フロロテクノロジー Product Lineup

The fluorosurf FG-3650 series protective coating for electronic substrates exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It is non-flammable and classified as a non-hazardous material under fire safety laws. This eliminates the need for certification at hazardous material handling locations, quantity management, and explosion-proof equipment management. It is also not classified as an organic solvent under the Industrial Safety and Health Act, so there is no need for organic health checks for workers or regular environmental measurements at the site. Current PFAS regulatory substances such as PFOS/PFOA are not used. *Currently, free samples are being offered. We sincerely apologize, but as our products are industrial chemical products, we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

The "FloroSurf FG-3650 Series" electronic circuit board protective coating (conformal coating) is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational safety and health law. → This eliminates the need for environmental measurements in the workplace and organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle, keeping the workplace clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs can be made after coating. *Please contact us if you would like a free sample.

The fluorosurf FG-3650 series protective coating for electronic circuit boards is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. PFAS-regulated substances are not used. 【Features】 - Four times the moisture resistance compared to urethane and acrylic moisture-proof coatings. - Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. - Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. - Non-flammable and low-odor, ensuring safe use. There are no fire safety regulations, significantly reducing management items. - Not classified as an organic solvent. - Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as for moisture and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. PFAS-regulated substances are not used. 【Features】 ■ Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. ■ Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids. Also effective in preventing rust. ■ Non-flammable and low-odor, allowing for safe use. There are no fire safety regulations, significantly reducing management items. ■ Not classified as an organic solvent. ■ Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

The "FloroSurf FG-3650 Series" electronic circuit board protective coating (conformal coating) is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → No need for environmental measurements in the workplace or organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle, keeping the workplace clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs can be made after coating. *If you would like a free sample, please contact us.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane-based, acrylic-based, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 Perfectly aligned with SDGs ■ Non-flammable and low-odor liquid, making it safe to use → Safe due to its non-flammability and low toxicity. Not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Eliminates the need for environmental measurements in the workplace and organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment or processes, such as heating furnaces, are required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually indefinite. Zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

The "FloroSurf FG-3650 Series" protective coating agent for electronic circuit boards (conformal coating) is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. [Advantages in Manufacturing] Perfectly aligns with SDGs - Non-flammable and low-odor liquid, allowing for safe use → Safe due to being non-flammable and low toxicity. Exempt from PRTR law and fire safety regulations. No need for explosion-proof equipment or quantity management. - Not classified as an organic solvent under occupational safety and health law → Eliminates the need for environmental measurements in the workplace and organic solvent health checks for workers. - Cures at room temperature in 5-20 minutes after application! → No special equipment or processes like heating furnaces are required. - Low viscosity makes it easy to handle, keeping the workplace clean. - Pot life is virtually permanent, resulting in zero waste. - Repairs are possible after coating. *Please contact us if you would like a free sample.

The acid-resistant coating agent FG-5040 and the protective coating agent for electronic substrates, the Fluorosurf FG-3650 series, are coatings designed for acid resistance and anti-conversion. They have four times the moisture resistance compared to urethane and acrylic-based coatings, and they exhibit protective functions such as resistance to hydrogen sulfide, acid resistance, corrosion resistance, insulation, moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. They can be applied using a dispenser or spray, and the application is completed in 5-10 minutes with room temperature drying! They are non-flammable and not subject to fire safety laws, nor are they classified as organic solvents under the Industrial Safety and Health Act, significantly reducing management items and equipment costs on-site. *Free samples are available for those who wish (limited to corporations). If you would like a free sample, please include "Sample Request" in your inquiry.

The protective coating agent for electronic substrates, "Fluorosurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating (conformal coating) of mounted substrates. Although it is fluorine-based, it is not subject to PFAS regulations. ▼ Excellent performance of Fluorosurf FG-3650 Series High moisture and waterproof properties / Resistance to lithium battery electrolyte / Acid resistance and resistance to oxidative gases High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ~ We are offering free samples exclusively for corporate clients! ~ Please select "Request Sample" from the [Contact Button] below.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. Free samples are available upon request. 【Introduction Background】 ■ Prevent metal migration due to moisture in multilayer mounted circuit boards ■ Short circuits and failures caused by water droplets and humidity during outdoor use ■ Prevention of fire due to short circuits from lithium battery electrolyte leakage ■ Malfunctions and corrosion caused by leaks due to condensation in high humidity ■ No need for management as hazardous materials or organic solvents ■ Exempt from PFAS regulatory substances *If you would like a free sample, please include "Sample Request" in your inquiry.

The "FloroSurf FG-3650 Series" electronic substrate protective coating (conformal coating) has numerous achievements in waterproofing and insulation protection for automotive substrates and electronic components, as well as in moisture-proof and waterproof coatings for mounted substrates. 【Performance Features】 ■ Higher moisture-proof and waterproof properties compared to other resins! → It offers four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. It minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Unlike reactive coatings (silicone, UV acrylic, etc.) that leave unreacted components that can affect properties, this product does not leave unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failure of electrical contacts after application. ■ Resistant to acidic substances such as lithium battery electrolytes! → Prevents fire accidents. ■ Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

The conformal coating agent FluoroSurf FG-3650 series is a specially designed coating agent for waterproofing and insulation protection of electronic components, as well as for moisture and waterproofing of mounted circuit boards. It has four times the moisture resistance compared to urethane and acrylic-based coatings, and it exhibits protective functions such as insulation, moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It can be applied using a dispenser or spray, and the application is completed in 5-10 minutes with room temperature drying! It is non-flammable and not subject to fire safety laws, nor is it classified as an organic solvent under occupational safety and health laws, significantly reducing management items and equipment costs on-site. Fluorinated regulated substances (such as PFOS, PFOA, PFHxS, etc.) are not used. *Free samples are available upon request (limited to corporations). If you would like a free sample, please include "Sample Request" in your inquiry.

In the automotive industry, corrosion of electronic circuit boards is a serious issue that can lead to decreased vehicle performance and failures. Particularly in environments exposed to moisture, salt, and vibrations, the corrosion of circuit boards can accelerate. In response to this problem, our coating agent for circuit boards offers moisture resistance, saltwater resistance, and acid resistance, providing strong protection against corrosion. This contributes to improving the reliability of vehicles. 【Application Scenarios】 - In-vehicle electronic devices (ECUs, meters, etc.) - Body electrical components - Rust prevention for connector parts 【Benefits of Implementation】 - Reduced risk of failures due to corrosion of electronic circuit boards - Extended product lifespan - Reduced maintenance costs - Improved vehicle reliability

In the aerospace industry, high reliability is required, and the protection of electronic circuit boards is essential. Exposure to temperature changes, vibrations, electromagnetic waves, and corrosive substances in outer space or at high altitudes can lead to failures in electronic equipment. Our coating agents for circuit boards protect them even in these environments and contribute to improving the reliability of the equipment. 【Application Scenarios】 - Moisture-proof, waterproof, and insulation protection for electronic circuit boards in aircraft and spacecraft - Protection of electronic devices used in harsh environments - Protection of electronic components from vibrations and shocks 【Benefits of Implementation】 - Reduced risk of electronic circuit board failures - Extended lifespan of equipment - Reduced maintenance costs

In the telecommunications industry, the reliability of electronic devices is extremely important, and the stability of signals is essential. Equipment used outdoors or in harsh environments can deteriorate due to moisture, corrosive substances, and temperature changes, potentially leading to signal disruption and equipment failure. Our coating agents for circuit boards address these issues through moisture resistance, insulation, and acid resistance, supporting stable signal transmission. 【Usage Scenarios】 - Base stations - Communication cable connections - Wireless communication devices - IoT devices 【Benefits of Implementation】 - Signal stabilization - Extended equipment lifespan - Reduced maintenance costs - Lower risk of failure

In the industrial machinery industry, circuit board failures can lead to operational downtime and significant losses. Especially in industrial machinery used in harsh environments, moisture and waterproof measures for circuit boards are essential for prolonging product lifespan. Our coating agents for circuit boards offer four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings, protecting circuit boards in industrial machinery from moisture and corrosion. This reduces the risk of failure and contributes to stable operation. 【Usage Scenarios】 - Machine tools - Control panels for manufacturing lines - Outdoor measuring instruments - Electronic devices used in harsh environments 【Benefits of Implementation】 - Prevents corrosion and rusting of circuit boards - Enhances product reliability - Reduces maintenance costs - Extends product lifespan - Increases operational efficiency

In the solar power generation industry, the long-term stable operation of systems and the maintenance of power generation efficiency are crucial. Solar power generation systems installed in outdoor environments are susceptible to influences such as humidity, temperature changes, ultraviolet rays, and salt damage, which can lead to substrate corrosion and insulation failures, potentially resulting in decreased power generation efficiency and system failures. Our coating agents for substrates address these challenges and contribute to the long-term stable operation and efficiency maintenance of the systems by protecting the substrates. 【Usage Scenarios】 - Substrates of solar power generation systems - Outdoor electronic devices - Use in humid environments 【Benefits of Implementation】 - Prevention of substrate corrosion - Improvement of insulation properties - Long-term system stability - Maintenance of power generation efficiency

In the defense sector, the reliability of electronic devices is extremely important, and they must be able to withstand use in harsh environments. It is essential to protect electronic circuit boards from factors such as humidity, saltwater, corrosive substances, and temperature fluctuations. These factors can cause equipment malfunctions or failures, potentially hindering operational execution. Our coating agents for circuit boards excel in moisture resistance, waterproofing, and acid resistance, protecting electronic devices from these risks. They offer four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings, providing moisture protection effects with a thin film. They are also resistant to the electrolyte of lithium batteries, contributing to the prevention of fire accidents. 【Application Scenarios】 * Electronic devices used outdoors * Communication equipment used in harsh environments * Electronic circuit boards that may be exposed to corrosive substances 【Benefits of Implementation】 * Improved reliability of electronic devices * Extended lifespan of equipment * Reduced maintenance costs

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. 【Features】 ■ Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. ■ Provides strong protection against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. ■ Non-flammable and low-odor, ensuring safe use. No fire safety regulations apply, and explosion-proof equipment or hazardous material storage is not required. ■ Exempt from the Organic Law under the Industrial Safety and Health Act, reducing management items. ■ Dries at room temperature, with drying times ranging from 5 seconds to 30 minutes. No heating is required. ■ Does not use regulated PFAS substances (such as PFOA, PFOS, PFHxS, etc.). *If you would like a free sample, please include "Sample Request" in your inquiry.

The fluorosurf FG-3650 series protective coating for electronic substrates is suitable for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coating for mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. 【Features】 - Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. - Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. - Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. - Non-flammable and low-odor, ensuring safe use without fire safety regulations or the need for explosion-proof equipment or hazardous material storage. - Exempt from the Organic Law under the Industrial Safety and Health Act, reducing management items. - Dries at room temperature, with a drying time of 5 seconds to 30 minutes, no heating required. - Does not use PFAS regulated substances (such as PFOA, PFOS, PFHxS, etc.). *If you would like a free sample, please include "Sample Request" in your inquiry.

In the automotive industry, corrosion of electronic circuit boards is a serious issue that can lead to decreased vehicle performance and failures. Particularly in environments exposed to moisture, salt, and vibrations, the corrosion of circuit boards can accelerate. In response to this problem, our coating agent for circuit boards offers moisture resistance, saltwater resistance, and acid resistance, providing strong protection against corrosion. This contributes to improved reliability of vehicles. 【Application Scenarios】 - In-vehicle electronic devices (ECUs, meters, etc.) - Body electrical components - Rust prevention for connector parts 【Benefits of Implementation】 - Reduced risk of failures due to corrosion of electronic circuit boards - Extended product lifespan - Reduced maintenance costs - Improved vehicle reliability

In the aerospace industry, high reliability is required, and the protection of electronic circuit boards is essential. Exposure to temperature changes, vibrations, electromagnetic waves, and corrosive substances in outer space or at high altitudes can lead to failures in electronic devices. Our coating agents for circuit boards protect them even in these environments and contribute to improving the reliability of equipment. Furthermore, PFAS-regulated substances are not used. 【Application Scenarios】 - Moisture-proofing, waterproofing, and insulation protection for electronic circuit boards in aircraft and spacecraft - Protection of electronic devices used in harsh environments - Protection of electronic components from vibrations and shocks 【Benefits of Implementation】 - Reduced risk of failure for electronic circuit boards - Extended lifespan of equipment - Reduced maintenance costs

Conformal Coating (Protective Coating for Electronic Circuit Boards) "FloroSurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture and waterproof coating of mounted circuit boards. It is non-flammable and does not contain any regulated substances such as those under the Fire Service Act, Industrial Safety and Health Act, VOC regulations, or PFAS regulations, as it is free from organic solvents (VOC). 【Performance Features】 - Compared to other resin coatings, it offers high moisture and waterproof properties, contributing to weight reduction. → It provides four times the moisture resistance of urethane or acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the circuit board in case of electrolyte leakage, preventing fire accidents. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. - It demonstrates strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. - It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. - A model with fluorescent dye for application verification is also available. *If you would like a free sample, please contact us.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating! It is ideal for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coatings for mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety law restrictions, and it contains no PFOS or PFOA. 【Performance Features】 ■ High moisture resistance and waterproofing → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has 4 times the moisture-proof performance! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. It minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes → It can protect the substrate in the event of electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Since it does not contain low molecular compounds like silicone, it does not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

The protective coating agent for electronic substrates, conformal coating agent "FloroSurf FG-3650 Series," is designed with the highest priority on workplace safety and environmental preservation. It does not use regulated substances such as those under the Fire Service Act, Industrial Safety and Health Act, and PFAS regulations, and it has low odor, ensuring a safe and pleasant workplace environment. This coating agent is ideal for waterproofing and insulating protection of electronic components, as well as for moisture and waterproofing of mounted circuit boards. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use. → FloroSurf FG-3650 is non-flammable and low in toxicity, thus exempt from PRTR and Fire Service Act regulations. It is also not classified as an organic solvent under the Industrial Safety and Health Act. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture resistance of urethane and acrylic-based coatings, and ten times that of silicone-based coatings. Its thin film allows for weight reduction, making it suitable for mobile circuit boards, automotive circuit boards, and aircraft circuit boards. ■ Resistant to acidic substances such as electrolyte from lithium batteries! → It can protect the circuit board during electrolyte leakage, preventing fire accidents. *If you would like a free sample and technical brochure, please include "Sample Request" or "Brochure Request" in your inquiry.

The electronic circuit board protective coating agent "Fluorosurf FG-3650 Series" demonstrates high performance in waterproofing and insulation protection of electronic components, as well as in moisture-proof and waterproof coating (conformal coating) for mounted circuit boards. It is not subject to regulations on fluorinated compounds (PFAS). PFOA and PFOS are not used. ▼ Excellent performance of Fluorosurf FG-3650 Series: 4 to 10 times the moisture resistance compared to other resins (comparison at the same film thickness) High moisture-proof and waterproof properties / High anti-migration properties / Resistant to lithium battery electrolyte / Acid-resistant and resistant to oxidative gases / High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ~ We are offering free samples exclusively for corporate clients! ~ Please select "Request Sample" via the [Contact Button] below.

The "FloroSurf FG-3650 Series" conformal coating agent for electronic circuit boards is designed with a high moisture resistance of 4 to 10 times that of other resins, prioritizing safety and environmental preservation. It does not use regulated substances such as those under the Fire Service Act, Industrial Safety and Health Act, or PFAS regulations, and it has low odor, ensuring a safe and pleasant workplace environment. This coating agent is ideal for waterproofing and insulating protection of electronic components, as well as moisture and waterproofing of mounted circuit boards. 【Features】 ■ Non-flammable and low-odor liquid for safe use. → FloroSurf FG-3650 is non-flammable and low in toxicity, exempt from PRTR and Fire Service Act regulations. It is also not classified as an organic solvent under the Industrial Safety and Health Act. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture resistance of urethane and acrylic systems, and ten times that of silicone systems. Its thin film allows for weight reduction, making it suitable for mobile circuit boards, automotive circuit boards, and aircraft circuit boards. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect circuit boards during electrolyte leakage, preventing fire accidents. *If you would like a free sample and technical booklet, please include "Sample Request" or "Booklet Request" in your inquiry.

The electronic substrate protective coating agent (conformal coating) "Fluorosurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it exempt from regulations under the Fire Service Act and the Industrial Safety and Health Act. Additionally, it does not use PFAS regulated substances, significantly reducing management items in the workplace. Furthermore, compared to urethane, acrylic, and silicone-based coatings, it exhibits 3 to 10 times greater moisture resistance (at the same film thickness) while providing protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Benefits in the Manufacturing Field】 ■ Non-flammable and low-odor liquid, allowing for safe use → It is safe as it is non-flammable. Exempt from Fire Service Act regulations. No need for hazardous material storage, hazardous material handling manuals, or explosion-proof equipment, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → No need for environmental measurements in the workplace or organic solvent health checks for workers. ■ Cures at room temperature in 5-20 minutes after application → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, thus exempt from regulations under the Fire Service Act and the Industrial Safety and Health Act. Additionally, it does not use PFAS regulated substances, significantly reducing management items in the workplace. Furthermore, compared to urethane, acrylic, and silicone-based coatings, it exhibits 3 to 10 times greater moisture resistance (at the same film thickness) while providing protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Benefits in the Manufacturing Site】 ■ Safe to use as it is a non-flammable, low-odor liquid → It is safe as it is non-flammable. Exempt from Fire Service Act regulations. No need for hazardous material storage, hazardous material handling manuals, or explosion-proof equipment, and quantity management is unnecessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Completes drying at room temperature in 5-20 minutes after application → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ The pot life is semi-permanent. Zero waste. ■ Repairs are possible after coating.