東栄 List of Products and Services

- High-temperature environment compatibility Operable even at an ambient temperature of 45°C. - Stainless steel shell heat exchanger Adopts a stainless steel shell heat exchanger that matches the oil-free era of clean air and compressed air. *Please inquire separately for degreasing treatment. *Custom SUS pipes are available to improve corrosion resistance. - Standard equipped with suction filter A filter is standardly equipped at the suction inlet of the condenser, making maintenance easier.

• Dehumidifier

- Control the coolant liquid temperature within ±0.5℃ of the set temperature, contributing to improved machining accuracy. - Energy-saving operation with DC motor and inverter control, reducing coolant liquid evaporation loss by half. - Suppression of bacterial growth, reduction of decay and odor, and improvement of the working environment. - Easy installation even with a shallow tank due to the circulation system. - Energy-saving and high-precision control achieved with DC inverter control. - Structure allows for easy disassembly and cleaning of the cooler.

• Chiller

- High-precision liquid temperature control chiller that meets low-temperature needs - Energy-saving with DC inverter control - One package with built-in liquid tank and pump - Easy operation with touch panel - Equivalent to IPX4 - Standard equipped with bypass valve - Equipped with TESC - Quiet operation - HFC refrigerant

• Chiller

- Extensive liquid temperature control is possible. Liquid temperature can be set arbitrarily within the range of 15 to 30℃. - Standard external communication function equipped. Temperature control is possible via RS232C and RS422. (Only for RKE22000A-VW)

• Chiller

- Compressor inverter control - Built-in pump A pump is built in to supply water to the customer's equipment (closed circuit). - External signal terminals Equipped with operation signal terminals, alarm signal terminals, and remote control terminals. - Equivalent to IPX4 Can be installed outdoors. Consideration is required for direct sunlight, strong winds (over 8 m/s), snowfall, and freezing. IPX4 refers to a grade regarding water intrusion, meaning "it will not be adversely affected by splashes of water from any direction at a rate of approximately 10 L/min." - Remote control compatible (optional) All operations that can be performed by this unit can be remotely controlled with the installation of a remote control (optional).

• Chiller

- Temperature control of ±2.0℃ is possible with ON/OFF control of the freezer. It is suitable for any scene. - Standard equipped with a high-pressure pump. - Simple safety design and controller with comprehensive features. - Large-capacity tank with a wide water supply inlet. - Easy filter cleaning.

• Chiller

- Achieves over 30% energy savings and high precision control with a temperature control accuracy of ±0.1℃ through compressor rotation control (compared to our conventional models). - Balances the conflicting technologies of energy savings and high precision. - Allows for up to 65% energy savings. - Realizes high precision control of ±0.1℃* (*when load and ambient temperature are stable). - Achieves a wide range. - The operation plate is angled to improve operability and visibility. - The water tank is positioned at the top, making water supply and checking/cleaning the water quality inside the tank very easy. - The dust filter for the condenser can also be easily attached and detached with one touch (air-cooled only).

• Chiller

■High-efficiency operation ■Installable in harsh environments ■Reduction of environmental impact ■Space-saving installation possible ■Equipped with TESC for high precision and energy saving ■Standard energy-saving operation mode ■Equipped with an intelligent touch panel ■Low operating noise design

• Chiller

【Chiller equipped with TESC】 The power consumption ratio changes with the variation in load rate. The RKE2200C-V, equipped with TESC, can further reduce power consumption compared to conventional models. 【Enables wall-mounted installation and space-saving setup】 Compared to conventional models, the product installation area has been reduced by 36%. Additionally, it allows for intake and exhaust, piping, and wiring connections from the sides, enabling wall-mounted installation. 【Significantly reduces environmental impact by adopting refrigerant R32】 Contributes to achieving carbon neutrality. When compared to conventional models filled with R410A, it can reduce CO² emissions (equivalent value) by approximately 70%.

• Chiller

■A thick, wide fabric that can be placed over with ease ■Covers the fire source to block air and extinguish the flames ■A bright red storage case that is easily noticeable in emergencies ■The back of the storage case has a hook hole for wall mounting ■The thickness of the storage case is about 4cm, making it space-efficient ■Can be instantly retrieved by pulling the black tag belt ■When in use, it is possible to safely cover the fire source by holding the black belt ■Can also be used as a fire shield to protect the body in emergencies ■Provides peace of mind as it can be taken out and checked in advance ■Available in three fabric sizes: 1.2×1.2m, 1.2×1.8m, and 1.8×1.8m ■Made from non-combustible silica fiber and Zetex heat-resistant fiber ■Not recommended for extinguishing frying oil (risk of pot overturning)

• Other safety and hygiene products

- Adoption of newly developed processing tank - Easily meets the oil wastewater discharge standard of 5 mg/L set by the Water Pollution Control Law - Achieves a standard treated water oil concentration of 3 mg/L or less - Capable of complying with additional discharge standards set by prefectures (1 mg/L is a special specification) - No power supply required as it is pressurized by the discharge pressure of Orion's drain trap (Electromagnetic type: ADE450, Disc type: AD-5) - The pressurized drain is depressurized by an orifice and passes through the chamber tank → pre-treatment tank → main treatment tank, where oil is adsorbed and separated from the wastewater (DPS37 only has the main treatment tank) - The clarity of the treated water can be checked through the window on the front of the main unit - Treated water can also be sampled from the inspection valve - The processing tank containing the adsorbent has minimal water dripping and can be easily replaced in a short time - There is a cold climate specification that automatically prevents drain freezing (single-phase AC 200V) - Outdoor installation is possible with the use of a rain cover (optional item)

• Oil-water separator

GREENCO is characterized by significantly reduced costs due to the economies of scale from its annual sales of 250,000 units. In addition to cost advantages, the key component of the product, the bearings, are made in Japan. The use of aluminum die-casting for the impeller and casing achieves high strength and durability while keeping the weight low. It supports various applications and replacements from different manufacturers with high pressure, large airflow, and a wide range of variations.

• Vacuum pump

- No battery required; the heating element reacts with oxygen in the air to generate heat. - It is a self-heating type that physically heats rather than just maintaining warmth (approximately 38-40°C). - Heats up in about 10-20 minutes and maintains heat for a maximum of 8-10 hours. - Available in various sizes, from those that cover the body to those for infant protection. - Multiple heating elements are arranged on a non-woven fabric sheet. - Sealed in a protective poly bag that does not allow air or water to pass through. - The flat and lightweight packaging makes it easy to store and carry. - Can be used as a substitute for blankets before and after surgery, and to prevent body temperature drop during emergency transport. - Used as a preventive measure against hypothermia during disaster relief and rescue operations. - Prepared for emergencies in evacuation centers, first aid stations, and mountain lodges. - Bulk purchases are available for local governments, fire and emergency equipment companies, medical retailers, sports shops, etc. - Sizes and other specifications can be selected according to purpose and use. 【Note】 - This product may not generate heat if opened in an environment below 0°C. If using below 0°C, please open it in an environment above 0°C and confirm that it generates heat before use. - This product is manufactured to meet heating conditions even in low-temperature environments, so the achieved temperature and time may vary depending on the usage environment (variation range: up to approximately 50°C).

• others

Gamma-ray sterilized, DNase, RNase, and pyrogen-free, compliant with USP Class VI. While maintaining high quality, it helps reduce research costs in biotechnology and pharmaceuticals due to its competitive pricing. With excellent sealing and gas barrier properties, it is the ideal bottle for storing and distributing media, serum, active pharmaceutical ingredients, intermediates, buffers, and various reagents that require strict pH management. ■ Excellent sealing and gas barrier properties. ■ Manufactured using strict raw materials in a clean room (ISO Class 8). ■ Made from virgin resin that does not contain animal-derived components. ■ DNase, RNase, and pyrogen-free, non-cytotoxic, and non-mutagenic. ■ Sterilized, eliminating the need for cleaning and depyrogenation processes. ■ Recommended for single use (disposable). ■ Available in 10 sizes, with round shapes for 5ml to 20ml and square shapes for 30ml to 2000ml. ■ The 30ml to 2000ml sizes come with graduations and are square-shaped to save storage space. ■ The neck portion of the 30ml to 2000ml sizes is shrink-wrapped to prevent contamination. ■ Ideal for sampling, storing, and transporting media, serum, active pharmaceutical ingredients, intermediates, buffers, and various reagents.

• Plastic utensils and containers

■Warmth one class above, with a heat output of 20kW and a perceived warmth of 24kW ■Efficient heating with vertical panels and a circulator ■Two-stage power adjustment ■Eco timer function that switches to low after 30 minutes ■Adjustable angle of the heat radiation panel ■Compact design, installation space of 50cm x 61cm ■Easy to move with casters ■Heat output: High 19.4kW / Low 15.1kW (two-stage combustion) ■Heating capacity: Wooden structure 25 tsubo / Concrete 35 tsubo ■Operating noise (50/60Hz): 64/64dB ■Tank capacity: 22L

• others

■Inflate with air for use, adjustable grip strength based on air volume ■Strengthen grip by squeezing one side and sending air to the opposite side ■Lightweight and air-filled, making it easy to hold without burden ■Train at optimal intensity based on air volume and squeezing speed ■Ideal for maintaining grip strength in the elderly and for injury rehabilitation ■Effective for children's coordination training ■Compatible with commercially available simple air pumps (inlet diameter: 5.5mm) ■Deflate for compact storage and easy transport ■Available in two sizes: 14cm and 16cm in diameter (when deflated) ■Perfect for elderly care facilities and rehabilitation centers

• others

- No battery required; the heating element reacts with oxygen in the air to generate heat. - It is a self-heating type that physically heats (38-40°C) rather than just retaining heat. - Heats up in about 10-20 minutes and maintains heat for a maximum of 8-10 hours. - Available in three sizes, from one that covers the body to one that covers the upper body. - Multiple heating elements are arranged on a single sheet. - Sealed in a protective bag that does not allow air or water to pass through. - The flat packaging allows for easy storage and portability without taking up much space. - Used as a preventive measure against hypothermia during disaster relief and rescue operations. - Can be used as a substitute for blankets before and after surgery, and to prevent body temperature drop during emergency transport. - Provides peace of mind for preparations in evacuation shelters, mountain lodges, ships, and for dealing with snowbound situations. - Bulk purchases are available for local governments, fire and emergency equipment companies, transportation-related companies, medical supply retailers, and sports shops. - Has a track record of use in military medicine in the United States. - Not reusable, non-sterile. 【Note】 - If this product is opened in an environment below 0°C, it may not generate heat. If using in an environment below 0°C, please open it in an environment above 0°C and confirm heat generation before use. - This product is manufactured to meet heating conditions even in low-temperature environments, so the achieved temperature and time may vary depending on the usage environment. (Variation range: up to about 50°C)

• others

In response to the global semiconductor shortage and with government support, the development of semiconductor manufacturing bases in the country is progressing, leading to an increased demand for fluoropolymer products that have extremely low leaching of impurities, such as storage containers for ultra-pure water used for wafer cleaning and high-purity acids used for trace impurity measurement. Sabilex's PFA products are manufactured from high-purity virgin PFA resin and include various PFA containers that safely and rigorously store high-purity chemicals without leaching impurities, as well as PFA vials used for storing ICP-MS sample solutions and for preparation and dissolution tasks. Additionally, there are acid purification devices that purify hydrochloric acid, nitric acid, and hydrofluoric acid to 10 ppt grade by automatically and quietly distilling them from 1 ppb grade without boiling, all of which are proven PFA products in the semiconductor field.

• Other semiconductor manufacturing equipment

The Sabillex PFA vial clock dish is inert to almost all chemical solutions and minimizes the risk of trace metal leaching, thereby promoting high purity in reflux and decomposition processes on hot plates and similar equipment. Since there is no need to shift the dish for ventilation during heating, the risk of capturing dust from the air is low, and the knob is molded to allow opening and closing without touching unnecessary areas.

• Plastic utensils and containers

SABIREX's PFA forensic vials are made from high-purity PFA resin and are the ideal vials for the stable long-term storage of DNA. The National Institute of Standards and Technology (NIST) in the United States uses these PFA vials for the storage and transportation of DNA. Due to the absence of concerns regarding impurity leaching, many DNA samples stored in these PFA vials for over six years show little to no degradation, and samples stored in PFA vials under harsh temperature conditions have been preserved for detectable periods of six months. (No certificate of results is issued.) With extremely excellent liquid release properties, it is possible to recover samples from the vials without any loss.

• Plastic utensils and containers

■ A total of 16 pins rotate to loosen the compacted soil within the artificial turf. ■ Can be used in areas without electricity since it is powered by an engine. ■ Breaks down compacted soil on artificial turf tee grounds at golf courses. ■ Removes natural grass and weeds that have infiltrated the artificial turf. ■ The loosened soil can be collected with a Turf Keeper (separate machine). ■ Reduces strain on the lower back as it can be operated while standing. ■ The handle can be adjusted to fit the operator's body size. ■ Equipped with a high-quality Honda engine. ■ Leasing options are also available.

• others

The BZ450 blower/air launcher is a compact and lightweight engine-powered blower that utilizes a uniquely developed 3D fan to deliver airflow equivalent to a 45cc class. In addition to reducing the body weight to 6.4 kg, it features a special anti-vibration structure that minimizes vibrations, and it is equipped with a soft cushion in the back area, allowing for minimal strain on the body and comfortable operation even for extended periods. It can be easily used by women without difficulty, making it suitable for sports facilities like golf courses and soccer fields, accommodation facilities such as hotels and inns, schoolyards, and shopping centers. It effectively collects leaves without breaking them, enabling a reduction in cleaning time and increased efficiency. - Achieves powerful airflow and wind speed with a uniquely developed 3D fan - Significantly reduces vibrations with a special anti-vibration structure - Lightweight at 6.2 kg, making long hours of work easier - Shoulder strap design allows for minimal strain and free use of hands - Equipped with a cushion in the back for improved carrying comfort - Comes standard with a detachable flat nozzle - Allows for low and high-speed switching of engine RPM according to the task - Includes a cruise (fixed) lever to optionally lock the RPM.

• others

The Furon-less chiller HEU series is an energy-saving cooling device that does not use refrigerants or compressors. It is not subject to the refrigerant emission regulations, so there are no inspection obligations under the refrigerant emission suppression law or recovery obligations upon disposal. It is effective as a cooling device that reuses cooling water that is constantly circulated within the factory. It also contributes to the reduction of CO2 emissions and running costs.

• Chiller

The Hertz-free dryer is a tough air dryer that boasts one of the largest processing air volumes in the industry, capable of handling the same air volume at 50 and 60 Hz, and is designed to operate in hot surrounding environments. It can accommodate ambient temperatures from 2°C to 50°C and intake temperatures from 5°C to 80°C, allowing it to operate without triggering high-pressure cuts even in harsh temperature conditions. Additionally, compared to the conventional high-temperature intake compatible model RAX-J-SE, the processing air volume has increased by 11-23% (at 60 Hz), making it one of the largest in the industry. It also supports increased airflow from compressors, accommodating air compressors ranging from 22 kW to 75 kW, reducing the need to select a higher class model. Since it maintains the same processing air volume at both 50 and 60 Hz, model selection is straightforward, and it can also support domestic factory relocations. In addition to the normal mode, it features an energy-saving mode, contributing to carbon neutrality.

• Other painting machines

The non-fluorocarbon inverter chiller RKE1500C-VRA adopts the new refrigerant HFO-1234yf, reducing environmental impact and user burden. HFO-1234yf is not subject to inspection obligations or recovery obligations upon disposal under the Fluorocarbon Emission Control Law, allowing for significant reductions in management and disposal costs that were burdensome with conventional fluorocarbon refrigerants. Additionally, the ozone depletion potential (ODP) is zero, and the global warming potential (GWP) is less than 1, significantly reduced compared to conventional R32 and R410A, making it environmentally friendly. (As of June 2022) In terms of energy efficiency, the inverter controls the rotation speeds of the compressor, fan, and pump for refrigeration, enabling operation with the minimum necessary power. This contributes to reductions in CO2 emissions and running costs by decreasing power consumption in response to changes in load rates. *There is also the RKE-C-VRB series that uses refrigerant R513A.

• Chiller

At Toei, we are currently offering a "Reagent Bottle and Bottle Catalog for Research, Industry, and Packaging" that comprehensively covers various types of bottles, including standard bottles, large bottles, cleaning bottles, centrifuge bottles, glass bottles, and packaging bottles. The bottles featured in the catalog are used for a wide range of applications, including samples for research and analysis, various chemical solutions used in production processes, wastewater and environmental analysis samples, and packaging for chemical sales. The catalog includes various types of bottles such as narrow mouth, wide mouth, round, square, with active stoppers, and brown bottles. If you would like a quote or have any inquiries, please consult with our company or your sales representative.

• Plastic utensils and containers
• Other laboratory equipment and containers

The Free Cooling Module Chiller/Eco Hybrid FCMC55A is an energy-saving chiller that integrates a fan cooler for natural cooling and a modular chiller. By utilizing the temperature difference between the return water temperature to the chiller and the outside air temperature, the fan cooler enables natural cooling, which suppresses the operation of the DC inverter chiller. When natural cooling is insufficient, appropriate chiller operation is performed depending on the situation. Particularly in winter, when the temperature difference between the outside air temperature and the return water temperature increases, it is possible to significantly reduce power consumption. Additionally, with the modular controller (sold separately and required), backup operation can automatically start if a malfunction occurs in some modules, and operation can be controlled based on the load, allowing for operation with a variable number of units. Rotation operation can also be implemented to equalize the operating hours of each module, contributing to the overall longevity of the system.

• Chiller

Air conditioners in offices and similar spaces generally do not have ventilation functions because they operate on a circulation system that recirculates indoor air. During the COVID-19 pandemic, it is necessary to regularly open windows for ventilation. As a result, during ventilation, the inflow of outside air can be uncomfortable, and it also places a greater load on the air conditioning system. Fresh Eco Change is a ventilation air conditioning unit that allows for comfortable ventilation while remaining sealed. When expelling indoor air, it stores heat in a sensible heat exchanger, and conversely, when drawing in outside air, it absorbs that stored heat, enabling comfortable ventilation while minimizing indoor heat loss. Essentially, the exhaust and intake do not come into direct contact within the unit, ensuring that viruses and odors do not return indoors, providing peace of mind. There are also models equipped with medium-performance filters that are effective against pollen. Fresh Eco Change is a ventilation air conditioning unit designed for comfortable ventilation even in a sealed state, looking ahead to the post-COVID era.

• others

The "Cold Carry" is a portable water-cooled cooling suit system that connects the chiller unit, hose, and cooling suit with a single touch. Since the cooling water continuously circulates through the cooling suit, it effectively cools the body without being affected by the outside temperature, even in places without air conditioning. *Cooling suit sold separately 【Usage Examples】 ◆ Heatstroke prevention during work in places without air conditioning ◆ Heatstroke prevention during work involving heat-emitting materials ◆ Protective clothing can be worn over the cooling suit *Demo units are available for loan. For more details, please contact us or download the PDF for more information.

• Other laboratory equipment and containers
• Other safety and hygiene products
• others

If the cooking room and refrigerator are connected in the ceiling space, warm, humid air from the cooking room can come into contact with the cold ceiling area, fixtures, and wiring on the refrigerator side, leading to condensation. Additionally, if condensation in the ceiling space is left unattended, the ceiling may absorb the fallen condensation, resulting in stains or mold on the ceiling. The ceiling-mounted dehumidifier/RFB500G-T is a dehumidifier that is suspended and fixed in the ceiling space, removing moisture that causes condensation, mold, unpleasant odors, stains, and rust. Despite its lightweight and compact design of 34 kg, it boasts one of the industry's top dehumidification capacities. Furthermore, it allows for ON/OFF operation of the dehumidification process via remote control. The ceiling-mounted dehumidifier/RFB500G-T addresses moisture issues in the ceiling space.

• air conditioning

The Cold Carry is a cooling suit chiller system designed for heatstroke prevention, allowing for one-touch connection of the chiller unit, hose, and cooling suit. It ensures that cooling water continuously circulates within the cooling suit, effectively cooling the body without being affected by the outside temperature, even in places without air conditioning. The chiller unit comes with a telescopic handle and casters, making it easy to move to the work area and improving work efficiency. With a hose length of 3 meters, it offers a wide working range and can be used anywhere with a single-phase 100V power supply. It features a touch panel for three levels of temperature adjustment. Being made in Japan, it also assures quality. (Cooling suit sold separately)

• Other safety and hygiene products

■ Sixteen pins rotate to loosen the compacted soil within the artificial turf. ■ Can be used in areas without electricity due to its engine-powered unit. ■ For artificial turf around baseball field bases. ■ For artificial turf tee grounds at golf courses. ■ The loosened soil can be collected with a turf keeper (separate machine). ■ Reduces strain on the back as it can be operated while standing. ■ The handle can be adjusted to fit the operator's body size. ■ Equipped with a high-quality Honda engine. ■ Leasing options are also available.

• others

The electromagnetic automatic drain trap/ADE450 series is a new type of electromagnetic trap that enhances reliability, ease of use, and energy efficiency. It includes an energy-saving model with a float sensor-type drain detection unit and a standard model that allows for the setting of discharge intervals and discharge times. In the energy-saving model, when drain accumulates in the detection unit, a signal is sent to the main unit via the action of the float switch, causing the direct-acting valve to open and discharge the drain. Conversely, when the water level drops, it automatically stops, reducing air loss. Both the energy-saving and standard models feature a large-diameter orifice (φ5mm) in the valve section, making them resistant to sludge and less prone to clogging. Additionally, they adopt a simple independent direct-acting valve, which enhances reliability. They are also equipped with an alarm output function for drain discharge failure.

• Wastewater/wastewater treatment equipment

The SLK series magnetic pumps are seal-less pumps that enable prolonged dry running by suppressing the sliding heat generated during dry operation. Since the sliding heat does not increase, there is no concern about failures due to thermal shock, and they also exhibit excellent durability. The pump casing and impeller structure have been redesigned, significantly improving pump efficiency. This expands the performance range as a medium flow pump, making it easier to select the appropriate model. Additionally, improved workability allows for a reduction in maintenance costs. *Note: These pumps cannot be used for transferring liquids containing slurry.

• Other pumps

The seal-less SLK series pump is a magnetic pump that enables long periods of dry running by suppressing the sliding heat generated during dry operation. Since the sliding heat does not increase, there is no concern about failures due to thermal shock, and it also boasts excellent durability. The pump casing and impeller structure have been redesigned, significantly improving pump efficiency. It expands the performance range as a mid-flow pump, making it easier to select the appropriate model. Additionally, with improved workability, it is also possible to reduce maintenance costs. *Note: It cannot be used for transferring liquids containing slurries.

• Other pumps

The Fresh Eco Cube/AEC series is an outdoor air processing air conditioning unit designed to solve ventilation issues in enclosed spaces such as factories and offices during the COVID-19 pandemic. Typically, air conditioners in factories and offices operate in a recirculation mode, which offers little to no ventilation function. Additionally, during the summer, high-temperature and high-humidity outdoor air can enter, making it difficult for the air conditioner to dehumidify adequately, leading to discomfort and condensation. The Fresh Eco Cube reduces the load on indoor air conditioners by dehumidifying and cooling the outdoor air before introducing it indoors, achieving both energy savings and comfort while simultaneously addressing ventilation issues. Furthermore, by taking in outdoor air, the indoor space is maintained at positive pressure, making it harder for dust and viruses from adjacent rooms or corridors to enter. - Introduces outdoor air into enclosed spaces such as factories and offices - Dehumidifies and cools outdoor air before bringing it indoors - Solves ventilation issues in enclosed spaces without the need to open windows by allowing existing indoor air conditioners to regulate the outdoor air processed by the Fresh Eco Cube - Stabilizes indoor temperature and humidity, reducing condensation, as the incoming outdoor air is treated - Reduces the load on existing indoor air conditioners, allowing for smaller electrical capacity - Maintains positive pressure indoors, effectively preventing the intrusion of dust and viruses from adjacent rooms and hallways.

• others

The Shellab SMO5-M forced circulation oven maintains the sterilization method that preserves the filter function of N95 masks, as announced by the National Institutes of Health, through a stable temperature distribution achieved by forced circulation (70°C for 60 minutes dry heat cycle). (Reuse guideline: 2 times / according to the same institute) ■ Even heating with stable temperature distribution ■ Quick heating with fast startup ■ Slide shelves that reduce contact frequency during retrieval ■ Shelves can be adjusted in height in 0.5-inch (12.7mm) increments ■ Processing guideline: approximately 60 N95 masks per cycle*1 ■ Wide heating temperature range with excellent responsive PID temperature control ■ Chamber and shelves made of stainless steel for easy disinfection ■ Equipped with a digital timer on the control panel ■ Can use single-phase power supply*2 ■ Manufactured in an ISO9001 certified production facility (Made in the USA) ■ Usable not only for sterilization purposes but also as a regular oven *1: Up to 64 masks. Varies depending on conditions from mask manufacturers, etc. *2: Please use the included dedicated power plug.

• Heating device

■ The rotating brush stands up the fibers of the artificial turf. ■ Can be used in places without electricity because it is powered by an engine. ■ After maintenance, the fibers stand up, improving cushioning. ■ Regular maintenance extends the lifespan of the artificial turf. ■ Standing up the fibers during installation allows for even filling of the infill material. ■ Can be operated while standing, reducing strain on the back. ■ The handle can be folded, making transportation by car easy. ■ High-quality Japanese product. ■ Leasing options are also available. * The effectiveness is limited with degraded artificial turf.

• others

■ Areas that require concrete curing can be constructed at a reduced cost. ■ Can be connected by anyone without special tools. ■ Each side has four connection points, ensuring no vertical or horizontal displacement. ■ Once connected, the unique connection structure (U.S. patent) makes it difficult to detach. ■ A flat connection with no steps to trip over. ■ Approximately 70 cm square size for easy assembly and maintaining a flat surface. ■ Panels can be added, disassembled, and reused afterward. ■ Unique honeycomb structure on the back of the panel absorbs impact and load (U.S. patent). ■ Grip processing on the front side of the panel prevents slipping. ■ Drainage holes at regular intervals drain rainwater beneath the panels. ■ Rainwater that falls on the back of the panel disperses horizontally. ■ Can be installed indoors or outdoors, allowing for wide area setups. ■ Stable shape allows for space-saving storage when stacked. ■ Environmentally friendly, made of 100% recycled resin, and proudly made in the USA. ■ Usable for various sports such as basketball and futsal. ■ Available in three colors (light brown, light green, gray). ■ Various optional parts are available, including components for enhancing appearance and barrier-free ramps.

• others
• mat

■Can be installed in soil areas that are cured with concrete ■Can be installed indoors and outdoors, and wide area setups are possible ■Water is drained under the panel through evenly spaced drainage holes ■Can be cleaned by flowing water with a hose, ensuring cleanliness ■Even when wet, it has a slip-resistant finish for safety ■Can be connected by anyone without special tools ■Each side has four connection points, ensuring no shifting up, down, or sideways ■Once connected, it has a unique connection structure that is difficult to detach (U.S. patent) ■Flat connections without steps to prevent tripping ■Easy to assemble with a size of approximately 70cm square, ensuring a flat surface ■Expansion, disassembly, and subsequent reuse of panels are possible ■Stable shape that can be stacked for space-saving storage ■Available in three colors (light brown, light green, gray) ■Various optional items available, such as ramps for barrier-free access

• others
• mat

■ Areas that require curing with concrete can be constructed at a reduced cost. ■ Can be connected by anyone without special tools. ■ Each side has four connection points that prevent shifting up, down, left, and right. ■ Once connected, it has a unique connection structure that is difficult to detach (U.S. patent). ■ A flat connection with no steps to trip over. ■ Approximately 70 cm square size that is easy to assemble and ensures a flat surface. ■ Panels can be added, disassembled, and reused afterward. ■ Unique honeycomb structure on the back of the panel absorbs impact and load (U.S. patent). ■ Grip processing on the front side of the panel prevents slipping. ■ Drainage holes at regular intervals drain rainwater beneath the panel. ■ Rainwater that falls on the back of the panel disperses horizontally. ■ Can be installed indoors and outdoors, allowing for the setup of wide areas. ■ Stable shape that can be stacked for space-saving storage. ■ Environmentally friendly, made of 100% recycled resin, and proudly made in the USA. ■ Usable for various applications from business to personal use. ■ Available in three colors (light brown, light green, gray). ■ Various optional items are available, including parts to enhance appearance and barrier-free ramps.

• others
• mat

Tarsons produces high-quality research plastic labware made from pure virgin plastic resin without the use of any additives or plasticizers. In addition to reagent bottles and large bottles used for storing various chemicals and research media, the product range includes wash bottles, pipette tips, centrifuge tubes, cryopreservation products, and racks, with many items made from USP Class VI compliant medical-grade resin. Disposable products such as pipette tips and centrifuge tubes are produced in an automated cleanroom environment and are used in fields such as molecular microbiology, cell culture, genome research, proteomics, and immunology.

• Plastic utensils and containers
• Other laboratory equipment and containers

■Common maximum heat resistance temperature: 370℃, maximum heat resistance temperature: 540℃. ■Uses very thin, continuous amorphous silica threads. ■A woven tube made of threads bundled from 6-micron thin fibers. ■Manufactured from inorganic materials, no hazardous gases are generated. ■Used for heat insulation of pipes and thermal protection of cables and wires. ■Tube wall thickness: 0.16mm, 0.32mm. ■Tape inner diameter: various sizes starting from a minimum of 13mm (varies with thickness). ■Sold in roll units (length of the roll varies with thickness and inner diameter). ■Non-asbestos product.

• fiber

■Maximum radiation heat resistance: 1650℃ (contact heat resistance: 175℃). ■An inexpensive radiation heat-resistant tape made by laminating an aluminum layer to Zetex heat-resistant fiber. ■Not suitable for applications that involve re-rolling the tape (risk of aluminum delamination). ■Used for thermal protection of pipes and other objects. ■Manufactured from inorganic materials, no hazardous gases are generated. ■It is not adhesive; a separate heat-resistant adhesive is required. ■Tape thickness: 0.89mm, tape width: 5.1cm. ■Sold in roll units (approximately 15m (50 feet) roll). ■Non-asbestos product.

• fiber

■Common maximum heat resistance: 815℃, maximum heat resistance temperature: 1095℃. ■Uses high-temperature resistant fibers treated with special vermiculite processing. ■Plain woven fiber made from thin threads bundled together, each 6 microns in diameter. ■Manufactured from inorganic materials, no hazardous gases are generated. ■Tape thickness: 1.47mm, 2.90mm, 5.00mm. ■Tape width: various from a minimum of 2.5cm (maximum width varies depending on tape thickness). ■Sold in roll units (approximately 30m (100 feet) rolls, some are approximately 15m rolls). ■Non-asbestos product. ■No adhesive properties.

• fiber