Kistler Japan G.K. List of Products and Services

The Kissler ComoNeo is a process monitoring system designed to optimize, monitor, and document the plastic injection molding process. In addition to mold cavity pressure, it collects and evaluates signals from the injection molding machine (e.g., injection pressure, injection speed, screw position, etc.) as well as the mold surface temperature (connected via thermocouple temperature amplifier model 2205A...). －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • A "dashboard" screen displays relevant processing data consolidated into one screen. • The "EO Assistant" software allows for automatic creation and definition of monitoring boxes. • Simple and efficient hardware and software design due to a process-oriented operational concept. • Rapid mold changes and short setup times are possible with the automatic mold identification feature. • The built-in cycle history (data memory) can store up to 50,000 cycles. • Key process parameters necessary for monitoring and evaluating process stability are automatically calculated.

This is a connector for connecting up to 8 single wires or coaxial cables to ComoNeo using a single cable. The 4-channel connector connects up to 4 sensors, while the 8-channel connector can connect up to 8 sensors. • Up to 8 internal pressure sensors can be used • Multi-connector for 4-channel or 8-channel • Use of extension cables for 4-channel or 8-channel

The 6152A series crystal piezoelectric type internal pressure sensor measures the internal pressure of plastic injection molding up to a maximum of 2,000 bar. Since there is no diaphragm at the tip, it can be machined up to 0.5mm to fit the shape of the mold's inner surface. The connection cable is replaceable. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Ideal for industrial use • Machining at the tip is possible up to 0.5mm (except for tip-coated types) • Replaceable cable

• Optimal for low pressure, high temperature, and low viscosity resins • Long-term static pressure measurement possible due to piezoresistive design • Two independent channel outputs can be individually range set • High-resolution measurement of low pressure vacuum and minimal pressure changes • Simultaneous measurement of resin pressure and mold surface temperature • Automatic temperature compensation prevents thermal changes from affecting pressure signals during molding • Measurement element for high temperatures can measure up to 275°C

The 6183C series in-mold pressure sensor measures in-mold pressure during plastic injection molding up to 2,000 bar. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Uses single-wire cable • Capable of tip processing due to the absence of a diaphragm (standard type) • Tip coating (optional) • Replaceable cable

The 6184A series in-mold pressure sensor measures in-mold pressure for plastic injection molding up to 2,000 bar. Since there is no diaphragm at the tip, it can be machined up to a maximum of 0.3mm to fit the shape of the mold's inner surface. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Capable of measuring up to 2,000 bar • Machining at the tip is possible due to the absence of a diaphragm

The 6178A series in-mold pressure sensor measures in-mold pressure during plastic injection molding up to a maximum of 200 bar. Since there is no diaphragm at the tip, it can be processed up to 0.5 mm to match the shape of the mold's inner surface.

Our in-mold pressure sensor, which has primarily been used for measuring and monitoring in-mold pressure of automotive-related molded parts, along with our monitoring system "ComoNeo," is now also being adopted in the home appliance industry. Efforts to improve productivity through in-mold pressure monitoring of products such as air conditioners and washing machines are expanding. The 6182D series in-mold pressure sensor measures in-mold pressure for plastic injection molding up to 2,000 bar, making it suitable for various molded products. Additionally, using the monitoring system "ComoNeo" allows for the quantification of the molding process. (Please refer to the catalog below for more information on "ComoNeo.") Currently, we are also accepting applications for online meetings. If you are interested, please feel free to contact us via the inquiry button. 【Features】 • Uses single wire cable • No diaphragm, allowing for tip processing (standard type) • Tip coating (optional) • Cable replacement available

The crystal piezoelectric sensor 6157C series measures the in-mold pressure of plastic injection molding up to a maximum of 2.00 bar. Since there is no diaphragm at the tip, it can be processed up to 0.5 mm to match the shape of the mold's inner surface, and the connection cable is replaceable.

The in-mold pressure sensor 6162AA measures in-mold pressure during plastic injection molding up to a maximum of 200 bar. It is suitable for low-viscosity plastics and resins. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Ideal for industrial applications such as high-pressure RTM, LSR, and SMC • Structure with a diaphragm • Cable is replaceable

The in-mold pressure sensor 6163A measures in-mold pressure during plastic injection molding up to a maximum of 1,000 bar. It is suitable for low-viscosity plastics and resins. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Ideal for industrial applications such as high-pressure RTM, LSR, and SMC • Structure with a diaphragm • Cable is replaceable

The in-mold pressure sensor 6161AA measures in-mold pressure during plastic injection molding up to a maximum of 200 bar. It is suitable for low-viscosity plastics and resins. －＊ Features ＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－＊－ • Ideal for industrial applications such as high-pressure RTM molding • Structure with a diaphragm • Seals the gap between the mounting hole and the sensor using an O-ring • Integrated screw-type structure • Cable is replaceable

The p-T sensor 6188AA series for measuring internal pressure and mold surface temperature can simultaneously measure resin pressure up to 2,000 bar and mold surface temperature in plastic injection molding.

The 6189A series internal pressure and mold surface temperature measurement sensor (p-T sensor) can simultaneously measure resin pressure up to 2,000 bar and mold surface temperature in plastic injection molding.

The 6190CA series internal pressure and mold surface temperature measurement sensor (p-T sensor) can simultaneously measure resin pressure up to 2,000 bar and mold surface temperature in plastic injection molding.

This is a tester for checking the insulation resistance and sensor sensitivity of the built-in pressure sensor, surface temperature sensor, and pressure/temperature sensor that are already installed in the mold. This tester can also be used to confirm the input of the charge amplifier. • For on-site verification of the installed pressure and temperature sensors • User-friendly design with wireless connection test pins • Digital display of measurement results in pC/bar, pC/N, and °C • Capable of checking pressure sensors, temperature sensors, and pressure/temperature sensors • Charge generation function allows for testing of the charge amplifier, enabling testing of the entire measurement chain • Touch screen operation