フロロテクノロジー List of Products and Services

The "FloroSurf FG-3650 Series" electronic circuit board protective coating (conformal coating) is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → No need for environmental measurements in the workplace or organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle, keeping the workplace clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs can be made after coating. *If you would like a free sample, please contact us.

• Coating Agent

The "FloroSurf FG-3650 Series" electronic circuit board protective coating (conformal coating) is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational safety and health law. → This eliminates the need for environmental measurements in the workplace and organic solvent health checks for workers. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle, keeping the workplace clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs can be made after coating. *Please contact us if you would like a free sample.

• Coating Agent

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane-based, acrylic-based, and silicone-based coatings, its moisture resistance is more than 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for insulating protection and waterproofing of electronic components and mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety and health law restrictions. Compared to urethane, acrylic, and silicone-based insulating coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational safety and health law. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in just 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent, resulting in zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

• Coating Agent

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer processing and silicone release agents. When conventional release agents fail to provide release or you want to improve continuous release properties, this is where it shines. "FloroSurf" bonds tightly to the mold surface with a nanometer-level ultra-thin film, imparting strong non-stick and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins and elastomers, and fragile thin materials. ～ We are offering free samples exclusively for corporate clients! ～ Please indicate "Sample Request" when you contact us using the button below.

• Other molds

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application grants a non-stick property to the mold surface. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with brushes or spray guns, with a drying time of 10 minutes at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce haze. Free samples are available for trial (limited to corporations)! Feel free to request.

• Coating Agent

"Fluoro Surf FG-5093 Series" Numerous achievements with blades such as Thomson blades and scissors! After applying with a brush or spray and wiping, a non-stick property is imparted to the surface of the metal blade after leaving it at room temperature for 10 minutes, making it difficult for adhesives and tapes to adhere. The fluororesin, at a film thickness at the nanometer level, reacts and adheres tightly to the surface, providing excellent durability. When performance degrades, reapplication will restore the performance. It can be easily processed in-house, allowing for significant cost reductions compared to traditional fluororesin processing. 【Features】 ■ Reacts with blade materials for strong adhesion, allowing for continuous use. ■ The film thickness is only a few nanometers, which does not negatively affect the sharpness of the blade. ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ Not classified as an organic solvent. Low odor and non-flammable. Maintains a good working environment, and management items required by fire safety and occupational health laws (quantity management, organic inspections, environmental measurement reports) are not necessary. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The "Fluorosurf FG-3650 Series" electronic substrate protective coating (conformal coating) has numerous achievements in waterproofing and insulation protection for automotive substrates and electronic components, as well as in moisture-proof and waterproof coatings for mounted substrates. 【Performance Features】 ■ Higher moisture and waterproof properties compared to other resins! → It offers four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits over ten times the moisture-proof performance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the substrate during electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ In reactive coatings (silicone, UV acrylic, etc.), unreacted components remain and affect properties. This product does not retain unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failures in electrical connections after application. ■ A model with fluorescent dye for application confirmation is also available. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law restrictions. Compared to urethane, acrylic, and silicone-based coatings, it offers 3 to 10 times better moisture resistance (at the same film thickness). It provides protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the Manufacturing Environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations, eliminating the need for explosion-proof equipment and quantity management. ■ Not classified as an organic solvent under occupational health and safety law. → No need for environmental measurements in the workplace or organic solvent health checks for workers. ■ Cures at room temperature in 5-20 minutes after application. → No special equipment like heating furnaces is necessary. ■ Low viscosity makes it easy to handle, and it does not dirty the workplace. ■ The pot life is virtually permanent, resulting in zero waste. ■ Repairs can be made after coating. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic substrates, "FloroSurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating (conformal coating) of mounted substrates. ▼ Excellent performance of FloroSurf FG-3650 Series High moisture and waterproof properties / Resistant to lithium battery electrolyte / Acid and oxidation gas resistant High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ～ Free samples are available exclusively for corporate clients! ～ Please indicate "Sample Request" using the [Contact Button] below.

• Coating Agent

"Fluoro Surf FG-5093 Series" Numerous achievements with blades such as Thomson blades and scissors! After applying with a brush, spray, or cleaning cloth and leaving it at room temperature for 10 minutes, a non-stick property is imparted to the surface of the metal blade, making it difficult for adhesives and tapes to adhere. The fluororesin reacts and adheres tightly to the surface at a film thickness on the nanometer level, providing excellent durability. Even when performance degrades, reapplication will restore the performance. It can be easily processed in-house, allowing for significant cost reductions compared to traditional fluororesin processing. 【Features】 ■ Reacts with blade materials and adheres strongly, allowing for continuous use. ■ The film thickness is only a few nanometers, so it does not negatively affect the sharpness of the blade. ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ Not classified as an organic solvent. Low odor and non-flammable. Maintains a good working environment, eliminating the need for management items specified by fire laws and safety regulations (quantity management, organic inspections, environmental measurement reports). *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. Fluorosurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. FluoroSurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating can impart functionalities such as anti-soiling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine components rise to the surface of the hard coating and exhibit their functions, and during UV irradiation, they co-polymerize with the components of the hard coating to become integrated. By integrating, this product's functionality possesses abrasion resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating can impart functionalities such as anti-soiling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine components rise to the surface of the hard coating and exhibit their functions, and during UV irradiation, they co-polymerize with the components of the hard coating to become integrated. By integrating, this product's functionality possesses abrasion resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nanoimprinting ■ Easily applied with a brush or spray gun, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good environment on-site By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to businesses)! Please feel free to request.

• Coating Agent

A transparent fluororesin film forms on the glass surface, providing a long-lasting (over 1 year) effect in reducing fingerprint adhesion. ■ A durable anti-fouling coating that does not change the appearance ■ Just soak a cloth and wipe! ■ Non-flammable and low-odor, making it safe to apply in stores. ■ When the effect diminishes, simply wipe again as is. FluoroSurf FG-5084 is also used to prevent dirt on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

A transparent fluororesin film forms on the glass surface, providing a long-lasting (over 1 year) reduction in fingerprint adhesion. ■ A durable anti-fouling coating that does not change the appearance ■ Just soak a cloth and wipe! ■ Non-flammable and low-odor, making it safe to apply in stores. ■ When the effect diminishes, simply wipe again as is. FluoroSurf FG-5084 is also used to prevent dirt on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that it does not contaminate molded products, eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts exceptional durability, with proven performance for continuous release over thousands of shots, and reapplication using a brush or spray can restore its effectiveness. **Features** - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modifications. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.*

• Coating Agent

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law restrictions. Additionally, it does not use PFAS regulated substances such as PFOS and PFOA. 【Performance Features】 ■ Higher moisture-proof and waterproof properties compared to other resins! → It offers four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. It minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances such as the electrolyte of lithium batteries! → It can protect the substrate during electrolyte leakage, preventing fire accidents. ■ It demonstrates strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, preventing contamination of molded products, and eliminates the need for cleaning the molded items. No regulated substances such as PFOS or PFOA are used. Additionally, it is not classified as a VOC. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts excellent durability, with proven continuous release performance over thousands of shots, and reapplication with a brush or spray can restore its effectiveness. 【Features】 - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modification. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

When FluoroSurf FG-5093 is applied to metal, it imparts non-stick properties to the surface. Non-stick means that tape, adhesives, and other dirt are less likely to stick and can be easily removed. When applied to cutting tools such as scissors, utility knives, and cutting blades, it prevents adhesive materials from sticking to scissors during the cutting of adhesive tape or medical bandages, significantly improving work efficiency. Moreover, this performance is durable, allowing it to maintain its effectiveness over a long period. Additionally, the coating film is an extremely thin film of about 10 nanometers, so it does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine makes it easy to remove dirt ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and air dries at room temperature ■ Durability of over one year ■ If the effect diminishes, reapplication is easy to restore performance Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano-imprinting ■ Can be easily applied with brushes or spray guns, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to corporations)! Please feel free to request.

• Coating Agent

By applying an anti-fouling coating, fingerprints, oils, and water stains become less likely to adhere, making them easy to remove. This helps reduce the hassle of daily maintenance. 【This is effective in the following cases】 ■ Want to easily remove fingerprints from touch panel surfaces ■ Want to improve the sliding ability of touch panels and enhance the user experience ■ Aim to reduce cleaning time for fingerprints and dirt ■ Need a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are prominent on stainless steel control panels and inner doors. ■ Improve the light transmittance of films used on displays and prevent fingerprints. ■ Increase sliding ability during operation. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The simplified fluorine coating exhibits strong non-stick properties. By applying the coating, it becomes difficult for adhesives to adhere, and it also reduces dirt such as fingerprints, grease, and water stains. Furthermore, it can be easily removed. This can save you the hassle of daily maintenance. 【This is effective in the following cases】 ■ Preventing adhesive from sticking to metal knives and scissors ■ Ensuring that tape does not stick to the blade when cutting adhesive tape ■ Making it easier to remove scale from faucet fixtures ■ Wanting to easily remove fingerprints from touch panel surfaces ■ Improving the slip properties of touch panels to enhance the user experience ■ Aiming to reduce cleaning time for fingerprints and dirt ■ Needing a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adhering to metal surfaces and becoming difficult to remove ■ Fingerprints being noticeable on stainless steel control panels and inner doors ■ Improving the transmittance of films used on displays and preventing fingerprints ■ Enhancing slip properties during operation *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The simple fluorine coating exhibits strong non-stick properties. By applying the coating, it becomes difficult for adhesives to adhere, and it also reduces dirt such as fingerprints, grease, and water stains. Furthermore, it can be easily removed. This helps to eliminate the hassle of daily maintenance. 【It is effective in the following cases】 ■ Preventing adhesive from sticking to metal knives and scissors ■ Ensuring that tape does not stick to the blade when cutting adhesive tape ■ Making it easier to remove scale from faucet fixtures ■ Wanting to easily remove fingerprints from touch panel surfaces ■ Improving the slip properties of touch panels to enhance the user experience ■ Aiming to reduce cleaning time for fingerprints and dirt ■ Needing a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adhering to metal surfaces and becoming difficult to remove ■ Fingerprints being noticeable on stainless steel control panels and inner doors ■ Improving the light transmittance of films used on displays and preventing fingerprints ■ Enhancing slip properties during operation *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The "FloroSurf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. It does not contain PFAS regulated substances (such as PFOS and PFOA). Just one application provides a non-stick surface to the mold. It demonstrates excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nanoimprinting. ■ Easily applied with a brush or spray gun, drying at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095). ■ Low odor and non-flammable, maintaining a good environment on-site (excluding aerosol types). ■ Applying it to the nozzle of extrusion molds reduces defects like blushing and melt fracture. Free samples are available for trial (limited to corporate clients)!

• Coating Agent

The coating agent for substrates (conformal coating) "Fluorosurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from the restrictions of fire laws and safety regulations. Furthermore, no PFAS regulated substances such as PFOS, PFOA, or PFHxS are used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. ■ Compared to other resins, it has high moisture and waterproof properties. → It has four times the moisture resistance performance compared to urethane or acrylic moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in case of electrolyte leakage, preventing fire accidents. ■ It also exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, providing rust prevention effects. ■ It does not contain unreacted low molecular compounds like silicone or UV-curable types, ensuring high reliability. It will not cause contact failure of electrical contacts after application.

• Coating Agent

By applying an anti-fouling coating, fingerprints, oils, and water stains become less likely to adhere and can be easily removed. This helps reduce the hassle of daily maintenance. 【This is effective in the following cases】 ■ Want to easily remove fingerprints from touch panel surfaces. ■ Want to improve the smoothness of the touch panel and enhance the user experience. ■ Aim to reduce the cleaning time for fingerprints and dirt. ■ Need a durable anti-fouling coating that does not change the appearance. ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are noticeable on stainless steel control panels and inner doors. ■ Improve the light transmittance of films used on displays and prevent fingerprints. ■ Increase smoothness during operation. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all with a thin film coating! It is ideal for waterproofing and insulating protection of electronic components, as well as moisture-proof and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations, and it contains no PFOS or PFOA. 【Performance Features】 ■ High moisture and water resistance → Offers 4 times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits over 10 times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes → Can protect the circuit board during electrolyte leakage, preventing fire accidents. ■ Provides powerful protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ Does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• Coating Agent

Conformal Coating (Protective Coating for Electronic Circuit Boards) "Fluorosurf FG-3650 Series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not contain organic solvents (VOC), making it free from fire safety laws, occupational safety and health laws, and VOC regulations. Furthermore, our products do not use PFOS or PFOA at all. 【Performance Features】 ■ High resistance to acidic substances such as the electrolyte of lithium batteries → Protects the circuit board in case of electrolyte leakage, preventing fire accidents. ■ Higher moisture-proof and waterproof properties compared to other resins → Provides four times the moisture-proof performance compared to urethane or acrylic moisture-proof coatings at the same film thickness! Exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ Exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

• Coating Agent

The protective coating agent for electronic circuit boards (conformal coating) "Fluorosurf FG-3650 series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating. It has numerous achievements in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations. Additionally, it does not contain any PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has four times the moisture-proof performance! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Since it does not contain low molecular compounds, it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, leak prevention, and moisture-proof and waterproof coatings for mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety law restrictions. Additionally, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It has four times the moisture resistance performance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimal, making it ideal for lightweight mobile devices. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in case of electrolyte leakage, preventing fire accidents. - It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. - It does not contain low molecular compounds like silicone, which can cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• Coating Agent

Conformal Coating (Protective Coating Agent for Electronic Circuit Boards) "FloroSurf FG-3650 Series" is ideal for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards and leak prevention for narrow pitch patterns. It is non-flammable and does not contain organic solvents (VOC), making it free from fire safety laws, occupational safety and health laws, and VOC regulations. Additionally, PFOS and PFOA are not used at all. 【Performance Features】 ■ High resistance to acidic substances such as the electrolyte of lithium batteries → Can protect the circuit board during electrolyte leakage, preventing fire accidents. ■ Superior moisture-proof and waterproof properties compared to other resins → Provides four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings at the same film thickness! Exhibits over ten times the moisture-proof performance compared to silicone-based coatings. Minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention. ■ Does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. ■ A model with fluorescent dye for application verification is also available. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not contain VOC organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Furthermore, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It has 4 times the moisture resistance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in the event of electrolyte leakage, preventing fire accidents. - It also exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, providing rust prevention effects. - It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating. It has a proven track record in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted circuit boards. It is non-flammable and not classified as an organic solvent, thus free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Additionally, it does not contain any PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → It offers four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances like lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ It does not contain low molecular compounds, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• Coating Agent

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating! It has numerous achievements in waterproofing and insulation protection of electronic components, as well as moisture and waterproof coatings for mounted substrates. It is non-flammable and not classified as an organic solvent, thus free from regulations under fire safety laws and occupational safety and health laws. Additionally, it does not use any PFAS regulated substances such as PFOS, PFOA, or PFHxS. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has four times the moisture-proof performance! It exhibits more than ten times the moisture resistance compared to silicone-based coatings. The weight increase due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. ■ High resistance to acidic substances such as lithium battery electrolytes. → It can protect the substrate in the event of electrolyte leakage, preventing fire accidents. ■ It demonstrates strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ It does not contain low molecular compounds, so it will not cause contact failure of electrical contacts after application.

• Coating Agent

"FloroSurf" is a fluorine coating agent that can protect metals from hydrogen sulfide and prevent discoloration. A transparent fluorine film is formed at room temperature simply by applying it. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under fire safety and occupational health and safety laws. Additionally, our products do not contain any PFOS or PFOA. 【Performance Features】 It exhibits protective functions such as thin film resistance to hydrogen sulfide, moisture, saltwater, water, acids, lithium battery electrolyte, and water and oil repellency! ■ It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, as well as rust prevention. ■ It is insulating and can also be used to protect electronic circuit boards. ■ It has high resistance to lithium battery electrolytes. → It can protect circuit boards in the event of electrolyte leakage, preventing fire accidents. ■ It does not contain low molecular compounds like silicone, so it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

"FloroSurf FG-5090" is a coating agent that improves release properties by applying it to molds treated with fluororesin. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * It can be applied to molds treated with fluororesin and can be easily applied on the molding site using brushes or spray guns. * Just one application provides a non-stick surface to the mold, demonstrating excellent release properties even for complex and precise shapes. * There is no transfer or accumulation of dirt on the mold or workpiece. * It is non-flammable and does not fall under organic solvent regulations, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

When you apply FluoroSurf FG-5093 to cutting tools such as Thomson blades, scissors, utility knives, and push-cut blades, these adhesives do not stick during cutting, significantly improving work efficiency. Moreover, this performance is durable, allowing it to maintain its effectiveness over a long period. Additionally, the coating film is transparent and extremely thin, about 10 nanometers, which does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine makes it difficult for adhesives and tapes to stick. ■ Transparent thin film (at the nanometer level) has minimal impact on appearance. ■ Can be easily applied in our own factory production sites and only requires room temperature drying. ■ When the effect diminishes, simple reapplication restores performance easily. ■ Non-flammable and safe, with low odor. ■ Completely free of regulated PFAS substances such as PFOS, PFOA, and PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

• Other polymer materials

"FluoroSurf" features a fluororesin coating that forms at room temperature, exhibiting water and oil repellency, preventing the rise (diffusion) of grease and flux during soldering, preventing fingerprint adhesion, and offering various benefits such as dirt resistance, lubrication, and release properties. We provide free samples for testing (shipping charges are to be paid on delivery). [Features] - A special fluororesin is dissolved in non-flammable fluorinated solvents or organic solvents to create a solution. - Easy coating with brushes or immersion. Dries in 5 to 15 minutes at room temperature. - After drying, a transparent, thin film of fluororesin is formed, demonstrating effectiveness in dirt resistance, water repellency, and moisture resistance. - No regulated substances such as PFOS, PFOA, or PFHxS are used. [Effective for the following applications!] - Preventing flux rise during soldering - Waterproof and moisture-proof protective coating for printed circuit boards - Coating resistant to lithium electrolyte - Preventing fingerprint adhesion on displays and lenses - Preventing oil leakage from miniature motors and spindle motor bearings - Stopping the flow of sealing resin *If you would like a free sample, please include "Sample Request" in your inquiry.

• paint

The "Fluoro Surf FG-509X" is a surface treatment agent that allows for fluorine processing on the surface by applying it to resin-molded molds, enabling continuous release. It can be easily applied on-site using a brush, spray gun, or wiping. After application, it dries at room temperature in just 2 minutes. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * This surface treatment bonds to the mold surface, creating a durable release film that allows for continuous release. * It can also be applied to molds that have been conventionally fluorinated, further improving release properties. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * It is non-flammable and does not contain organic solvents, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. A water-based model "FG-505W" is also available as a VOC countermeasure model. * There is no need to remove the residual film during reapplication; you can simply apply another layer. * It has good gas release properties, reduces gas staining, and improves flow. * If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using a brush or spray gun. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * Applying it to the nozzle of extrusion molds can also reduce blushing. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

• Coating Agent

The fluorine coating agent "Fluorosurf" forms a transparent fluororesin film at room temperature, providing various benefits such as acid protection, water and oil repellency, prevention of grease migration (diffusion), fingerprint adhesion prevention, dirt resistance, lubrication, and release properties. 【Effective for the following applications!】 ■ Prevention of metal sulfide and oxidation ■ Protection of metals and resins from acids generated in fuel cells and lithium batteries. ■ Rust prevention for metals around batteries ■ Coating resistant to lithium electrolyte ■ Prevention of fingerprint adhesion on displays and lenses ■ Prevention of oil leakage from miniature motors and spindle motor bearings ■ Stopping the flow of sealing resins ■ Insulating and moisture-proof coating for electrical circuits ■ Prevention of leaks in electrical circuits ■ Release agent for molds used in resin and elastomer molding 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorine-based solvent to create a solution. ◯ Easy coating by brush or immersion. It dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a transparent thin film of fluororesin is formed, exhibiting properties such as dirt resistance, water repellency, and moisture resistance. 〇 PFAS regulated substances PFOS, PFOA, and PFHxS are not used at all. *If you would like a free sample, please include "Sample Request" in your inquiry.

• paint

フッ素コート剤「フロロサーフ」は、常温で形成されるフッ素樹脂皮膜が、撥水撥油、油脂類のはいあがり（拡散）防止・指紋付着防止・防汚：潤滑・離型など、さまざまなメリットを発揮します。 【特長】 〇PFAS規制物質　（PFOA PFOS PFHｘSなど）は不使用です。 ◯特殊なフッ素樹脂を不燃性のフッ素系溶剤に溶解し溶液化。 ◯刷毛や浸漬などで簡単コーティング。室温で5秒～15分で乾燥します。 ◯乾燥後は透明で薄膜のフッ素樹脂皮膜が形成され、防汚、撥水、防湿等の効力を発揮。 【こんな用途に効果を発揮！】 ■金属の硫化や酸化防止 ■耐リチウム電解液コーティング ■樹脂やエラストマー成型の金型離型剤 ■ディスプレイやレンズの指紋付着防止 ■ミニチュアモーター・スピンドルモーターの軸受け油流出防止 ■封止樹脂流れ止め ■電気回路の絶縁防湿コーティングリーク防止 ※無料サンプルご希望の方は、お問い合わせ内容に「サンプル希望」とご記載下さい。 ※なお、弊社製品は工業用化学製品のため個人用途（法人格のない場合）、医療用途、食品に触れる用途につきましては、サンプル提供をいたしかねます。

• paint