ウェイブサイバー Product Lineup

The Vesmeter E-100HSV is a research measurement device that can non-destructively and with high reproducibility measure the viscoelasticity (firmness and softness) of the skin. While inheriting the performance of the conventional model (E-100HS), it is equipped with two new features: - Pressure sensor: Real-time display of measurement pressure adequacy - Angle sensor: Quantification of the probe's tilt (contact posture) This significantly reduces variability factors caused by differences in the operator's technique and environment, enabling the acquisition of highly reproducible data. Additionally, - Suction type: The skin is stretched, local stress is uneven, and it is greatly influenced by the surface condition of the subject. - Vibration type: Waveform noise can easily mix into the response. Commonly, it overcomes the challenges of other methods where the measurement results cannot be scaled because they are not physical quantities, allowing for accurate evaluation in a natural skin state. Measurements take about 3 seconds per point, and data is displayed immediately. Usability in the field has also been pursued.

• Other measurement, recording and measuring instruments

<Overview> Our YAG laser branching device is an innovative system that distributes one YAG laser welding machine into a maximum of five, allowing multiple welding operations to be performed simultaneously. It eliminates the need for multiple YAG laser units, reducing capital investment and operational costs. Automation and centralized management enhance production efficiency. <Features> ■ Increased productivity and high-quality welding - One YAG laser can perform up to five welds - Wireless LAN compatibility enables flexible integration and space-saving - Supports diverse manufacturing with up to 64 launch settings - Allows for production line expansion at low cost ■ Reduction in equipment costs and improvement in operational efficiency - Simultaneous output from three channels increases welding speed - Consistency of simultaneous output channels exceeds 95% - Smooth welding with a branching switch-over time of up to 1 second - Improved productivity with stable quality and high-speed processing

• Laser marker

- Quality control of products and materials - No samples needed, measurement and analysis on the spot - On the production line of factories - Sensor heads for silicone gel are also available, accommodating a wide range of material properties The viscoelasticity measuring device, the Besmeter, was developed to measure the characteristics of the surface layer of the specimen, such as elasticity, viscosity, and hardness, with the aim of appropriately evaluating the properties of materials. Unlike conventional measuring devices, the measurement of viscoelasticity by the Besmeter is a patented technology that realizes the measurement of viscosity and elasticity as defined in physics. ● Validation of silicone gel data From evaluation results by major chemical manufacturers Based on the viscoelastic evaluation results of silicone gel using our E-200DT and UBM's Rheogel E4000, 1. A good correlation is observed between needle penetration and hardness. 2. The correlation of elasticity, viscosity, and relaxation time changes with different types of polymers. Thus, by creating an appropriate calibration line, relative evaluation is possible. ● Custom modifications are available For example, 1. Setting measurement range according to the "hardness" of the specimen 2. Selecting sensor head materials according to application (metal, PPS resin, etc.) 3. Custom design of probe shapes

• Food Testing/Analysis/Measuring Equipment
• Analytical Equipment and Devices

The Vesmeter E-100HSV is a non-invasive, high-precision skin viscoelasticity measurement device that quantifies skin firmness and elasticity. It adds the following new features to the conventional model (E-100HS), which has been widely used in the cosmetics industry: - Pressure sensor: Automatically corrects measurement pressure - Angle sensor: Real-time detection of the contact angle of the probe As a result, it visualizes and corrects the differences in technique among measurers and the variability in testing environments, significantly improving the reliability of reproducibility in product comparisons and time-series measurements. - Suction type: Skin is stretched, local stress is uneven, and it is easily affected by the condition of the skin surface. - Vibration type: Response is prone to waveform noise interference. Commonly, since the measurement results are not physical quantities, it overcomes the challenges of other methods that cannot be scaled, allowing for accurate evaluation in a natural skin state. Measurements take about 3 seconds, with data displayed immediately on a color LCD monitor. Ease of use in the field has also been pursued. It scientifically supports the "visualization of effects" for moisturizing and anti-aging care.

• Analytical Equipment and Devices

★Saitama Prefecture Venture Company Excellent Product Contest Excellent Award Winner★ ★Free sample measurement available★ 【Portable Viscoelasticity Measuring Device】 No sample pieces required! Measurement and analysis can be done on-site. 【Key Features of the Product】 - Portable (cordless measurement unit via Bluetooth wireless communication) - No specimen required (no sample pieces needed) - One-touch (approximately 3 seconds) analysis and measurement of parameters including elasticity and viscosity of the target material - Six types of measurable data: 'Elasticity, Viscosity, Viscoelastic Modulus, Relaxation Time, Hardness, Depth' 【Measurement Principle】 After applying a slight deformation to the specimen with a constant force, the force is removed, and the behavior of the indented specimen recovering is measured with high precision. By conducting analysis based on the Voigt model, the elastic and viscous values are calculated. 【Current Adopters】 This product has been adopted by tire manufacturers, rubber product handling companies, medical institutions, public research institutions, etc., and has received high praise. It has also been cited in various academic papers. ● Contact Information Wave Cyber Co., Ltd. Tel: 048-487-8649 Mail: business@wavecyber.com

• Moisture Measuring Device

◆Device Overview The YAG laser branching device is a control unit that can branch and switch the output from a single laser oscillator into a maximum of five systems. It aims to share the device and improve the efficiency of process switching, enabling the construction of a compact and flexible laser system. It can accommodate multiple processing devices and irradiation points, contributing to the effective utilization of equipment. ◆Features - Supports automatic switching control via external signals (such as PLC) - Ensures connection stability with highly reliable FC connectors - Reduces output loss through a unique optical switching mechanism - Capable of switching up to five systems, allowing for a flexible device configuration ◆Reasons for Selection - Efficient operation of multiple processes with a single laser - Reduces setup and jig replacement labor - Flexibly accommodates retrofitting to existing equipment or specification changes - Excellent expandability and reliability, suitable for long-term operation ◆Benefits - Reduces equipment costs and installation space through device integration - Lowers workload and human errors through automatic switching - Maintains stability even during long hours of operation, minimizing maintenance burden - Increases design flexibility for line setups in low-volume, high-variety, and multi-process manufacturing

• Bonding Equipment

【High Precision × High Speed × Versatile】 Precision alignment in 0.2 seconds. This single unit can handle everything from optical communication modules to advanced optical systems. It achieves ultra-fast precision alignment. 【Simultaneous Three-Body Alignment】 LD, lens, and fiber (waveguide) are simultaneously adjusted in one step. This streamlines the process and is ideal for mass production of optical communication modules. High reproducibility of alignment is possible. 【Smart Cost Management】 By using our YAG laser switching device (model: YBU-503), one laser machine can operate up to five alignment machines. This significantly reduces the cost of equipment introduction. 【Operational Efficiency Up with Remote Monitoring】 Equipped with a system software compatible with wireless LAN. You can monitor the status of the equipment from the office. *For more details, please refer to the catalog or feel free to contact us. Wave Cyber Co., Ltd. Tel: 048-487-8649 Mail: business(at)wavecyber.com

• Laser Components

Fully Automatic Penetration Tester 'WPM-A100DT' This is a fully automatic penetration tester that evaluates the penetration distance into the test specimen with high precision automatically. By integrating laser beam technology and image processing technology, the needle tip can be accurately set on the sample surface with a precision of within 10 microns at the touch of a button. Thanks to the non-contact start technology, it achieves zero damage to the sample and eliminates measurement errors, resulting in excellent reproducibility. Additionally, surface roughness and tilt (optional) can be measured simultaneously, providing strong support for quality control and material development. 【Features】 - Non-contact start technology - Alignment through high-precision control (the needle does not touch the sample surface) - Zero damage to the sample - User calibration function (automatic numerical adjustment) - Visualization of surface information - Industry-leading operability and accuracy *For more details, please refer to the catalog or feel free to contact us. Wave Cyber Co., Ltd. Tel: 048-487-8649 Mail: business@wavecyber.com

• Optical Measuring Instruments

This is a digital line generator that superimposes crosshairs or grid lines onto composite video signals. It can be used as a marker for CCD camera aiming or low-cost positioning. The position of each vertical and horizontal line is set using a rotary encoder. *Product Features - Each of the two vertical and horizontal lines can be independently adjusted at any time. - Crossline mode that can be set arbitrarily for aiming. - No line mode.

• Analytical Equipment and Devices
• Image analysis software
• Other image-related equipment

Vesmeter quantifies the viscoelastic changes in the skin after applying lotions, creams, and serums, which could not be measured with traditional suction methods, in just about 3 seconds. With a measurement technology that provides deformations that reproduce a "real tactile sensation" close to sensory evaluation, it is an ideal tool for cosmetic development and skin research. ＼ Recommended for ／ ● Those who want to measure the effectiveness of new products and substantiate their appeal ● Those who want to verify users' sensory feedback with numerical data ● Those who want to engage in skin research and collaborative studies at universities and hospitals Main Features ● Measurement possible even after applying creams and lotions (non-suction type) ● Portable ● No sample required, direct one-touch measurement on the skin ● Simultaneous acquisition of 6 types of measurement data └ Elasticity / Viscosity / Viscoelasticity ratio / Relaxation time / Hardness / Depth ● Many adoption records in research institutions and university hospitals ● Collaborative research achievements with national universities ● Received the Excellence Award at the Saitama Prefecture Venture Company Excellent Product Contest For pricing, demos, and inquiries, feel free to contact us For product specifications, pricing, and customization inquiries, please do not hesitate to reach out. Wave Cyber Co., Ltd. Tel: 048-487-8649 Mail: business@wavecyber.com

• Moisture Measuring Device

☆Since the laser irradiation optical system and the observation CCD camera optical system are aligned on the same optical axis, the irradiation point of the YAG laser can be set accurately. Our unique imaging optical technology enables a bright optical system, efficiently achieving high-precision welding with the YAG laser on precision parts. ☆The product configuration consists of three components: the irradiation head with CCD camera, the image crossline generator, and the power adapter, allowing for immediate use.

• Welding Machine
• Laser Components
• others

Quality control of products and materials! No samples needed! Measurement and analysis on the spot! In the factory production line! The viscoelasticity measuring device, the Besmeter, was developed to measure the characteristics of the surface layer of the specimen, such as elasticity, viscosity, and hardness, with the aim of appropriately evaluating the properties of materials. Unlike conventional measuring devices, the measurement of viscoelasticity by the Besmeter is a patented technology that realizes the measurement of viscosity and elasticity as defined in physics. ● Features The Besmeter applies a slight deformation to the specimen with a constant force, and after removing that force, it directly and accurately measures the behavior of the indented specimen as it recovers. By performing waveform analysis based on the Voigt model, it calculates the elastic and viscous values.

• Food Testing/Analysis/Measuring Equipment
• Analytical Equipment and Devices

■Product Overview This device can simultaneously measure the moisture content of the biological surface, the amount of sebum secreted on the skin surface, as well as the temperature and humidity of the environment. It can be widely used for research purposes and skin counseling in stores. ■Product Features■ - The unique sensor structure integrates moisture and oil sensors. - Focused on mechanical design and measurement principles, achieving high precision and high reproducibility while minimizing variability. - With a single touch, it measures the 'moisture and sebum levels of the biological surface, as well as the environmental temperature and humidity' simultaneously. - Measurement items: 4 items (environmental temperature, humidity, skin sebum amount, and moisture amount) - Measurement results are displayed with a comprehensive evaluation in 7 levels (evaluation criteria can be changed). ■Usage Scenarios - Dermatology and beauty fields - Efficacy testing in cosmetics and pharmaceutical development - Skin counseling in stores

• others

abc

• others