MONOVATE(旧：日東金属工業) List of Products and Services

This is a Bernoulli flow agitator (single unit) that can be attached to a chuck-type tabletop stirrer. It is ideal for lab-scale applications such as beakers and measuring cups. - Suitable for stirring small volumes of 1L or less, such as beakers. - Capable of stirring up to 15L if the viscosity is similar to that of water. - Can be attached to a chuck-type laboratory tabletop stirrer with a shaft diameter of φ8mm. - With a total length of 500mm, the height can be adjusted according to the height and liquid volume of the material being stirred. - The agitator uses the K-type Bernoulli flow agitator BEAG, which minimizes air entrapment and foaming. - It stirs gently with low shear. - The right side of the agitator has rounded edges, allowing for even lower shear when rotated counterclockwise.

- It can stir in a sealed state with a Heller connection. Pressure reduction is also possible. - It can stir liquids with low to medium-high viscosity. - It comes standard with a waste receiver to prevent contamination from wear particles generated at the shaft seal. - The stirring body is a Bernoulli flow stirring body type BEAG E, which is less likely to incorporate air. (Patent No. 6169207) - It can be used in explosion-proof areas. - Made entirely of stainless steel, it is resistant to rust and hygienic. - It can be used without lubrication, so there is no oil splatter. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntma-s/

- It features an easy-to-remove and attach connection. - It can stir in a sealed state and is usable under both pressurized and vacuum conditions. - It can stir liquids with low to medium-high viscosity. - It comes standard with a debris collector to prevent contamination from wear particles generated at the shaft seal. - The stirring element is a Bernoulli flow stirring element type BEAG E, which is designed to minimize air entrapment. (Patent No. 6169207) - It is equipped with a standard controller that allows for speed adjustment. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntme-a/

- It is capable of stirring approximately 30 to 150 liters. - It employs a stirring body that excels in stirring without incorporating air. - It uses an aluminum electric motor that can stir at a maximum of 800 rpm (for viscosity similar to water). - A controller is included, making it easy to adjust the rotation speed. *The controller is separate. - It is a portable type that connects to the base with a clamp. - The stirrer can slide back and forth to adjust the stirring position.

- It is capable of stirring approximately 30 to 150 liters. - It uses a stirring body that excels in stirring without incorporating air. - An aluminum electric motor is used, capable of stirring at a maximum of 800 rpm (for viscosity similar to water). - A controller is included, making it easy to adjust the rotation speed. *The controller is separate. - It is a vertical type that connects to the lid of the container with a Helaur connection. - The connection between the container and the stirrer can be sealed, preventing contamination from external foreign substances.

- Capable of stirring approximately 30 to 150 liters. - Features a stirring body that excels in stirring without incorporating air. - Uses an aluminum air motor that can stir at a maximum of 1050 rpm (for viscosity similar to water). - Can be used in explosion-proof areas. - Can be used without lubrication, eliminating concerns about oil splatter. - Portable design with a clamp connection to the base. - The stirrer can slide back and forth to adjust the stirring position.

- Capable of stirring approximately 30 to 150 liters. - Utilizes a stirring body that excels in stirring without incorporating air. - Uses an aluminum air motor that can stir at a maximum of 1050 rpm (for viscosity similar to water). - Can be used in explosion-proof areas. - Can be used without lubrication, eliminating concerns about oil splatter. - Vertical type that connects to the container lid with a Heller connection. - The connection between the container and the stirrer can be sealed, preventing contamination from external foreign substances.

A stand that can hold a HeLure connection type stirrer. It is convenient as a storage place for the stirrer before and after use. ◯ You can immediately place the stirrer removed from the container, reducing the burden of work. It has casters for easy movement. ◯ It comes with a drip tray, so even if liquid drips from the shaft, it won't make a mess around it. ◯ It reduces the risk of shaft bending caused by laying the stirrer flat. ◯ It is also convenient for replacing shafts and stirring bodies, as well as for maintenance work on the stirrer. ◯ A 4.5S HeLure connection stirrer can be installed.

This is a device that attaches lever band-type CTL-36 and 43 containers and rotates them to mix the contents. It can be used for mixing powders and granules in pharmaceutical manufacturing processes that cannot be done with a stirrer, as well as for seasoning food. Since there are no stirring blades or similar components, mixing can be done without damaging the materials. The containers are rotated and mixed while remaining sealed, eliminating concerns about foreign matter contamination. Because the containers are detachable, you can simply change the container to mix the next material without taking the time to clean and dry it. You can change the container for each type of content (i.e., dedicated containers), which helps prevent cross-contamination. *This product includes the mixing machine body and one lever band-type sealed container [CTL].

The "Bernoulli Flow Stirrer" excels in agitation while minimizing foaming. It is a MONOVATE original stirrer characterized by "low foaming" and "powerful" stirring. If you are struggling with "foaming" or "insufficient stirring" in processes such as resin dissolution, chemical mixing, or paint stirring, please consider this stirrer. Customers who have adopted the Bernoulli Flow Stirrer have reported, "We were able to reduce the time required for dissolving raw materials by 30% (pharmaceutical manufacturer)." The Bernoulli Flow Stirrer comes in a wide range of options tailored to various applications, including cost-effective types and those with adjustable pressure. We also offer demo experiments for those who wish to confirm specifications before purchasing. As a manufacturer of stainless steel stirring tanks, we will select stirrers considering compatibility with tanks and contents. If you have any questions about which stirrer is suitable, please feel free to consult us.

This booklet introduces information that serves as hints for solving process challenges, primarily targeting customers who handle powders with stainless steel hoppers and equipment. The content is structured around the following three pillars: 1. "Columns" that explain basic information 2. "Case studies" where MONOVATE Corporation proposes solutions to actual customer challenges that have been adopted 3. Introduction of "products" developed based on customer challenges You can view it immediately via PDF download.