feel free to contact us.

• joint
• Other machine elements

The "BE1/BE6H" is a bellows valve suitable for steam applications that does not seize or leak. By eliminating leaks from the gland area, it not only prevents steam loss but also eliminates causes of seizing such as stem rust and excessive tightening. We offer the "BE1," which solves the issues of gland leakage and handle seizing all at once, and the "BE6H," which has a full port and a wide range of sizes to accommodate various applications. 【Features】 ■ Prevents stem corrosion (BE1 only) ■ Prevents gland leakage ■ Excellent durability and reliable sealing *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "FRCA-A/FRCA-B" is a clamp that secures a single shaft, such as a rotating axis. The "FRCA-A," which uses a set screw type, gently clamps the shaft by tightening the set screw, causing the internal wedge to move. The "FRCA-B," which uses a lever type, gently clamps the shaft by tightening the clamp lever, causing the internal wedge to move. 【Features】 ■ Can be used in combination with rotating mechanisms such as control knobs ■ Can be attached to equipment and devices such as plates using the fixing holes ■ The fixing holes are counterbored on both sides, allowing for attachment from either side *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce our "Low Torque Long Life Deep Groove Ball Bearings for Motors." By achieving "lower viscosity of base oil" and "optimization of thickening agents," we reduce mixing resistance. Additionally, improvements in "the heat resistance and base oil retention of thickening agents" and "the heat resistance of base oil" also lead to an increase in bearing lifespan. Please feel free to contact us when you need assistance. 【Features】 ■ Achieves significant reduction in torque and long lifespan ■ Reduces mixing resistance ■ Increases bearing lifespan ■ Contributes to energy savings ■ Contributes to maintenance-free operation *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

This product is a commercial air treatment standalone unit that uses a drip evaporation type humidifying element specifically designed for "commercial standalone humidification unit cassette type," achieving a high humidification capacity of 2.2 kg/h. The temperature and humidity sensor mounted at the intake of the main unit detects the indoor temperature and humidity, automatically switching the humidification operation on and off and adjusting the circulation airflow to maintain the target humidity. Installation of a humidistat and instrumentation work is not required. 【Features】 ■ Achieves a high humidification capacity of 2.2 kg/h ■ Automatically controls the humidification amount by detecting indoor humidity *For more details, please refer to the PDF document or feel free to contact us.

• Air purifiers

We would like to introduce our longevity-enhancing cylinder, the 'CJ2-XB24'. Thanks to new technology, its durability has improved by more than four times. The specifications and external dimensions are the same as those of existing products (Air Cylinder CJ2 Series). It also achieves a reduction in maintenance frequency. Please feel free to contact us when you need assistance. 【Specifications (Excerpt)】 ■ Operating method: Double-acting rod ■ Fluid used: Air ■ Guaranteed pressure resistance: 1MPa ■ Maximum operating pressure: 0.7MPa ■ Minimum operating pressure: 0.12MPa, 0.06MPa ■ Cushion: Rubber cushion *For more details, please refer to the PDF document or feel free to contact us.

• cylinder

We would like to introduce our "Digital Flow Switch for Water." We offer a variety of products, including the "4-Channel Flow Monitor," which can connect up to four flow sensors, and the "PF3W Series," which supports two analog outputs. Please feel free to contact us when you need assistance. 【Product Lineup】 ■ Digital Flow Switch for Water PF3W Series ■ Digital Flow Switch for PVC Piping PF3W Series ■ Digital Flow Monitor for Water PF3W3 Series ■ 4-Channel Flow Monitor PFG200 Series *For more details, please refer to the PDF document or feel free to contact us.

• switch

"TU" is a compact and slim positioning table with a slide table placed inside a U-shaped track rail. By adopting a U-shaped track rail, the rigidity against moments and torsion is significantly improved. It is also possible to use the track rail as a structural component of machines and devices, expanding design flexibility. 【Features】 ■ Adopts a newly conceived U-shaped track rail, resulting in a compact and slim positioning table ■ The slide table has a high-precision, high-rigidity integrated structure ■ A suitable table specification can be selected from a wide range of options *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

This document introduces the "Orthogonal Axis Gears" that we handle. It includes specifications and dimensional drawings for each product, as well as notes on selection, additional processing, and usage precautions. This is a useful reference, so please take a moment to read it. 【Featured Products】 ■ Miter Gear BSM ■ Bevel Gear (20:30) BSS / Bevel Gear (15:30) BSA ■ Bevel Gear (20:40) BSB / Bevel Gear (18:36) BSE ■ Bevel Gear (18:45) BSF / Bevel Gear (15:45) BSC ■ Bevel Gear (15:60) BSD ■ Bevel Gear (20:30) BUS / Bevel Gear (15:30) BUA *For more details, please refer to the PDF document or feel free to contact us.

• Drive system parts

This product is a hydraulic clamp that manually slides the T-slot to lock the mold's U-cut section. It features a basic configuration that employs a GA clamp which slides manually within the T-slot. A three-circuit hydraulic unit is used, allowing for individual control of the hydraulic circuits for the upper mold, lower mold, and RA die lifter. Additionally, the upper and lower molds can be arranged with different clamps. For more details, please contact us separately. 【System Configuration Example】 ■ Upper Mold Clamp: GA Clamp ■ Lower Mold Clamp: GA Clamp ■ Mold Loading and Unloading: MR□ Pre-Roller + RA Die Lifter ■ Hydraulic Source: CP□ Unit / CQ□ Unit *For more details, please refer to the PDF materials or feel free to contact us.

• Vice Clamps

We would like to introduce the "Mini Clamp Lever" that we handle. We offer a variety of products, including the all-stainless steel "LDCMS-W-AS" and the stainless steel threaded "LDCMS-W-CR." In addition, we also handle the flat type "LHCM-W" and the practical clamp lever "LUDMS-W." Please feel free to contact us when you need assistance. 【Product Lineup (Excerpt)】 ■LDCMS-W ■LDCMS-W-AS ■LDCMS-W-CR ■LDCMS-W-NI ■LDCM-W ■LDMS-W-AS *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Cyclone Separator Series" is a product that exhibits high drain separation efficiency. By completely eliminating drains and scale, it can supply high-quality dry steam and dry air, improving productivity and product quality. It features continuous discharge, ensuring there is no delay in drain discharge. Additionally, the seal integrity is guaranteed by a high-precision polished float supported at three points. 【Features】 ■ Built-in high-performance cyclone separator ■ Built-in free float trap (excluding DC7) *For more details, please refer to the PDF materials or feel free to contact us.

• Other water treatment equipment

We would like to introduce the "Sensor Bracket" that we handle. It is compatible with major sensor manufacturers' laser, photoelectric, proximity, fiber optic, and photo-micro sensors. You can select from various sensors (part numbers). In addition to mounting brackets, we also support various sensor installations, including sensor stands that combine shafts and joints. 【Lineup (excerpt)】 ■ Single Plate - Bracket for laser sensors - Bracket for photoelectric sensors - Bracket for fiber optic and proximity sensors - Bracket for photo-micro sensors ■ Sensor Stand *For more details, please refer to the PDF materials or feel free to contact us.

• bracket

The "Tsubaki Sprocket Fit Bore" is a processed product with a shaft hole that can be used immediately upon delivery. The processing details are symbolized, allowing for easy ordering with just the model number. Please select the contents for shaft hole processing, keyway processing, and tapped hole processing. Some varieties also support surface treatment. Additionally, we have pre-processed stock items for specific combinations of processing details. Please feel free to contact us when placing an order. 【Features】 ■ Smart: Accurate confirmation and communication of specifications ■ Smooth: No need for drawing creation or attachment during ordering ■ Speedy: Ready for immediate use upon delivery *For more details, please refer to the PDF document or feel free to contact us.

• Processing Jig

This product is a compact gear motor that achieves predictive maintenance by detecting and monitoring fluctuations in load on machinery through its built-in sensors. By using the integrated temperature sensor to correct power calculations during operation, it enables load monitoring according to actual load, which was difficult with retrofitted sensors. It can accurately detect loads in the range of 20Hz to 120Hz. 【Features】 ■ Compatible with inverter drive ■ Supports motors with brakes and 400V class ■ Accurately detects load fluctuations even at low reduction ratios *For more details, please refer to the PDF document or feel free to contact us.

• Other motors

We would like to introduce the "Pre-Roller" that we handle. We offer a lineup of five types of storage methods, including detachable, detachable and vertically foldable, and horizontally foldable. With this product and the rollers of the die lifter installed in the T-slot (U-slot), you can move molds with light force. 【Storage Methods】 ■ Detachable ■ Detachable and vertically foldable ■ Horizontally foldable ■ Detachable (stand-mounted type) ■ Horizontally foldable (stand-mounted type) *For more details, please refer to the PDF document or feel free to contact us.

• roller

This product features a V-shaped groove seal surface on the inner ring, which effectively works against dust on the outer side of the V-groove due to centrifugal force, while preventing grease leakage on the inner side. The shield plate is made of a special steel plate that is resistant to rust and has undergone a robust surface treatment, providing excellent sealing capability. As a result, there are no issues related to rust, which positively impacts the bearing's lifespan and acoustic levels. 【Features】 ■ Outstanding performance with the groove seal surface (all types) ■ Rust-resistant shield plate (ZZ) ■ Double lip seal (LLU) that automatically compensates for gaps *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

We would like to introduce the "2-Port Solenoid Valve" that we handle. Since the coil can rotate 360°, handling the lead wires is easy. Additionally, the resin stopper reduces metallic noise and improves lifespan. We offer a variety of products, including the direct-acting "JSX Series" and the high flow/energy-saving type "JSX□□U Series." 【Features】 ■ Space-saving ■ Energy-efficient ■ Lead wires can be extracted at 360° ■ Stopper structure ■ Improved corrosion resistance of the iron core ■ Protection structure IP67 *For more details, please refer to the PDF document or feel free to contact us.

• valve

This catalog introduces YUSHIN's "Disc Brake," which we handle. It provides detailed explanations using diagrams and tables regarding usage and safety precautions, usage examples, and calculation formulas for selection. This is a useful reference, so please make sure to utilize it when selecting products. 【Contents (Excerpt)】 ■ What is a Disc Brake ■ Points to Note for Use ■ Safety Precautions ■ Examples of Disc Brake Usage ■ Technical Data, Terminology, Lifespan, Correction Factors ■ Characteristics of Electromagnetic Clutches and Brakes, SI Unit Conversion Table *For more details, please refer to the PDF document or feel free to contact us.

• brake

This catalog introduces the "control panels, alarm panels, and operation panels" that we handle. We offer a variety of products, including fire hydrant pump control panels, alarm panels, and electrode switch panels. In addition, we have a wide range of other products listed, so please take a moment to read through it. 【Featured Products (Excerpt)】 ■ Pump Control Panel (GP) ■ Pump Control Panel (G2) ■ Pump Control Panel (G4) ■ Pump Control Panel (F3) ■ Fire Hydrant Pump Control Panel ■ Star-Delta Starter Panel *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel

This product is a high-precision positioning pin with hydraulic control that expands and contracts in diameter. It has good compatibility with clamps and similar devices, making jig design easy. It can also be used with shallow workpiece holes due to its low-profile design. Additionally, it allows for origin setting and pitch accuracy measurement at the concentric part of the flange's upper surface. 【Features】 ■ Compact body for easy placement ■ Easy inspection of mounting position accuracy ■ Usable with shallow workpiece holes *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This catalog introduces shaft brackets that are suitable for mounting and securing components around the shaft. For round shafts and square shafts, we offer normal types, types with four holes, types with two screw holes, and types with flanges. They are convenient for sensor installation during machine assembly, modifications, and maintenance. 【Contents (partial)】 ■ For round shafts - Normal type - Type with four holes - Type with two screw holes - Type with flange *For more details, please refer to the PDF document or feel free to contact us.

• bracket