DKSHマーケットエクスパンションサービスジャパン List of Products and Services

Specific heat capacity is one of the fundamental and important physical properties utilized in material development and chemical engineering. By using Setaram's Calvet-type calorimeter with a 3D sensor-equipped DSC, it is possible to measure the Cp (specific heat at constant pressure) of various substances with high precision and under diverse conditions. In this seminar, we will introduce Cp measurements for solids, including those for low-density materials, composites, and high-pressure conditions, which are difficult to measure with general-purpose DSC. [Contents] ■ Key points of Cp measurement using general-purpose DSC ■ Differences between general-purpose DSC and Calvet-type calorimeter (3D sensor) ■ Cp measurement using Calvet-type calorimeter - Under high-pressure conditions - Low-density insulation materials/composites - Cement/elastomers ■ Models of Calvet-type calorimeters *You can view the seminar materials with Japanese translations for free from the "Download" section below! We hope this will be useful for your company's material analysis and Cp (specific heat capacity) measurements.

• Food Testing/Analysis/Measuring Equipment
• Other measurement, recording and measuring instruments

"Pipe Tight Recover" is a highly crimpable piping accessory made of silicone rubber. Application: Seals the penetration points of existing piping. Compared to conventional sealing materials: - No worries about cracking due to vibrations - No need for putty - Aesthetically pleasing and hygienic white color Please feel free to contact us for samples.

• Rubber

We are pleased to announce that SOTAX, in close collaboration with the National University of Singapore, has developed a new BioJECT cell (patent pending) compatible with the CE7smart (SOTAX JP3 (USP4) flow-through cell dissolution testing device) as a new solution for in vitro testing of subcutaneous injection drugs such as insulin. This cell features a small container called a biomatrix for filling samples, allowing for testing that simulates subcutaneous tissue. By combining the BioJECT cell with the CE7smart, we support the development of effective testing methods for various subcutaneous injection drugs, including in-situ implants, peptides, and low molecular weight compounds. ■ Exhibition Name: 7th Pharma Lab EXPO Tokyo ■ Dates: July 9 (Wed) - 11 (Fri), 2025 ■ Time: 10:00 AM - 5:00 PM ■ Venue: Tokyo Big Sight ■ Booth Number: E6-26

• Other physicochemical equipment

The Sotax dissolution testing device AT XtendTM is capable of conducting dissolution tests for various dosage forms such as tablets and ointments. Additionally, it complies with JP1,2 (USP1,2,5,6), and through automation of the device and unified data management, it enables the production of more efficient and highly accurate products.

• Other physicochemical equipment

"Pipe Tight Sleeve" is a highly crimpable component made of silicone rubber. Application: Seals the gap space of piping that runs through pipes ("Pipe In Pipe" PIP method). Compared to conventional products: - No worries about cracking - No need for screws or putty - Aesthetically pleasing and hygienic white color Please feel free to contact us for samples.

• Rubber

Depth filters recommended by Strassburger, a filter press manufacturer with a 100-year history in Germany. Since its founding, the company has been deeply involved in the clarification filtration of wine in Germany and is still widely used today. High-quality filters recognized in Europe can be used not only with Strassburger filter presses but also with other filter presses!

• Filtration Equipment
• Other pumps
• Chemicals

The "Grommet Mini" is a through sleeve made of silicone rubber. Compared to conventional products: - Made of durable silicone rubber, less prone to cracking - Snap-in type, no putty required - Silicone rubber adheres tightly - No screws needed, eliminating contamination risk Please feel free to contact us for samples.

• Rubber

When it comes to ultrasonic cleaning of wires, the product wire (bobbin) is immersed in a bathtub equipped with an ultrasonic cleaning machine filled with cleaning solution, and it is either left for a period of time or mechanically vibrated for cleaning. However, it is quite difficult to remove the lubricating oil and dirt that are stuck between the wires. The Heelscher wire cleaning device features a special sonotrode (resonator) of 400 mm with holes of appropriate diameter for the wire size, shaped like a cylinder, through which cleaning solution flows, allowing the wire or cable to pass through and run. Inside that cylinder, countless cavitations generated by powerful ultrasound occur, removing lubricating oil and dirt adhered to the surface of the wire or tape. These cavitations form a jet stream of 400 m/h in the small area within the cylindrical shape, stripping away unwanted residual lubricating oil and impurities from the surface of the wire flowing in the line. Compared to ultrasonic baths, the cavitation density in the solution is over 1000 times greater, allowing for efficient cleaning in a short time.

• Winding Machine
• Other processing machines
• Ultrasonic Cleaner

Ultrasonic extraction is an effective new technology for isolating bioactive compounds from plants. However, ultrasonic extraction must be powerful to be successful, and Heelscher ultrasound generates high output and low frequency, producing intense cavitation. It moves energetically through the liquid in a slurry made of plant materials in the solvent, where extreme temperatures, pressures, heating/cooling rates, and pressure differentials create locally intense shock waves. When cavitation bubbles collapse on the surface of solids (particles, plant cells, tissues, etc.), micro-jets and partial collisions generate effects such as surface peeling, erosion, particle destruction, sonoporation (penetration of cell walls and membranes), and cell destruction. Until now, ultrasonic equipment could achieve localized processing in laboratories, but scaling up ultrasonic equipment for production was not possible. Heelscher ultrasonic equipment ensures high output (50,000W) and guarantees continuous operation for 24 hours. The erosion dispersion achieved through 100% cavitation by ultrasound allows for results that could not be achieved by shear force.

• Other powder equipment
• Homogenizer
• Other processing machines

Ultrasonic treatment of liquids inside standard vials (such as Eppendorf tubes) is typically performed by immersing vials stored in a basket in the water of a general ultrasonic bath for an extended period. The ultrasonic equipment in the ultrasonic bath not only has low output and amplitude but also causes the ultrasound to attenuate as it passes through the medium of water, resulting in only minimal cavitation occurring inside the vials. The Heelscher ultrasonic equipment has developed a technology that allows for air operation, enabling vials to be inserted into a special holder that is vibrated intensely to generate strong cavitation inside. (This is almost an air operation.) This is the VialTweeter. Compared to ultrasonic baths, the VialTweeter can generate over 1000 times the cavitation inside the vials. Therefore, it can complete ultrasonic treatment of vials that would normally take time, almost instantaneously. <Applications> Cell lysis, dissolution, nanodispersion of aggregates, reduction of particle size, extraction, emulsification, Chemical reactions (sonochemistry) <Fields> Biology, nanomaterials, inks & pigments, chemicals, cosmetics, food & beverages.

• Emulsifier/Disperser
• Separation device
• Crusher

Heelscher Co. has made it possible to safely use Heelscher ultrasonic processing equipment in explosion-proof areas by obtaining the explosion-proof type approval number in Japan. The type certification is for ultrasonic outputs of <2000W>, <4000W>, <6000W>, and <8000W>, and it seems to be for complete production facilities. Heelscher ultrasonic equipment, which guarantees high output and continuous operation for 24 hours, achieves what was impossible with ultrasonic devices through 100% cavitation erosion dispersion, differing from the dispersion methods used by shear force-based shear homogenizers, ultra-high pressure homogenizers, and stirring bead mills. Moreover, even with the same ultrasonic technology, the results are entirely different from those of immersion-type ultrasonic cleaners. This is a technology made possible only by Heelscher's powerful ultrasonic equipment, which features high amplitude and high surface strength. <Applications> Nanodispersion of aggregates, reduction of particle size, extraction, emulsification, dissolution, chemical reactions <Fields> Nanomaterials, batteries, electronic materials, coatings, inks, pigments, fuels, chemicals, cosmetics, biology, food & beverages.

• Other processing machines
• Homogenizer
• Emulsifier/Disperser

Heilshar Corporation primarily designs and manufactures large and powerful ultrasonic equipment, offering lab equipment, prototype benchtops, and production-level devices. The results are completely different from those of immersion-type ultrasonic cleaners. It is the high amplitude and high surface strength of Heilshar's powerful ultrasound that enables this technology. Until now, Heilshar ultrasonic equipment, which guarantees high output (50,000W) and 24-hour continuous operation, achieves what was impossible with ultrasonic devices. Unlike shear mixers, ultra-high pressure homogenizers, and stirring bead mills that use shear force, it employs 100% cavitation through ultrasound for erosion dispersion, achieving results that shear force could not. <Applications> Nanodispersion of aggregates, reduction of particle size, extraction, emulsification, dissolution, chemical reactions (sonochemistry) <Sectors> Nanomaterials, paints, inks, pigments, fuels, chemicals, cosmetics, biology, food & beverages.

• Other powder equipment
• Other processing machines
• Fine grinding machine

Are you facing any of the following issues with nano-level dispersion and emulsification? Please feel free to consult us. • I want to use a powerful ultrasonic dispersion machine. • I want to achieve dispersion with minimal contamination. • I am considering scaling up from lab equipment. • I want to achieve even finer dispersion than now. This is a powerful ultrasonic processing device for dispersion, emulsification, and homogenization in liquids. It has zero heat generation, is compactly designed, and can operate continuously for 24 hours. Additionally, it can operate in air (patented), allowing for new applications in the atmosphere. For more details, please refer to the PDF materials or feel free to contact us.

• Homogenizer
• Fine grinding machine
• Emulsifier/Disperser

The sigma meter is a device specifically designed for measuring saturation magnetization (σs). This parameter is widely used as an indicator of the properties of ferromagnetic materials and is independent of the sample's structure and shape. The measurement of saturation magnetization itself is completed in about 10 seconds. Additionally, the operation of the sigma meter is very simple, making it easy to incorporate into manufacturing processes as a quality control test. 【Application Examples】 ◆ Management of the manufacturing process of cemented carbide (sintered materials) ◆ Quality control of magnets and magnetic compounds ◆ Quality control in alloy manufacturing (martensite measurement, austenite measurement, ferrite measurement) ◆ Quality control of nickel, cobalt, iron carbide, iron oxide, and ferrite-containing materials

• Analytical Equipment and Devices
• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

This is an insulated adiabatic reaction calorimeter (ARC) that meets the needs of the fields of safety engineering and process engineering, achieving a compact design. It can obtain essential data for evaluating the safety of chemical processes, such as heat generation rate and the temperature at which runaway reactions begin. It is capable of measuring temperature and pressure increases at a wide range of tracking speeds.

• Analytical Equipment and Devices

◎Laser Sensor The laser sensor from LTI, designed for targeting natural objects, features high precision, pinpoint accuracy, and long-range capabilities, making it ideal for numerous autonomous unmanned systems. It effectively distinguishes between obstacles and the actual distance range that needs to be measured for unmanned vehicles. To optimize performance according to the user's environment, adjustments can be made via dial-in for pulse rate, output level, and advanced target mode. Reliable measurement data is collected and immediately converted into the necessary output format for transmission to the user. ◎TruSense S-200 Series • The smallest and lightest sensor from LTI. It can be installed in any location. • The OEM version can be easily integrated into any system by removing the case. • Long-range specification capable of reaching up to 1 mile (1.6 km) for natural object targets. ◎Universal Laser Sensor (ULS) • Accurately senses fast-moving targets in real-time. • Penetrates fog and dust even when used outdoors. • High precision/high reliability in distance accuracy.

• Distance measuring device

○ The ultimate sensor engineered for non-contact liquid level measurement Through years of research and development, LTI has developed a sensor that accurately measures liquid level non-contactly. It can directly measure liquid levels in any dielectric property, turbulent water surfaces, and highly reflective conditions. ○ High precision and reproducible measurement results - Maintains high precision even with highly reflective liquid surfaces like transparent liquids - The receiver consistently captures stable reflected waves, leading to highly reliable results - Smooths out the peaks and valleys caused by random movements of the liquid surface, continuously collecting homogeneous data.

• Testing Equipment and Devices
• Area Sensor
• Other security and surveillance systems

○ Completely Sealed Filter Press System A sealed filter system using a combination of sheets, plates, and frames. HERMETIX is a fully sealed type filter system designed for pharmaceutical manufacturing and fine chemicals. ○ Sealed System An O-ring gasket is fitted around the circumference of the filter plate, sealing the internal filter layers (or using a gasket incorporated into the frame). This method allows for 100% sealing without leaks. The design pursues ease of use of the system, ensuring that the product does not come into contact with the external environment and facilitating CIP cleaning and easy handling. O-ring Free By using specially designed filter plates, a 100% leak-free O-ring-less type is also possible, eliminating the need for O-ring gaskets. ○ Applications Pharmaceuticals (for plasma fractionation, protein harvest, vaccines, separation of antibiotics, etc.) and fine chemicals. ○ Filter Plate Material: Stainless steel (316L) or plastic (PP) options are available.

• Separation device
• Filtration Equipment
• Solid-liquid separation filter

Strassburger Filter GmbH, a filter press manufacturer with a long history, celebrated its 100th anniversary last year. Among its products, the HERMETIX series, a sealed filter press system, is designed to meet the special requirements of pharmaceutical manufacturing. Thanks to its uniquely designed membrane plates and sealing methods, it allows for completely sealed filtration without any product leakage to the outside. Having a long history of catering to the pharmaceutical industry, it complies with GMP standards and supports various validations. Additionally, it is compatible with CIP/SIP processes, so please feel free to consult us. Furthermore, since its establishment, the company has a wealth of experience in applications such as clarification filtration for wine and beer, as well as cake collection for chemical products, among many others. Tailor-made customization allows for product designs that fully align with customer requirements. With a focus on sanitary design, high recovery rates, and ease of handling, we support our customers' product development from research and development to mass production.

• Filtration Equipment
• others

The "Melt Filter (high-performance melt resin filter)" manufactured by Ettlinger, which we handle, is a filter system that can be used for the recycling of various waste plastic materials. Both the "ERF" and "ECO" series can accommodate filters for almost all general-purpose resins generated in recycling equipment, sheet and film manufacturing equipment, tape and spinning equipment, or compounding processes. Thanks to its unique compact design, it does not require extensive modifications to existing extrusion lines for installation. 【Features】 ■ Compatible with contaminated materials containing up to 16wt% by weight (ERF) ■ Ultra-high efficiency: can also handle materials containing aluminum and elastomers ■ Stability of process pressure ■ Minimization of residence time for melt resin and foreign substances within the filter ■ Sealed system that does not come into contact with outside air ■ Reduced frequency of filter replacement: capable of automatic operation for several weeks to months (depending on the application) ■ Reduction of raw material loss rate for melt resins with high contamination rates ■ Compact design, minimizing installation space ■ Automatic control operation with high safety *For more details, please refer to the PDF materials or feel free to contact us.

• filter
• Other filters

The "QuintSonic 7" is a high-precision ultrasonic pulse thickness gauge that can non-destructively measure the coating thickness on substrates such as metal, plastic, glass, ceramic, and wood, up to a maximum of 5 layers at once. By adopting the digital sensor technology SIDSP, uniquely developed by Electrophysics, both accuracy and repeatability have been improved. Depending on the sound velocity, it can measure coating thickness from approximately 10μm to about 7mm. 【Features】 ■ Capable of measuring coating thickness of up to 5 layers in a single measurement (varies with sound velocity) ■ Can also measure the thickness of the substrate ■ Utilizes the digital sensor technology SIDSP, uniquely developed by Electrophysics ■ Capable of recording over 40 measurements per minute due to rapid signal processing ■ Suitable for use in the field *For more details, please refer to the PDF document or feel free to contact us.

• Coating thickness gauge
• Other measurement, recording and measuring instruments

The membrane-type reinforced PTFE filter provided by Profilco eliminates seams at the filter adhesive joints through seamless submicron filter technology, allowing for the reduction of pre-coating and body feed processes without the use of filtration aids. Since there is no need to maintain high pressure within the filter tank using an open-top design, there is no requirement for high-pressure tanks or high-pressure generating devices. Back pulsing can easily detach the cake from the filter candle by reversing the flow of purified water, which is held above by its own weight. (Features) * No use of filtration aids * Simple filtration process * No need for high-pressure tanks * Long lifespan * Lightweight overall system * Filter replacement possible without cranes or special heavy machinery * Reduction in capital investment

• Filtration Equipment
• Chemicals
• Solid-liquid separation filter

The new "external three-piece" gear pump from MAAG is a fluid transfer unit designed for particularly low flow applications, featuring excellent corrosion resistance and the capability for heater heating. Due to its three-piece (split) structure, it facilitates the replacement and maintenance of internal components such as gear shafts and gear bearings. To accommodate special applications and requirements, various component configurations and materials can be selected. 【Features】 ■ Reduction of shear load ■ High reliability and extended lifespan ■ Short lead times achieved through in-house production of key components ■ High maintainability ■ High energy efficiency ■ High precision in injection volume control *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Metal bearings

The "PVD coating device" contributes to the production of high-quality products and helps keep product prices low for end users. It features a shiny metallic finish. It is robust and has high hardness, with functionality for wear resistance and corrosion resistance. Additionally, it accommodates various types of metals and alloys such as stainless steel, chrome, titanium, copper, brass, silver, and aluminum. [Main Features of the PVD Physical Reaction Process] - No water used, completely free of chemical emissions - Shiny metallic finish, abundant multicolor and diverse gloss finishes - Robust and high hardness, wear resistance and corrosion resistance - Very economical with short batch cycle times, high reproducibility, and lower defect rates *For more details, please refer to the external link or feel free to contact us.

• Other processing machines

We would like to introduce the "ultra-micro sample viscometer" manufactured by Leosense, handled by DKSH Japan Co., Ltd. Our lineup includes the portable "micro VISC," which completes measurements in 1 to 2 minutes, the easy and fast-operating "m-VROC," and the fully automatic "VROC initium," which supports temperature and shear rate scanning. 【Features】 ■ High precision and high reproducibility ■ Application of Microfluidics and MEMS technology ■ Measurement of pressure using multiple sensors arranged in the flow path ■ Viscosity calculated from the slope of the graph *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Composite Materials
• Viscometer

The "micro VISC" is a portable ultra-micro sample viscometer measuring 145mm x 2161mm and weighing 0.8g. It employs an innovative measurement system utilizing microfluidic control engineering and microelectromechanical systems (MEMS) technology. It demonstrates high precision and high reproducibility even with small sample volumes (from 100μL), and measurements can be completed in just 1 to 2 minutes with simple and quick operations. 【Features】 ■ Easy and quick operation ■ High precision and high reproducibility ■ Small sample (from 100μL) ■ Portable ■ No cleaning required (uses disposable syringes) *For more details, please refer to the PDF document or feel free to contact us.

• Viscometer

The 'IGA Series' manufactured by Hiden Isochema allows for the real-time and accurate measurement of gas/vapor adsorption and desorption amounts using ultra-precise balances. By utilizing feedback from weight, pressure, temperature, and gas flow, various conditions such as isothermal and isobaric measurements can be fully automated and controlled. Additionally, the ultra-precise balances installed within the heat sink achieve high resolution and a stable baseline. 【Features】 - The entire process from sample drying/degas to adsorption and desorption is completed within this device. - It is unaffected by headspace volume, allowing for measurements of small quantities. - The kinetics of adsorption and desorption can be directly observed through weight changes. - It supports the measurement of mixed gas adsorption of up to four types. - All models can be upgraded to higher models after installation. - The standard software Hisorp enables fully automated measurements and various analyses. *For more details, please refer to the PDF document or feel free to contact us.*

• Weight related measuring instruments
• Other measurement, recording and measuring instruments

The "Setline STA/STA+" is a simultaneous TG-DSC measurement device manufactured by Setaram Instrumentation. It features a platinum alloy plate-type DSC sensor, achieving high-sensitivity calorimetry across the entire measurement range of the device (room temperature to 1100°C). With a highly sensitive and stable balance, it enables high-precision simultaneous thermogravimetric analysis. 【Features】 ■ Utilizes a platinum alloy plate-type DSC sensor ■ Achieves high-sensitivity calorimetry ■ Enables high-precision simultaneous thermogravimetric analysis ■ Sample containers: aluminum, alumina, and platinum are available *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices
• Analytical Equipment and Devices

The "Setline DSC/DSC+" is a differential scanning calorimeter manufactured by Setaram Instrumentation. It employs a simple structured plate-type DSC sensor. Due to its rod-type sensor structure, which can be replaced by the user, it significantly reduces repair time and costs in case of sensor failure. 【Features】 ■ Utilizes a simple structured plate-type DSC sensor ■ Significantly reduces repair time and costs in case of sensor failure ■ Rapid heating and cooling rates ■ Efficiently conducts various measurements *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Model 518PC" is a dry film thickness gauge equipped with a CCD camera in the microscope section. Using software, the boundaries of each layer in the cut image are specified with circles, and the film thickness is automatically calculated based on the distance of each layer and the angle of the drill. Additionally, if the boundaries of the layers are difficult to distinguish, this product allows for changes in the color and shading of the image, making the boundaries of each layer clearer. We also offer the "Model 518MC," which can measure multilayer coating film thickness by layer. 【Features of Model 518PC】 ■ Easily calculate the film thickness of each layer with software ■ The use of a CCD camera makes the boundaries of each layer clear ■ Capable of saving numerical data and images ■ Allows for retrieval and recalculation of image data ■ Reduces individual differences in measurements *For more details, please refer to the PDF document or feel free to contact us.

• Coating thickness gauge

The "m-VROC" is an ultra-micro sample viscometer that employs an innovative measurement system utilizing Microfluidics and MEMS (Micro-Electro-Mechanical Systems) technology. It demonstrates high precision and high reproducibility even with small sample volumes (20μL and above). Additionally, this product allows for easy and fast operation and is compatible with non-Newtonian fluids. 【Features】 ■ Easy and fast operation ■ High shear rate compatibility (up to 1.4×10^6/sec) ■ Closed system measurement ■ Accurate temperature control (4–70℃) *For more details, please refer to the PDF document or feel free to contact us.

• Viscometer

Albert's straightening machine for wire, established in 1898, has over 120 years of history. We propose the optimal straightening machine based on accumulated know-how. We offer various models compatible with different wire materials such as steel wire, copper wire, and stainless steel, addressing customer requests to straighten wires and eliminate wire coiling issues. We provide various options including rollers with groove processing (square, round, and other shapes), rollers suitable for wire materials (hard and soft), high-speed rollers (line speed: 1,000 m/min), position indicators, and micrometers. 【Features】 ■ High-precision straightening capability ■ Extensive lineup, proven experience and track record ■ Comprehensive range of optional products *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

Since 2016, the measurement of water activity (aw) has been newly included as a general testing method in the Japanese Pharmacopoeia, and its importance is increasing. This document focuses on applications of water activity values specifically for traditional Chinese medicine. [Contents] ■ Evaluation of microbial proliferation ■ Chemical stability of active ingredients ■ Optimization of the drying process *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices
• Other physicochemical equipment
• Other inspection equipment and devices

The ZetaView x30 series nanoparticle tracking analysis (NTA) device can analyze the size and concentration of individual particles, such as exosomes and liposomes, by capturing video of Brownian motion. It can be equipped with up to four wavelengths of lasers. The high-speed laser/filter switching suppresses fluorescence fading and accurately determines the particle size distribution of fluorescently labeled particles. Additionally, a new feature called Colocalization option allows for the determination of the ratio of double-stained particles. 【Features】 ■ Scanning measurement at up to 11 locations ■ Auto-alignment and auto-focus functions ■ Equipped with up to 4 lasers, allowing for particle size distribution measurement using various fluorescent labels ■ Capable of measuring zeta potential

• Optical Measuring Instruments
• Other Analysis

The membrane PTFE filters provided by Profilco Co. enable the reduction of pre-coating and body feed processes with seamless submicron filter technology. Since there is no need to maintain high pressure within the filter tank using an open-top design, there is no requirement for high-pressure tanks or high-pressure generating devices. The back pulse can easily detach the cake from the filter candle by allowing the purified water, held at the top by its own weight, to flow backward. It is compatible with various types of salts (solar salt, rock salt, vacuum salt, etc.).

• Filtration Equipment
• Chemicals
• Solid-liquid separation filter

SETARAM has combined its unique Calvet method with semiconductor sensors to achieve highly sensitive DSC measurements with excellent operability. The main reason why Micro-DSC can be used for a wide range of applications is that, despite being ultra-sensitive, the sample container can be removed separately from the detection area. The Micro-DSC is equipped with 3D Calvet sensor technology and is designed for research on crude oil, emulsions, biopolymers, carbohydrates, biological samples, hydrates, PCM, and more.

• Analytical Equipment and Devices
• Other physicochemical equipment

We not only conduct research and development of products but also develop our own manufacturing plants, constantly updating the processes to produce high-quality tools. [How to Choose the Right Tool] Feard offers a wide range of products with various grinding materials, particle sizes, hardness, and shapes to suit our customers' applications. Since we manufacture using the latest production equipment, we are able to consistently produce and supply highly accurate products. To select the optimal type of mounted grinding wheel, it is important to first consider the material, main tasks, and desired surface finish.

• Hand polishing and filing

We support your work with a wide range of product offerings. Our exceptional quality and tool longevity contribute to reducing work time and costs. The Feard carbide rotary burrs can also be used with robots. Please select the appropriate product according to your application. [Features] - Outstanding tool performance with high-quality carbide materials and a variety of cutting shapes and head shapes - Improved cutting performance through cuts designed for specific materials - Long tool life - Reduces impact and core runout, aiding in a smooth finish - Suitable for deburring, chamfering, and cutting welded areas

• Other cutting tools

Even after long-term use, Faird files achieve high-quality finishes with excellent cutting ability. Faird's quality is maintained through outstanding manufacturing technology and strict quality control. The shape of each blade is designed to adapt to specific workpieces and tasks. There is no single file that is optimal for all tasks. Faird accommodates a wide range of tasks by offering various blade shapes and file designs. [Features] - Uniform hardness due to the perfect microstructure of tool steel - Accurate and uniform shaping from the handle to the blade tip - A lineup of files optimized for various applications

• Hand polishing and filing

A new ultra-micro viscometer utilizing microfluidic control and microelectromechanical systems technology. The VROC Initium is a fully automated model that handles everything from sample introduction to channel cleaning, solving the issues of traditional viscosity measurement that required cumbersome procedures and large sample volumes. It contributes to research and development and quality control across a wide range of fields, including biopharmaceuticals, biological samples, inkjet inks, various petrochemical products, and battery materials. [Features] - Fully automated system compatible with 96 wells - High precision and high reproducibility - Supports temperature and shear rate scanning - Small sample volume (10 μL and up) - Wide measurement range (0.2 to 100,000 cp) - High shear rate capability (up to 1.6 million /sec) - Accurate temperature control (4 to 70 °C) - Closed system measurement - Compatible with non-Newtonian fluids

• Testing Equipment and Devices
• Composite Materials
• Viscometer

Ericsson's products are manufactured to solve various problems encountered in testing within the lacquer and coating industry. They can accommodate different raw materials, lacquers, paints, and coatings both before and after application.

• Testing Equipment and Devices

The Novasina company's "Water Activity Measurement Device" can perform measurements in accordance with the "General Testing Methods" specified in the 17th revision of the Japanese Pharmacopoeia announced in 2016. By adopting an electrical resistance-type humidity sensor, the water activity measurement range can accommodate a minimum of 0.03 aw, making it suitable for low water activity samples such as powders and tablets! <Benefits for customers in the pharmaceutical industry using Novasina products> - The Novasina water activity measurement device adopts the calibration points specified in the pharmacopoeia, allowing for calibration in accordance with pharmacopoeial methods. (Other devices may use different calibration points.) - In addition to the above points, calibration is also possible at Aw 0.03 (ERH 3.4%). It can handle very dry powders and tablets, as well as low water activity samples. - Higher-end models like the LabMaster-aw come with a constant temperature system. Additionally, we have extensive experience in IQ/OQ installation and validation for pharmaceutical companies. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Temperature and humidity measuring instruments
• Analytical Equipment and Devices

[Equipped with Touch Screen] All operations can be performed on the screen, allowing for intuitive control. Output, frequency, liquid temperature, and time can be checked immediately on one screen! [Wide Processing Range] Supports batch sizes from 5mL to 4000mL, and with the optional flow cell, processing of 10L to 50L/hour is also possible. Experimental data and parameters are fully linked with mass production machines, making it ideal for consideration of future implementation into actual machines (up to 16,000W).

• Homogenizer

[Problems Caused by Moisture] 1. Microbial growth 2. Decreased physical and chemical long-term stability 3. Reliability of drying process management → Solving these problems may be difficult with simple moisture content measurement alone. Measuring water activity is the optimal method for accurately managing the moisture of very dry pharmaceuticals. The LabMaster-aw from Novasina can measure water activity values from 0.03aw to 1.00aw. We also have demo units available for loan!

• Temperature and humidity measuring instruments
• Analytical Equipment and Devices
• Other physicochemical equipment

Two versions are available, with drawing force and wrinkle control force of 600 kN and 1,000 kN, capable of handling blank diameters up to 220 mm. They are ideal for FLC tests and bulge tests that require high wrinkle control force. The drawing force and wrinkle control force can be controlled via a PC, and the drawing speed, punch stroke, and maximum values are displayed digitally. As an option, high-speed drawing of up to 30,000 mm/min is possible, along with control of the testing machine and evaluation of measurement data through a PC interface. Additionally, other tests such as square tube drawing tests, warm deep drawing tests (up to 550°C), high-speed drawing tests, and Fukui tests can also be conducted.

• Testing Equipment and Devices