タカトテクニカ List of Products and Services

Air-driven diaphragm pumps are self-priming, volumetric change type pumps powered by compressed air from a compressor. They are suitable for transferring all types of liquids, including emulsions, slurries, high-viscosity liquids, and explosive chemicals. Applications: Designed for safety, they can be used in explosion-proof facilities, powered by compressed air. They operate at a pressure of 0.2 to 0.7 MPa and can be used with flammable chemicals such as solvents. They are capable of transferring corrosive liquids and are ideal for various liquid transfers of acidic and strongly alkaline chemicals (please select materials with chemical resistance suitable for the fluid being used). Maintenance is easy, with no mechanical seals to worry about, eliminating concerns about liquid leakage. The simple structure allows for easy disassembly and maintenance. As a self-priming pump, it requires no priming water. It has self-priming capability (approximately -5m for water) and can handle air mixing and dry running. Flow rate adjustment is easy and can be regulated by opening and closing piping valves or adjusting the supply air pressure. Even in the event of a closed valve operation, the pump will not be damaged. Compatible liquids: emulsions, slurries, high-viscosity liquids, explosive chemicals, etc. Compatible liquid temperature: 0°C to 60°C.

Air-driven diaphragm pumps are self-priming, volumetric change pumps powered by compressed air from a compressor. They are suitable for transferring all types of liquids, including emulsion liquids, slurry liquids, high-viscosity liquids, and explosive chemicals. Applications: Designed for safety, they can be used in explosion-proof facilities, powered by compressed air. They operate at a pressure of 0.2 to 0.7 MPa and can be used with flammable chemicals such as solvents. They are capable of transferring corrosive liquids and are ideal for various liquid transfers of acidic and strongly alkaline chemicals (please select materials with appropriate chemical resistance for the fluid being used). Maintenance is easy, with no mechanical seals, eliminating concerns about liquid leakage. The simple structure allows for easy disassembly and maintenance. As a self-priming pump, it does not require priming water. It has self-priming capability (approximately -5m for water) and can handle air mixing and dry running. Flow rate adjustment is easy and can be regulated by opening and closing piping valves or adjusting the supply air pressure. Even in the event of a closed valve operation, the pump will not be damaged. Compatible liquids: emulsion liquids, slurry liquids, high-viscosity liquids, explosive chemicals, etc. Compatible liquid temperature: 0℃ to 80℃.

Air-driven diaphragm pumps are self-priming, volumetric change type pumps powered by compressed air from a compressor. They are suitable for transferring all types of liquids, including emulsion liquids, slurry liquids, high-viscosity liquids, and explosive chemicals. Applications: Designed for safety, they can be used in explosion-proof facilities, powered by compressed air. They operate at a pressure of 0.2 to 0.7 MPa and can be used with flammable chemicals such as solvents. They can transfer corrosive liquids and are ideal for various liquid transfers of acidic and strongly alkaline chemicals (please select materials with chemical resistance appropriate for the fluid being used). Maintenance is easy, with no mechanical seals to worry about liquid leakage. The simple structure allows for easy disassembly and maintenance. As a self-priming pump, it does not require priming water. It has self-priming capability (approximately -5m for water) and can handle air mixing and dry running. Flow rate adjustment is easy and can be controlled by opening and closing piping valves or adjusting the supply air pressure. Even in the event of a closed valve operation, the pump will not be damaged. Applicable liquids: emulsion liquids, slurry liquids, high-viscosity liquids, explosive chemicals, etc. Applicable liquid temperature: 0℃ to 80℃.

Air-driven diaphragm pumps are self-priming, volumetric change pumps powered by compressed air from a compressor. They are suitable for transferring all types of liquids, including emulsion liquids, slurry liquids, high-viscosity liquids, and explosive chemicals. Applications: Designed for safety, they can be used in explosion-proof facilities, powered by compressed air. They operate at a pressure of 0.2 to 0.7 MPa and can be used with flammable chemicals such as solvents. They are capable of transferring corrosive liquids and are ideal for various liquid transfers of acidic and strongly alkaline chemicals (please select materials with chemical resistance appropriate for the fluid being used). Maintenance is easy, as there are no mechanical seals, eliminating concerns about liquid leakage. The simple structure allows for easy disassembly and maintenance. Being a self-priming pump, it does not require priming water. It has self-priming capability (approximately -5m for water) and can handle air mixing and dry running. Flow rate adjustment is easy and can be controlled by opening and closing piping valves or adjusting the supply air pressure. Even if the valve is closed during operation, the pump will not be damaged. Compatible liquids: Emulsion liquids, slurry liquids, high-viscosity liquids, explosive chemicals, etc. Compatible liquid temperature: 0°C to 60°C.

Air-driven diaphragm pumps are self-priming, volumetric change pumps powered by compressed air from a compressor. They are suitable for transferring all types of liquids, including emulsion liquids, slurry liquids, high-viscosity liquids, and explosive chemicals. Applications: Designed for safety, they can be used in explosion-proof facilities, powered by compressed air. They operate at a pressure of 0.2 to 0.7 MPa and can be used with flammable chemicals such as solvents. They are capable of transferring corrosive liquids and are ideal for various liquid transfers of acidic and strongly alkaline chemicals (please select materials with chemical resistance appropriate for the fluid used). Maintenance is easy, with no mechanical seals, eliminating concerns about liquid leakage. The simple structure allows for easy disassembly and maintenance. As a self-priming pump, it does not require priming water. It has self-priming capability (approximately -5m for water) and can handle air mixing and dry running. Flow rate adjustment is easy and can be regulated by opening and closing piping valves or adjusting the supply air pressure. Even in the event of a closed valve operation, the pump will not be damaged. Compatible liquids: Emulsion liquids, slurry liquids, high-viscosity liquids, explosive chemicals, etc. Compatible liquid temperature: 0℃ to 60℃.

A corrosion-resistant resin pump capable of transferring various chemicals. It adopts a solenoid drive system that is optimal for accurately delivering small quantities. With an IP65 equivalent waterproof performance suitable for outdoor use, it supports a power supply of 100-240V. It features a user-friendly digital display. Accessories: Foot valve x1, screw set (complete) Weight: 2.8kg Connection sizes: (Discharge side) Φ6×Φ11, (Suction side) Φ6×Φ11 Standards (IEC): IP65 equivalent Power consumption: 25W Display (operation) switching: [pulse/min]・[mL/min]・[% of Range] Power cord: 2m Functions: Lower level gauge stop suppression, level gauge contact signal Phase: Single-phase Stroke count: 1-200 times/min Stroke length: 0.0-1.0mm Transferable viscosity: 100mPa·s Transferable ambient temperature: 0-40℃

A corrosion-resistant resin pump capable of transferring various chemicals. It adopts a solenoid drive system that is optimal for accurately delivering small amounts. With an IP65 equivalent waterproof performance suitable for outdoor use, it supports a power supply of 100-240V. It features a user-friendly digital display. Accessories: Foot valve x1, screw set (complete) Weight: 2.8kg Connection sizes: (Discharge side) Φ6×Φ11, (Suction side) Φ6×Φ11 Standards (IEC) IP65 equivalent Power consumption: 25W Display (Operation) display switch: [pulse/min]・[mL/min]・[% of Range] Power cord: 2m Functions: Lower level meter stop suppression, level meter contact signal Phase: Single-phase Stroke count: 1-200 times/min Stroke length: 0.0-1.0mm Transferable viscosity: 100mPa·s Transferable ambient temperature: 0-40℃

A corrosion-resistant resin pump capable of transferring various chemicals. It adopts a solenoid drive system that is optimal for accurately delivering small amounts. With an IP65 equivalent waterproof performance suitable for outdoor use, it supports a power supply of 100-240V. It features a user-friendly digital display. Accessories: Screw set (complete) Weight: 2.8kg Connection sizes: (Discharge side) Φ8×Φ10, (Suction side) Φ8×Φ10 Standard (IEC): IP65 equivalent Power consumption: 25W Display (operation) switching: [pulse/min]・[mL/min]・[% of Range] Power cord: 2m Functions: Lower limit level meter stop suppression, level meter contact signal Phase: Single-phase Stroke rate: 1-200 times/min Stroke length: 0.0-1.0mm Transferable viscosity: 100mPa·s Transferable ambient temperature: 0-40℃

A corrosion-resistant resin pump capable of transferring various chemicals. It adopts a solenoid drive system that is ideal for accurately delivering small amounts. With an IP65 equivalent waterproof performance suitable for outdoor use, it supports a power supply of 100-240V. It features a user-friendly digital display. Accessories: Screw set (complete) Weight: 2.8kg Connection sizes: (Discharge side) Φ9×Φ15, (Suction side) Φ9×Φ15 Standards (IEC) IP65 equivalent Power consumption: 25W Display (Operation) display switch: [pulse/min]・[mL/min]・[% of Range] Power cord: 2m Functions: Lower level gauge stop suppression, level gauge contact signal Phase: Single phase Stroke count: 1-200 times/min Stroke length: 0.0-1.0mm Transferable viscosity: 800mPa·s Transferable ambient temperature: 0-40℃

A corrosion-resistant resin pump capable of transferring various chemicals. It adopts a solenoid drive system, ideal for accurately delivering small quantities. With IP65 equivalent waterproof performance, it can be used outdoors and is compatible with power supplies of 100-240V. It features an easy-to-use digital display. Accessories: siphon stop check valve, screw set (complete) Weight: 2.8 kg Connection sizes: (discharge side) Φ6×Φ11, (suction side) Φ6×Φ11 Standard (IEC): IP65 equivalent Power consumption: 25W Display (operation) switching: [pulse/min]・[mL/min]・[% of Range] Power cord: 2m Functions: lower level gauge stop suppression, level gauge contact signal Phase: single phase Stroke count: 1-200 times/min Stroke length: 0.0-1.0mm Transferable viscosity: 100 mPa·s Transferable ambient temperature: 0-40℃

The quantitative diaphragm pump is a volumetric change type pump made of PVC material, ideal for the precise injection of chemicals. It can transfer various chemicals and is a resin pump with excellent corrosion resistance. It is perfect for transferring small amounts. The flow rate adjustment features a user-friendly manual dial. It is compatible with various chemicals such as pH adjusters, disinfectants, liquid fertilizers, defoamers, and deodorants. Accessories include a foot valve and fixing screws. Material (body): PVC / (ball): ceramic / (packing): Viton / (diaphragm): PTFE.

The quantitative diaphragm pump is a volumetric change type pump made of PVC material, ideal for the precise injection of chemicals. It can transfer various chemicals and is a resin pump with excellent corrosion resistance. It is perfect for transferring small amounts. The flow rate adjustment features a user-friendly manual dial type. It is suitable for transferring various chemicals such as pH adjusters, disinfectants, liquid fertilizers, defoamers, and deodorants. Accessories include a foot valve and fixing screws. Material (body): PVC / (ball): ceramic / (packing): EPDM / (diaphragm): PTFE.

The quantitative diaphragm pump is a volumetric change type pump made of PVC material, ideal for the precise injection of chemicals. It can transfer various chemicals and is an excellent corrosion-resistant resin pump. It is perfect for transferring small amounts and is compatible with high viscosity. The flow rate adjustment features a user-friendly manual dial. It is suitable for the transfer of various chemicals such as pH adjusters, disinfectants, liquid fertilizers, defoamers, and deodorants. Viscosity: up to 800 cp. Accessories: foot valve, fixing screws. Material (body): PVC / (ball): SUS316 / (packing): EPDM / (diaphragm): PTFE.

The quantitative diaphragm pump is a volumetric change type pump made of PTFE material, ideal for the precise injection of chemicals. It can transfer various chemicals and is a resin pump with excellent corrosion resistance. It is perfect for transferring small quantities. The flow rate adjustment features an easy-to-use manual dial. It is compatible with various chemicals such as pH adjusters, disinfectants, liquid fertilizers, defoamers, and deodorants. Accessories include a foot valve and fixing screws. Material (main body): PTFE / (ball): ceramic / (packing): PTFE / (diaphragm): PTFE.

The "AODD pump" is a product that can transfer solid particles up to 9.4mm and high-viscosity liquids up to 10,000 mPa·s. It uses compressed air as its power source, allowing for flow control by adjusting the air pressure and the valve opening of the transfer piping. Even in cases of valve blockage or piping clogs, the pressure will not exceed the supplied air, significantly reducing the risk of damage or failure. Additionally, the material of the pump body can be selected according to the chemical liquid, with options including aluminum, stainless steel, PP, and PVDF. All models come standard with a PTFE specification featuring a back diaphragm, ensuring high durability. 【Features】 ■ Capable of transferring high-viscosity and slurry ■ No worries about liquid leakage ■ Self-priming pump that does not break even when running dry ■ Easy to handle ■ Safe structure with simple control ■ Diverse material models *For more details, please download the PDF or feel free to contact us.

The "DS02" is a small air-driven chemical diaphragm pump. It is widely used in industrial applications and can be utilized as a resin pump for chemical transfer in a variety of chemical transfer applications. The power source is instrument air (dry air), with product dimensions of 141×135×184(H)mm and a product weight of 1.3kg. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Model number: DS02-PPT-TPTP-03 ■ Drive method: Air-driven ■ Pump type: Diaphragm pump ■ Maximum discharge rate: 15L/min ■ Maximum discharge pressure: 0.7MPa ■ Power source: Instrument air (dry air) *For more details, please download the PDF or feel free to contact us.