フロロテクノロジー Product Lineup

Conformal Coating (Protective Coating for Electronic Circuit Boards) "FloroSurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture and waterproof coating of mounted circuit boards. It is non-flammable and does not contain any regulated substances such as those under the Fire Service Act, Industrial Safety and Health Act, VOC regulations, or PFAS regulations, as it is free from organic solvents (VOC). 【Performance Features】 - Compared to other resin coatings, it offers high moisture and waterproof properties, contributing to weight reduction. → It provides four times the moisture resistance of urethane or acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the circuit board in case of electrolyte leakage, preventing fire accidents. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. - It demonstrates strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. - It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. - A model with fluorescent dye for application verification is also available. *If you would like a free sample, please contact us.

• Coating Agent

Conformal Coating (Protective Coating for Electronic Circuit Boards) "Fluorosurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not contain organic solvents (VOC), making it free from fire safety laws, occupational safety and health laws, and VOC regulations. Furthermore, our products do not use PFOS or PFOA at all. 【Performance Features】 ■ High resistance to acidic substances such as the electrolyte of lithium batteries → Protects the circuit board in case of electrolyte leakage, preventing fire accidents. ■ Higher moisture-proof and waterproof properties compared to other resins → Provides four times the moisture-proof performance compared to urethane or acrylic moisture-proof coatings at the same film thickness! Exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ Exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

• Coating Agent

The protective coating agent for electronic circuit boards (conformal coating) "Fluorosurf FG-3650 series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating. It has numerous achievements in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations. Additionally, it does not contain any PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has four times the moisture-proof performance! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Since it does not contain low molecular compounds, it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, leak prevention, and moisture-proof and waterproof coatings for mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety law restrictions. Additionally, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It has four times the moisture resistance performance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimal, making it ideal for lightweight mobile devices. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in case of electrolyte leakage, preventing fire accidents. - It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. - It does not contain low molecular compounds like silicone, which can cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• Coating Agent

Conformal Coating (Protective Coating Agent for Electronic Circuit Boards) "FloroSurf FG-3650 Series" is ideal for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards and leak prevention for narrow pitch patterns. It is non-flammable and does not contain organic solvents (VOC), making it free from fire safety laws, occupational safety and health laws, and VOC regulations. Additionally, PFOS and PFOA are not used at all. 【Performance Features】 ■ High resistance to acidic substances such as the electrolyte of lithium batteries → Can protect the circuit board during electrolyte leakage, preventing fire accidents. ■ Superior moisture-proof and waterproof properties compared to other resins → Provides four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings at the same film thickness! Exhibits over ten times the moisture-proof performance compared to silicone-based coatings. Minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ Does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. ■ A model with fluorescent dye for application verification is also available. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not contain VOC organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Furthermore, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It has 4 times the moisture resistance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in the event of electrolyte leakage, preventing fire accidents. - It also exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, providing rust prevention effects. - It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating. It has a proven track record in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted circuit boards. It is non-flammable and not classified as an organic solvent, thus free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Additionally, it does not contain any PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → It offers four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances like lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ It does not contain low molecular compounds, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating! It has numerous achievements in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted substrates. It is non-flammable and not classified as an organic solvent, thus free from regulations under fire safety laws and occupational safety and health laws. Additionally, it does not use any PFAS regulated substances such as PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has four times the moisture-proof performance! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The weight increase due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in the event of electrolyte leakage, preventing fire accidents. ■ It demonstrates strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ It does not contain low molecular compounds, so it will not cause contact failure of electrical contacts after application.

• Coating Agent

"FloroSurf" is a fluorine coating agent that can protect metals from hydrogen sulfide and prevent discoloration. A transparent fluorine film is formed at room temperature simply by applying it. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under fire safety and occupational health and safety laws. Additionally, our products do not contain any PFOS or PFOA. 【Performance Features】 It exhibits protective functions such as thin film resistance to hydrogen sulfide, moisture, saltwater, water, acids, lithium battery electrolyte, and water and oil repellency! ■ It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, as well as rust prevention. ■ It is insulating and can also be used to protect electronic circuit boards. ■ It has high resistance to lithium battery electrolytes. → It can protect circuit boards in the event of electrolyte leakage, preventing fire accidents. ■ It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

"FloroSurf FG-5090" is a coating agent that improves release properties by applying it to molds treated with fluororesin. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * It can be applied to molds treated with fluororesin and can be easily applied on the molding site using brushes or spray guns. * Just one application provides a non-stick surface to the mold, demonstrating excellent release properties even for complex and precise shapes. * There is no transfer or accumulation of dirt on the mold or workpiece. * It is non-flammable and does not fall under organic solvent regulations, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

When you apply FluoroSurf FG-5093 to cutting tools such as Thomson blades, scissors, utility knives, and push-cut blades, these adhesives do not stick during cutting, significantly improving work efficiency. Moreover, this performance is durable, allowing it to maintain its effectiveness over a long period. Additionally, the coating film is transparent and extremely thin, about 10 nanometers, which does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine makes it difficult for adhesives and tapes to stick. ■ Transparent thin film (at the nanometer level) has minimal impact on appearance. ■ Can be easily applied in our own factory production sites and only requires room temperature drying. ■ When the effect diminishes, simple reapplication restores performance easily. ■ Non-flammable and safe, with low odor. ■ Completely free of regulated PFAS substances such as PFOS, PFOA, and PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

"FluoroSurf" features a fluororesin coating that forms at room temperature, exhibiting water and oil repellency, preventing the rise (diffusion) of grease and flux during soldering, preventing fingerprint adhesion, and offering various benefits such as dirt resistance, lubrication, and release properties. We provide free samples for testing (shipping charges are to be paid on delivery). [Features] - A special fluororesin is dissolved in non-flammable fluorinated solvents or organic solvents to create a solution. - Easy coating with brushes or immersion. Dries in 5 to 15 minutes at room temperature. - After drying, a transparent, thin film of fluororesin is formed, demonstrating effectiveness in dirt resistance, water repellency, and moisture resistance. - No regulated substances such as PFOS, PFOA, or PFHxS are used. [Effective for the following applications!] - Preventing flux rise during soldering - Waterproof and moisture-proof protective coating for printed circuit boards - Coating resistant to lithium electrolyte - Preventing fingerprint adhesion on displays and lenses - Preventing oil leakage from miniature motors and spindle motor bearings - Stopping the flow of sealing resin *If you would like a free sample, please include "Sample Request" in your inquiry.

• paint

The "Fluoro Surf FG-509X" is a surface treatment agent that allows for fluorine processing on the surface by applying it to resin-molded molds, enabling continuous release. It can be easily applied on-site using a brush, spray gun, or wiping. After application, it dries at room temperature in just 2 minutes. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * This surface treatment bonds to the mold surface, creating a durable release film that allows for continuous release. * It can also be applied to molds that have been conventionally fluorinated, further improving release properties. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * It is non-flammable and does not contain organic solvents, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. A water-based model "FG-505W" is also available as a VOC countermeasure model. * There is no need to remove the residual film during reapplication; you can simply apply another layer. * It has good gas release properties, reduces gas staining, and improves flow. * If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

Our water-soluble release agent solves issues such as poor release performance through its overwhelming continuous release capability. Additionally, it contributes to improved productivity by minimizing cloudiness of the workpiece during the molding of transparent resins such as polycarbonate. Furthermore, the thickness of the release agent film is at the nanometer level, allowing for faithful reproduction of the mold's surface precision. Being water-based, it does not generate VOCs and poses no fire hazards, making it easy to manage and environmentally friendly. Moreover, although it is a fluorine-based release agent, it does not contain regulated substances such as PFOA, PFOS, or PFHxS. 【Application Scenarios】 - Molding of transparent components such as lens parts - Molding of interior parts like dashboards, door trims, and console boxes - Molding of complex-shaped parts or parts with high design aesthetics - Compatibility with various resin materials such as urethane, ABS, and PP 【Benefits of Implementation】 - Improved yield due to reduced release failures and workpiece cloudiness - Reduced frequency of mold maintenance - Cost reduction through increased productivity - Stable supply of high-quality interior parts

• Coating Agent

In the automotive industry, mass production of high-quality parts is required. Particularly for parts with complex shapes and designs, issues with mold release can significantly reduce production efficiency. Mold release problems can lead to damage to parts and defects in appearance, potentially resulting in increased costs. Our water-soluble release agent addresses these challenges with its overwhelming continuous release properties. 【Application Scenarios】 - Molding of interior parts such as dashboards, door trims, and console boxes - Molding of parts with complex shapes or high design quality - Compatibility with various resin materials such as urethane, ABS resin, and PP resin 【Benefits of Implementation】 - Improved yield through reduced mold release issues - Decreased frequency of mold maintenance - Cost reduction through increased productivity - Stable supply of high-quality interior parts

• Coating Agent

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily performed on the molding site using brushes or spray guns. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, faithfully reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * There is no cloudiness when molding transparent resins. * By applying it to the die of extrusion molding, it can also reduce defects like splay and sharkskin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for controls specified by fire and safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

In the automotive industry, mass production of high-quality parts is required. Particularly for parts with complex shapes and designs, defects in mold release during the forming process are a significant factor that reduces production efficiency. Mold release defects can lead to damage to parts and aesthetic issues, potentially resulting in increased costs. Our water-soluble release agent addresses these challenges with its overwhelming continuous release capability. 【Application Scenarios】 - Forming of interior parts such as dashboards, door trims, and console boxes - Forming of parts with complex shapes or high design aesthetics - Compatibility with various resin materials such as urethane, ABS resin, and PP resin 【Benefits of Implementation】 - Improved yield due to reduced mold release defects - Reduced frequency of mold maintenance - Cost savings through increased productivity - Stable supply of high-quality interior parts

• Coating Agent

In the electronic components industry, precision molding requires the faithful reproduction of intricate mold shapes to efficiently produce high-quality products. Particularly in the molding of complex shapes and fine parts, the quality of release properties significantly affects production efficiency and product quality. Traditional release agents have led to issues such as poor release, transfer problems, and increased cleaning efforts, which can decrease productivity. Our water-soluble release agent addresses these challenges and contributes to improved productivity. 【Application Scenarios】 - Precision molding molds - Nanoimprinting - Extrusion molding (mouthpieces) 【Benefits of Implementation】 - Improved continuous release properties - Enhanced quality of molded products - Reduction in cleaning processes - Improved working environment

• Coating Agent

In the rubber molding industry, there is a demand for both product quality and productivity. Particularly in complex shapes and precision products, molding defects can occur due to release agent issues, potentially leading to reduced yield. Additionally, transfer of the release agent and adhesion to molds not only compromises product quality but also increases cleaning processes. Our water-soluble release agent addresses these challenges and supports the balance between productivity and quality. 【Usage Scenarios】 - Release of rubber molded products - Application to molds - Extrusion molding 【Benefits of Implementation】 - Improved continuous release properties - Reduction of molding defects - Decrease in cleaning processes - VOC-free, reducing environmental impact

• Coating Agent

The "Fluoro Surf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using brushes or spray guns. * The release component reacts and bonds to the surface of the mold, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * When the release performance decreases, reapplication will restore its effectiveness. * By applying it to the die of extrusion molding, it can also reduce defects like orange peel and shark skin. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the need for compliance with fire safety and occupational health regulations. * If you would like a free sample, please indicate "Sample Request" in your inquiry.

• Coating Agent

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using a brush or spray gun. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * Applying it to the nozzle of extrusion molds can also reduce blushing. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The fluorine coating agent "Fluorosurf" forms a transparent fluororesin film at room temperature, providing various benefits such as acid protection, water and oil repellency, prevention of grease migration (diffusion), fingerprint adhesion prevention, dirt resistance, lubrication, and release properties. 【Effective for the following applications!】 ■ Prevention of metal sulfide and oxidation ■ Protection of metals and resins from acids generated in fuel cells and lithium batteries. ■ Rust prevention for metals around batteries ■ Coating resistant to lithium electrolyte ■ Prevention of fingerprint adhesion on displays and lenses ■ Prevention of oil leakage from miniature motors and spindle motor bearings ■ Stopping the flow of sealing resins ■ Insulating and moisture-proof coating for electrical circuits ■ Prevention of leaks in electrical circuits ■ Release agent for molds used in resin and elastomer molding 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorine-based solvent to create a solution. ◯ Easy coating by brush or immersion. It dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a transparent thin film of fluororesin is formed, exhibiting properties such as dirt resistance, water repellency, and moisture resistance. 〇 PFAS regulated substances PFOS, PFOA, and PFHxS are not used at all. *If you would like a free sample, please include "Sample Request" in your inquiry.

• paint

フッ素コート剤「フロロサーフ」は、常温で形成されるフッ素樹脂皮膜が、撥水撥油、油脂類のはいあがり（拡散）防止・指紋付着防止・防汚：潤滑・離型など、さまざまなメリットを発揮します。 【特長】 〇PFAS規制物質　（PFOA PFOS PFHｘSなど）は不使用です。 ◯特殊なフッ素樹脂を不燃性のフッ素系溶剤に溶解し溶液化。 ◯刷毛や浸漬などで簡単コーティング。室温で5秒～15分で乾燥します。 ◯乾燥後は透明で薄膜のフッ素樹脂皮膜が形成され、防汚、撥水、防湿等の効力を発揮。 【こんな用途に効果を発揮！】 ■金属の硫化や酸化防止 ■耐リチウム電解液コーティング ■樹脂やエラストマー成型の金型離型剤 ■ディスプレイやレンズの指紋付着防止 ■ミニチュアモーター・スピンドルモーターの軸受け油流出防止 ■封止樹脂流れ止め ■電気回路の絶縁防湿コーティングリーク防止 ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。 ※なお、弊社製品は工業用化学製品のため個人用途（法人格のない場合）、医療用途、食品に触れる用途につきましては、サンプル提供をいたしかねます。

• paint

The fluorine coating agent "FluoroSurf," which is a water and oil repellent treatment agent, exhibits water and oil repellency through the fluororesin film formed on the surface, effectively repelling water and oil. It offers various benefits such as preventing the rise of grease, diffusion prevention, adhesion prevention, and dirt resistance. 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorine-based solvent or organic solvent to create a solution. ◯ Easy coating with a brush or immersion. Dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a fluororesin film is formed, exhibiting effects such as dirt resistance, water repellency, and moisture resistance. ◯ PFAS regulated substances are not used. 【Effective for the following applications!】 ■ Water and oil repellent treatment for shoes and clothing = waterproof spray concentrate… ■ Prevention of oil leakage from miniature motors and spindle motor bearings ■ Waterproof and moisture-proof protective coating for printed circuit boards ■ Coating for printed circuit boards resistant to lithium electrolyte ■ Fingerprint adhesion prevention for displays and lenses ■ Resin flow stop for capacitor sealing ■ Reduction of reflected light in optical components ■ Binder for dry lubricants *Free samples are currently available. *If you would like a free sample, please include "Sample Request" in your inquiry.

• paint

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating can impart functionalities such as anti-soiling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine component rises to the surface of the hard coating and exhibits its functions, and during UV irradiation, it co-polymerizes with the components of the hard coating to become integrated. By integrating, this product's functionality possesses abrasion resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

FluoroSurf FG-5095W is a water-soluble fluorine-based release agent. It is ideal for VOC countermeasures and does not use any regulated PFAS substances such as PFOA, PFOS, or PFHxS. When applied with a brush or spray to molds for resin molding elastomers and dried at room temperature for about 10 minutes, the release component reacts and adheres to the mold surface, demonstrating excellent release properties. ◎ The durability of the release effect is outstanding, allowing for continuous release. ◎ The film is at the nanometer level, enabling accurate reproduction even for complex and precise surface shapes. It can also be used for nanoimprinting. ◎ There is minimal contamination of the mold, significantly reducing cleaning efforts. ◎ There is no transfer to the molded products, eliminating the need for a cleaning process. ◎ There is no clouding of the workpiece during transparent resin molding.

• Other polymer materials

FloroSurf FG-5095W is a water-based fluorine release agent. It is ideal for VOC countermeasures and does not use any regulated substances such as PFOA, PFOS, or PFHxS. When applied to elastomer molds for resin molding using a brush or spray and allowed to dry at room temperature for about 10 minutes, it reduces the adhesion of the molding resin on the surface, demonstrating excellent release properties. The release component reacts and adheres to the mold surface, providing sustained release effects and enabling continuous release. It is particularly effective in situations where conventional release agents struggle to perform. The coating is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes, resulting in less mold contamination and significantly reducing cleaning efforts.

• Other polymer materials

The "Fluoro Surf FG-509X Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. When applied to the mold with a brush or spray and dried at room temperature for about 10 minutes, it reduces the adhesion of the surface molding resin, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents fail to work properly. The film is at the nanometer level, allowing for precise reproduction even on complex and intricate surface shapes. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. Furthermore, regulated substances such as PFOS, PFOA, and PFHxS are not used. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, making cleaning of molded products unnecessary ■ Low odor and non-flammable, maintaining a good working environment and easy management.

• Coating Agent

The "FloroSurf FG-509X Series" is a release agent that forms a dry fluorine film on the surface of molds. By simply applying it with a spray gun in our manufacturing facility and allowing it to air dry at room temperature, a dry, non-stick surface is imparted to the mold. There is no need to outsource processing to specialized contractors. The film is extremely thin, allowing for excellent continuous release properties even for complex and precise shapes. Additionally, the release agent components do not transfer, so cleaning of the molded products is unnecessary. Please try it in cases where conventional release agents do not work well during CFRP molding. Furthermore, our products do not contain regulated substances such as PFOS or PFOA. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ Film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with a brush or spray gun, with air drying in just 10 minutes at room temperature. No need for external processing ■ No removal of the film is required during reapplication ■ Low odor and non-flammable. Not classified as an organic solvent, significantly reducing legal management items Applying it to the nozzle of extrusion molds can also reduce haze. *If you would like a free sample, please contact us.

• Coating Agent

"FloroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Outstanding release properties even with difficult carbon fiber (CFRP)! Please try it when conventional release agents fail. PFAS regulatory substances are not used. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ Application is completed in just 10 minutes at room temperature. No external processing like baked fluororesin is required. ■ There is no accumulation of dirt on the mold, and no transfer of release agent components to the workpiece, eliminating the need for cleaning processes. ■ No cracking occurs during the release of carbon fiber sheets. ■ There is no cloudiness in the workpiece even with transparent resin molding. ■ It is non-flammable, thus not classified as hazardous under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ No removal of the film is necessary during mold reworking. ■ It is effective in reducing melt fracture and sharkskin in extrusion molding.

• Other molds

"FluoroSurf" and "Mold Free" provide excellent non-stick release performance to metal surfaces when applied. Outstanding release properties even with difficult epoxy resins! Please try it when conventional release agents fail. PFAS regulatory substances are not used. 【Features】 ■ The fluoropolymer film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is just a few nanometers, faithfully reproducing surface shapes at the nano and submicron level. ■ Application is completed in just 10 minutes at room temperature. No external processing like baked fluoropolymer is required. ■ There is no accumulation of dirt on the mold, and no transfer of release agent components to the workpiece, eliminating the need for cleaning processes. ■ No cloudiness occurs during transparent resin molding. ■ Non-flammable, thus not classified as hazardous materials under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ No removal of the film is required during mold reworking. ■ It is effective in reducing defects like "melting" and "sharkskin" in extrusion molding.

• Other molds

"FluoroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Outstanding release properties even with difficult recycled plastics! Please try it when conventional release agents fail. PFAS-regulated substances are not used. 【Features】 ■ The fluoropolymer film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ FluoroSurf can be applied with brushes or spray guns, while Mold Free can be applied directly from an aerosol can. The application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, nor transfer to the workpiece, eliminating the need for cleaning processes. (Excluding Mold Free MF-02S) ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable, thus not classified as a hazardous material under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

• Other molds

"FluoroSurf" and "Mold-Free" provide excellent non-stick release properties to metal surfaces when applied. PFAS regulated substances (such as PFOS, PFOA) are not used. Please try it when conventional release agents do not work. 【Features】 ■ The fluoropolymer film reacts with the mold material to adhere strongly, enabling continuous release even when conventional release agents fail. ■ With a film thickness of just a few nanometers, it can faithfully reproduce surface shapes at the nano and sub-micron level. ■ FluoroSurf can be easily applied with brushes or spray guns, while Mold-Free can be applied with an aerosol. Application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, and no transfer of components to the workpiece, eliminating the need for cleaning processes. (Excluding Mold-Free MF-02S) ■ It is also effective in improving resin flow. ■ It is non-flammable, thus not classified as hazardous under fire laws. (Excluding Mold-Free) It has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding and addressing melt fracture issues.

• Other molds

"FluoroSurf" and "Mold-Free" provide excellent non-stick release properties to metal surfaces when applied. Please try it if conventional release agents do not work. PFAS-regulated substances are not used. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing for continuous release even when conventional release agents fail. ■ The film thickness is just a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ FluoroSurf can be applied with a brush or spray gun, while Mold-Free can be applied directly from an aerosol can. Application is completed in 10 minutes at room temperature, eliminating the need for external processing like baked fluororesin. ■ There is no accumulation of dirt on the mold, and no transfer to the workpiece, eliminating the need for cleaning processes. (Excluding Mold-Free MF-02S) ■ It is also effective in improving resin flow. ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable, thus not classified as a hazardous material under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

• Other molds

The "Anti-Soil and Fingerprint Resistant Coating Agent FluoroSurf FG-5000 Series" is a coating agent that forms a non-stick surface with anti-soil properties. It can be easily applied, dries at room temperature for surface treatment, and makes it difficult for fingerprints and grease to adhere, while also allowing for easy wiping. 【Features】 ■ Reduces the adhesion of fingerprints and dirt, making it easy to wipe off any dirt that does adhere. ■ Provides continuous functionality due to its high adhesion film. ■ The surface has a low dynamic friction coefficient, resulting in a dry lubricated surface. ■ Chemically bonds with various materials such as glass and metal at room temperature, forming a transparent anti-soil film. ■ Being a thin film, it does not compromise the appearance of the material. ◎ Samples are available for those who request them (limited to corporations). Please note that our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

• Coating Agent

Fluorine-based super hydrophobic coatings allow water droplets to roll off at several angles, making them ideal for protecting printed circuit boards! 1. For printed circuit boards, moisture is the greatest enemy. It can repel liquids such as condensation, rain that intrudes from the outside of the equipment housing, and electrolyte leaked from batteries, thus providing strong protection for the circuit board. 2. Printed circuit boards are installed inside equipment housings, so they are not exposed to environments that cause the aforementioned super hydrophobic issues. 3. Fluorine-based coating films possess high moisture resistance, insulation performance, as well as acid resistance and resistance to lithium battery electrolytes. Even if the super hydrophobic structure is compromised, the protective performance for the circuit board does not diminish. 4. Furthermore, FluoroSurf is non-flammable and legally classified as non-organic solvent. Its high safety allows for a significant reduction in management items related to hazardous materials under fire safety laws and organic solvents under occupational safety and health laws. This also minimizes capital investment. 5. Drying is completed at room temperature in 5 minutes. No heating process is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

The "FloroSurf FS-1610 Series" is a non-combustible solvent-based water and oil repellent treatment agent/oil barrier agent. It includes products such as "FS-1610," which is suitable for preventing flux creep and protecting electronic component contacts, as well as "FS-1620" and "FS-1640." Various film thicknesses can be accommodated depending on the application. 【Features】 ■ Strongly blocks the creep of oils, resins, and flux ■ Effective with a thin film ■ Easy application; dries in 5 seconds at room temperature ■ Non-flammable and low toxicity ■ Does not harm plastics *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The "Metal Anti-Contamination and Lubrication Coating Agent FluoroSurf FG-5093" forms a high-adhesion, high-hardness transparent fluororesin film on the metal surface when applied, imparting functions such as water repellency, oil repellency, non-stick properties, anti-contamination, fingerprint reduction, low friction, and release properties. It becomes difficult for fingerprints and grease stains to adhere, and wiping them off is easy. It strongly adheres to metal, has excellent abrasion resistance, and maintains its effectiveness over a long period. Free samples are available upon request. 【Features】 ■ Reduces the adhesion of fingerprints and dirt on metal surfaces, making it easy to wipe off any adhered dirt. ■ The film has high adhesion and wear resistance, ensuring long-lasting effectiveness. ■ The coefficient of dynamic friction on the surface is low, providing a dry lubricated surface. ■ Chemically bonds to metal at room temperature to form a transparent anti-contamination film. ■ The coating is a nanometer-level thin film, so it does not compromise the appearance of the material. ■ It uses a non-flammable, low-toxicity, low-odor fluorinated solvent, making it safe for use. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

The "FloroSurf FS-702X Series" is a product that can impart functionalities such as anti-fouling, low refractive index, slip resistance, and water and oil repellency by adding just a small amount to UV-curable acrylic hard coat agents. During drying, the fluorine component rises to the surface of the hard coat agent to exhibit its functions, and an addition amount of about 1-3% is sufficient. It offers good cost performance. It also demonstrates effectiveness in enhancing abrasion resistance as it co-polymerizes and integrates with the components of the hard coat agent during UV irradiation. It is ideal for surface modification of various plastic films, such as plastic touch panels. 【Features】 ■ Effective with an addition amount of 1-3% ■ Low oil and grease slip angle, excellent fingerprint removal properties ■ Three types available based on compatibility with hard coat agents *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The water and oil repellent treatment agent "Fluorosurf" exhibits water and oil repellency through the fluororesin film formed on the surface, effectively repelling water and oil. It easily provides various benefits such as barrier against grease (preventing rise), diffusion prevention, adhesion prevention, and dirt resistance. Additionally, it does not use PFAS regulated substances like PFOS and PFOA. 【Features】 ◯ Easy coating with a brush or immersion. Dries in 5 seconds to 15 minutes at room temperature. After drying, a fluororesin film is formed, demonstrating effectiveness in dirt resistance, water repellency, and moisture resistance. 【Effective for the following applications!】 ■ Waterproof and moisture-proof protection for printed circuit boards, coatings resistant to lithium electrolyte, acids, and sulfides ■ Prevention of fingerprint adhesion on displays and lenses ■ Release agent for molds used in resin and elastomer shaping ■ Prevention of oil leakage from motor bearings ■ Flow stop for capacitor sealing resin ■ Reduction of reflected light in optical components ■ Binder for dry lubricants ■ Concentrate for waterproof spray for shoes and clothing... *If you would like a free sample, please include "Sample Request" in your inquiry. Please note that our products are industrial chemical products, and we cannot provide samples for personal use (if not a legal entity), medical use, or applications involving food contact.

• paint

In the semiconductor manufacturing industry, maintaining a cleanroom environment is extremely important. Fine dust and particles can significantly degrade product quality, so thorough contamination control measures are required. Additionally, the effects of humidity and chemicals during the manufacturing process can also undermine product reliability. Our fluorine coating agents address these challenges by providing anti-contamination, water-repellent, and moisture-proof properties, helping to maintain the cleanroom environment and contribute to yield improvement. 【Application Scenarios】 - Contamination control measures for equipment and parts within cleanrooms - Water-repellent and moisture-proof protection for semiconductor manufacturing equipment - Dirt prevention for wafer transport fixtures 【Benefits of Implementation】 - Reduction in defect rates due to foreign material adhesion - Decreased frequency of equipment maintenance - Improvement in product quality

• paint

In the mold industry, there is always a demand for improving the quality of molded products and production efficiency. In particular, release in resin and rubber molding is a critical issue that directly relates to molding defects and decreased productivity. Conventional release agents often lead to problems such as poor release, adhesion to molds, and the hassle of application. Our easy-to-use fluorine coating agent addresses these challenges and contributes to increased productivity. 【Usage Scenarios】 - Molds for resin molding - Molds for rubber molding - Molds for elastomer molding 【Benefits of Implementation】 - Improved release properties - Reduced molding defects - Extended mold lifespan - Increased productivity

• paint

In the printing industry, ink adhesion and stains are significant issues that greatly compromise the quality of printed materials. Particularly in various printing methods such as inkjet and offset printing, ink bleeding, back transfer, and the adhesion of stains can lead to the occurrence of defective products and a decrease in work efficiency. Our fluorine coating agent suppresses ink adhesion and contributes to the improvement of printed material quality. 【Usage Scenarios】 - Prevention of ink adhesion on printed materials - Prevention of ink stains on printing machines - Prevention of nozzle clogging in inkjet printers 【Benefits of Implementation】 - Improvement in the quality of printed materials - Reduction of defective products - Increase in work efficiency

• paint

In the textile industry, there is a demand for improved durability and functionality of products. In particular, oil stains are a significant factor that undermines product quality and decreases customer satisfaction. Our fluorine coating agent imparts oil-repellent properties to textile products, preventing the adhesion of oil stains. This helps maintain the aesthetic appeal of the products and makes maintenance easier. 【Usage Scenarios】 - Apparel - Bags - Outdoor gear - Uniforms 【Benefits of Implementation】 - Protection from oil stains - Improved product durability - Increased customer satisfaction - Reduced maintenance costs

• paint

In the sports equipment industry, especially in the sliding surfaces of skis and snowboards, maintaining sliding performance is crucial. High friction resistance on the sliding surface can lead to a decrease in speed and negatively impact performance. Additionally, the adhesion of snow, ice, and moisture can also impair sliding ability. Our fluorine coating agent reduces friction on the sliding surface and provides water repellency, thereby enhancing sliding performance. It is easy to apply and can be done in-house. 【Usage Scenarios】 - Sliding surfaces of skis and snowboards - Sleds - Ice skate blades 【Benefits of Implementation】 - Improved sliding ability - Reduced friction resistance - Water repellency - Prevention of dirt adhesion

• paint