TAKACHI ELECTRONICS ENCLOSURE CO., LTD. List of Products and Services

Attenuation characteristics in the low frequency range has been improved using a highly permeable NiZn core. The structure makes it difficult to pinch the flat cable between the ferrite core when fitting the resin case. Please use with cables with maximum width of 26.1mm and maximum thickness of 1.4mm. *Scheduled release: Late January 2026

• Other electronic parts
• Ferrite Core
• High frequency/microwave parts

NFTF-20-M4 can be attached onto the NFT-20-20DK with just one touch, and can be fixed in place with M4 screws. Due to its hinge structure, the NFTF-20-M4 can be installed while the wires are turned. *Scheduled release: Late January 2026

• Other electronic parts
• Ferrite Core
• High frequency/microwave parts

Even when used with loose wires, the structure makes it difficult to pinch the wire between the ferrite core when fitting the resin case. By using a highly permeable NiZn core, the attenuation characteristics in the low frequency range have been improved. NFT20-20-DK can be fixed with NFTF-20-M4 (accessory available separately). *Scheduled release date: Late January 2026.

• Other electronic parts
• Ferrite Core
• High frequency/microwave parts

This is a fitting for the TFN series one-touch split toroidal core ferrite clamp. The main body of the toroidal core case can be easily attached and detached with one touch, and it will not come off easily even when subjected to impact from all sides. It can be installed while clamping the main body case to the wiring cable, and the main body case can be opened and closed while installed. Both screw type and double-sided tape type are available for selection. *The TFB series cannot be used with TFT-274015S.

• Other electronic parts
• Ferrite Core
• High frequency/microwave parts

This is a low-cost toroidal core designed to eliminate noise from electronic device cables. It features a simple space-saving design while also having a structure that allows for secure attachment to equipment.

• Other electronic parts
• Ferrite Core
• High frequency/microwave parts

This can be used to secure the wiring cable for the NFT series and TFT-274015S. It can be used either by attaching it on the wiring cable side in advance or on the toroidal core case side. To attach it to the core case, please insert it into the notch on the opened case. 【Compatible Models】 NFT-8, NFT-10, NFT-11, NFT-12, TFT-274015S

• Other electronic parts
• Ferrite Core
• High frequency/microwave parts

This is a low-cost ferrite core designed to eliminate noise from electronic device cables. As part of environmental measures, we use a clean ferrite core which harmful substances have been removed. The resin case is made from non-halogen UL94V-0 certified materials. The cable retention function gently holds the cable without damaging its insulation, and is designed so that the wire is less likely to become pinched between the ferrite core and the resin case when fitted, even when a stranded wire is used.

• Other electronic parts
• Ferrite Core
• High frequency/microwave parts

A rack mount case that complies with EIA standards and features a handle. The outer frame is made of extruded aluminum material, providing a wide internal effective area with a width of 424mm. The front panel is available in two colors: silver and black. The panels, side plates, and top/bottom plates are made of aluminum and are designed for easy assembly, making it a rack case that is very easy to process, perform inkjet printing, and painting.

• rack
• Racks and Cases
• Server Rack

4 sides (outer frames) is composed of extruded aluminum material, featuring an effective width of 424mm and a spacious internal effective area. A new depth size (D) of 430mm has been added, bringing the total size variations to 9 sizes. The panels, side plates, and top/bottom covers are made of aluminum and are designed for easy assembly, making it a rack case that is very easy to perform additional processing, inkjet printing, and painting. *New size (Depth (D) 430mm): Scheduled for launch in mid-January 2026.

• rack
• Racks and Cases
• Server Rack

This is a rack panel with a high perforation rate and excellent heat dissipation. The height size is EIA standard size 1U (44mm), making it compatible with any manufacturer's 19-inch rack.

• Racks and Cases
• rack
• Server Rack

Durable and stylishly designed waterproof protector case. Suitable for storing electronics and delicate devices such as measuring device, camera, broadcasting device, electric tool, medical equipment, and so on. Optional aluminium panel can turn the NK series into your own original controller, measuring device, power supply or transmitter. The NK series is available in standard stock colors of black and yellow, but other colors (graphite, orange, olive green, lime, blue, red, and tan) can be ordered from NANUK (Canada). *The yellow color for the NK960 is available by special order.

• container
• Racks and Cases
• Cabinets and Boxes

IP65 open/closing type polycarbonate box equipped with latch/hinge system and an easy snap-on roof attachment. Made of light gray UL94V-0 polycarbonate, which has good heat resistance properties. Applicable for various uses in fields such as FA, network communication, power switchbox controls and more. 44 different sizes available.

• Cabinets and Boxes
• Control Panel
• Other Boxes

IP65 waterproof polycarbonate enclosure with latch/hinged cover. Made of UL94V-0 polycarbonate, which has good heat resistance properties. Applicable for various uses in fields such as FA, network communication, power switch controls and more. 50 different sizes available.

• Other Boxes
• Control Panel
• Cabinets and Boxes

UL certified polycarbonate enclosure for superior impact resistance. Suitable to be used as controller, junction box, network devices, outdoor measuring instrument and more. 22 different sizes available and selectable from 2 different cover types (light gray and transparent). Body color: white gray NEMA standards are developed by the National Electrical Manufacturers Association (NEMA) in USA. NEMA Type 4X rating is equivalent to IP56 protection rating. NEMA Type 6 rating is equivalent to IP67 protection rating. UL FILE No, E189312 / UL508A (USA), CSA C22.2 No. 14 (Canada) certified products. Applicable standard: INDUSTRIAL CONTROL PANELS See www.ul.com for additional information.

• Cabinets and Boxes
• Control Panel
• Other Boxes

UL certified polycarbonate enclosure for superior impact resistance. Molded with metric knock-outs for easy removal for cable entry. Suitable to be used as controller, junction box, network devices, outdoor measuring instrument and more. 15 different sizes available and selectable from. 2 different cover types (light gray and transparent). Body color: white gray NEMA standards are developed by the National Electrical Manufacturers Association (NEMA) in USA. NEMA Type 4X rating is equivalent to IP56 protection rating. NEMA Type 6 rating is equivalent to IP67 protection rating. UL FILE No, E189312 / UL508A (USA), CSA C22.2 No. 14 (Canada) certified products. Applicable standard: INDUSTRIAL CONTROL PANELS See www.ul.com for additional information.

• Cabinets and Boxes
• Control Panel
• Other Boxes

UL certified latch-hinged box for easy opening and closing. Applicable for various uses in fields such as FA, network communication, power switch controls and more. NEMA standards are developed by the National Electrical Manufacturers Association (NEMA) in USA. UL FILE No, E343339 / UL508A (USA), CSA C22.2 No. 14 (Canada) certified products. Applicable standard : INDUSTRIAL CONTROL PANELS See www.ul.com for additional information. Polycarbonate material allows good heat resistant performance. Suitable for telecommunication devices and solar power connecting boxes. 49 different sizes available and 2 different cover types (light gray and transparent).

• Cabinets and Boxes
• Control Panel
• Other Boxes

A set of tray and divider for convenient storage. The handle can be fitted on the tray. The handle can be removed when not in use. Easy organization with tray and divider.

• container
• Racks and Cases
• Cabinets and Boxes

Robust and stylish waterproof carrying case in a top loader type design. Large carrying handle for easy transportation and for outdoor use. Top loading design allows vertical storage of tall items such as measuring instruments or camera lenses. Available in two sizes, with or without internal foam. Refer to optional parts page for various optional parts.

• container
• Racks and Cases
• Cabinets and Boxes

***Available as BTO*** (built-to-order) IP65 protection class and impact resistant diecast aluminium box. A large selection of 35 different sizes to choose from. Diecast aluminium box has superior heat dissipation, heat resistance, and oil resistance compared to plastic box. This series is built to order. Able to order from just 1 piece. The delivery time is listed on the chart below. Self-tapping captive cover screws which are able to lock into a pre-drilled hole and provide a secure hold for fastening the cover.

• Cabinets and Boxes
• Control Panel
• Other Boxes

Aluminium rack mounting panel enclosure with handles conforming to EIA standards. Surface is hairline brushed for a luxurious finish.

• Racks and Cases
• rack
• Server Rack

Reinforced aluminium rack mounting panel conforming to EIA standards. Surface is hairline brushed for a luxurious finish.

• Racks and Cases
• rack
• Server Rack

Cover for AC power socket Type-A Protects unused outlets from foreign objects such as dust.

• power supply
• power supply

Bushing grommet to be installed on the cut edge of the hole to protect cables and components from damage.

• Wiring materials
• cable
• plastic

Small size pole mounting bracket suitable for indoor use. Installation screws (M3 size) are sold separately. See PCB MOUNTING SCREW MT series page for compatible MT3-4 screws. Minimum applicable pole diameter is Φ35. Use SNB/PKB/SCT mounting belt to install enclosures onto a pole.

• Piping Materials
• Board materials
• belt

Right angle standoff for mounting PCB vertically. Installation screws (M3 size) are sold separately. See PCB MOUNTING SCREW MT series page for compatible MT3-4 screws. Material : PC（UL94V-2） Pack of 10pcs

• Printed Circuit Board
• Wiring materials
• nut

Standoff for securing PCB by simply snapping it in. Adhesive standoff can be freely and easily affixed on. Once removed, it cannot be adhered on again.

• Printed Circuit Board
• Wiring materials
• nut

This is a hollow resin spacer for M3 and M4. The recommended tightening torque value is 0.3 N·m or less. Material: PA66 Color: Milky white Sales unit: 1 bag = 20 pieces Lineup: 12 sizes

• Printed Circuit Board
• Wiring materials
• nut

Hexagonal resin standoff for M3 and M4 screws with threaded holes. Internal surface is threaded. Material: PA66 Color: milky white Sold in packs of 20pcs. Lineup: 11 sizes

• Printed Circuit Board
• Wiring materials
• nut

Corrosion resistant stainless steel (SUS304) cable tie. Can be used to bundle cables or mounting enclosures to poles. Self-locking bracket allows easy mounting / cable bundling. Designed for one time use only (not reusable).

• hose
• Vice Clamps
• joint

DIN Rail mount heat-sink case exclusively for use with Raspberry Pi 4 model B. Equipped with highly efficient heat-sink top cover. Constructed using diecast aluminium for strength and rigidity. The Heat dissipation type is available for both the Pi 4B and 5, while the Normal type is only available for the Pi 4B. Raspberry Pi board is not included. Note that oil bleed may occur with thermal conductive sheets.

• Industrial PCs
• Racks and Cases
• Embedded Board Computers

Square shaped semi-transparent type rubber feet with adhesive tape. Sold in packs of 10 pieces.

• Rubber
• Anti-vibration, earthquake-proof, vibration-isolating devices
• Cushioning material

Cylindrical semi-transparent type rubber feet with adhesive tape. Budget-friendly pricing.

• Rubber
• Anti-vibration, earthquake-proof, vibration-isolating devices
• Cushioning material

Wearable enclosure with IP67 waterproof rating (30min / 1m-depth). Off-white models are made of weather-resistant ASA material. Suitable for devices intended to be used under direct sunlight. Stylish and easy-to-wear design that suits any situations.

• Sensors
• controller
• Communications

Hemispherical semi-transparent type rubber feet with adhesive tape. Sold in packs of 10 pcs.

• Rubber
• Anti-vibration, earthquake-proof, vibration-isolating devices
• Cushioning material

Heatsink DIN Rail mount case exclusively for use with the Raspberry Pi 5. Equipped with highly efficient heat-sink top cover. Constructed using diecast aluminium for strength and rigidity. Comes with thermal conductive sheet inside the case. *Raspberry Pi board is not included.

• Industrial PCs
• Embedded Board Computers
• Development support tools (ICE, emulators, debuggers, etc.)

Heat-sink top cover case exclusively for use with the Raspberry Pi 5. Equipped with highly efficient heatsink top cover. Constructed using diecast aluminium for strength and rigidity. The Heat dissipation type and Normal type are available. Available in a Desktop and Flanged wall mount configuration. Flanged wall mount type is compatible with VESA Mount Standards (75 x 75mm / 100 x 100mm) and can be installed on the back side of PC displays, etc. Raspberry Pi board is not included. Note that oil bleed may occur with thermal conductive sheets.

• Industrial PCs
• Embedded Board Computers
• Development support tools (ICE, emulators, debuggers, etc.)

Heatsink top cover case exclusively for use with the Raspberry Pi 4 Model B and Raspberry Pi 5. Equipped with highly efficient heat-sink top cover. Constructed using diecast aluminium for strength and rigidity. 2 types are available : an efficient heat dissipation type and a normal type. Wall mount flange is compatible with VESA mount standards (75 x 75mm / 100 x 100mm), and can be installed on the back side of PC displays, etc. H type comes with thermal conductive sheets.

• Industrial PCs
• Embedded Board Computers
• Development support tools (ICE, emulators, debuggers, etc.)

IP68 high performance diecast aluminium box with heat dissipating properties protected from immersion as long as 24 hours at 1m depth. EMC shielding is achieved by having the unfinished inner sides of the top cover and base, as well as the conductive silicone gasket. Suitable for access points, optical transmission equipment, shockproof industrial PCs and more. Lineup: 4 sizes Color: Metallic silver / Powder coated (inside unfinished)

• Cabinets and Boxes
• Control Panel
• Other Boxes

IP68 high-performance diecast aluminium box protected from immersion as long as 24 hours at 1m depth. EMC shielding is achieved by having the unfinished inner sides of the Top cover and Base, as well as the conductive silicone gasket. Suitable for use in a severe environment such as outdoor network device, plant control equipment, meteorological instruments and more. 4 sizes available in white. Now available: DW10-15-9W, DW14-22-10W, DW14-22-7W *New size scheduled for launch February 2026 　DW10-15-6W

• Cabinets and Boxes
• Control Panel
• Other Boxes

USB TYPE-A and C connector dust cover plug with stopper flap. Hole milling is required for flap installation. Sold in 10 pcs pack.

• cable
• LAN/Optical cable
• Other cable related products

IP68 high performance plastic box protected from immersion as long as 24 hours at 1m depth. PC/ASA material provides superior heat resistance and flame retardancy. Perfect for use as outdoor communication or network devices. Self-tapping captive screws which are able to lock into a pre-drilled hole and provide a secure hold for fastening the cover. Please drive the self-tapping captive screws for cutting a thread into the holes at first so that the cover and body can be secured together properly.

• Cabinets and Boxes
• Racks and Cases
• Control Panel

TAKACHI ELECTRONICS ENCLOSURE is now offering the 2025-2027 ALL PRODUCT CATALOG, which includes a large number of products compatible with 5G and IoT, free of charge. The catalog features cases for small IoT devices such as smartwatch case-type cases and heatsink cases for Raspberry Pi 5, as well as outdoor communication equipment boxes like IP68 ASA resin boxes and IP68 aluminum diecast boxes, among many new products. Additionally, it includes a wide range of convenient optional parts that can be used together with the enclosures, such as waterproof connectors, cable glands, and battery holders. The ALL PRODUCT CATALOG contains a total of 47,682 items related to industrial cases, boxes, and mechanical components, spanning 1,186 pages of rich content. Please send us your request via our request contact form on the TAKACHI website to receive your free copy with complimentary shipping.

• Cabinets and Boxes
• Racks and Cases
• Plastic Mould

TAKACHI offers customization services on cases and boxes to meet customer specifications, including hole processing, printing, overlay sheet production, and painting - from just 1 unit with a short lead time. For hole processing, we offer the most suitable method based on the material and shape of the product, including machining (cutting), laser processing, and turret punching (CNC press processing). We also propose the best methods for text, logos, and serial numbers through inkjet printing without plate costs, silk printing suitable for mass production, and engraving that offers a high-end feel and excellent wear resistance.

• Cabinets and Boxes
• Racks and Cases
• Control Panel

At TAKACHI, we offer the following functional components that are convenient to use together with our cases, boxes, and enclosures: 1) PCB-related components such as universal boards, spacers, and card guide rails 2) Feet-related components such as rubber feet, aluminum feet, tilt legs, and tilt stands 3) Mounting components such as monitor arms, handles, wall-mounting brackets, pole-mounting brackets, and DIN Rail mounting plates 4) Wiring components such as grommets, rubber bushes, and connector covers 5) Mounting screws, special screws (hexalobular screws), nuts, and washers 6) Shielding, electrostatic, and conductivity countermeasure components 7) Thermal management components such as fan motors, finger guards, and fan filters

• Printed Circuit Board
• Board materials
• fan

TAKACHI has a variety of battery boxes, battery holders, battery cases, coin-type lithium batteries, tabbed coin cells, and tabbed button cells in stock at all times, available for sale from one piece. The battery specifications include a lineup of seven sizes: SR621 and LR44 button battery holders, and CR1220, CR1632, CR2032, CR2430, CR2450, and CR2477. For battery holders with PCB mounting terminal types, SMT mounting types and PCB mounting pin types are available for selection. For AA, AAA, C, D, and 9V battery holders, options include lead wire types, PCB mounting pin types, and snap terminal types. Additionally, we also sell holders for 006P (9V), CR2 and CR123A lithium battery holders, battery snaps, and battery terminals with springs.

• Cells and batteries
• Lithium-ion battery
• PCB terminal blocks