フロロテクノロジー List of Products and Services

The FluoroSurf FG-3630 series forms a transparent acid-resistant fluororesin film on the coated surface. It can shut out sulfur gases from LEDs and prevent brightness reduction caused by sulfide, such as silver plating. Free samples are available upon request. It is effective with a thin film, so the coating does not reduce the brightness of the LEDs. Additionally, the fluorine coating is chemically stable, allowing for long-term protection. 【Features】 ■ The coating solution uses a non-flammable and safe solvent. ■ Low odor and low toxicity help maintain a good workplace environment. ■ It dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

A fluorosurfactant that forms a water-repellent and oil-repellent film with a pencil hardness of 3H, capable of reducing dirt adhesion. 【Features】 ■ Forms a water-repellent and oil-repellent film with a pencil hardness of 3H, capable of reducing dirt adhesion. ■ Also functions as a moisture-proof and rust-proof coating. ■ The film has a low refractive index (1.41). By controlling the film thickness to about 0.1μ, it can also be used as a low-reflective surface coat. ■ When applied to transparent plates or lenses, light transmittance increases by 3-4%. ■ The effect is particularly enhanced when stacking multiple lenses. *If you would like a free sample, please include "Sample Request" in your inquiry.

The fluorosurf FG-3650 series protective coating for electronic circuit boards is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. 【Features】 ■ Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. ■ Provides strong protection against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. ■ Non-flammable and low-odor, ensuring safe usage without fire safety regulations. ■ Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. Free samples are available upon request. 【Introduction to Background】 ■ Prevent metal migration due to moisture in multilayer mounted circuit boards ■ Short circuits and failures caused by water droplets and humidity during outdoor use ■ Prevention of fire due to short circuits from leakage of lithium battery electrolyte ■ Occurrence of leaks and malfunctions due to condensation in high humidity *If you would like a free sample, please include "Request for Sample" in your inquiry.

The fluorosurf FG-3650 series protective coating for electronic substrates has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Reasons for choosing FG-3650】 ■ High migration prevention performance ■ Non-hazardous under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. We offer free samples to those who request them. 【Challenges】 ■ High waterproofing ■ Quick-drying ■ Non-hazardous with low odor since the equipment is not explosion-proof *If you would like a free sample, please include "Request for Sample" in your inquiry.

The fluorosurf FG-3650 series protective coating for electronic substrates is specially designed for waterproofing and insulation protection of electronic components, as well as moisture and waterproofing of mounted circuit boards. It has four times the moisture resistance compared to urethane and acrylic-based coatings, and exhibits protective functions such as insulation, moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It can be applied using a dispenser or spray, and the application is completed in just 5-10 minutes with room temperature drying! It is non-flammable, not subject to fire safety laws, and not classified as an organic solvent under safety and health regulations, significantly reducing management items and equipment costs on site. *Free samples are available for those who wish (limited to corporations). If you would like a free sample, please include "Sample Request" in your inquiry.

The fluorosurf FG-3650 series protective coating for electronic substrates exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It is non-flammable and classified as a non-hazardous material under fire safety laws. This eliminates the need for certification of hazardous material handling, quantity management, and explosion-proof equipment management. It is also not classified as an organic solvent under the Industrial Safety and Health Act, so there is no need for organic health checks for workers or regular environmental measurements at the site. *Currently, free samples are being offered. We sincerely apologize, but our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

The conformal coating agent, Fluorosurf FG-3650 series, is specially designed for waterproofing and insulation protection of electronic components, as well as moisture and waterproofing of mounted circuit boards. It has four times the moisture resistance compared to urethane and acrylic-based coatings, and exhibits protective functions such as insulation, moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It can be applied using a dispenser or spray, and the application is completed in just 5-10 minutes with room temperature drying! It is non-flammable and not subject to fire safety laws, nor does it fall under the organic solvent regulations of the Industrial Safety and Health Act, significantly reducing on-site management items and equipment costs. Fluorine-based regulated substances (such as PFOS, PFOA, PFHxS) are not used. *We offer free samples to those who request them (limited to corporations). If you would like a free sample, please include "Sample Request" in your inquiry.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of printed circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to Choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, eliminating the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous according to the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (Occupational Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

Fluorine-based coatings exhibit outstanding resistance to lithium battery electrolyte compared to other resin coatings. They can prevent fires caused by circuit short circuits when the electrolyte leaks and corrosion of metal parts. There are proven applications as safety measures in various fields such as aircraft, automotive circuit boards, and mobile devices. 【Challenges Addressed by FluoroSurf】 - No short circuits occur even if lithium battery electrolyte leaks and adheres to the circuit board patterns. - Can be easily applied with dispensers and dries quickly at room temperature, eliminating the need for a drying process. - Non-hazardous materials with no regulations under fire safety laws. - Not classified as organic solvents under the Industrial Safety and Health Act. Additionally, it is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coatings for mounted circuit boards. It provides protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency in a thin film. *Free samples are available for those who request them (limited to corporate clients). Please indicate "Sample Request" in your inquiry. *We sincerely apologize, but as our products are industrial chemical products, we cannot provide samples for medical or food-contact applications.

The "FloroSurf FG-3650 Series" electronic substrate protective coating agent (conformal coating agent) is suitable for waterproofing and insulating protection of electronic components, as well as for moisture-proof and waterproof coating of mounted substrates. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, water and oil repellency, gasoline resistance, migration prevention, and condensation leak prevention, all in a thin film. 【Features】 ■ It is a non-flammable, low-odor liquid, making it safe to use! → FloroSurf FG-3650 is non-flammable and low in toxicity, thus not subject to PRTR law or fire service law regulations. It is also not classified as an organic solvent under the Industrial Safety and Health Act. ■ It has higher moisture and waterproof properties compared to other resins! → It has four times the moisture resistance performance compared to urethane and acrylic-based moisture-proof coatings. ■ It is resistant to acidic substances such as lithium battery electrolytes! → It can protect the substrate during electrolyte leakage, preventing fire accidents. *If you would like a free sample and technical booklet, please include "Sample Request" or "Booklet Request" in your inquiry.

The conformal coating agent for automotive circuit boards, "FloroSurf," is resistant to gasoline and is suitable for waterproofing and insulation protection of automotive electronic components, as well as for moisture-proof waterproof coatings to prevent ion migration on mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, and water and oil repellency with a thin film. 【Features】 ■ It is a non-flammable, low-odor liquid, making it safe to use! → FloroSurf is non-flammable and low in toxicity, thus exempt from PRTR law and fire service law regulations. It is also not classified as an organic solvent under the Industrial Safety and Health Act. ■ It has higher moisture and waterproofing properties compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings. ■ It is resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ We offer two types: FS-1610, which emphasizes gasoline resistance, and FG-3650, which focuses on protective performance, allowing for various choices to meet your needs. *If you would like a free sample, please include "Sample Request" in your inquiry.

The protective coating agent for electronic substrates, "Fluorosurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → Fluorosurf FG-3650 is non-flammable and low in toxicity, ensuring safety. It is not subject to PRTR law or fire service law regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces the management items for environmental measurement and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment such as heating furnaces is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons for choosing FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

The fluorine coating agent (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on printed circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. PFAS regulated substances are not used. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → FloroSurf FG-3650 is non-flammable and low in toxicity, ensuring safety. It is not subject to PRTR law or fire service law regulations. No explosion-proof equipment is required, and quantity management is not necessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces management items such as environmental measurements and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment such as heating furnaces is required. ☆ Currently providing samples and a moisture-proof coating handbook exclusively for corporate clients.

Fluorine coating agents exhibit outstanding resistance to lithium battery electrolyte compared to other resin coating agents. They can prevent fires caused by circuit short-circuits when the electrolyte leaks, as well as corrosion of metal parts. They provide protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency in a thin film. They have a proven track record of being adopted as safety measures in various fields, including aircraft, automotive circuit boards, and mobile devices. **Challenges Addressed by Fluorine Coating** - No short-circuit occurs even if lithium battery electrolyte leaks and adheres to the pattern part of the circuit board. - Can be easily applied with dispensers and dries within a few minutes at room temperature. No drying process is required. - Non-hazardous materials with no fire safety regulations. No quantity management or explosion-proof measures are necessary. - Not classified as organic solvents under the Industrial Safety and Health Act. Regular organic health checks are not required. *We offer free samples to those who request them (limited to corporate clients). Please indicate "Sample Request" in your inquiry. *We sincerely apologize, but as our products are industrial chemical products, we cannot provide samples for medical or food-related applications.

The fluorine coating agent (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on printed circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. PFAS-regulated substances are not used. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire service law regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces management items such as environmental measurements and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board during electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ☆ Currently providing samples and a moisture-proof coating handbook exclusively for corporate clients.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous according to the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (Occupational Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane-based, acrylic-based, and silicone-based coatings, it offers 3 to 10 times better moisture resistance (at the same film thickness). It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ It can be used safely as it is a non-flammable, low-odor liquid! → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Curing at room temperature takes only 5-20 minutes after application → No special equipment like heating furnaces is needed. ■ It has low viscosity, making it easy to handle. The workplace remains clean. ■ The pot life is semi-permanent, resulting in zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed to protect printed circuit boards from acidic substances (such as hydrogen sulfide gas and lithium battery electrolyte). It provides strong protection for metals against acidic gases and liquids with a thin film, ensuring long-term protection for printed circuit boards. 【Reasons for choosing FG-3650】 ■ High protective performance ■ Non-hazardous under the Fire Service Act, so explosion-proof equipment and quantity management are not required ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), so environmental measurements and organic solvent health checks for workers are not necessary, making on-site management easier ■ Dries at room temperature in a short time, no drying equipment required ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. 【Benefits in the Manufacturing Environment】 ■ It can be safely used as it is a non-flammable, low-odor liquid! → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ It has low viscosity, making it easy to handle. The workplace remains clean. ■ The pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons for choosing FG-3650】 ■ High migration prevention performance ■ Non-hazardous material according to the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (Occupational Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, eliminating the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

The protective coating agent for electronic substrates, "FloroSurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating (conformal coating) of mounted substrates. ▼ Excellent performance of FloroSurf FG-3650 Series High moisture and waterproof properties / Resistance to lithium battery electrolyte / Acid resistance and resistance to oxidizing gases High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ~ We are offering free samples exclusively for corporate clients! ~ Please select "Request Sample" from the [Contact Button] below.

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and not classified as an organic solvent, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness). It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → No need for management items such as workplace environmental measurements or organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *Please contact us if you would like a free sample.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane-based, acrylic-based, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for insulating protection and waterproofing of electronic components and mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone-based insulating coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational safety and health law. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

The "Fluorosurf FG-3650 Series" electronic substrate protective coating (conformal coating) has numerous achievements in waterproofing and insulation protection for automotive substrates and electronic components, as well as in moisture-proof and waterproof coatings for mounted substrates. 【Performance Features】 ■ Higher moisture and waterproof properties compared to other resins! → It offers four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits over ten times the moisture-proof performance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the substrate during electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ In reactive coatings (silicone, UV acrylic, etc.), unreacted components remain and affect properties. This product does not retain unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failures in electrical connections after application. ■ A model with fluorescent dye for application confirmation is also available. *If you would like a free sample, please contact us.

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law restrictions. Compared to urethane, acrylic, and silicone-based coatings, it offers 3 to 10 times better moisture resistance (at the same film thickness). It provides protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations, eliminating the need for explosion-proof equipment and quantity management. ■ Not classified as an organic solvent under occupational health and safety law. → No need for environmental measurements in the workplace or organic solvent health checks for workers. ■ Cures at room temperature in 5-20 minutes after application. → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle, and it does not dirty the workplace. ■ The pot life is virtually permanent, resulting in zero waste. ■ Repairs can be made after coating. *If you would like a free sample, please contact us.

The protective coating agent for electronic substrates, "FloroSurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating (conformal coating) of mounted substrates. ▼ Excellent performance of FloroSurf FG-3650 Series High moisture and waterproof properties / Resistant to lithium battery electrolyte / Acid and oxidation gas resistant High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ～ Free samples are available exclusively for corporate clients! ～ Please indicate "Sample Request" using the [Contact Button] below.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law restrictions. Additionally, it does not use PFAS regulated substances such as PFOS and PFOA. 【Performance Features】 ■ Higher moisture-proof and waterproof properties compared to other resins! → It offers four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. It minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances such as the electrolyte of lithium batteries! → It can protect the substrate during electrolyte leakage, preventing fire accidents. ■ It demonstrates strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please include "Sample Request" in your inquiry.

The coating agent for substrates (conformal coating) "Fluorosurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from the restrictions of fire laws and safety regulations. Furthermore, no PFAS regulated substances such as PFOS, PFOA, or PFHxS are used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. ■ Compared to other resins, it has high moisture and waterproof properties. → It has four times the moisture resistance performance compared to urethane or acrylic moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in case of electrolyte leakage, preventing fire accidents. ■ It also exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, providing rust prevention effects. ■ It does not contain unreacted low molecular compounds like silicone or UV-curable types, ensuring high reliability. It will not cause contact failure of electrical contacts after application.

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all with a thin film coating! It is ideal for waterproofing and insulating protection of electronic components, as well as moisture-proof and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations, and it contains no PFOS or PFOA. 【Performance Features】 ■ High moisture and water resistance → Offers 4 times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits over 10 times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes → Can protect the circuit board during electrolyte leakage, preventing fire accidents. ■ Provides powerful protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ Does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

Conformal Coating (Protective Coating for Electronic Circuit Boards) "Fluorosurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not contain organic solvents (VOC), making it free from fire safety laws, occupational safety and health laws, and VOC regulations. Furthermore, our products do not use PFOS or PFOA at all. 【Performance Features】 ■ High resistance to acidic substances such as the electrolyte of lithium batteries → Protects the circuit board in case of electrolyte leakage, preventing fire accidents. ■ Higher moisture-proof and waterproof properties compared to other resins → Provides four times the moisture-proof performance compared to urethane or acrylic moisture-proof coatings at the same film thickness! Exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ Exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

The protective coating agent for electronic circuit boards (conformal coating) "Fluorosurf FG-3650 series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating. It has numerous achievements in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations. Additionally, it does not contain any PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has four times the moisture-proof performance! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Since it does not contain low molecular compounds, it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, leak prevention, and moisture-proof and waterproof coatings for mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety law restrictions. Additionally, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It has four times the moisture resistance performance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimal, making it ideal for lightweight mobile devices. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in case of electrolyte leakage, preventing fire accidents. - It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. - It does not contain low molecular compounds like silicone, which can cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

Conformal Coating (Protective Coating Agent for Electronic Circuit Boards) "FloroSurf FG-3650 Series" is ideal for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards and leak prevention for narrow pitch patterns. It is non-flammable and does not contain organic solvents (VOC), making it free from fire safety laws, occupational safety and health laws, and VOC regulations. Additionally, PFOS and PFOA are not used at all. 【Performance Features】 ■ High resistance to acidic substances such as the electrolyte of lithium batteries → Can protect the circuit board during electrolyte leakage, preventing fire accidents. ■ Superior moisture-proof and waterproof properties compared to other resins → Provides four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings at the same film thickness! Exhibits over ten times the moisture-proof performance compared to silicone-based coatings. Minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ Does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. ■ A model with fluorescent dye for application verification is also available. *If you would like a free sample, please contact us.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not contain VOC organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Furthermore, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It has 4 times the moisture resistance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in the event of electrolyte leakage, preventing fire accidents. - It also exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, providing rust prevention effects. - It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating. It has a proven track record in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted circuit boards. It is non-flammable and not classified as an organic solvent, thus free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Additionally, it does not contain any PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → It offers four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances like lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ It does not contain low molecular compounds, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating! It has numerous achievements in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted substrates. It is non-flammable and not classified as an organic solvent, thus free from regulations under fire safety laws and occupational safety and health laws. Additionally, it does not use any PFAS regulated substances such as PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has four times the moisture-proof performance! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The weight increase due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in the event of electrolyte leakage, preventing fire accidents. ■ It demonstrates strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ It does not contain low molecular compounds, so it will not cause contact failure of electrical contacts after application.

"FloroSurf" is a fluorine coating agent that can protect metals from hydrogen sulfide and prevent discoloration. A transparent fluorine film is formed at room temperature simply by applying it. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under fire safety and occupational health and safety laws. Additionally, our products do not contain any PFOS or PFOA. 【Performance Features】 It exhibits protective functions such as thin film resistance to hydrogen sulfide, moisture, saltwater, water, acids, lithium battery electrolyte, and water and oil repellency! ■ It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, as well as rust prevention. ■ It is insulating and can also be used to protect electronic circuit boards. ■ It has high resistance to lithium battery electrolytes. → It can protect circuit boards in the event of electrolyte leakage, preventing fire accidents. ■ It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please include "Sample Request" in your inquiry.

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" has numerous achievements in waterproofing and insulation protection for automotive circuit boards and electronic components. Additionally, it is not subject to PFAS regulations. 【Performance Features】 ■ Higher moisture and waterproofing properties compared to other resins! → It has 4 times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. This minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect circuit boards during electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ In reactive coatings (silicone, UV acrylic, etc.), unreacted components remain and affect properties. This product does not leave unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failures at electrical connections after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. 【Features】 ■ Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. ■ Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. ■ Non-flammable and low-odor, ensuring safe usage. There are no fire safety regulations. ■ Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. ■ Does not use PFAS regulated substances (such as PFOA, PFOS, PFHxS). *If you would like a free sample, please include "Sample Request" in your inquiry.

The fluorosurf FG-3650 series protective coating for electronic substrates exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It is non-flammable and classified as a non-hazardous material under fire safety laws. This means that certification for hazardous material handling, quantity management, and explosion-proof equipment are all unnecessary. It is also not classified as an organic solvent under the Industrial Safety and Health Act, so there is no need for organic health checks for workers or regular environmental measurements at the site. Current PFAS regulatory substances such as PFOS/PFOA are not used. *Currently, free samples are being offered. We sincerely apologize, but our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.