フロロテクノロジー List of Products and Services

The high hardness and high adhesion fluorine coating agent for metals, "FluoroSurf FG-5093 Series," forms a transparent fluororesin film on metal surfaces, effectively repelling water and oil while demonstrating excellent dirt resistance. The film is transparent and thin, so it does not alter the texture of the material. Additionally, it has high adhesion and wear resistance, ensuring long-lasting effectiveness. Application is simple; just wipe with a cloth or sponge soaked in the coating liquid. It finishes easily without uneven application. It is non-flammable, low toxicity, and low odor, making it safe to use on-site. We are currently offering product samples for free! 【Features】 ■ Reduced dirt adhesion ■ Reduced fingerprint adhesion ■ Release treatment ■ Low friction ■ Non-flammable liquid *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents fail to work. It has outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication using a brush or spray can restore its performance. 【Case Study in Thin CFRP Molding】 1. Background Introduction In the thin molding of carbon fiber, such as separators for fuel cells, conventional release agents caused cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1,000 shots became possible, leading to the decision for mass production. Additionally, there is no transfer to the molded products, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

【Issue】 - Currently, mold release occurs after 5-10 minutes of continuous operation. We would like to extend this to approximately 60 minutes if possible. 【Solution Example】 By applying 'FloroSurf FG-5093' to the nozzle, continuous molding for 120 minutes becomes possible! FloroSurf FG-5093 is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

"FloroSurf FG-5097" is a release agent specifically developed for polyurethane foam molding. It solves the surface roughness commonly associated with fluorine-based release agents in polyurethane molded products! Just one application provides a non-stick surface to the mold. The adhesion of the molded resin to the mold is reduced, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. 【Features】 ■ It strongly adheres to the mold material, enabling continuous release. ■ It can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for outsourcing processing. ■ Reapplication is also easy. ■ Low odor and non-flammable. It helps maintain a good working environment and is not subject to fire safety regulations or occupational safety and health laws. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. After application, a non-stick property is imparted to the mold surface within 5 minutes of air drying at room temperature. The adhesion of the molded resin to the mold is reduced, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, with a 10-minute air drying time at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce flash. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous according to the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (Occupational Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Fluorine-based coatings exhibit outstanding resistance to lithium battery electrolyte compared to other resin coatings. They can prevent fires caused by circuit short circuits when the electrolyte leaks and corrosion of metal parts. There are proven applications as safety measures in various fields such as aircraft, automotive circuit boards, and mobile devices. 【Challenges Addressed by FluoroSurf】 - No short circuits occur even if lithium battery electrolyte leaks and adheres to the circuit board patterns. - Can be easily applied with dispensers and dries quickly at room temperature, eliminating the need for a drying process. - Non-hazardous materials with no regulations under fire safety laws. - Not classified as organic solvents under the Industrial Safety and Health Act. Additionally, it is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coatings for mounted circuit boards. It provides protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency in a thin film. *Free samples are available for those who request them (limited to corporate clients). Please indicate "Sample Request" in your inquiry. *We sincerely apologize, but as our products are industrial chemical products, we cannot provide samples for medical or food-contact applications.

• Coating Agent

The "Anti-Contamination and Fingerprint Prevention Coating Agent FluoroSurf FG-5000 Series" is a coating agent that forms a non-stick surface with anti-contamination properties. It can be easily applied, dries at room temperature, and makes it difficult for not only tape and adhesives but also fingerprints and grease stains to adhere, while also allowing for easy removal. 【Features】 ■ Tape, adhesives, fingerprints, and dirt are less likely to adhere. ■ It is a high-adhesion coating film that chemically bonds to various materials such as glass and metal at room temperature, ensuring long-lasting functionality. ■ The coefficient of dynamic friction on the surface is low, providing a dry lubricated surface. ■ It is a transparent thin film, so it does not compromise the appearance of the material. ■ Application is easy, and a film is formed simply by drying at room temperature. ◎ Samples are available upon request. Please note that our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

• Coating Agent

The conformal coating agent for automotive circuit boards, "FloroSurf," is resistant to gasoline and is suitable for waterproofing and insulation protection of automotive electronic components, as well as for moisture-proof waterproof coatings to prevent ion migration on mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, and water and oil repellency with a thin film. 【Features】 ■ It is a non-flammable, low-odor liquid, making it safe to use! → FloroSurf is non-flammable and low in toxicity, thus exempt from PRTR law and fire service law regulations. It is also not classified as an organic solvent under the Industrial Safety and Health Act. ■ It has higher moisture and waterproofing properties compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings. ■ It is resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ We offer two types: FS-1610, which emphasizes gasoline resistance, and FG-3650, which focuses on protective performance, allowing for various choices to meet your needs. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The protective coating agent for electronic substrates, "Fluorosurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → Fluorosurf FG-3650 is non-flammable and low in toxicity, ensuring safety. It is not subject to PRTR law or fire service law regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces the management items for environmental measurement and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment such as heating furnaces is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The "Fluoro Surf FG-5093/5095 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce streaking. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The high hardness and high adhesion fluorine coating agent for metals, 'FloroSurf FS-1900 Series', forms a transparent fluororesin film on metal surfaces that strongly repels water and oil with high adhesion and hardness. The film is transparent and thin, so it does not change the texture of the material. Additionally, it has high adhesion and wear resistance, ensuring long-lasting effectiveness. Application is simple; just wipe with a cloth or sponge soaked in the coating liquid. It finishes easily without uneven application. It is non-flammable, low toxicity, and low odor, making it safe for use at the application site. We are currently offering product samples for free! 【Features】 ■ High water and oil repellency ■ Reduced dirt adhesion ■ Reduced fingerprint adhesion ■ Release treatment ■ Low friction ■ Non-flammable liquid *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons for choosing FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The fluorine coating agent (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on printed circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. PFAS regulated substances are not used. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → FloroSurf FG-3650 is non-flammable and low in toxicity, ensuring safety. It is not subject to PRTR law or fire service law regulations. No explosion-proof equipment is required, and quantity management is not necessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces management items such as environmental measurements and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment such as heating furnaces is required. ☆ Currently providing samples and a moisture-proof coating handbook exclusively for corporate clients.

• Coating Agent

The high hardness and high adhesion fluorine coating agent for metals, "FluoroSurf FG-5093 Series," forms a transparent fluororesin film with high adhesion and high hardness on metal surfaces at room temperature, effectively repelling water and oil, and demonstrating excellent dirt resistance. The film is transparent and thin, so it does not alter the texture of the material. Additionally, it has high adhesion and wear resistance, ensuring long-lasting effectiveness. Application is simple; just wipe with a cloth or sponge soaked in the coating liquid. There are no uneven coatings, and it finishes easily, with a dirt-repellent film forming within a few minutes of drying at room temperature. It is non-flammable, low toxicity, and low odor, making it safe for use at the application site. We are currently offering product samples for free! 【Features】 ■ Reduced dirt adhesion ■ Reduced fingerprint adhesion ■ Release treatment ■ Low friction ■ Non-flammable liquid *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Fluorine coating agents exhibit outstanding resistance to lithium battery electrolyte compared to other resin coating agents. They can prevent fires caused by circuit short-circuits when the electrolyte leaks, as well as corrosion of metal parts. They provide protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency in a thin film. They have a proven track record of being adopted as safety measures in various fields, including aircraft, automotive circuit boards, and mobile devices. **Challenges Addressed by Fluorine Coating** - No short-circuit occurs even if lithium battery electrolyte leaks and adheres to the pattern part of the circuit board. - Can be easily applied with dispensers and dries within a few minutes at room temperature. No drying process is required. - Non-hazardous materials with no fire safety regulations. No quantity management or explosion-proof measures are necessary. - Not classified as organic solvents under the Industrial Safety and Health Act. Regular organic health checks are not required. *We offer free samples to those who request them (limited to corporate clients). Please indicate "Sample Request" in your inquiry. *We sincerely apologize, but as our products are industrial chemical products, we cannot provide samples for medical or food-related applications.

• Coating Agent

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating allows for the imparting of functionalities such as anti-fouling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine component rises to the surface of the hard coating, exhibiting its functions, and during UV irradiation, it co-polymerizes with the components of the hard coating to become integrated. By integrating, this product's functionality possesses abrasion resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. Additionally, it does not contain any PFAS regulated substances. With just one application, the adhesion of the surface molding resin is reduced, demonstrating excellent continuous release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other molds

Fluorine-based super hydrophobic coatings allow water droplets to roll off at several angles, making them ideal for protecting printed circuit boards! 1. For printed circuit boards, moisture is the greatest enemy. They can repel liquids such as condensation, rain that intrudes from outside the equipment enclosure, and electrolyte leaked from batteries, providing strong protection for the circuit board. 2. Printed circuit boards are installed inside equipment enclosures, so they are not exposed to the aforementioned super hydrophobic issues. 3. Fluorine-based coating films have high moisture resistance and insulation properties, as well as resistance to acids and lithium battery electrolytes. Even if the super hydrophobic structure is compromised, the protective performance for the circuit board does not diminish. 4. Furthermore, FluoroSurf is non-flammable and legally classified as not being an organic solvent. Its high safety allows for a significant reduction in management items related to hazardous materials under fire safety laws and organic solvents under occupational safety and health laws. This also minimizes capital investment. 5. Drying is completed at room temperature in 5 minutes. No heating process is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the die of extrusion molding can also reduce haze. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Release agent for nanoimprint molds, Fluorosurf NL series By applying it to molds for nanoimprinting, a fluorinated compound (perfluoropolyether) is chemically bonded to the mold surface with a layer thickness of about 10 nm, achieving strong adhesion. This enables continuous release, significantly improving the productivity (throughput) of nanoimprint molding. Application can be easily done using methods such as spraying, and it dries at room temperature in 5-10 minutes. It is non-flammable and low-odor, making it safe. Reapplication is also easy. We offer two types: NL-1 for optical nanoimprinting NL-2 for thermal nanoimprinting *Free sample liquid available! (Please cover only the shipping cost = shipped cash on delivery) Feel free to request it.

• Other polymer materials

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. Fluorosurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

When applying FluoroSurf FG-5093 to blades such as Thomson blades, scissors, utility knives, and other cutting tools, adhesive materials like glue and tape do not stick during cutting, significantly improving work efficiency. Moreover, this performance is durable, allowing it to maintain its effectiveness over a long period. Additionally, the coating film is transparent and approximately 10 nanometers thick, which does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine allows for easy removal of dirt. ■ The transparent thin film has minimal impact on appearance. ■ Can be easily applied in our own factory production sites and only requires room temperature drying. ■ When the effect diminishes, simply reapply for easy performance recovery. ■ Non-flammable and safe, with low odor. ■ Does not use any regulated PFAS substances such as PFOS, PFOA, or PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

When FluoroSurf FG-5093 is applied to metal, it imparts non-stick properties to the surface. Non-stick means that tape, adhesives, and other contaminants are less likely to stick and are easier to remove. When applied to cutting tools such as scissors, utility knives, and blades, it prevents adhesive materials from sticking to the scissors during the cutting of adhesive tape or medical bandages, significantly improving work efficiency. Additionally, this performance is durable, allowing it to maintain its effectiveness over a long period. Moreover, the coating film is an ultra-thin film of about 10 nanometers, so it does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The fluorine effect allows for easy removal of dirt ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and air dries at room temperature ■ Durability of over one year ■ When effectiveness diminishes, reapplication is simple for performance recovery Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

The high hardness + high adhesion fluorine coating agent for metals, 'FloroSurf FG-5093 Series', forms a transparent fluororesin film with high adhesion and high hardness on metal surfaces at room temperature, effectively repelling water and oil and demonstrating excellent dirt resistance. The film is transparent and thin, so it does not alter the texture of the material. Additionally, it has high adhesion and wear resistance, ensuring long-lasting effectiveness. Application is simple; just wipe with a cloth or sponge soaked in the coating liquid. There are no uneven coatings, and it finishes easily, with a dirt-repellent film forming within a few minutes of room temperature drying. It is non-flammable, low toxicity, and low odor, making it safe to use on-site. We are currently offering product samples for free! 【Features】 ■ Reduced dirt adhesion ■ Reduced fingerprint adhesion ■ Release treatment ■ Low friction ■ Non-flammable liquid *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The fluorine coating agent (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on printed circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. PFAS-regulated substances are not used. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire service law regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces management items such as environmental measurements and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board during electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ☆ Currently providing samples and a moisture-proof coating handbook exclusively for corporate clients.

• Coating Agent

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous according to the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (Occupational Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The water- and oil-repellent treatment agent "Fluorosurf" exhibits water- and oil-repellent properties through the fluororesin film formed on the surface, effectively repelling water and oil. It offers various benefits such as preventing the rise of oils and fats, diffusion prevention, adhesion prevention, and dirt resistance. Free samples are available upon request. Please note that we do not use PFAS regulated substances (such as PFOS and PFOA). 【Features】 ◯ A special fluororesin is dissolved in non-flammable fluorinated solvents or organic solvents to create a solution. ◯ Easy coating with brushes or immersion. It dries at room temperature in 5 seconds to 15 minutes. ◯ After drying, a fluororesin film is formed, providing not only water and oil repellency but also dirt resistance, water repellency, and moisture resistance. ◯ In models with fluorescent dye, the coated areas can be confirmed by fluorescence under black light. 【Effective for the following applications!】 ■ Preventing flux rise on lead wires ■ Preventing oil leakage from miniature motors and spindle motors ■ Stopping the flow of sealing resin in capacitors ■ Preventing diffusion and intrusion of silicone oil ■ Preventing lubricant leakage from the rotating axis of wristwatches *If you would like a free sample, please include "Sample Request" in your inquiry.

• paint

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane-based, acrylic-based, and silicone-based coatings, it offers 3 to 10 times better moisture resistance (at the same film thickness). It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ It can be used safely as it is a non-flammable, low-odor liquid! → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Curing at room temperature takes only 5-20 minutes after application → No special equipment like heating furnaces is needed. ■ It has low viscosity, making it easy to handle. The workplace remains clean. ■ The pot life is semi-permanent, resulting in zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

• Coating Agent

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed to protect printed circuit boards from acidic substances (such as hydrogen sulfide gas and lithium battery electrolyte). It provides strong protection for metals against acidic gases and liquids with a thin film, ensuring long-term protection for printed circuit boards. 【Reasons for choosing FG-3650】 ■ High protective performance ■ Non-hazardous under the Fire Service Act, so explosion-proof equipment and quantity management are not required ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), so environmental measurements and organic solvent health checks for workers are not necessary, making on-site management easier ■ Dries at room temperature in a short time, no drying equipment required ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, ensuring that molded products remain clean and do not require washing. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. 【Benefits in the Manufacturing Environment】 ■ It can be safely used as it is a non-flammable, low-odor liquid! → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ It has low viscosity, making it easy to handle. The workplace remains clean. ■ The pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

• Coating Agent

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons for choosing FG-3650】 ■ High migration prevention performance ■ Non-hazardous material according to the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (Occupational Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, eliminating the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Fluorine-based super water-repellent coatings allow water droplets to roll off at several angles, making them ideal for protecting printed circuit boards! 1. For printed circuit boards, moisture is the greatest enemy. They can repel liquids such as condensation, rain that intrudes from the outside of the equipment housing, and electrolyte leaked from batteries, thereby providing strong protection for the circuit board. 2. Printed circuit boards are installed inside the equipment housing, so they are not exposed to the environments that cause the aforementioned super water-repellent issues. 3. Fluorine-based coating films have high moisture resistance, insulation performance, and also resistance to acids and lithium battery electrolytes. Even if the super water-repellent structure is compromised, the protective performance for the circuit board does not diminish. 4. Furthermore, FluoroSurf is non-flammable and legally classified as not being an organic solvent. Its high safety allows for a significant reduction in management items related to hazardous materials under fire prevention laws and organic solvents under safety and health laws. This also minimizes capital investment. 5. Drying is completed in 5 minutes at room temperature, and no heating process is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

"FloroSurf FG-5090" is a fluorine-based release agent for molds. It can be easily applied and demonstrates improved release properties even in cases where it is difficult to release from fluororesin-coated molds. Fluororesin-coated molds are challenging to coat with oil-based or silicone-based release agents, but FloroSurf FG-5090 spreads uniformly on the fluororesin surface and exhibits excellent release properties. 【Features】 ■ Strongly adheres to mold materials, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ Can be easily applied with brushes or spray guns, and the application is completed in 10-15 minutes of air drying at room temperature. Outsourcing of processing is not required. ■ Low odor and non-flammable, maintaining a good environment on-site. ■ Does not contain regulated substances such as PFOS, PFOA, or PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, preventing contamination of molded products and eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to perform. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modification ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer coatings and silicone release agents. When conventional release agents fail to release ⇒ We solve the problem with outstanding release performance. When you want to improve continuous release properties ⇒ Continuous release properties will be enhanced. "FloroSurf" features nano-level release components that bond tightly to the mold surface ⇒ It provides strong release and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins, elastomers, and fragile thin-walled products. ~ We are offering free samples exclusively for businesses! ~ Please select "Request Sample" via the [Contact Button] below.

• Other molds

The protective coating agent for electronic substrates, "FloroSurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating (conformal coating) of mounted substrates. ▼ Excellent performance of FloroSurf FG-3650 Series High moisture and waterproof properties / Resistance to lithium battery electrolyte / Acid resistance and resistance to oxidizing gases High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ~ We are offering free samples exclusively for corporate clients! ~ Please select "Request Sample" from the [Contact Button] below.

• Coating Agent

The additive "FloroSurf FS-702X Series" from Floro Technology Co., Ltd. for UV hard coat agents can be added in small amounts to UV-curable acrylic hard coat agents to impart functionalities such as anti-fouling, low refractive index, slip properties, and water and oil repellency. It is suitable for surface modification of various plastic films, including plastic touch panels. 【Features】 - Effective with an addition amount of 1-3% - Low oil and grease sliding angle, demonstrating excellent fingerprint removal properties - Three types available based on compatibility with hard coat agents ～ Free samples are available exclusively for corporate clients! ～ Please indicate "Sample Request" using the [Contact Button] below.

• Other optical parts

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and not classified as an organic solvent, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness). It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → No need for management items such as workplace environmental measurements or organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *Please contact us if you would like a free sample.

• Coating Agent

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane-based, acrylic-based, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for insulating protection and waterproofing of electronic components and mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone-based insulating coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational safety and health law. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

• Coating Agent

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer processing and silicone release agents. When conventional release agents fail to provide release or you want to improve continuous release properties, this is where it shines. "FloroSurf" bonds tightly to the mold surface with a nanometer-level ultra-thin film, imparting strong non-stick and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins and elastomers, and fragile thin materials. ～ We are offering free samples exclusively for corporate clients! ～ Please indicate "Sample Request" when you contact us using the button below.

• Other molds

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application grants a non-stick property to the mold surface. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with brushes or spray guns, with a drying time of 10 minutes at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce haze. Free samples are available for trial (limited to corporations)! Feel free to request.

• Coating Agent

"Fluoro Surf FG-5093 Series" Numerous achievements with blades such as Thomson blades and scissors! After applying with a brush or spray and wiping, a non-stick property is imparted to the surface of the metal blade after leaving it at room temperature for 10 minutes, making it difficult for adhesives and tapes to adhere. The fluororesin, at a film thickness at the nanometer level, reacts and adheres tightly to the surface, providing excellent durability. When performance degrades, reapplication will restore the performance. It can be easily processed in-house, allowing for significant cost reductions compared to traditional fluororesin processing. 【Features】 ■ Reacts with blade materials for strong adhesion, allowing for continuous use. ■ The film thickness is only a few nanometers, which does not negatively affect the sharpness of the blade. ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ Not classified as an organic solvent. Low odor and non-flammable. Maintains a good working environment, and management items required by fire safety and occupational health laws (quantity management, organic inspections, environmental measurement reports) are not necessary. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent