シュロニガージャパン List of Products and Services

Laselec's bench-top laser stripper Sylade (headquartered in Toulouse, France) offers highly efficient and safe laser technology. Laser stripping allows for processing internal conductors and core wires without causing any damage. The Sylade 7H is lightweight and portable. The operation is safe and simple – once you select the processing program, you just insert the wire. The stripping process automatically starts by pressing against the sensor.

• Other processing machines

Laselec's bench-top laser stripper Sylade (headquartered in Toulouse, France) offers highly efficient and safe laser technology. Laser stripping allows for processing internal conductors and core wires without causing any damage. The operation is safe and simple - once you select the processing program, you just need to insert the wire. The stripping process starts automatically by pressing against the sensor.

• Other processing machines

The "LAMBDA X" is a semi-automatic and fully automatic machine based on a modular design that performs contact production in multiple steps. By adopting a modular structure in the hardware, it enables efficient and intuitive operation through mechanical control and visualization. Additionally, each processing module can be freely integrated, allowing for the realization of line production tailored to the assembly requirements of different types of connectors and wires. 【Features】 ■ Space-saving design ■ Modular design allows for flexible expansion of processing levels ■ Capable of processing very short wires up to 90mm ■ Shortest cycle time of 4.5 seconds 【Applications】 ■ Processing coaxial cables for FAKRA standard connectors ■ Cable processing for high-speed data communication ■ High-voltage cables up to Ø 5 mm ■ Cable processing for automotive Ethernet connectors *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "Strip Series B340" is a rotary wire stripping machine that exhibits excellent repeatability and mechanical precision. Equipped with four rotating X-type blades, it can process thin wires with a cross-sectional area of 0.013 mm, as well as thick wires up to 16 mm and cables/multi-core cables with a diameter of up to 9 mm. Being rotary, it provides clean cuts and is also capable of twist processing. The stripping length is 80 mm, and the peeling length is 40 mm. 【Features】 ■ Equipped with a clear high-resolution 5-inch color touchscreen. ■ User-friendly interface allows for easy setting of processing data with minimal training time. ■ Compatible with various cables, eliminating the need for blade replacement tailored to specific cables! ■ No mechanical adjustments required when changing cables. ■ Ergonomically designed for ease of operation. *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Other processing machines

The "Strip Series B300" is a programmable wire stripping device that accommodates cables with a maximum diameter of 7mm. Designed with ergonomics in mind to reduce the burden of work. It features a user-friendly 5-inch color touchscreen that allows for intuitive programming, achieving high productivity. 【Features】 ■ High-resolution 5-inch color touchscreen ■ LED lights for better visibility of the entire workspace ■ High-sensitivity release mechanism suitable for thin and flexible cables ■ High process safety due to continuous axis monitoring ■ Function expansion through upgrade kits and options *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other processing machines

Our company manufactures the essential "Fully Automatic Length Measurement Cutting and Stripping Device" for wire processing, offering a range from entry-level models to higher-end models. Additionally, to promote the digitization and automation of control panel manufacturing, we propose a solution that combines the panel manufacturing support system "WIRE CAM DX" from ECAD Solutions with our fully automatic cable cutting and stripping device control software "Cayman." 【Benefits of the Combination】 ■ Wire processing data designed with "WIRE CAM DX" is linked to "Cayman" via I/F software ■ The I/F software is available for free ■ Automatic programming is performed, mechanizing and reducing labor in wire processing tasks ■ Quality improvement and lead time reduction are achievable ■ "Cayman" supports 10 languages, including Japanese and English *For details, please download the PDF or contact us.

• Plastic processing machines (cutting and rolling)

The "PowerStrip 9580" is a fully automatic cable length measurement, cutting, and stripping device that can easily process discrete wires, shielded cables, and complex multi-core wires with cross-sections of up to 70mm². We offer four basic models composed of combinations of functional modules (S/M/SR/MR). The functional modules can be applied to any basic model, allowing for easy expansion to a wide range of cable processing applications through the retrofitting or replacement of functional modules when the requirements for cable processing change. "PowerStrip 9580 S": Entry model equipped with a single blade cutter head "PowerStrip 9580 M": Model equipped with a multi-blade cutter head "PowerStrip 9580 SR": Coaxial processing model equipped with a single blade cutter head and a rotary cutter head "PowerStrip 9580 MR": High-end model equipped with a multi-blade cutter head and a rotary cutter head

• Plastic processing machines (cutting and rolling)

The "MegaStrip 9680" is a fully automatic cable length measurement, cutting, and stripping device that can easily process discrete wires, shielded cables, and complex multi-core wires with cross-sections of up to 120 mm² (with options for 240 to 300 mm²). There are two models: the "MegaStrip 9650M," which is equipped with a multi-cutter head that allows for simultaneous stripping of the jacket and inner conductors, and the "MegaStrip 9680MR," which adds a rotary cutting unit to the M type for precise processing of jackets and shielded cables. It comes standard with an interface for connecting peripheral devices, allowing it to work in conjunction with other equipment to create an efficient production line tailored to the customer's needs.

• Plastic processing machines (cutting and rolling)

The cable automatic cutting device "JumboCutter Series" is a product that automatically measures and cuts round cables with a maximum diameter of 20mm (JC4285), 30mm (JC4385), and 40mm (JC4485), as well as flat cables up to a maximum width of 85mm. We offer "control software" as an option, allowing for immediate cutting by selecting pre-set processing instruction data. By using a barcode reader to retrieve data, it enhances work efficiency in cell production while preventing mistakes. 【Configurable Items in Control Software】 ◎Identification Number ◎Product Name ◎Wire Material Name ◎Production Quantity ◎Cutting Length ◎Conveying Speed ◎Stop Time per Production Unit ◎Bundle Quantity and Stop Time ◎Temporary Stop Settings during Production (stop at a predetermined length or stop via external signal) *For more details, please refer to the PDF document or feel free to contact us.

• cable

We offer a "desktop wire stripping device" that contributes to the improvement and efficiency of wire stripping quality. From our extensive lineup, you can select products that match your applications and needs, such as cable size, strip length, and processing content. 【Recommended for those who:】 ■ Struggle with stripping "thick and hard" cables ■ Want to reduce the time required for wire stripping ■ Experience variability in processing quality ■ Find it cumbersome to change blades or adjust settings on wire stripping devices *You can view product materials from the "PDF Download." ★ We are currently accepting applications for demonstration demos and rental of demo machines! Please apply through the contact form.

• Pipe and cable cutters

Our company offers a wide range of 'Fully Automatic Cable Cutting and Stripping Machines' that contribute to the labor-saving and standardization of wire and cable processing. One of our products, the "MultiStrip 9480 M," features excellent expandability with the ability to mount up to three sets of blades. In addition to slitting and simultaneous stripping of multi-core wires, it can also handle processing of shielded wires and coaxial cables. 【Features of the "MultiStrip 9480 M"】 ■ Precisely processes cables with complete program control ■ Compatible with various types of insulated wires and cables ■ Intuitive operation via a 5.7-inch touchscreen ■ Easy setup changes with the use of a magnetic guide tube *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Pipe and cable cutters

The "UniStrip 2050" is a device for stripping multi-core cables with a maximum diameter of 15mm and wire sheaths of cable size 70mm² (2/0 AWG). In addition to its feature of being operated solely by air, it allows for very simple setup and operation. It comes with a full set of blade guides, making it suitable for a wide range of applications. Moreover, by sliding the stop back and forth, the strip length can be quickly and easily adjusted. 【Features】 ■ Simple setup and operability ■ Durable construction ■ Air-operated, so no power supply is needed ■ Three sets of four different sizes of circular blades ■ Full set of guides included *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

The "WireStacker 3150" is a high-performance active cable receiving device that accurately bundles cables. It supports lengths of 2.5m, 5m, 7.5m, and 10m. With a synchronized conveyor belt, it can stack cables with weak cores accurately without causing jams. Additionally, the batch tray allows for work to be performed during cable production. 【Features】 ■ Easy setup via a color touch screen ■ Synchronized with cable processing equipment for high-speed operation ■ Batch mode enables work for each batch ■ Cables can be retrieved without interrupting processing during production ■ Bundle settings can be freely programmed ■ Easy access to electronics and mechanical components for maintenance *For more details, please refer to the PDF document or feel free to contact us.

• Winding Machine

The "UniStrip 2550" is a wire stripping device that accommodates wires and jacketed cables ranging from 0.03 to 6 mm² (32 to 10 AWG) and with a maximum diameter of 5.5 mm. The strip length and pull length can be edited as needed, and processing programs can be saved in memory for easy retrieval at any time. By operating the color touch screen and simply selecting the wire size from the library, the necessary parameters for processing (cutting diameter, gripper pressure, way back, etc.) are automatically set. 【Features】 ■ User-friendly color touch screen ■ No mechanical adjustments required when using V-blades ■ High-sensitivity trigger sensor makes processing thin and fragile cables easy ■ Clear cover for easy visibility of processing conditions ■ Selectable blade options *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "ShieldCut 8100" is a device that can cut not only round cables but also braided shields of cables with irregular cross-sections. Equipped with a highly reliable drive unit and high-performance control software, it is capable of producing high-quality results that cannot be achieved with manual shielding processing. Additionally, the included standard guide set can accommodate a wide range of cable diameters. 【Features】 ■ Innovative processing concept ■ High versatility ■ Stable repeat processing accuracy ■ Intuitive interface for operation *For more details, please refer to the PDF materials or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "PreFeeder 4850" is a robust cable feeder compatible with cable reels weighing up to 600kg. It features an easy reel setup thanks to its shaftless design and allows for discharge speed control in conjunction with an accumulator. Additionally, it is equipped with monitoring functions, enhancing safety. 【Features】 ■ A supply system with high output and high reliability ■ Compatible with cable reels with a diameter of 1070mm and weighing up to 600kg ■ Three supply direction options available ■ Electric shaft for quick reel changes and simple operation ■ Safety circuits linked with downstream equipment via an interface *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "PreFeeder 4350" is a powerful cable feeding machine that supports cable reels weighing up to 400 kg. It features a simple design and easy operation, allowing for electric drive position adjustments and easy replacement of cable reels. The shaftless design enables easy reel setup, and it allows for discharge speed control in conjunction with an accumulator. 【Features】 ■ Compatible with cable reels up to 900 mm in diameter and weighing 400 kg ■ Choose from three types of feeding methods ■ Maximum reel rotation speed of 280 rpm, allowing connection with Schloniger's cut & strip machine and crimping center ■ Quick reel replacement and simple operation with an electric shaft ■ Safety circuits are linked with downstream equipment via an interface *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "PreFeeder 3200" is a self-contained, electric, and pneumatic pre-feeding device designed to supply wire and cable from a reel to downstream wire processing machines with the same tension. The outlet pendulum arm structure achieves operational characteristics tailored to the typical speed profile of the automatic wire processing machines used. The pendulum arm on the inlet side can smoothly accelerate the rotation of the spool during deceleration, allowing for cable accumulation. 【Features】 ■ Designed for easy operation and quick cable setup, enabling efficient work ■ Cable feeding control using a pendulum arm and sensor stand ■ Pendulum arm accumulator capable of accelerating the spool *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "PreFeeder 3300" is a compact cable feeder compatible with cable reels weighing up to 150 kg. It allows for reel position adjustment via electric drive, easy reel setup with a shaftless design, and speed control linked with an accumulator. Additionally, it is equipped with monitoring functions, ensuring high safety. 【Features】 ■ Compatible with cable reels up to 150 kg ■ Reel position adjustment through electric control ■ Easy reel setup with a shaftless design ■ Automatic feed adjustment linked with brakes ■ High safety achieved through monitoring functions *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "PreFeeder 2500" is a prefeeding device suitable for wires, thin cables, and tubes. It is capable of maintaining a low tensile force on the cables during high-speed feeding. This device comes in two versions, with a maximum reel weight of 40 kg or 80 kg, making it easy to integrate into processing lines. 【Features】 ■ One of the peripheral devices that can be linked with cable processing equipment ■ Adjustable feeding speed ■ Can minimize the tensile force on the cables ■ Enables high-quality, ultra-precise work with cable processing equipment ■ Reel replacement is very easy, saving time *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "PreFeeder 60" is a dynamic pre-feeder that can accurately and carefully feed cables into fully automatic cut, strip, and terminate devices. It draws cables from various types of containers and barrels. Additionally, it supports the Schloniger CrimpCenter model of fully automatic crimping devices with a high transport rate of 9m/s. 【Features】 ■ Gentle transport method ■ Controlled drive system with a maximum transport rate of up to 9m/s ■ Cable storage based on a swivel arm ■ Cable deflection and pulley unit *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "SJWS 800" is a conveyor-type cable receiving device that accurately handles the bundling of long-length wires and cables. Designed with a base module of 1.5m or 3.0m, it is also possible to configure a longer receiving device by connecting each module. This product can be controlled by all Schloniger fully automatic length measurement, cutting, and terminal stripping devices. 【Features】 ■ Conveyor-type device that accurately receives cables ■ Simple and easy-to-use entry model ■ Compatible with all Schloniger automatic length measurement, cutting, and terminal stripping devices ■ Handles difficult cables such as long-length cables without a waist ■ Supports various cable lengths through a modular extension concept *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "CoaxCenter 6000" is a fully automatic processing machine for fine wire coaxial cables, coaxial cables, and general wires. With the QCam 360 automatically monitoring strip quality, time-consuming visual quality checks after processing are completely unnecessary. Additionally, setup is simplified, allowing for quick and easy device configuration. The front and rear ends of the cable are processed simultaneously by stations on both sides. 【Features】 ■ Excellent strip precision ■ Automatic monitoring of strip quality ■ Traceability of production status ■ High flexibility ■ High productivity *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "CableCoiler 1450" is a single-pan winding device that can accurately wind wires, cables, and tubes. The winding pins can be adjusted to match the outer diameter of the cable being wound. An automatic safety cover lift opens, allowing for easy removal of the cable coil from the coiling disk. 【Features】 ■ Design that allows for easy removal of wound cables ■ Simple device setup and operation ■ Operation synchronized with upstream processing equipment ■ Quick changeover of pre-registered jobs ■ Two selectable modes - Winding only: Offline winding operation of pre-cut materials - Automatic winding: Automatic operation linked with a cut & strip machine *For more details, please refer to the PDF document or feel free to contact us.

• Winding Machine

The "CableCoiler 1400" is a single-pan winding device capable of accurately winding wires, cables, and tubes. With adjustable winding pins, it can wind cables of different outer diameters. The safety cover opens, allowing for easy removal of the cable coil when the winding pins are lowered. 【Features】 ■ Design that allows for easy removal of wound cables ■ Simple device setup and operation ■ Can be linked with cable processing equipment via an interface ■ Two modes available - Winding only: Cable winding operation without cable processing equipment - Automatic winding: Linked with cable processing equipment *For more details, please refer to the PDF document or feel free to contact us.

• Winding Machine

The "CableCoiler 500" is a lightweight single-pan cable winding device. It can be linked through an interface with the Schloniger fully automatic length measuring, cutting, and end stripping device. This innovative solution can improve production capacity and processing lines through flexibility, easy programming, and rational operation. 【Features】 ■ Adjustable cable winding speed ■ Winding time adjustment through "discharge time" control after cable cutting (only with WS/Postfeed interface) ■ Support for the new Schloniger WS/Postfeed interface ■ Easy optical sensor for interface connection without WS/Postfeed interface or for other companies' cutting and end processing devices ■ Welded height-adjustable steel base ■ Easy-to-move locking casters *For more details, please refer to the PDF document or feel free to contact us.

• Winding Machine

The "CrimpCenter 36 SP" is a fully automatic cable length measurement, cutting, and terminal processing device that achieves reduced setup time and improved effective performance. As a result, overall productivity is enhanced and takt time is shortened. Furthermore, new features such as optimization of the entire system, automation of traditional manual processes, and optimization of cable handling improve quality. 【Features】 ■ Achieves reduced setup time and improved effective performance ■ Overall productivity is enhanced and takt time is shortened ■ Supports a wide range of cable processing from 0.13 to 6 mm² (26 to 10 AWG) ■ Helps reduce production costs while achieving production plans more quickly *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

"Cayman" is a software program that allows online control of most Schloniger cutting and stripping machines, such as the PowerStrip 9500 series and OmniStrip 9450. With an easy-to-understand menu structure and graphic user interface, it enables quick and efficient programming of cable production instructions. By modifying independently registered and managed wire data and processing data, it is also possible to change already registered processing instruction data all at once. 【Features】 ■ Significantly reduces the time required for registering production instruction data ■ Operator support/programming support and WYSIWYG graphic display of registered cables (What You See Is What You Get) ■ Guide function for new data registration and modification tasks using a wizard screen ■ Management of operational scope based on different user levels ■ Standard interface for integration with external custom software (iCayman) *For more details, please refer to the PDF materials or feel free to contact us.

• cable

The "CableCoiler 1300" is a standalone type wire winding device that is fully synchronized with the Schloniger automatic length measurement, cutting, and terminal stripping machine. Settings can be easily configured on the touch panel screen. With two winding pans that alternate winding and simple setting operations, it achieves high productivity even in small lot production. 【Features】 ■ Suitable for standard cables, multi-core cables, and optical fiber cables ■ High productivity through a dual pan system that alternates winding ■ Capable of synchronized operation with high-functionality processing equipment ■ Intuitive touch screen operation that is easy to understand ■ Maintenance-free design *For more details, please refer to the PDF document or feel free to contact us.

• Winding Machine

The "Odyssey-7" is a 4-beam cable stripping device equipped with a UV laser. It can cut foil and braid of cables, as well as cut foil and dielectric from high-performance two-core cables. It features touch screen control and can store up to 99 programs. Additionally, it operates on single-phase 120/230VAC and does not require compressed air. 【Features】 ■ Compact tabletop size ■ Equipped with a small PC for control ■ No need for an external PC ■ Industrial-grade sealed laser for easy maintenance ■ Equipped with a 3W UV laser of laser safety class 4 *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Odyssey-4" is a stripping device for ultra-fine enamel cables that can be integrated into production sites with limited space due to its compact size. It strips enamel-coated cables used in industrial equipment, including medical devices. Additionally, it can strip at any position safely and without causing any damage, and without chemical treatment. 【Features】 ■ Space-saving: The machine can be integrated into production sites with limited space due to its compact size. ■ Uniqueness: Laser processing specialized for stripping enamel wires. ■ Reliability - Only the areas where the laser is applied vaporize and remove the enamel. - Processing leaves no residue. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Mercury-6" is a tabletop wire stripping laser system specially designed for stripping multilayer cables, such as high-voltage electric vehicle cables. It is equipped with an industrially sealed carbon dioxide laser customized for stripping multilayer cables with an outer diameter of up to 30mm. The 2D optical system features a rotating and linear slit axis, allowing for a maximum strip length of 200mm. It also includes a unique cable termination detection system that enables precise processing of strip lengths. 【Features】 ■ Versatile - Strips single multilayer conductor cables - Processes the outer insulation and the inner Mylar foil of electric vehicle cables ■ High-speed - Laser options of 20 to 70 watts - Automatic focus adjustment function - Outer diameters from 2 to 30mm, with a maximum linear slit speed of 250mm/second *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "GEMINI-4" is a precision laser wire processing system designed to process one cable at a time. By adopting fiber laser technology, it provides a suitable solution for applications such as shield cutting and enamel ablation. This product incorporates two high-speed galvanometer scanner technologies, achieving high-speed and high-precision control of laser light. It is capable of stripping, window cutting, slitting, and surface ablation processing. 【Features】 ■ Space-saving ■ Versatile ■ Reliability: Proven lasers and optical systems ■ High speed: Scanning speed of up to 2000 mm per second ■ Clean and high precision *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "Gemini-6" is a high-performance laser processing machine for cutting metal solid shields. It is an ideal solution for cutting the metal outer shells of small-diameter cylindrical parts, such as thermocouples for high-temperature measurement. It processes high-value-added components quickly and cleanly. It can quickly draw in a single wire/cable of stainless steel up to a maximum thickness of 1mm, with an outer diameter ranging from 1.5mm to 10mm and a slit length of up to 100mm. 【Features】 ■ Clean and high precision - Minimizes burrs and allows for damage-free stripping - Processes high-value-added products with high reliability ■ Easy to set up - Easily program strip length, processing speed, and number of processes ■ Low maintenance - No consumable parts for lasers or machinery *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The "Mercury-5" is a laser wire stripping device capable of handling a wide range of wire sizes with an outer diameter of up to 20mm. There is no need for adjustments or setup before processing, and with touch panel operation, you simply select the desired parameters from the program library, while detailed parameters are automatically set. The preparation for processing is complete by just selecting the program. Additionally, by inserting the wire into the cable entry and pressing the start button, the cable is automatically secured, and processing begins. You can confirm the completion of processing as the cable is pushed out. 【Features】 ■ High-quality, scratch-free stripping ■ Compatible with many polymer materials and coating colors ■ No consumable parts required due to non-contact operation ■ Supports wire sizes with an outer diameter of up to 20mm ■ Strip and slit processing up to a maximum of 280mm *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

The "Mercury-4" is a laser wire stripping device that can accommodate various polymer materials and coating colors. It supports a wide range of wire sizes from 0.0010 to 16 mm² (50 to 6 AWG). No mechanical adjustments are required; simply select the desired parameters from the program library using the touch panel, and the detailed parameters will be set automatically. Therefore, preparation for processing is complete by just selecting the program. 【Features】 ■ High quality, scratch-free stripping ■ Compatible with various polymer materials and coatings ■ No consumable parts required due to non-contact operation ■ Powerful and flexible processing performance ■ 20W laser *For more details, please refer to the PDF document or feel free to contact us.

• Pipe and cable cutters

The "EcoStrip 9380" is an entry-level fully automatic cable cutting and stripping device designed for professional use. The functionality of this product has been significantly enhanced by a transport unit that allows for easy switching between roller transport, belt transport, and short mode drive. Additionally, the S.ON software minimizes the time required for training and setup. 【Features】 ■ Three transport systems ■ Revolutionary cost performance ■ Simple and easy operability through the standard S.ON interface by Schleuniger ■ A clever integration of new technology and Schleuniger's traditional precision *For more details, please refer to the PDF materials or feel free to contact us.

• Other processing machines

The "JumboCutter 4285/4385/4485" is a device that automatically measures and cuts round cables with a maximum diameter of 20mm (JC4285), 30mm (JC4385), and 40mm (JC4485), as well as flat cables with a maximum width of 85mm. Designed with a high-speed and high-precision conveyor belt, it transports cables at a maximum speed of 60m/min, ensuring high cutting accuracy with minimal variation. 【Features】 ■ Extremely high measurement accuracy with minimal variation ■ Powerful cutting force with air-operated cutting ■ Very easy operation with an intuitive menu screen ■ LCD screen with multi-language display (Japanese/English/German) ■ Program registration function (save/load) *For more details, please refer to the PDF document or feel free to contact us.

• cable

The "CoaxStrip 5300RXS" features a precise mechanism and high production capacity, allowing for high-quality stripping of cables with a minimum conductor size of 0.07mm (AWG 42). The newly developed high-speed rotating stripping head achieves high processing quality and repeatability, minimizing downtime during maintenance. It is suitable for processing ultra-fine coaxial cables used in medical devices and wireless equipment antennas. 【Features】 ■ Continuous processing of multiple programs via wire list ■ Iguana(TM) cable processing software (optional) ■ Error diagnosis function ■ Data protection function via password (user-level protection) ■ Standard vacuum system for stripping waste removal ■ Ultra-precision and high production *For more details, please refer to the PDF document or feel free to contact us.

• cable

The long-selling product "MultiStrip 9480 Series" is a highly versatile fully automatic cable cutting and stripping device that can be expanded with many options and accessories. Equipped with a rotary cutter head (available in MR, RS, RSX, and RX versions) that allows for complete program control, it enables easy and high-precision processing of coaxial cables and other cable types. Furthermore, when combined with a unique indexing cutter head that has multiple positions, it can be applied to a very wide range of applications. 【Features】 ■ High expandability ■ Maximization of productivity ■ Simple programming ■ Commitment to high precision *For more details, please download the PDF. Feel free to contact us with any inquiries.

• Other processing machines

The "WireStacker 500/1000" is a passive wire stacking system. It can accurately receive cables processed by the Schloniger fully automatic length measurement, cutting, and terminal stripping device. It uses the standard interface equipped on EcoStrip 9300/9320, OmniStrip 9450, PowerStrip 9500/9550, and MegaStrip 9600. 【Features】 ■ Low-cost solution with no management hassle ■ Supports cables up to 1.5m (WS500) / 3.0m (WS1000) in length ■ Accommodates long cables that are difficult to handle ■ Open design that can also support lengths greater than 1.5m (WS500) / 3.0m (WS1000) ■ Sturdy aluminum frame and stainless steel body ■ Also supports short cables *For more details, please refer to the PDF document or feel free to contact us.

• Winding Machine

The "UniStrip 2600" is a desktop wire processing device that strips single wires from 0.03 to 16 mm² (AWG 32 to 6), round cables with a maximum outer diameter of 9 mm, and flat cables up to 11 mm wide. It features a highly flexible design with advanced processing programs. With a powerful stripping motor, the latest electronics, and a user-friendly display, it allows for easy and advanced cable stripping operations. 【Features】 ■ High flexibility ■ Extremely high repeat accuracy ■ Quick tool-free exchange ■ Prevention of operator errors ■ User-friendly operation, such as simple start of processing *For more details, please refer to the PDF materials or feel free to contact us.

• cable

The "JacketStrip 8450/8460" is a jacket stripping device that strips the outer sheath (jacket) of round cables with outer diameters of up to 24mm/35mm to a maximum length of 150 or 500mm. The rotating four-blade system accurately cuts into the cable sheath. The clamping pressure can be adjusted to a suitable setting according to the cable. Stripping waste is automatically discharged after stripping. 【Features】 ■ Four-blade system ■ Rotating strip head design ■ No need for blade replacement for each cable ■ High repeat accuracy ■ Easy operation with a touch panel display *For more details, please refer to the PDF document or feel free to contact us.

• cable

GOF processing requires utmost care, but this FS7030 has achieved high productivity and yield through its high repeatability.

• Other optical parts

The "JacketStrip 8310" is a jacket stripping device that precisely slits the outer sheath of cables. With this floating blade system, it allows for slitting the cable without damaging the core wire, making it easy to strip the outer sheath. The highly operable interface, short cycle time, and universal design ensure a high return on investment. 【Features】 ■ No blade replacement required when processing cables of different diameters ■ Equipped with a wayback function and a centering universal jaw system ■ Intuitive program registration via a color touch screen ■ Digital display of blade depth in both vertical and circular directions *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract