TAKACHI ELECTRONICS ENCLOSURE CO., LTD. List of Products and Services

Torque wrench with interchangeable head. Suitable for the tightening of cable glands requiring a specific torque. Open end interchangeable head (spanner head) TWE series available separately.

• Wiring materials
• Waterproof Connector
• Torque wrench

L-shape cable gland with M type threads. Allow wires to be routed vertically. 4 thread sizes for M16・M20・M25・M32 are available. Cable range: Φ5mm～Φ22mm

• Wiring materials
• Waterproof Connector
• connector

Multi-hole cable gland with M threads. Multiple cables can be protected with a single cable gland. Up to a maximum of 6 cables can be used with 1 cable gland. 5 thread sizes for M12・M16・M20・M25・M32 are available in light gray and black. Cable range: Φ1.5mm～Φ11mm

• Circular Connectors
• Waterproof Connector
• Wiring materials

The spiral section prevents the bending of cables and protects against disconnection. Available in six sizes from M8 to M25. Compatible cable diameters: Φ1mm to Φ16mm. Product no. / Screw size / Cable diameter / Standard price RSP8-2.5 / M8 / Φ1 to Φ2.5 / ￥220 RSP8-4 / M8 / Φ2.5 to Φ4 / ￥220 RSP10-6 / M10 / Φ3 to Φ6 / ￥220 RSP12-6 / M12 / Φ3.5 to Φ6 / ￥220 RSP16-8 / M16 / Φ4 to Φ8 / ￥250 RSP20-11 / M20 / Φ6 to Φ11 / ￥310 RSP25-16 / M25 / Φ11 to Φ16 / ￥430

• Wiring materials
• Waterproof Connector
• connector

IP68 snap-lock mini panel-mount connector for easy and frequent connection / disconnection. Easy connection / disconnection through the use of the snap-lock mechanism while installed on panels or enclosures. Screwless terminal block for high-speed connection. 4P and 5P pole models are available. UL2238 / C22.2 No. 182.3 certified products. Plug-socket connector type consisting of the plug side (male) and socket side (female). Screwless connection method; screw, soldering or special tools are not required. Applicable cable size range can be expanded by removing the inner sealing insert.

• connector
• Wiring materials
• Circular Connectors

IP68 snap-lock mini connector for easy and frequent connection / disconnection. Easy connection / disconnection through the use of the snap-lock mechanism. 4P and 5P pole models are available. Plug-socket connector type consisting of the plug side (male) and socket side (female). UL2238 / C22.2 No. 182.3 certified products. Screwless connection method; screw, soldering or special tools are not required. Applicable cable size range can be expanded by removing the inner sealing insert.

• connector
• Wiring materials
• Circular Connectors

Economically priced end stopper bracket for use with 35mm DIN Rail. Can be used to fix terminal blocks or modules. Included screws allow affixing of stopper brackets firmly at a fixed location.

• Connector Terminal Block
• relay
• Terminal Blocks

Stopper bracket for use with 35mm DIN Rail to keep an attachment at a fixed location. TKR-TWE1 is used with small DIN Rail attachment parts. For larger / higher attachment parts, TKR35-1 is recommended for providing additional support.

• Connector Terminal Block
• relay
• Terminal Blocks

Hole plug for sealing holes that are not in use. IP67 rating is achieved through the use of a lock nut. Available in 6 sizes for Φ12.2 to Φ40.3 holes in black and light gray colors. Waterproofing is not guaranteed when directly secured through thread holes.

• Wiring materials
• Cabinets and Boxes
• cable

Rubber grommet to protect cables or wires on the edge of the holes processed on the enclosures.

• Wiring materials
• cable
• Rubber

IP64 and IP54 water-resistant see-through hinged inspection window. Smartly designed window for protection of switches and displays, etc. Use in situations where component status, access and maintenance is necessary. Knurled thumb screws for easy securing. Be careful not to get fingers caught on the spring loaded self-closing cover.

• Safety switch
• connector
• Board materials

This is an aluminum or stainless steel plate that can be manufactured with specified dimensions in 0.1mm increments. We can produce and deliver it within a short lead time of 3 days from just one piece. TAKACHI also accepts orders for hole processing of panel plates, inkjet printing, color anodizing, cell spacers, and stud welding.

• Prototype Services
• Processing Contract
• aluminum

Securing of a 1.6mm thick PCB made easy by simply snapping it in. Adhesive standoff can be freely and easily affixed on. *Once removed, it cannot be adhered on again. Sold in packs of 4 pcs.

• Printed Circuit Board
• Circuit board design and manufacturing
• Prototype Services

This is a compact case suitable for IoT devices with a rounded design. The surface features a luxurious mirror finish while maintaining good cost performance at an affordable price. The cover has a snap-in structure that makes it easy to attach and detach. Despite its small size, it offers ample internal space since it does not use screws, making it a versatile case. The design maintains a rounded shape while ensuring flat sides, allowing for customization such as hole processing and printing without any issues. Product lineup: 【SIC Series】19 sizes 【SIM Series】14 sizes Available in two colors: black and off-white (the off-white material is ASA weather-resistant resin, resistant to discoloration and degradation)

• Cabinets and Boxes
• Wireless LAN
• Communications

This is a simple stainless steel chassis with a sheet metal structure that allows for custom sizes specified in 1mm increments. The dimensions for width, depth, and height can be freely specified, and original stainless steel enclosures can be produced with a short lead time of shipping on the fifth working day. The cover is easy to attach and detach, making it a versatile case that facilitates equipment integration and maintenance. It is made from SUS304 stainless steel, which has excellent corrosion, salt, and chemical resistance. The entire case is conductive, providing a shielding effect (reducing electromagnetic waves). It is ideal for use in power supplies, transformers, controllers, instruments, medical devices, food factories, and clean rooms. Size specification range: Width and depth dimensions can be specified from 60 to 400mm, and height dimensions from 20 to 120mm in 1mm increments. Production lead time: Shipping on the fifth working day after order confirmation. *This applies even if hole processing is included. *Production can be processed from 1 unit.

• Control Panel
• Cabinets and Boxes
• Prototype Services

This is a simple aluminum chassis with a sheet metal structure that allows for custom sizes specified in 1mm increments. The dimensions for width, depth, and height are flexible, and original aluminum enclosures can be produced with a short lead time of shipping on the fifth working day. The cover is easy to attach and detach, making it a versatile case that facilitates equipment integration and maintenance. The interior is conductive, allowing for grounding and earthing. It can be used for a wide range of applications, including switch boxes, touch panel control boards, controllers, wiring junction boxes, and vacuum tube amplifier chassis. Size specification range: Width and depth dimensions can be specified from 60 to 400mm, and height dimensions can be specified from 20 to 120mm in 1mm increments. Production lead time: Shipping on the 5th working day after order confirmation. *This applies even if hole processing is included. *Production can be processed from 1 unit.

• Cabinets and Boxes
• Control Panel
• Prototype Services

IP68 snap-lock mini panel-mount connector for easy and frequent connection / disconnection. Can be attached / detached while installed on panels or enclosures. 4P and 5P pole models are available. Plug-socket connector type consisting of the plug side (male) and socket side (female). Screw type connection method; soldering or special tools are not required. Screwdriver flathead tip width of 3mm is recommended. Screws may be screwed in firmly. Use a screwdriver with proper grip handles to loosen it. Applicable cable size range can be expanded by removing the inner sealing insert.

• Circular Connectors
• connector
• Wiring materials

Low price type conductive flexible copper sheet. Conductive adhesive layer maintains conductivity. Copper tape can be soldered onto a metal foil. Copper sheet can also be used for removing static electricity and improving running performance when applied to automobiles. 257 x 182mm (B5 size) and 297 x 210mm (A4 size) are available. Convenient for shielding wider area or cutting into the designated shapes.

• EMC countermeasure products
• Conductive Mat
• Anti-static products

Low price type adhesive aluminum foil sheet for grounding and shielding of enclosures. Conductive adhesive layer maintains conductivity. Aluminum sheet can also be used for removing static electricity and improving running performance when applied to automobiles. 257 x 182mm (B5 size) and 297 x 210mm (A4 size) are available. Convenient for shielding wider area or cutting into the designated shapes.

• EMC countermeasure products
• aluminum
• Anti-static products

IP68 snap-lock connector for easy and frequent connection and disconnection. 4P and 5P pole models are available. Plug-socket connector type consisting of the plug side (male) and socket side (female). Screw type connection method; soldering or special tools are not required. Screwdriver flathead tip width of 3mm is recommended. Screws may be screwed in firmly. Use a screwdriver with proper grip handles to loosen it. Applicable cable size range can be expanded by removing the inner sealing insert.

• Circular Connectors
• connector
• Wiring materials

A flexible conductive copper foil tape. It is a significantly lower-priced conductive tape compared to conventional products. The tape is easy to wrap and stick. Since it uses a conductive adhesive, it can ensure reliable conductivity without reducing the shielding effect. 【Applications】 - Grounding and shielding of enclosures. - Grounding and shielding of cable harnesses and connector terminals. - EMI shield rooms (measures during shielding property measurements). - It can also be used as a tape to eliminate static electricity and improve drivability when applied to automobiles. Tape widths: Available in four types: 8mm, 13mm, 25mm, and 50mm. Roll lengths: selectable from 2 meters and 20 meters.

• Adhesive tape
• EMC countermeasure products
• Anti-static products

A flexible conductive aluminum foil tape. It is a significantly lower-priced conductive tape compared to conventional products. The tape is easy to wrap and stick. Since it uses a conductive adhesive, it can ensure reliable conductivity without reducing the shielding effect. 【Applications】 - Grounding and shielding of enclosures. - Grounding and shielding of cable harnesses and connector terminals. - EMI shield rooms (measures during shielding characteristic measurements). - It can also be used as a tape to eliminate static electricity and improve drivability when applied to automobiles. Tape widths: 8mm, 13mm, 25mm, and 50mm (4 types available). Roll lengths: selectable from 2 meters and 20 meters.

• Adhesive tape
• EMC countermeasure products
• Anti-static products

Spring battery contact for C, D, AA, and AAA batteries. Positive (+) and negative (-) contacts are available. Brass/nickel plated positive (+) plate contacts and steel wire or stainless steel springs for negative (-) contacts. Sold in packs of 10 pcs.

• Secondary Cells/Batteries
• Spring
• Lithium-ion battery

A low-cost hose band made of stainless steel with excellent corrosion resistance. It is a type of hose clamp that can be securely attached by tightening with a screw. It can be used for attaching air, liquid, and oil hoses. We offer a wide range of 23 sizes to accommodate various hose diameters, from 8mm to 308mm. In addition to hose attachment, it can also be used as a pole fixing band for outdoor boxes. A box driver (nut driver) is recommended for tightening. A flathead screwdriver can also be used. Product lineup: 23 sizes Material: Stainless steel SUS304

• hose
• Vice Clamps
• joint

Aluminum enclosure equipped with a highly efficient heat-sink top cover. EMC shielding is achieved by having the unfinished inner sides of the heat-sink top cover, bottom frame and panels, as well as the shielding gasket in contact with one another. Grooves for M3 sliding nut are built into the heat-sink top cover and bottom frame (140mm or wider). Optional nut is available. 64 different sizes available in metallic silver painted finish (unfinished inside for EMC shielding).

• Cabinets and Boxes
• Industrial PCs
• Racks and Cases

The most popular handheld plastic enclosure in Japan. Designed with beveled edges and rounded corners, and manufactured from flame-retardant ABS UL94V-0 material. Available in 9 different compartment types: AAx2, AAx3, AAx4, AAAx2, AAAx3, AAAx4, AAAx6, 9Vx1, and no battery compartment type. Positive (+) / negative (-) pole mark are incused within each battery compartment. Recommended to be used as measuring instruments, testing devices, wireless communication gadgets, medical equipment, and more.

• controller
• Data Logger
• Cabinets and Boxes

Equipped with flanged bracket for easy wall mounting. Aluminum enclosure equipped with a highly efficient heat-sink top cover. Available in 64 different sizes and 2 color combinations.

• Industrial PCs
• Racks and Cases
• Embedded Board Computers

This is an inclined aluminum case suitable for desktop controllers. The side panels are made of plastic, and the frame is made of extruded aluminum, making it lightweight. The panel is designed with one side screw-mounted and the other side snap-fitted, allowing it to be used as a front on either side. The 19-inch size is available in two color options: GS type in gray/silver and BB type in black.

• controller
• Cabinets and Boxes
• Control Panel

Tough diecast aluminum box Conductivity can be achieved by utilization of the contact between the unfinished inner surfaces (only applicable to "N" type). Popular for electric guitar effect pedals 13 different sizes and 2 color types in black painted and unfinished are available.

• Cabinets and Boxes
• Sound Parts
• Amplifier

Universal plastic enclosure with screw fastening. 26 sizes are available in 2 colors; Black (ABS UL94HB) and Off-white (ABS UL94V-0).

• controller
• Cabinets and Boxes
• Sensors

Low cost, general purpose small plastic project box. No screws required; simple snap-in cover. Exclusive PCB (TNF series) is available. Please use it for small-lot device production, prototyping, or electronic projects. 17 sizes, 3 different material types (standard, flame-resistant, and heat-resistant) are available. 【Product Lineup】 Standard ABS resin type: 17 sizes available in two colors, light gray (similar to Munsell 5Y8/0.5) and black (similar to color Munsell N1) Flame-retardant ABS resin type: 4 sizes available in gray (similar to Munsell 5GY7/0.5) Heat-resistant ABS resin type: 5 sizes available in black (similar to Munsell N1)

• Cabinets and Boxes
• Plastic utensils and containers
• Sensors

Waterproof polycarbonate enclosure for superior impact resistance. Available in 28 different sizes, with 2 different cover types (white gray and transparent). Suitable to be used as controller, junction box, network devices, outdoor measuring instrument and more.

• Cabinets and Boxes
• Control Panel
• controller

This is a low-cost transparent plastic case made of styrene. Available in 8 sizes.

• Plastic utensils and containers
• Glassware and containers
• furniture

10x10mm threaded cube shape standoff with a thread on 4 faces. M3 and M4 thread models available. Conveniently usable when installing PCB or metal plate upright. CUBE can also be used to make a simple housing by vertically aligning the plates.

• Printed Circuit Board
• Circuit board design and manufacturing
• Other electronic parts

Shock-proof design aluminium enclosure equipped with tilt leg for measuring instrument use. Corner guards are designed to be both aesthetically pleasing, and impact resistant. Available in 30 different sizes and 16 different color combinations.

• Testing Equipment and Devices
• Cabinets and Boxes
• Racks and Cases

Transparent acrylic box with corner support frames and elastomer corner guards. Extruded aluminium corner frames enables the structure to be rigid when screwed. Perfect to be used as a display case to showcase a product’s internal components at trade shows or demonstration events, or as a touch screen monitor box. Can be manufactured in a wide range of dimensions. Adjustable sizes available in 1mm intervals, with W and D dimensions from 55 ~ 500mm, and H dimensions from 30 ~ 500mm. Elastomer corner guards are impact resistant and function as anti-slip rubber feet. Black (similar to RAL7021) or Gray (similar to RAL7043) color can be selected.

• Cabinets and Boxes
• Glassware and containers
• plastic

Square shaped aluminum box with corner support columns and elastomer corner guards. Simple 6 panel structure allows easy assembly and maintenance access. Can be manufactured in a wide range of dimensions. Adjustable sizes available in 1mm intervals, with W and D dimensions from 55 ~ 500mm, and H dimension from 30 ~ 500mm. Elastomer corner guards are impact resistant and function as anti-slip rubber feet. Black (similar to RAL7021) or gray (similar to RAL7043) color can be selected.

• Cabinets and Boxes
• Control Panel
• Racks and Cases

2.54mm hole-to-hole pitch pin socket connector. Utilize with RPCB expansion PCB for Raspberry Pi series. 4 (2 pin x 2) pin and 40 (20 pin x 2) pin models are available.

• Board to Board Connectors
• socket
• Expansion Boards

Expansion PCB for standard Raspberry Pi boards. Use to install expansion parts or components. Expansion PCB can also be utilized on RPI-4B and RPA series cases. Environmentally friendly lead-free solder. RoHS3 compliant.

• Printed Circuit Board
• Expansion Boards
• Embedded Board Computers

Suitable to be installed into enclosures with material thickness of 1.0mm to 3.5mm. Cover can be opened/closed without any tool for easy battery replacement. Lineup: 5 different battery layouts: AA x 2, AA x 3, AA x 4, AAA x 2 and AAA x 4 2 colors available: black and off-white Each layout comes in 2 models: with lead-wire, and without lead-wire. "+" and "-" markings prevent incorrect placement of battery. *The dimensions of alkaline or manganese batteries may vary depending on country and brand. Use optional battery cushion sponge to prevent rattling.

• Secondary Cells/Batteries
• Lithium-ion battery
• Other Boxes

Network plastic box attached with shockproof silicone corner guards. Suitable for industrial tablet, measuring equipment, controller, and various other applications. A total of 6 color combinations available with 3 corner guard colors - dark gray, emerald, indigo - and 2 plastic box colors - dark gray and off-white.

• controller
• Cabinets and Boxes
• Analytical Equipment and Devices

DIN Rail mount heat-sink case exclusively for use with Raspberry Pi 4 model B. Equipped with highly efficient heat-sink top cover. Constructed using diecast aluminium for strength and rigidity. The Heat dissipation type is available for both the Pi 4B and 5, while the Normal type is only available for the Pi 4B. Raspberry Pi board is not included. Note that oil bleed may occur with thermal conductive sheets. Max load: 300g Operating temperature: -20℃ ～ +80℃

• Industrial PCs
• Racks and Cases
• Embedded Board Computers

Heatsink top cover case exclusively for use with the Raspberry Pi 4 Model B and Raspberry Pi 5. Equipped with highly efficient heatsink top cover. Constructed using diecast aluminium for strength and rigidity. 2 types are available : an efficient heat dissipation type and a normal type. Wall mount flange is compatible with VESA mount standards (75 x 75mm / 100 x 100mm), and can be installed on the back side of PC displays, etc. H type comes with thermal conductive sheets.

• Industrial PCs
• Embedded Board Computers
• Racks and Cases

This is a heat-dissipating heatsink case for the Raspberry Pi Model 4B. Equipped with highly efficient heatsink top cover. Constructed using diecast aluminium for strength and rigidity. The Heat dissipation type and Normal type are available. Available in a Desktop and Flanged wall mount configuration. Flanged wall mount type is compatible with VESA Mount Standards (75 x 75mm / 100 x 100mm) and can be installed on the back side of PC displays, etc. Raspberry Pi board is not included. Note that oil bleed may occur with thermal conductive sheets.

• Embedded Board Computers
• Racks and Cases
• Industrial PCs

6 new sizes added for a total of 14 different sizes available for selection. Small rounded design plastic case ideal for use as IoT devices. Easily attached to, or detached from the wall by using the wall mounting bracket. Made of weather-resistant ASA material. Suitable for devices intended to be used under direct sunlight. Optional universal PCB, PCB32-53 is compatible with SIM5-7-2 and 5-7-3 models. See PCB series on our website for more details.

• Wireless LAN
• Routers, Switches, and Hubs
• Sensors