フロロテクノロジー List of Products and Services

"FluoroSurf" and "Mold-Free" provide excellent non-stick release properties to metal surfaces when applied. Please try it if conventional release agents do not work. PFAS-regulated substances are not used. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing for continuous release even when conventional release agents fail. ■ The film thickness is just a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ FluoroSurf can be applied with a brush or spray gun, while Mold-Free can be applied directly from an aerosol can. Application is completed in 10 minutes at room temperature, eliminating the need for external processing like baked fluororesin. ■ There is no accumulation of dirt on the mold, and no transfer to the workpiece, eliminating the need for cleaning processes. (Excluding Mold-Free MF-02S) ■ It is also effective in improving resin flow. ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable, thus not classified as a hazardous material under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【Issues】 ■ It must be a PFOA-compliant product that can maintain the dispersion of PTFE similar to C8 types over the long term. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

"FloroSurf FG-5093" is a metal dry lubrication coating agent made by dissolving a special lubricating fluororesin in a non-flammable fluorinated solvent. When applied to a metal surface with a brush or spray, a dry lubrication film bonds to the surface with approximately 10 minutes of room temperature drying, forming a durable low-friction surface at the nanometer level. [Features] - The bonded lubrication film is durable. - It does not affect the material of the drive belt. - Heat resistance up to 200°C. - Unlike lubricating oils, it does not contaminate the surroundings. - Reapplication can be done easily with just a topcoat! Other examples are also available! *If you would like a free sample (limited to corporations), please include "Sample Request" in your inquiry.

【Issue】 ■ Achieve dirt resistance without changing the appearance of the material with a transparent film! ■ Easy application on-site and air dries at room temperature ■ Durability of over one year The FluoroSurf FG-5000 series offers a durable dirt-resistant coating! A dirt-resistant coating is a treatment that protects products from dirt. Cooking utensils and furniture can accumulate various stains such as fingerprints and water marks over long-term use. However, by applying a dirt-resistant coating, dirt removal becomes easier, reducing the hassle of daily maintenance. Other examples are also available! *If you would like a free sample, please include "Sample Request" in your inquiry. (This is for wholesale only. We do not sell to individuals.)

Anti-fouling coating refers to a treatment that protects products from dirt. Faucet fixtures can easily accumulate scale from the water, making it difficult to remove. Even aesthetically pleasing faucets can be ruined by scale and fingerprint stains, which detracts from their design. However, by applying an anti-fouling coating, dirt can be easily removed, reducing the hassle of daily maintenance. 【Reasons to Choose FluoroSurf FG-5093】 ■ Dirt can be easily removed thanks to the effects of fluorine ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and air dries at room temperature ■ Durability of over one year ■ When the effect diminishes, reapplication can easily restore performance. Other examples are also available! *If you would like a free sample, please include "Sample Request" in your inquiry.

Anti-fouling coating refers to a treatment that protects products from dirt. Cooking utensils and machinery accumulate various types of dirt over prolonged use. In elevators, fingerprints on the control panel and door areas can be a concern. If this dirt is left unattended, it not only affects the appearance but can also hinder the original performance, and in the worst case, rust may develop. By applying anti-fouling coatings like FluoroSurf FG-5093, dirt removal becomes easier, thus reducing the effort required for daily maintenance. **Problems Solved by Anti-Fouling Coating** - Hard to leave fingerprints and easy to wipe clean - Does not alter the texture of stainless steel Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.*

FloroSurf FS-702X can be added in small amounts to radical polymerization type hard coatings to impart anti-fouling properties and low refractive index. As a practical example, it is used in plastic-type touch panels and polarizers for liquid crystal displays. *If you would like a free sample, please include "Sample Request" in your inquiry.

Anti-fouling coating refers to a treatment that protects products from dirt. Cooking utensils and machinery accumulate various types of dirt over prolonged use. If this dirt is left unattended, it can hinder the product's original performance, and in the worst case, it may lead to product failure. However, by applying an anti-fouling coating, the removal of dirt becomes easier, thus reducing the hassle of daily maintenance. [Introduction to Background] ■ A durable anti-fouling coating agent is needed without changing the appearance. ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are prominent on stainless steel control panels and inner doors. ■ Improvement of light transmittance and fingerprint prevention for films used on displays. *If you would like a free sample, please include "Sample Request" in your inquiry.

The "Fluoro Surf NL Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. [Challenge] - We want to increase throughput. *If you would like a free sample, please include "Sample Request" in your inquiry.

FluoroSurf/Mold Free, when applied to nozzles and dies, forms a fluorine-based film on the metal surface, providing slip and non-stick properties. This film adheres strongly to the metal, effectively reducing melt fracture, sharkskin, and streaking continuously. When the effectiveness diminishes, reapplication with a brush or spray will restore its performance. There is no need to remove old components. It is non-flammable, so you can use it with peace of mind. It does not contain substances subject to PFAS regulations (such as PFOS, PFOA, etc.). *Free samples are currently available. If you would like one, please include "Sample Request" in your inquiry.

【Issue】 - Currently, the yield rate is 0%. No good products can be obtained with conventional release agents. We want to achieve continuous molding for at least 1000 shots. 【Solution】 Using "Fluorosurf FG-5093" makes it possible to mass-produce 1000 shots! Additionally, cleaning of the molded products is unnecessary, significantly improving process efficiency! Fluorosurf FG-5093 reduces the adhesion of the molding resin to the surface when applied to the mold, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It proves effective in cases where conventional release agents fail to work properly. It has excellent durability, with a track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【 Case Study in Thin CFRP Molding 】 1. Background Introduction In the thin molding of carbon fiber, such as fuel cell separators, conventional release agents caused cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1000 shots became possible, and mass production was confirmed. Additionally, there is no transfer to the molded product, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

Anti-fouling coating refers to a treatment that protects products from dirt. Faucet fixtures can easily accumulate scale from water, making it difficult to remove. Even aesthetically pleasing faucets can be ruined by scale and fingerprint stains, which detracts from their design. However, by applying an anti-fouling coating, dirt can be easily removed, reducing the hassle of daily maintenance. 【Reasons to Choose FluoroSurf FG-5093】 ■ Dirt can be easily removed thanks to the effects of fluorine ■ Durability of over one year ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and dries at room temperature ■ Non-flammable and low-odor, ensuring safety during application ■ When effectiveness decreases, reapplication is simple for performance recovery Other examples are also available! *If you would like a free sample, please include "Sample Request" in your inquiry.

It can be easily applied with a transparent film, providing long-lasting (over one year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. FluoroSurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

"Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. By applying it, the adhesion of the surface molding resin is reduced, and a layer of fluorine compounds at the nanometer level exhibits excellent release properties even for complex and precise shapes. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

"FloroSurf FG-5093" is a mold release agent that dissolves a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It has outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, the release agent components do not adhere to the molded products, eliminating the need for cleaning. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it to the mold with a brush or spray and allowing it to dry at room temperature for about 10 minutes, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release for thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. 【Features】 ■ Strongly adheres in reaction to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment and easy management *If you would like a free sample, please include "Sample Request" in your inquiry.

Anti-fouling coating refers to a treatment that protects products from dirt. It allows for easy removal of fingerprints, grease stains, and water spots. It helps reduce the hassle of daily maintenance. 【It is effective in the following cases】 ■ Want to easily remove fingerprints from surfaces ■ Aim to reduce cleaning time ■ Need a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are noticeable on stainless steel control panels and inner doors. ■ Improve the transmittance of films used on displays, prevent fingerprints, and enhance slip resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of the molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability, with proven continuous release performance over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes, eliminating the need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce surface defects. *If you would like a free sample, please include "Sample Request" in your inquiry.

FloroSurf FG-5093 is a surface treatment agent (coating agent) that imparts anti-fouling properties to metal surfaces with a transparent thin film. It makes the removal of dirt, such as fingerprints and tape residue, easier, thus reducing the hassle of daily maintenance. * Since the anti-fouling components bond and react with the metal surface, the performance is maintained for a long period (over six months). * As it is a transparent thin film treatment agent, it does not alter the texture of the material. * Application is simple; just wipe with a cloth or sponge soaked in the coating liquid at room temperature. After application, leave it to air dry for about 10 minutes. * When performance begins to degrade, reapplication will restore its effectiveness. * It is non-flammable and low-odor, making the application safe. * For those who wish to receive a free sample, please include "Sample Request" in your inquiry.

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents fail to work. It has outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication using a brush or spray can restore its performance. 【Case Study in Thin CFRP Molding】 1. Background Introduction In the thin molding of carbon fiber, such as separators for fuel cells, conventional release agents caused cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1,000 shots became possible, leading to the decision for mass production. Additionally, there is no transfer to the molded products, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

【Issue】 - Currently, mold release occurs after 5-10 minutes of continuous operation. We would like to extend this to approximately 60 minutes if possible. 【Solution Example】 By applying 'FloroSurf FG-5093' to the nozzle, continuous molding for 120 minutes becomes possible! FloroSurf FG-5093 is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.

"FloroSurf FG-5097" is a release agent specifically developed for polyurethane foam molding. It solves the surface roughness commonly associated with fluorine-based release agents in polyurethane molded products! Just one application provides a non-stick surface to the mold. The adhesion of the molded resin to the mold is reduced, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. 【Features】 ■ It strongly adheres to the mold material, enabling continuous release. ■ It can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for outsourcing processing. ■ Reapplication is also easy. ■ Low odor and non-flammable. It helps maintain a good working environment and is not subject to fire safety regulations or occupational safety and health laws. *If you would like a free sample, please include "Sample Request" in your inquiry.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. After application, a non-stick property is imparted to the mold surface within 5 minutes of air drying at room temperature. The adhesion of the molded resin to the mold is reduced, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, with a 10-minute air drying time at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce flash. *If you would like a free sample, please include "Sample Request" in your inquiry.

The "Fluoro Surf FG-5093/5095 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce streaking. *If you would like a free sample, please include "Sample Request" in your inquiry.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. Additionally, it does not contain any PFAS regulated substances. With just one application, the adhesion of the surface molding resin is reduced, demonstrating excellent continuous release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the die of extrusion molding can also reduce haze. *If you would like a free sample, please include "Sample Request" in your inquiry.

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. Fluorosurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, ensuring that molded products remain clean and do not require washing. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

"FloroSurf FG-5090" is a fluorine-based release agent for molds. It can be easily applied and demonstrates improved release properties even in cases where it is difficult to release from fluororesin-coated molds. Fluororesin-coated molds are challenging to coat with oil-based or silicone-based release agents, but FloroSurf FG-5090 spreads uniformly on the fluororesin surface and exhibits excellent release properties. 【Features】 ■ Strongly adheres to mold materials, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ Can be easily applied with brushes or spray guns, and the application is completed in 10-15 minutes of air drying at room temperature. Outsourcing of processing is not required. ■ Low odor and non-flammable, maintaining a good environment on-site. ■ Does not contain regulated substances such as PFOS, PFOA, or PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, preventing contamination of molded products and eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to perform. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modification ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer coatings and silicone release agents. When conventional release agents fail to release ⇒ We solve the problem with outstanding release performance. When you want to improve continuous release properties ⇒ Continuous release properties will be enhanced. "FloroSurf" features nano-level release components that bond tightly to the mold surface ⇒ It provides strong release and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins, elastomers, and fragile thin-walled products. ~ We are offering free samples exclusively for businesses! ~ Please select "Request Sample" via the [Contact Button] below.

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer processing and silicone release agents. When conventional release agents fail to provide release or you want to improve continuous release properties, this is where it shines. "FloroSurf" bonds tightly to the mold surface with a nanometer-level ultra-thin film, imparting strong non-stick and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins and elastomers, and fragile thin materials. ～ We are offering free samples exclusively for corporate clients! ～ Please indicate "Sample Request" when you contact us using the button below.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application grants a non-stick property to the mold surface. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with brushes or spray guns, with a drying time of 10 minutes at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce haze. Free samples are available for trial (limited to corporations)! Feel free to request.

"Fluoro Surf FG-5093 Series" Numerous achievements with blades such as Thomson blades and scissors! After applying with a brush or spray and wiping, a non-stick property is imparted to the surface of the metal blade after leaving it at room temperature for 10 minutes, making it difficult for adhesives and tapes to adhere. The fluororesin, at a film thickness at the nanometer level, reacts and adheres tightly to the surface, providing excellent durability. When performance degrades, reapplication will restore the performance. It can be easily processed in-house, allowing for significant cost reductions compared to traditional fluororesin processing. 【Features】 ■ Reacts with blade materials for strong adhesion, allowing for continuous use. ■ The film thickness is only a few nanometers, which does not negatively affect the sharpness of the blade. ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ Not classified as an organic solvent. Low odor and non-flammable. Maintains a good working environment, and management items required by fire safety and occupational health laws (quantity management, organic inspections, environmental measurement reports) are not necessary. *If you would like a free sample, please include "Sample Request" in your inquiry.

"Fluoro Surf FG-5093 Series" Numerous achievements with blades such as Thomson blades and scissors! After applying with a brush, spray, or cleaning cloth and leaving it at room temperature for 10 minutes, a non-stick property is imparted to the surface of the metal blade, making it difficult for adhesives and tapes to adhere. The fluororesin reacts and adheres tightly to the surface at a film thickness on the nanometer level, providing excellent durability. Even when performance degrades, reapplication will restore the performance. It can be easily processed in-house, allowing for significant cost reductions compared to traditional fluororesin processing. 【Features】 ■ Reacts with blade materials and adheres strongly, allowing for continuous use. ■ The film thickness is only a few nanometers, so it does not negatively affect the sharpness of the blade. ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ Not classified as an organic solvent. Low odor and non-flammable. Maintains a good working environment, eliminating the need for management items specified by fire laws and safety regulations (quantity management, organic inspections, environmental measurement reports). *If you would like a free sample, please include "Sample Request" in your inquiry.

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. Fluorosurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. FluoroSurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nanoimprinting ■ Easily applied with a brush or spray gun, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good environment on-site By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to businesses)! Please feel free to request.

A transparent fluororesin film forms on the glass surface, providing a long-lasting (over 1 year) effect in reducing fingerprint adhesion. ■ A durable anti-fouling coating that does not change the appearance ■ Just soak a cloth and wipe! ■ Non-flammable and low-odor, making it safe to apply in stores. ■ When the effect diminishes, simply wipe again as is. FluoroSurf FG-5084 is also used to prevent dirt on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

A transparent fluororesin film forms on the glass surface, providing a long-lasting (over 1 year) reduction in fingerprint adhesion. ■ A durable anti-fouling coating that does not change the appearance ■ Just soak a cloth and wipe! ■ Non-flammable and low-odor, making it safe to apply in stores. ■ When the effect diminishes, simply wipe again as is. FluoroSurf FG-5084 is also used to prevent dirt on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that it does not contaminate molded products, eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts exceptional durability, with proven performance for continuous release over thousands of shots, and reapplication using a brush or spray can restore its effectiveness. **Features** - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modifications. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.*

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, preventing contamination of molded products, and eliminates the need for cleaning the molded items. No regulated substances such as PFOS or PFOA are used. Additionally, it is not classified as a VOC. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts excellent durability, with proven continuous release performance over thousands of shots, and reapplication with a brush or spray can restore its effectiveness. 【Features】 - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modification. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano-imprinting ■ Can be easily applied with brushes or spray guns, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to corporations)! Please feel free to request.

By applying an anti-fouling coating, fingerprints, oils, and water stains become less likely to adhere, making them easy to remove. This helps reduce the hassle of daily maintenance. 【This is effective in the following cases】 ■ Want to easily remove fingerprints from touch panel surfaces ■ Want to improve the sliding ability of touch panels and enhance the user experience ■ Aim to reduce cleaning time for fingerprints and dirt ■ Need a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are prominent on stainless steel control panels and inner doors. ■ Improve the light transmittance of films used on displays and prevent fingerprints. ■ Increase sliding ability during operation. *If you would like a free sample, please include "Sample Request" in your inquiry.