TAKACHI ELECTRONICS ENCLOSURE CO., LTD. List of Products and Services

Waterproof portable plastic case made of double shot injection molded TPE grip and ABS body. IP67 waterproof and does not allow water to enter even if dropped into water. TPE side grip provides not only a comfortable grip, but also protects from drop impact. Suitable to be used as a remote controller, wireless network device, IoT sensor, GPS, RFID tag, and more. Available in 6 different sizes and 4 different compartment types : CR2450/CR2477x1, CR2032x1, AAAx2, and no battery compartment type. Battery contacts are included with the CR2032 type. CR2032 battery contacts can be used by mounting them on the PCB.

• IC tag
• controller
• Sensors

IP67 waterproof handheld enclosure. Can be used for measuring instruments, communication devices, and controllers in outdoor or harsh factory environments. It has a high level of waterproofing that can withstand being submerged in water at a depth of 1 meter for 30 minutes without any water ingress. The battery structure allows for options of 2, 3, 4, or 6 AA batteries, as well as 2, 3, or 4 AAA batteries, or no batteries at all. Side grip is easy to hold and protects against impacts from drops and other impacts. 9 sizes and 10 color options available.

• Cabinets and Boxes
• Radiation detector
• Electrical Instruments/Electrometers

High waterproof box for outdoor use made of ASA resin, resistant to discoloration and degradation from ultraviolet rays, with waterproof protection class of IP68 / IP67. Can be easily wall-mounted by simply removing the blind cover. Can be attached to poles or utility poles with an optional mount bracket. Waterproof protection class: IP68 (waterproof for 24 hours at a depth of 1 meter without water ingress) - 22 sizes IP67 (waterproof for 30 minutes at a depth of 1 meter without water ingress) - 2 sizes Product lineup: 24 sizes

• Wireless LAN
• Routers, Switches, and Hubs
• Cabinets and Boxes

Flat design plastic case. It has a panel structure, making it easy to process. Lineup 41 sizes in total, available in off-white and dark gray.

• Wireless LAN
• Routers, Switches, and Hubs
• Cabinets and Boxes

Durable and stylishly designed waterproof protector lockable case. Equipped with a TSA lock latch for security, or transportation as check-in baggage. Optional aluminium panel can turn the NKK series into your own original controller, measuring device, or portable power supply.

• container
• Cabinets and Boxes
• Other Boxes

【Universal Tool Case MAXI Series】 - A carrying storage case available in 17 wide-ranging sizes. - Easy to open and close with a snap-in latch mechanism. - Ideal for storing tools, measuring instruments, medical devices, precision parts, and test samples. - Available in black and light gray colors. 【Low-Cost Tool Case MINI Series】 - A lightweight, compact, and sleekly designed low-cost tool case. - Made of elastic PP resin that is resistant to cracking from drops and impacts. - Available in 3 sizes. 【Design Tool Case XTRA Series】 - A tool case with a curved handle design. - Made of elastic PP resin that is resistant to cracking from drops and impacts. - Available in 4 sizes. 【Waterproof Carrying Case NK Series】 - A stylish attaché case design in a Pelican case type waterproof case. - Made of lightweight and high-strength reinforced PP resin. - Waterproof and dustproof with protection rating IP65 (prevents dust from entering and withstands water spray from all directions for over 3 minutes at 12.5 liters per minute). - Available in 22 sizes, with options in black and yellow colors. - Interior foam padding available / option for no padding.

• Cabinets and Boxes
• container
• Tool Sets

TAKACHI produces overlay sheets with embossed buttons with significantly low initial costs. 【Reasons behind low initial costs】 - Using a CNC embossing machine eliminates the need for pressing dies to apply embossing (buttons) - Printing is done with inkjet printing, therefore print plates are not required - Both sheet and double-sided tape are cut with a CNC cutting plotter, eliminating the need for a cutting die With the new production method, which introduces the CNC embossing machine, lead time and costs have been reduced dramatically. - Production possible from just one sheet - Perfect for making prototypes and high-mix low-volume production - Embossing can be performed even in the development phase - We also welcome orders for overlay sheets only (New method) Sheet production lead time using CNC embossing machine New orders: 8 working days Repeated orders: 6 working days (Conventional method) Sheet production lead time using embossing dies New orders: 15 working days Repeated orders: 6 working days With unprecedented flexibility, we will support your speedy product development.

• Surface treatment contract service
• Nameplate
• switch

This is a versatile carrying case that opens and closes easily with a snap-in latch. A wide range of 17 sizes is available, from L25.4×W23×H7.2cm to L45.2×W38.3×H20.0cm. By adding optional internal foam, you can enhance the protective function for stored equipment. Ideal for storing tools, precision parts, measuring instruments, test samples, medical devices, and more.

• Tool Sets
• container
• Other Boxes

Easy to use! Low-cost tool case! 【Size (external dimensions)・Standard Price】 L230 × W187 × H45mm 　￥1,790 L265 × W225 × H50mm 　￥2,010 L327 × W275 × H55mm 　￥2,910

• Other Boxes
• container
• Tool Sets

【Tool Case XTRA Series】 ■ A carrying-type tool case with a stylish appearance featuring a curved handle design. ■ By adding optional internal sponge foam, it is possible to enhance the protective function for stored equipment. ■ Ideal for storing medical devices, pharmaceuticals, measuring instruments, tools, precision parts, and test samples. ■ Available in 4 sizes and 2 colors: black and light gray. (Models 403810 and 494614 are available in black only.) Material: PP (Polypropylene) plastic 【Size (external dimensions) & Standard Price】 Sales Unit: 1 unit～ L258 × W246 × H49 mm / ￥3,220 L320 × W308 × H81 mm / ￥4,190 L397 × W308 × H96 mm / ￥5,820　　 L486 × W460 × H136 mm / ￥12,370

• Other Boxes
• container
• Tool Sets

At TAKACHI, custom sponge can be produced in short lead times starting from just 1 piece! 【Sponge Materials】 ■ Urethane Foam A highly elastic sponge foam. Its soft material makes it easy to remove from storage equipment, which is an advantage. It is mainly produced through press processing using molds. ■ Polyethylene Foam A sponge with high airtightness and a slightly harder texture. It has good machinability and is used for processing complex shapes through cutting. 【Interior Sponge Production Using Cutting Machines】 ■ No initial costs (mold production costs) are required. This provides a price advantage for small lots. ■ TAKACHI has introduced a combined processing machine with vibrating blades and cutting drills, enabling the processing of complex shapes. ■ It allows for recessed processing with freely adjustable depths, which cannot be replicated with molds. *Note: In the case of recessed processing, traces of machining will remain on the finished surface. 【Press Processing Production Using Molds】 ■ Mold costs are required, but for large lots (approximately 30 to 50 pieces or more), the unit price is lower, providing a cost advantage. ■ Since processing can be done under the same conditions, it allows for a finish with minimal individual variation. ■ Only through holes can be processed. ■ When processing thicker materials made of polyethylene (harder), warping may occur in the cross-section.

• Cushioning material
• container
• Other packaging materials

TAKACHI ELECTRONICS ENCLOSURE offers additional processing of aluminum cases and aluminum boxes, as well as cutting processing of aluminum plates, starting from just one piece with a short delivery time! We achieve high-quality and quick processing with a German-made high-speed machining center, which is exclusively owned by our company in Japan. Additionally, we have an inkjet printer capable of printing on aluminum materials, allowing us to provide processing and printing as a combined service.

• Prototype Services
• Processing Contract
• Milling machine

Takachi Electric Industry offers additional processing of aluminum cases and aluminum boxes, as well as cutting processing of aluminum plates, starting from just one piece with a short delivery time! With our German-made high-speed machining center, which is unique to our company in Japan, we achieve high-quality processing with a short lead time. Additionally, we have an inkjet printer capable of printing on plastic materials, allowing us to provide processing and printing as a combined service.

• Prototype Services
• Processing Contract
• Milling machine

TAKACHI offers inkjet printing for cases and boxes with low initial costs, starting from just one piece and with short lead time. 【Reason for Low Initial Cost】 Because the printing is performed using data, there are no plate costs for silk screen printing! 【Lead Time】 Inkjet printing only: Shipped after 3 working days after order confirmation Hole milling + inkjet printing: Shipped after 8 working days after order confirmation

• Printing Machinery
• Surface treatment contract service
• Nameplate

Handheld case with a shock-resistant design and a silicone cover. Main case is available in a total of 7 sizes. 2 colors available: off-white (similar to Munsell N8.75) and dark gray (similar to Munsell N3) There are types available with and without a battery box, and the battery configurations include 2 AA, 3 AA, 4 AA, 2 AAA, 3 AAA, 4 AAA, 6 AAA, and 006P (9V) batteries, totaling 8 options. Silicone cover is available in 4 colors: dark gray, navy blue, green, and orange.

• Electrical Instruments/Electrometers
• Radiation detector
• Cabinets and Boxes

This is a pocket-sized case with a simple design and a silicone cover. The cover is elastic and non-slip, protecting the device from impacts such as drops. Type with a coin battery storage space allows for easy battery replacement. Please solder the included battery terminal to the circuit board for use. You can choose from the following coin battery types: CR2032×1, CR2032×2, CR2450×1, CR2477×1. 【Nominal battery capacity】 CR2032: 225mAh CR2450: 620mAh CR2477: 1000mAh It can be used for remote controls, small wireless devices, simple measuring instruments, RFID tags, small GPS devices, sensor equipment terminals, IoT network equipment terminals, and more. There is a strap attachment hole on the side, allowing you to attach the optional STPS series strap. Size: 4 sizes Colors Case body: white / similar to Munsell N9.5; black / similar to Munsell N1 Silicone cover: orange, green, cyan, light gray, black, enabling a total of 10 color combinations

• Cabinets and Boxes
• Sensors
• IC tag

Easy-to-hold handheld enclosure with silicone cover. There are types with and without a battery box, and the battery configurations available are: 2 AA, 3 AA, 4 AA, 2 AAA, 3 AAA, 4 AAA, 6 AAA, and 006P (9V), totaling 8 options. The case comes in 8 sizes, and available in 2 colors: off-white (similar to Munsell N8.75) and dark gray (similar to Munsell N3). The silicone cover is available in 5 colors: dark gray, light gray, blue, green, and red.

• Electrical Instruments/Electrometers
• Radiation detector
• Cabinets and Boxes

Low cost and simple, snap-in cover structure case. Comfortable shape and hold. 4 different sizes and 5 different colors are available for selection. Suitable for use as a wireless device, remote control, key fob etc. Designed with an easily accessible hole for strap attachment. Protection class: IP40 Operating temperature: -10℃～+60℃ P color type has been scheduled to be discontinued and will no longer be available once current inventory has depleted. Please take this into your consideration when selecting color type.

• Cabinets and Boxes
• IC tag
• Sensors

IP68 waterproof and heat dissipation extruded aluminum enclosure. Designed with flanged end panels. Tough and robust construction. PCB or chassis is mounted by sliding it horizontally into an inner-grooved body frame. Designed for a tough environment where waterproof and heat countermeasures are required. Suitable for outdoor use such as LED power supplies and junction boxes.

• power supply
• Cabinets and Boxes
• Other Boxes

Waterproof aluminum enclosure with an ultra-robust design featuring a silicone protector. The side panels are made of diecast aluminum, and the main frame uses extruded aluminum in a heatsink shape. The gasket (waterproof packing) is made of conductive silicone, providing EMC-shielding effect. Total of 25 sizes and 6 color variations available.

• Cabinets and Boxes
• Electrical Instruments/Electrometers
• controller

Waterproof box with an IP65 waterproof and dustproof protection rating. It is a maintenance-friendly plastic box with an opening and closing design, suitable for various fields such as electrical construction, communication equipment, and FA/control. Available in a wide range of 50 sizes, with covers in white gray and transparent options. You can choose between the cost-effective ABS resin BCAP series and the high-strength, flame-retardant UL94V-0 polycarbonate BCPC series.

• LAN construction and wiring work
• Cabinets and Boxes
• Control Panel

IP65 hinged polycarbonate enclosure equipped with key lock latch. Made of light gray UL94V-0 polycarbonate, which has good heat resistance properties. Lockable enclosure best used for tamper prevention in FA, control box, and network communication fields. 【Line-up】 Light gray cover types : 50 different sizes Transparent cover types : 46 different sizes (BTO in extra lead time of 2 months) ***Transparent top cover type (T type) requires 2 months delivery time due to BTO (built-to-order) ***

• LAN construction and wiring work
• Cabinets and Boxes
• Other Boxes

This is a weather-resistant cable gland made of silicone rubber that is resistant to ultraviolet rays and aging. [Weather resistance] refers to the property of polymer materials such as plastics and paints that makes them less likely to deform, discolor, or deteriorate when used outdoors. It has an IP67 waterproof rating, making it ideal for outdoor use. An O-ring is attached to the base, allowing it to be waterproof even when used on uneven wall surfaces to a certain extent.

• Circular Connectors
• Waterproof Connector
• Wiring materials

This is a waterproof connector with IP68 rating, capable of withstanding 3 bar for 3 hours (at a depth of 30m). The wiring method is screw-type, making it easy to work with. Number of terminals can be selected from 2P, 3P, 4P, or 5P. The set includes a plug side (male) and a socket side (female). If you only need the plug side or the socket side, please order using the individual part number.

• Circular Connectors
• Waterproof Connector
• Wiring materials

A panel mount connector that can be mounted on panels and enclosures and allows for insertion and removal. Waterproof connector equivalent to IP68 3bar/3h (3 hours@30-meter depth). The wiring method is screw-type, making it easy to work with. The number of terminal poles can be selected from 3P, 4P, or 5P. The plug side (male) and socket side (female) are sold as a set. If you only need the plug side or the socket side, please order using the individual part number.

• Circular Connectors
• Waterproof Connector
• Wiring materials

This is a highly waterproof connector equivalent to IP68 3bar/2h (30m depth for 2 hours). The terminal section has 4P×4, and each is common. The wiring method is screw-type, making it easy to work with.

• Circular Connectors
• Waterproof Connector
• Terminal Blocks

Waterproof connector equivalent to IP68 2bar/3h (20m depth for 3 hours) protection class. Wiring method is screw-type, making it easy to work with. 3 types of terminal poles available: 2P, 3P, and 4P.

• Circular Connectors
• Wiring materials
• connector

Waterproof connector with a plug and socket set. Terminal pole numbers can be selected from 6P and 8P. Rated voltage is 400V, rated current is 16A, and compatible cable diameter is Φ7 to 13.5mm. The wiring method is screw-type, making it easy to work with.

• Circular Connectors
• Waterproof Connector
• Other Connectors

IP68 panel-mount plug-type connector for installation on panels or boxes. Plug-socket panel-mount type consisting of the plug side (male) and socket side (female). Screw type connection method; soldering or special tools are not required. 3P, 6P and 8P pole models are available. THB406-3P is UL2238 / C22.2 No. 182.3 compliant product. For safety reasons, please arrange the connector such that the primary side is female (socket side) and the secondary side is male (plug side).

• Waterproof Connector
• Circular Connectors
• connector

There are various shapes that can accommodate different cable wiring methods, such as straight type, L right angle type, T branching type, Y branching type, and 4 branching type. No soldering or specialized crimping tools are required for wiring. Only a screwdriver is needed, making wiring work on site easy. There are 7 types of terminal poles available, ranging from 3P to 8P.

• Waterproof Connector
• Circular Connectors
• connector

A series of cable glands that secure cables and prevent the ingress of water, oil, and dust. In addition to low-cost types, we offer high-performance options such as IP68 (waterproof at a depth of 10m for 30 minutes), high waterproof types, heat-resistant types up to 200°C, and EMC shielded types to meet all customer needs. Low-Cost Waterproof Cable Gland RM Series ■ Plastic M-thread cable gland with protection rating IP67 (waterproof at a depth of 1m for 30 minutes) ■ Compatible with a wide range of cables from Φ2.5mm to Φ42mm ■ Available in 17 sizes from M8 to M63 *If you would like a free sample, please contact us through the "Contact Us" section.

• cable

General-purpose cable gland with a screw section that conforms to the M screw standard. It offers waterproofing with an IP67 protection rating (equivalent to 30 minutes at a depth of 1 meter) and is available at a low price. The screw sizes range from M8 to M63, and it accommodates cable outer diameters from Φ1mm to Φ44mm, offering a total of 17 sizes in a wide lineup. The rubber bush is made of highly oil-resistant NBR rubber. It comes with an O-ring on the seating surface, allowing for waterproofing even when used on uneven wall surfaces to a certain extent.

• Circular Connectors
• Waterproof Connector
• Wiring materials

High waterproof with IP68 protection class - 0.5 bar/30 min (waterproof for 30 minutes at a depth of 5m). Compared to conventional products, the rubber bush is thicker, providing a larger contact surface with the cable and holding it with uniform force. It demonstrates stable and high waterproof performance even against repeated tightening. Compatible cables range from Φ2.5mm to Φ42mm, with a wide lineup. Available in a total of 15 sizes from M8 to M50.

• Waterproof Connector
• Wiring materials
• connector

This is a high waterproof metal cable gland with a protection rating of IP68, capable of withstanding 1 bar for 30 minutes (30 mins@10m depth). The rubber bush is thick and has a large contact surface with the cable, allowing it to hold the cable with uniform force. It demonstrates stable and high waterproof performance even against repeated tightening. It accommodates a wide range of cables from Φ2mm to Φ42mm. Total of 14 sizes available, from M6 to M50.

• Wiring materials
• Waterproof Connector
• connector

Heat resistant sealing insert made of FPM material. Resistant up to 200℃. Protection class : IP68 1bar / 30min 10m depth immersion for 30 minutes Operating temperature : -40℃ ~ +200℃ Compliant with EN50262 Var. A

• Waterproof Connector
• Wiring materials
• connector

Optimal contact spring provides excellent shield contact and the smallest possible transfer impedance. Clawed lock nut makes a good EMC shield contact possible on conductive enclosures. Shape of the contact spring not only allows for a large clamping range to the shield but also enables easy and faster installation and re-installation. 2-piece detachable sealing inserts can be adapted to the wider existing cable diameter on site. (AGE12 available only with 1-piece sealing insert)

• Wiring materials
• connector
• EMC countermeasure products

High waterproof performance with protection class IP68, 5bar/1h (equivalent to 1 hour at a depth of 50m). 【Lineup】 Sizes: Screw sizes M16 to M25, compatible cable diameters Φ5mm to Φ17mm, Φ6×2 hole type, a total of 5 types Colors: 3 types - light gray/gray, black/gray, black/green

• Circular Connectors
• Wiring materials
• connector

Waterproof junction box with a cable gland and body in a single structure. It has a protection class of IP68, with waterproof performance at 0.5 bar for 3 hours (equivalent to depth of 5 meters for 3 hours). Both 3-way and 4-way types are available. The terminal block is removable, and the connection method is screw-type, making it easy to work with. The terminal section can be selected from 7 types: without terminal block, 3P, 5P, 8P, 3WP, 4WP, and 3LP. By using optional rubber bushings, it can accommodate cables of various diameters.

• Cabinets and Boxes
• Terminal Blocks
• Waterproof Connector

Integrated junction box consisting of cable glands and a terminal block. Suitable for industrial facilities, power cable joints, relay between motors and/or sensors. IP65 protection class with high oil resistant PBT material. 3, 4, and 6 pole types are available. Φ5.0 and Φ7.4 rubber cable bushes (2 pcs each) are included. Φ5.0 bush : Cable range Φ4～5mm Φ7.4 bush : Cable range Φ6～7mm

• Cabinets and Boxes
• Terminal Blocks
• Waterproof Connector

Compact size junction box ideal for power lines and sensor relay. Waterproof with IP65 protection class. Lower price compared to other products. TMB-4P, 6P, and 10P come with a Φ21 knockout. When making a hole, place a flathead screwdriver against it and strike it firmly with a hammer or similar tool. For waterproofing the knockout hole, please use the separately sold M20 size cable gland. A wide range of optional parts available!

• Cabinets and Boxes
• Terminal Blocks
• Waterproof Connector

IP67 waterproof polycarbonate enclosure with knockouts. Molded with metric knock-outs for easy removal for cable entry. Tough polycarbonate material for superior impact resistance. Suitable to be used as terminal junction box, control box, wireless network devices and more. Mountable on walls by using the cover holes for fastening. Available in 28 different sizes, with 2 different cover types (white gray and transparent). *Optional terminal block STB series can be easily attached to SPCM series.

• Other Boxes
• Cabinets and Boxes
• Control Panel

Low-cost waterproof pull box, BCAS series, is a highly waterproof plastic box available at a low price. 【Features】 ○ A wide variety of 39 sizes ○ Versatile plastic boxes suitable for various fields - FA and control - Electrical construction - Wiring pull boxes - Terminal relay boxes - Switch boxes For more details, please contact us or download the catalog.

• Other Boxes
• Cabinets and Boxes
• Control Panel

The product features a GORE-TEX membrane filter that is breathable and impermeable to water and dust, allowing it to adjust pressure fluctuations inside the enclosure caused by temperature differences. It has a high waterproof and dustproof performance rated at IP68 (1 hour@2-meter depth). Additionally, it promotes the release of water vapor, effectively preventing condensation inside the enclosure. 【Lineup】 Available in 3 sizes: M6, M12, and M32. M12 size is available in plastic or metal (stainless steel) material.

• Other filters
• Cabinets and Boxes
• Sealing

Mobile enclosure designed to fit comfortably in your hand with a round shape. Body is made of extruded aluminum material, and the panel is a low-cost aluminum case made of ABS resin. The main body frame is available in two colors, silver and black (without color codes), while the panel comes in six colors: black, gray, navy, lime, orange, and red, offering a total of 12 colorful combinations to choose from. Internal frame of the main body features a groove for inserting a circuit board, allowing insertion of PCBs. MX3-11-17 can accommodate our universal circuit board PCB100-160. You can now choose between two types of mounting screws: Phillips screws (indicated by the suffix P) and hexagonal screws (indicated by the suffix H). The hexagonal screws can be used as special screws for wireless devices. Product lineup: 24 sizes, 12 color variations, and 2 types of screws. *Prices vary depending on the color specifications. Please check the product number and color before making your selection.

• Cabinets and Boxes
• Data Logger
• Wireless LAN

All aluminium mobile enclosure with easy to hold rounded design. 14 different color combinations (7 panel colors - blue, green, orange, red, purple, silver, and black; and 2 frame colors - silver and black) and 24 different sizes available to choose from. Grooves are built into the internal enclosure, allowing for easy sliding/insertion of PCB boards.

• Cabinets and Boxes
• Other Boxes
• Amplifier