MONOVATE(旧：日東金属工業) List of Products and Services

It is used by connecting to the discharge port of containers such as stainless steel hoppers. It is a valve that opens and closes by sliding a plate-like disc. The structure is simple, making it easy to disassemble and assemble during cleaning. When the valve is fully open, there are no obstacles to the flow, and the seat can match the same diameter as the discharge port. The main body is made of stainless steel, and the sealing material is only PTFE, making surface treatments like electropolishing easy. It has almost no airtightness for gases and liquids, and is unsuitable for flow regulation as it is intended only for powders and solids with fully open and fully closed applications. It is equipped with a locking function to prevent incorrect opening and closing of the valve. ○ Features - Easy to disassemble, clean, and assemble. During cleaning, it can be disassembled and assembled simply by attaching and removing the fixing butterfly bolt. No tools are required. - There are no powder accumulations, and it has an opening and closing port with the same diameter as the drain outlet. When fully open, there are no obstacles in the valve to impede the flow, allowing all fluids to pass through. - Surface treatment of the inner surface of the valve can be performed. Surface treatments tailored to the contents, such as electropolishing and fluororesin coating, can be applied. - The size and type of fittings can be freely set for both the inlet and discharge sides.

Introducing joints and valves, as well as viewing windows and lights, that make stainless steel containers easier to use. In addition to the items listed in the catalog, we also offer custom-made products in your desired shapes and sizes. Please feel free to contact us.

It is installed in the "viewing window [NM]" located on the stainless steel tank's elbow fitting and is used to check the condition inside the stainless steel container or its contents. ● Features - Drip-proof design - Uses a compact, low-heat, high-brightness cordless LED light - Comes with a clamp band for easy installation and removal. ● Lineup - Case type [LC] The LED light is housed in a stainless steel case, protecting it from corrosive splashes and contents. - Arm type [LA] With a stainless steel arm, the angle of the light can be adjusted, allowing you to direct the light to the area you want to see.

● Our comprehensive catalog of stainless steel containers features a rich lineup including storage containers, trolleys, stainless steel bottles, hazardous material transport containers, various bottles and tools, as well as functional containers such as storage containers with PTFE packing and coating containers. ● Our stainless steel containers are used in a wide range of fields, including the pharmaceutical industry, as well as in factories and laboratories in the chemical, cosmetic, and food industries for various applications such as temporary storage of raw materials and transportation between manufacturing processes. ● We also accommodate stainless steel containers with stirrers and temperature control units. ● We accept custom orders and option processing. From design to drafting and manufacturing, we carry out the process responsibly after thorough discussions with our customers. Many of our salespeople come from manufacturing backgrounds, which is one of our strengths. With extensive knowledge of materials and technology, we realize our customers' needs. For more details, please contact us!

○ Liquid Transfer Unit [LP-1] This is a lid unit for pressure vessels. It includes a pressure inlet, liquid transfer outlet, safety valve, and pressure gauge. It can be used as a lid for pressure vessels [PCN]. ○ Liquid Transfer Outlet [L-1] This is a joint that sends out liquid pushed out by pressurization. ○ Pressure Inlet [P-1] This is a joint for sending air or other gases into the container. ○ Safety Valve [S-1] This is an accessory necessary for the safe use of pressure vessels. It comes with a socket-type joint [SJ] for a Hurl connection. ○ Pressure Gauge [PV-P] It is easy to read the pressure indication and simple to handle. It comes with a socket-type joint [SJ] for a Hurl connection. ○ Pressure Inlet, Safety Valve, Pressure Gauge [PPS-P] This is a unit that includes a pressure inlet, pressure gauge, and safety valve. It comes with a dedicated joint for a Hurl connection.

This is a sight glass with a wiper that can be attached to a helix. You can check the contents inside the stainless steel container. Even when the window is fogged up with steam or when the contents splatter and dirty the window, you can maintain a clear view. When the window fogs up, simply turn the handle half a turn! The wiper blade will sweep away the fog. If your current equipment or tank lid has helix piping, it can be installed immediately. 【It is useful in the following situations】 - When heating a liquid, the sight glass fogs up with steam and you can't see inside. - During stirring, the contents splatter and dirty the window, making it impossible to see inside.

This is a sanitary valve that excels in hygiene management and is used in manufacturing environments requiring sanitary conditions, such as food, pharmaceuticals, and cosmetics. - It is a sanitary valve that eliminates concerns about liquid pooling and contamination, significantly reducing cleaning time. - The main body of the tube (connection part) is integrated with the piping connection gasket, and the liquid contact area is completely covered. - It features a zero-pocket structure with no components inside the valve (liquid contact area), achieving a completely pocketless design. - The silicone tube can be easily removed for cleaning. - It has a simple pinch valve structure that makes maintenance easy.

This is a control valve for bulk materials, also known as an iris valve. It is used as a valve for discharging and feeding bulk materials. - The choke rope on the outside allows the sleeve (valve) to open and close smoothly like a lens shutter. - The powder contact area is covered with fabric, leaving no gaps for powder to enter. - There are no sliding parts or obstacles on the passage surface, so it does not damage the contents. - It has a hygienic connection type, making it easy to connect and disconnect. - The sleeve can be easily attached and detached with one touch, allowing for simple replacement and cleaning. - Flow rate adjustment can be done freely with a handle. - The material of the sleeve can be changed according to the contents.

This is an insulated jacket for reusable stainless steel tanks. - It enhances the heat retention and cooling effect of the jacket tank with excellent insulation properties. - It reduces heat radiation from the tank, minimizing changes in the surrounding temperature. - It helps prevent burns and condensation. - It is secured with Velcro or similar materials, making it easy to install and remove, allowing for repeated use. - It can be custom-made to fit the tank.

It is used by connecting to the discharge port of a stainless steel hopper container. It is a valve that opens and closes by sliding a plate-like sliding body. The structure is simple, making it easy to disassemble and assemble during cleaning. When the valve is fully open, there are no obstacles in the flow, and the valve seat can match the same diameter as the drain port. The main body is made of stainless steel, and the sealing material is only PTFE, making surface treatments like electropolishing easy. It has almost no airtightness for gases and liquids, and is unsuitable for flow adjustment as it is only for use with powders and solids in fully open and fully closed positions. It is equipped with a locking function to prevent incorrect opening and closing of the valve. ○ Features - Easy to disassemble, clean, and assemble. During cleaning, it can be disassembled and assembled simply by attaching and removing the fixing butterfly bolts. No tools are required. - There are no powder accumulations, and it has an opening and closing port with the same diameter as the drain outlet. When fully open, there are no obstacles in the valve that would impede the flow, allowing all fluids to pass through. - Surface treatment of the inner surface of the valve can be performed. Surface treatments tailored to the contents, such as electropolishing and fluororesin coating, can be applied. - The size and type of fittings can be freely set for both the inlet and discharge sides.

This is a sight glass with a wiper that can be installed on a helix. You can check the contents inside the stainless container. Even when the window fogs up due to steam or when the contents splatter and dirty the window, you can maintain a clear view. When the window fogs up, simply turn the handle half a turn! The wiper blade will clear the fog. If your current equipment or tank lid has helix piping, it can be installed immediately. 【It is useful in the following situations】 - When heating a liquid, the sight glass fogs up with steam and visibility is lost. - During stirring, the contents may splatter, dirtying the window and obstructing the view.

This is a valve with excellent sanitary properties, used in manufacturing environments that require hygiene management for food, pharmaceuticals, cosmetics, etc. - It is a sanitary valve that eliminates concerns about liquid accumulation and contamination, significantly reducing cleaning time. - The main body of the tube (connection part) is integrated with the piping connection gasket, and the liquid contact area is completely covered. - It features a zero-pocket structure with no components inside the valve (liquid contact area), achieving a completely pocketless design. - The silicone tube can be easily removed for cleaning. - It has a simple pinch valve structure that makes maintenance easy.

This is a control valve for bulk materials, also known as an iris valve. It is used as a valve for discharging and feeding bulk materials. - The choke rope on the outside allows the sleeve (valve) to open and close smoothly like a lens shutter. - The contact area is covered with fabric, leaving no gaps for powder to enter. - There are no sliding parts or obstacles on the passage surface, so it does not damage the contents. - It is a hose connection type, making it easy to connect and disconnect. - The sleeve can be easily attached and detached with a one-touch mechanism, allowing for simple replacement and cleaning. - Flow adjustment can be done freely with a handle. - The material of the sleeve can be changed according to the contents.

This is an insulated jacket for reusable stainless steel tanks. - It enhances the heat retention and cooling effects of the jacket tank with excellent insulation. - It reduces heat radiation from the tank, minimizing changes in the surrounding temperature. - It helps prevent burns and condensation. - It is secured with Velcro or similar materials, making it easy to install and remove, allowing for repeated use. - It can be custom-made to fit the tank.

You can check the internal condition of the container by attaching it to the helix. It is safe because the glass does not fall off when removing it from the helix. It is a highly hygienic viewing window that can be completely disassembled, cleaned, and sterilized. The wetted parts are made of SUS316L, which has excellent corrosion resistance. The inner surface is tapered to maximize the field of view.

- By attaching it to the container's rules, you can check the internal condition of the container. - The low-heat, high-brightness LED light brightly illuminates the inside of the container. - The light is battery-operated and can be attached to the window, eliminating the need to carry it around or use a power cord. - The angle of the light can be adjusted to direct it to the desired position. - It is safe because the glass does not fall off when removing the window from the rules. - The liquid contact parts are made of SUS316L, which has excellent corrosion resistance. - The inner surface is tapered to maximize the field of view.

- By attaching it to the container's rules, you can check the internal condition of the container. - A low-heat, high-brightness LED light brightly illuminates the inside of the container. - The light is battery-operated and can be attached to the window, eliminating the need to carry it around or use a power cord. - It comes with a stainless steel case that protects the light from corrosive splashes and contents. - It is safe because the glass does not fall off when removing the window from the rules. - The liquid contact part is made of SUS316L, which has excellent corrosion resistance. - The inner surface is tapered to maximize the field of view.

- By attaching it to the container, you can check the internal condition of the container. - It is safe because the glass does not fall off when removing it from the container. - When you turn the handle, the inner wiper blade rotates, allowing you to wipe away dirt and water droplets. - The liquid contact part is made of SUS316L, which has excellent corrosion resistance. - The inner surface is tapered to maximize visibility.

- The liquid flow generated by the agitator creates turbulence when it hits the baffle plate, improving mixing efficiency. - It is ideal for uniformly stirring and mixing contents. - The tri-clamp connection allows for easy installation and removal. - With a sanitary design that eliminates gaps through full circumferential welding, it is easy to clean and hygienic. - If your current equipment or tank lid has tri-clamp piping, it can be installed immediately. - Custom design and manufacturing are also available.

○ The shower nozzle rotates due to water pressure, cleaning the inner surface of the container. ○ It has a low-speed rotation of 5 to 10 rpm (at 0.3 MPa), allowing the cleaning solution to be applied firmly to the inner surface of the container. ○ The cleaning nozzle and lid are connected with a helical connection that makes disassembly and assembly easy. ○ The inlet is designed with a coupler for smooth attachment and detachment. ○ The 【MF-CN】 is a set of the sealed lid 【MF】 and the cleaning nozzle. ○ The 【CF-CN】 is a set of the CTL lid 【CF】 and the cleaning nozzle.

- After attaching the socket to the torque wrench, insert the butterfly nut of the clamp band into the groove on the surface for use. - By setting the tightening torque with the torque wrench, you can prevent variations in the tightening. - This socket can accommodate clamp bands of different sizes and manufacturers. (For more details, please refer to the catalog.) - We also accept custom design and manufacturing for compatible clamp bands you are currently using.

This is a jack with casters that supports the installation and removal of valves and similar components. - It is ideal for low-position valves or heavy valves that are difficult to attach and detach by oneself. - It supports installation and removal with a platform that has a lifting function. - It has casters that make alignment and movement easy. - You can choose the material of the casters according to your needs. - The [JT/JTS-1S, JT/JTS-2S] type comes with a nozzle that can secure a helical valve. - The [JT-F/JTS-F] type has a flat top surface.

○ The interior is straight with low flow resistance, making it difficult for liquid to remain. ○ The valve is made of PTFE, providing excellent chemical resistance. ○ It features a manual lever type that can be opened and closed with one touch. ○ Disassembly and assembly can be performed while the body is still piped.

○ Disassembly and cleaning can be performed without tools, and it has excellent sanitary properties. ○ It is easy to install and remove due to the hose connection. ○ It comes with a locking function to prevent incorrect opening and closing of the valve. ○ It is lightweight and easy to handle. ○ The 【BFV-T】 is designed for tablets and has a valve covered with silicone rubber. It prevents damage to the particles during valve opening and closing.

○ The large-sized cap can be held with one hand. ○ It is easy to apply force when attaching and detaching, and can be easily removed even when in close contact with the cap. ○ It is suitable for use in areas that are prone to falling off, such as the sides and bottom. ○ The inner surface of the cap can be placed stably without making contact with the ground. ○ The liquid contact part is made of SUS316L, which has excellent corrosion resistance.

- You can clean simply by connecting the washing station to the faucet without using pumps or other devices. - It is suitable for simplifying bottle cleaning tasks and reducing labor. - Since it does not use electricity, it can be safely used around water. - By changing the orientation of the spacer, it can be used for a wide range of diameters. - If the diameter is between φ20 and 134mm, it can clean not only our stainless steel bottles but also bottles and cans. - The spray nozzle sprays evenly and in a circular pattern, allowing water to reach the dirt. - The end is fitted with a cover to prevent scratching the sink. - The base is made of stainless steel, which is resistant to rust.

Magnet filter to prevent the contamination of magnetic foreign substances. With a triangular-shaped magnet bar, it prevents the accumulation of powder particles and the re-entry of foreign substances. ○ This is a magnet filter with a hygienic connection that can be easily connected to piping, such as at the bottom of a supply hopper. ○ The triangular magnets generate magnetic force around the entire perimeter, attracting magnetic foreign substances. ○ The triangular shape allows powder particles to flow smoothly without accumulating on the magnet bar, unlike round shapes. ○ The rounded bottom corners ensure that once foreign substances are attracted, they escape to the bottom, preventing re-entry due to being pushed by powder particles. ○ The magnet bar features full perimeter welding and a smooth finish, offering excellent sanitary properties. ○ The filter exterior can be easily opened and closed with clips.

A dustpan made of all stainless steel that is resistant to rust and hygienic. It has a small contact area, allowing it to be used without wobbling even on uneven floors. - Ideal for cleaning hygienic places such as food factories and areas around water. - Dustpans can be stacked on top of each other for space-saving storage. - The 【DPS-W】 model has a drainage hole in the tray, allowing you to stand while draining excess water and collecting only the trash.

If you would like to receive a paper catalog, please request it from the official website. https://www.monovate.co.jp/shop/pages/catalog.aspx The "Stainless Steel Container Comprehensive Catalog" features a wide range of products including stainless steel storage tanks, carts, stainless steel bottles, equipment, mixing containers, and coated containers. We also accept custom-made and optional processing. No drawings are required when making inquiries. Please provide a simple illustration or similar to convey your image. We will carry out the design, drafting, and manufacturing with responsibility after thorough discussions with the customer. ● New products are available on the official website! For new product information and the latest updates, please visit the official website of Nitto Metal Industry! https://www.monovate.co.jp/shop/default.aspx

This is a sight glass with a wiper that can be attached to a helix. It allows you to check the contents inside a stainless steel container. Even when the window is fogged up with steam or when the contents splatter and dirty the window, you can maintain a clear view. When the window fogs up, simply turn the handle half a turn! The wiper blade will sweep away the fog. If your current equipment or tank lid has helix piping, it can be installed immediately. 【It is useful in the following situations】 - When heating a liquid, the sight glass fogs up with steam and you can't see inside. - During stirring, the contents splatter and dirty the window, making it impossible to see inside.

It is used by connecting to the discharge port of a stainless steel hopper container or similar. This is a valve that opens and closes by sliding a plate-like sliding body. Its structure is simple, making it easy to disassemble and assemble during cleaning. When the valve is fully open, there are no obstacles to the flow, and the valve seat can match the same diameter as the drain port. The main body is made of stainless steel, and the sealing material is only PTFE, making surface treatments like electropolishing easy. It has almost no sealing capability for gases and liquids, and is unsuitable for flow regulation as it is intended only for use with powders and solids in fully open and fully closed positions. It is equipped with a locking function to prevent incorrect opening and closing of the valve. ○ Features - Easy to disassemble, clean, and assemble. During cleaning, it can be disassembled and assembled simply by attaching and removing the fixing butterfly bolts. No tools are required. - There are no powder accumulations, and the opening and closing port has the same diameter as the drain outlet. When fully open, there are no obstacles in the valve to impede the flow, allowing all fluids to pass through. - Surface treatment of the inner surface of the valve can be performed. Surface treatments tailored to the contents, such as electropolishing and fluororesin coating, can be done. - The size and type of fittings can be freely set for both the inlet and discharge sides.

- After attaching the socket to the torque wrench, insert the butterfly nut of the clamp band into the groove on the surface for use. - By setting the tightening torque with the torque wrench, you can prevent variations in tightening. - This socket can accommodate clamp bands of different sizes and manufacturers. (For more details, please refer to the catalog.) - We also accept custom design and manufacturing for compatible products with your current clamp bands.

This is a control valve for bulk materials, also known as an iris valve. It is used as a valve for discharging and feeding bulk materials. - The choke rope on the outside allows the sleeve (valve) to open and close smoothly like a lens shutter. - The contact area is covered with fabric, leaving no gaps for powder to enter. - There are no sliding parts or obstacles on the passage surface, so it does not damage the contents. - It is a hose connection type, making it easy to connect and disconnect. - The sleeve can be attached and detached with one touch, allowing for easy replacement and cleaning. - Flow adjustment can be easily performed with a handle. - The material of the sleeve can be changed according to the contents.

A protective cover has been added to the sight glass (viewing window) installed on the container's flange. A sliding cover is attached based on the viewing window [NM]. - By attaching it to the flange of containers, you can check the internal condition of the container. - It prevents the window from breaking when external impacts occur. It also prevents dust accumulation. - In the event that the window breaks due to pressure from inside the container, it prevents the shards from scattering.

- By attaching it to the container's handle, you can check the internal condition of the container. - Unlike the window of [NM] or the window with protective cover of [NM-P], it is safe because the glass does not fall off when removed from the handle. - It prevents the window from breaking when external impact is applied. It also prevents dust accumulation. - The wetted parts are made of SUS316L, which has excellent corrosion resistance. - The inner surface is tapered to maximize the field of view.

This is a sight glass that can be connected to flanges of existing equipment. - It is a sight glass (integrated type) based on the 【NMB】 model with a helical connection, designed for flange connection. - By installing it on the flange of existing equipment, you can check the internal condition of the container without opening the lid. - The glass does not fall off when removing the sight glass from the container, ensuring safety. - It is a highly hygienic sight glass that can be fully disassembled, cleaned, and sterilized. - The wetted parts are made of SUS316L, which has excellent corrosion resistance. - The window section uses impact-resistant heat-treated glass, making it suitable for use as a sight glass for Fire Law No. 20 tanks. * When using it for a No. 20 tank, please be sure to check with the fire department of the municipality where the container is installed for approval.

A sight glass that can be connected to existing equipment flanges. It comes with a wiper that ensures visibility even if the window fogs up due to steam or splashes of contents. - This sight glass is based on the integrated 【NMBW】 wiper-equipped model with a Heilur connection, modified for flange connection. - By turning the handle, the inner wiper blade rotates, allowing you to wipe away dirt and water droplets. - By installing it on the flange of existing equipment, you can check the internal condition of the container without opening the lid. - The glass does not fall off when removing the sight glass from the container, ensuring safety. - The wetted parts are made of SUS316L, which has excellent corrosion resistance. - There is also a type without a wiper, 【NMB-5K/10K】.

- A camera is installed in the peephole, allowing for the internal conditions of the container to be photographed and recorded. - It is suitable for large tanks that cannot be viewed from the inside or when monitoring the interior of a container from a different location. - If there is an internet connection, it can be connected to smartphones, tablets, or computers for real-time monitoring. - Multiple cameras can be registered to a single device (or a single app), enabling remote management of multiple containers. - The peephole is easy to attach and detach due to the helical connection, and can be quickly installed if the container lid has a 4S helical.

- There is no need to hold the hose during water injection or when pouring liquid materials. - You can perform other tasks while injecting water, which improves work efficiency. - It prevents losses caused by the hose falling or scattering due to the hose flailing. - You can choose the type of bracket according to your application. - We also offer fittings that can be attached to the end of the hose as an option. - If you want to avoid metal contact with the container, please choose the series with pads.

This is a PDF document summarizing the product lineup of sight glasses manufactured by Nitto Metal Industry, which are used as sight glasses mounted on stainless steel tanks. It introduces a total of 13 types of products with both hose connection (NMB series/NM series) and flange connection. Additionally, it showcases custom-made sight glasses. Various specifications can be changed, such as size and material, so please feel free to contact us.

A valve specifically designed for powder and granular materials that can automatically open and close using pneumatic pressure. ○ This is a shutter-type valve equipped with an air cylinder that can automatically open and close using pneumatic pressure. ○ It is effective in processes such as filling powder and granules, as well as in the input of raw materials. ○ The exterior components are made entirely of stainless steel, and the structure is designed to prevent water from entering the cylinder interior through a scraper provided at the movable part of the cylinder. ○ It can be safely used even in food manufacturing processes where there is a possibility of water droplets coming into contact. ○ The upper part has a Heller connection, making it easy to detach. ○ The lower part has a short pipe with protrusions, making it difficult to disconnect when connecting to a chute or similar.

A valve specifically designed for powder and granular materials that can automatically open and close using pneumatic pressure. It features a double hygienic connection for easy installation between pipes. - This is a shutter-type valve equipped with an air cylinder that can automatically open and close using pneumatic pressure. - It is useful in processes such as filling powder and granular materials, as well as in the input of raw materials. - The exterior components are made entirely of stainless steel, and the structure is designed to prevent water from entering the cylinder interior through a scraper provided at the movable part of the cylinder. - It can be safely used even in food manufacturing processes where there is a possibility of water droplets coming into contact. - The double hygienic connections on both sides make it easy to attach and detach.

○ This is a shutter-type valve equipped with an air cylinder that can open and close automatically using pneumatic pressure. ○ It is effective in processes such as filling of powders and granules, and the input of raw materials. ○ The exterior components are made of all stainless steel, and the structure is designed to prevent water from entering the cylinder interior through a scraper provided at the movable part of the cylinder. ○ It can be used with confidence even in food manufacturing processes where there is a possibility of water droplets coming into contact. ○ The upper part of the valve has a Heli-Rul connection, making it easy to connect to tanks and other equipment. The 【SH-A】 model has a lower part with a short pipe that has protrusions, making it suitable for connections to chutes and similar applications.

- This is a shutter-type valve equipped with an air cylinder that can open and close automatically using pneumatic pressure. - It is useful in processes such as filling powders and granules, as well as in the input of raw materials. - The exterior parts are made of all stainless steel, and the structure is designed to prevent water from entering the cylinder interior through a scraper provided at the movable part of the cylinder. - It can be used with confidence even in food manufacturing processes where there is a possibility of water droplets coming into contact. - The upper part of the valve has a hygienic connection, making it easy to connect to tanks and other equipment. The 【SHB-A】 type has hygienic connections on both sides, making it suitable for connections between piping.

【Smooth discharge by moving powder like a liquid, reducing labor and raw material loss】 It is used by connecting air. Air flows into the hopper, promoting the discharge by fluidizing the powder. 【Structure with excellent cleaning properties to prevent cross-contamination】 The inner hopper has fine holes that allow air to be drawn in. The interior of the holes has a structure close to straight, making it easier to clean even when powder gets inside compared to multiple layers of meshes with different roughness. This reduces the risk of contamination in cases of producing multiple types on the same line or in the pharmaceutical industry, where high hygiene levels are required. 【Would you like to experience powder fluidization?】 You can experience powder fluidization using the aeration hopper at "INTERPHEX OSAKA," one of the largest pharmaceutical and cosmetic manufacturing technology exhibitions in Kansai! Please visit our booth. Event dates: February 25-27, 2025 Venue: Intex Osaka Booth location: Hall 5, 6-31 For visitor registration and other exhibited products, click here: https://www.monovate.co.jp/blog/blog/bipj-o2025/