Announcement of participation in "Kokko Exhibition 2023" held from May 25 (Thursday) to May 26 (Friday) at Yamabiko Dome!

No need for deburring after cutting! Achieve hole accuracy H7 with a single drilling without the need for a pilot hole!

In response to our customers' requests, the "Zero Buri X Short for Aluminum and Resin" has been born. It is a dedicated drill for thin plate cross-hole drilling. This innovative drill allows for "burr-free" drilling with a single penetration! 【For Aluminum Short】 ▶ Material: Carbide ▶ Diameter: φ1.0 to φ16.0 ▶ Surface Treatment: DLC Coating ▶ Oil Hole: None ▶ Blade Diameter Tolerance: H7 Tolerance ▶ Compatible Materials: Aluminum, Resin, Brass, Copper, Acrylic, Acetate, Bronze, Duracon, etc. ▶ Recommended Conditions: Refer to the back of the catalog It enables burr-free drilling even in difficult areas such as pipes and curved surfaces. Additionally, we offer services such as the production of custom items tailored to customer needs, tool regrinding, additional processing, and recoating. If you have any concerns regarding other drills, please feel free to consult us anytime. We look forward to your inquiries.

• Resin processing machine

"Zero Barrier fiber" can now be manufactured in non-standard thin diameters from φ1.0 and above!! A deburring drill specifically for resin, carbon fiber CFRP, CFRTP, and UD materials!

We are pleased to announce that our popular product, Zero Buri Fiber, is now available in a non-standard size starting from φ1.0! Previously, production began at φ3.0, but we have now eliminated burrs effectively using a fine-diameter carbide drill of φ1.0, allowing us to sell it as a special item! As you can see in the attached photo, even at a magnification of 50x, it is clear that the holes are cleanly drilled without any burrs. Please take a look at the comparisons with other companies. ▶ Usage: Zero Buri: GK-HFBZ Special Item ▶ Material being processed: PP ▶ Thickness: 5mm ▶ Cutting conditions: S=3350rpm, F=250mm/min ▶ Surface treatment: Non-coated ▶ Photo magnification: 50x ▶ Target materials: PP, MC Nylon, Duracon, PVC, resin, CFRTP, GFRTP, dedicated to UD materials Zero Buri Fiber can also be used for drilling with a drill press, so please take this opportunity to try it out. With just one Zero Buri, you can achieve such clean drilling without burrs.

• Drill press
• Resin processing machine
• Other processing machines

Are you having trouble with burrs during processing? Let us introduce the mysterious drill that produces no burrs: the Zero Burr Drill X Series!

Introducing the revolutionary 【Zero Burr Drill X】 that suppresses burrs generated during drilling and machining of aluminum and molds. Are you experiencing excessive burrs on the backside of pipes that require a lot of manual work? The 【Zero Burr Drill X】 is a hybrid drill that combines a taper end mill and a reamer, capable of suppressing burrs that occur during drilling. By suppressing burrs from the outset, it leads to time savings, cost reductions, and lower labor costs. We have received many positive feedbacks from our customers who are using it. (See below) 【Features】 - No burrs produced - Capable of drilling curved surfaces and angled holes in one go - Hole accuracy H7 - Surface roughness equivalent to spiral reamers - Completes centering to reamer finishing in one drilling operation - Compatible with cross holes - Cutting conditions are 1.5 to 2 times that of Zero Burr two-flute drills - Equipped with oil holes We look forward to your inquiries.

• drill

Examples of processing polypropylene (PP) with hole drilling! Clean perforation without burrs, using a hybrid drill for fibers with multifunctionality!

Our company has developed a "mysterious drill that does not produce burrs" to solve one of the challenges in manufacturing, which is the deburring process after drilling. The Zero Burr drill is an excellent carbide drill that not only creates holes but also finishes them to be high-precision, perfectly round, and straight without any burrs. This time, we would like to introduce a processing example of Zero Burr drilling in polypropylene (PP). 【Processing Example】 ■ Tool Used: Zero Burr fiber ■ Material: PP (tool case) ■ Cutting Conditions: S=3350 F=250 ■ One-shot processing without centering or reaming ■ No melting! No burrs! This series features our innovative hybrid drill that does not produce burrs, achieving cost reduction through a decrease in the number of processes. If you are troubled by burrs, please do not hesitate to contact us. We look forward to hearing from you.

• Other cutting tools

Outstanding surface roughness with one-shot processing! We will introduce examples of machining with Zero Bary X steel!

We would like to introduce a case study of zero burr processing that our company has conducted. The tool used is "Zero Burr X Steel," and the material is SCM. The cutting conditions were S=2430 and F=95, achieving excellent surface roughness in a single pass. This series features an innovative hybrid drill produced by Giken that eliminates burrs, resulting in cost reduction through fewer processing steps. 【Processing Case】 ■ Tool Used: Zero Burr X Steel ■ Material: SCM ■ Cutting Conditions: S=2430 F=95 ■ Single Pass ■ No Burrs ■ Excellent Surface Roughness *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

With the super hard drill "Zero Bari Drill," you can drill through soft and easily meltable MC nylon without any burrs!

This is a case of perforating MC nylon using the ultra-hard drill "Zero Buri Fiber." MC nylon is prone to melting, and even with the zero burr drill (GK-HAZ) designed for aluminum and resin, fine burrs were generated. However, with the new product Zero Buri Fiber, there are truly zero burrs!! It is now possible to perforate even more cleanly and without burrs than before!! Material being processed: MC nylon Drill used: Zero Buri Fiber Model number: GK-HFBZ Although it has a special shape, it can also be re-sharpened, contributing to cost reduction for our customers. Additionally, while the Zero Buri Fiber was developed for CFRTP, it is also ideal for softer resins. Please give it a try.

• drill

Sekisui Filler Co., Ltd. will exhibit at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Automotive Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coatings - Optical adhesives We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Daiamet Co., Ltd. will exhibit at the "Automotive Technology Exhibition 2026 YOKOHAMA," held at Pacifico Yokohama from May 27 (Wednesday) to 29 (Friday), showcasing the "sintered spur gear for EV cooling modules using high-density heat treatment materials," which is mounted on the cooling module for BEVs (Battery Electric Vehicles) that won the Japan Powder Metallurgy Association's 2025 Industrial Association Award (New Product Design Category). This product is a spur gear used in the valve for switching the flow path of the cooling module for BEVs. By combining sintered materials with unique heat treatment technology, it achieves both high strength and high airtightness, addressing the issues of strength and wear resistance that were challenges with resin gears. Additionally, to tackle the airtightness issues caused by the pores inherent in sintered parts, high airtightness has been secured by optimizing the steam treatment conditions, enabling mass production. This technology is expected to see further adoption as the BEV cooling module market expands. At the venue, we will introduce a wide range of our products and technologies, including the newly exhibited sintered spur gear for EV cooling modules, cores for servo motors, various motor cores, transformers for DC-DC converters, sintered mechanical parts, and sintered oil-impregnated bearings.

The first step in DX is essential understanding and penetration into the field. While improving meter reading operations and addressing human error, we will introduce hints for achieving paperless and digital management. Last year marked the year when all members of the baby boomer generation became late-stage elderly, aged 75 and older. In industries that rely heavily on human labor, such as maintenance, this situation is serious, with indications that by 2030, more than 30% of equipment may not be maintainable. The issue of labor shortages in an aging workforce is becoming an imminent crisis, making the realization of DX in the field an urgent necessity. In this seminar, based on customer cases using the meter reading app "hakaru.ai by GMO," we will introduce hints on how to advance the DX of inspection management operations from the perspectives of building management and equipment management in manufacturing. 【Recommended for the following individuals】 - Those struggling with promoting DX in equipment management - Those feeling challenges in meter reading for equipment management or production management - Those considering advancing paperless and digitalization - Management personnel and equipment maintenance staff who want to promote DX.