〇Catalog updated〇 Active product: Manual dripping spin coater

Self-standing spin coater ACT-700AII, compatible with 360mm and 20-inch substrates, is available from the manufacturer Active!

The active "Self-Standing Spin Coater ACT-700AII" is a highly versatile manual droplet application device that supports substrates up to φ500mm. The rotation speed can be set in the range of 0 to 3000 rpm for one minute, with an accuracy of less than ±2 rpm, which is very good. It allows simultaneous setting of "rotation speed," "acceleration/deceleration time," and "keep time" for one-step operations, and features a program with 10 steps and 100 patterns (with prior notice, 20 steps and 50 patterns, or 50 steps and 20 patterns are also possible), making it easy to achieve the desired conditions. It is a self-standing model with casters for easy mobility and an ergonomic working height. Equipped with an interlock sensor, it does not rotate unless it detects the vacuum suction pressure on the substrate, and if the safety cover opens during rotation, it automatically stops the rotation, ensuring safety. Additionally, it is equipped with an emergency stop button that stops the device in free run mode. The operation panel is simple and easy to use. It comes with a clear manual, allowing immediate use after delivery. For more detailed information about the ACT-700AII, please visit the link below!

• Other semiconductor manufacturing equipment

Self-standing spin coater ACT-600AII compatible with substrates up to 300mm and 16 inches. Contact the manufacturer Active for the spin coater!

The active "Self-Standing Spin Coater ACT-600AII" is a highly versatile manual droplet application device that supports substrates up to φ400mm. The rotation speed can be set in the range of 0 to 3000 RPM, with an accuracy of less than ±2 RPM, which is very good. It allows simultaneous setting of "rotation speed," "acceleration/deceleration time," and "keep time" for one-step operations, and features a program with 10 steps and 100 patterns (with prior notice, 20 steps and 50 patterns, or 50 steps and 20 patterns are also possible), making it easy to achieve the desired conditions. It is a self-standing model with casters for easy movement and has a user-friendly working height. Equipped with an interlock sensor, it does not rotate unless it detects vacuum suction pressure on the substrate, and it automatically stops rotating if the safety cover opens during operation, ensuring safety. Additionally, it is equipped with an emergency stop button that stops the device in free run mode. The operation panel is simple and easy to use. It comes with an easy-to-understand manual, allowing immediate use after delivery. For more detailed information about the ACT-600AII, please access the link below!

• Other semiconductor manufacturing equipment

Tabletop spin coater ACT-500AII, compatible with substrates up to 220mm and 12 inches, is available from the manufacturer Active!

The active "Tabletop Spin Coater ACT-500AII" is a versatile standard machine for manual dripping, compatible with substrates up to φ300mm. The rotation speed can be set in the range of 0 to 5000 RPM, with an accuracy of less than ±1 RPM, which is excellent. You can simultaneously set "rotation speed," "acceleration/deceleration time," and "keep time" for one-step operations, and it features a program with 10 steps and 100 patterns (with prior notice, 20 steps and 50 patterns, or 50 steps and 20 patterns are also possible), making it easy to achieve the desired conditions. Due to the working height, this is the maximum cup size possible for a tabletop model; however, depending on your specifications, a dedicated stand or a free-standing model may be more user-friendly. In that case, we will provide a proposal with a quote. Equipped with an interlock sensor, it does not rotate unless it detects the vacuum suction pressure on the substrate, and it automatically stops rotating if the safety cover opens during operation, ensuring safety. Additionally, it is equipped with an emergency stop button that stops the machine in a free-run mode. The operation panel is simple and easy to use. It comes with an easy-to-understand manual, allowing you to start using it immediately after delivery. For more detailed information about the ACT-500AII, please access the link below!

• Other semiconductor manufacturing equipment

Tabletop spin coater ACT-450AII, compatible with substrates up to 180mm and 10 inches, is available from the manufacturer Active!

The active "Tabletop Spin Coater ACT-450AII" is a highly versatile standard machine for manual dripping, compatible with substrates up to φ250mm. The rotation speed can be set in the range of 0 to 5000 RPM (6000 RPM is also possible depending on the work), with an accuracy of less than ±1 RPM, which is very good. You can simultaneously set "rotation speed," "acceleration/deceleration time," and "keep time" for one-step operations, and it features a program with 10 steps and 100 patterns (with prior notice, 20 steps and 50 patterns, or 50 steps and 20 patterns are also possible), making it easy to achieve the desired conditions. The safety cover has a dripping hole (with a sliding lid) that allows dripping even while rotating. Equipped with an interlock sensor, it does not rotate unless it detects the vacuum suction pressure on the substrate, and it automatically stops rotating immediately if the safety cover opens during operation, ensuring safety. Additionally, it is equipped with an emergency stop button that stops the machine in free run mode. The operation panel is simple and easy to use. It comes with an easy-to-understand manual, allowing immediate use after delivery. For more detailed information about the ACT-450AII, please access the link below!

• Other semiconductor manufacturing equipment

Tabletop spin coater ACT-400AII compatible with substrates up to 150mm and 8 inches. Contact the manufacturer Active for the spin coater!

The Active "Tabletop Spin Coater ACT-400AII" is a cost-effective standard machine for manual dripping, compatible with substrates up to □150mm and φ200mm. The rotation speed can be set in the range of 0 to 5000 rpm (up to 6000 rpm is possible if conditions such as substrate size are met), with a precision of less than ±1 rpm, which is very good. You can simultaneously set "rotation speed," "acceleration/deceleration time," and "keep time" for one-step operations, and it features a program with 10 steps and 100 patterns (with prior notice, 20 steps and 50 patterns, or 50 steps and 20 patterns are also possible), making it easy to achieve the desired conditions. The safety cover has a dripping hole (with a sliding cover) that allows dripping even while rotating. Equipped with an interlock sensor, it does not rotate unless it detects vacuum suction pressure on the substrate, and it automatically stops rotating if the safety cover is opened during operation, ensuring safety. The operation panel is simple and easy to use. It comes with an easy-to-understand manual, allowing for immediate use after delivery. For more detailed information about the ACT-400AII, please visit the link below!

• Other semiconductor manufacturing equipment

High performance, low price! Desktop spin coater ACT-300AII compatible with up to 6-inch substrates. For manufacturers, contact Active!

The popular active model "Tabletop Spin Coater ACT-300AII" is a versatile standard device for manual dripping that can accommodate substrates up to φ150mm. Even if the size of the substrate you want to obtain a thin film from falls within the range of the ACT-220AII (the lowest-priced model), many choose this model considering that substrate sizes may increase in the future. Despite its low price, it allows you to set the rotation speed from 0 to 6000 RPM within one minute, with an accuracy of ±1 RPM or better. You can simultaneously set "rotation speed," "acceleration/deceleration time," and "keep time" for one step of operation, and it features a program with 10 steps and 100 patterns (with prior notice, 20 steps and 50 patterns, or 50 steps and 20 patterns are also possible), making it easy to achieve the desired conditions. The safety cover has a dripping hole (with a sliding lid) that allows dripping even while rotating. Equipped with an interlock sensor, it does not rotate unless it detects the vacuum suction pressure on the substrate, and it automatically stops rotating if the safety cover is opened during operation, ensuring safety. The operation panel is simple and easy to use. It comes with an easy-to-understand manual, allowing you to use it immediately after delivery. For more detailed information about the ACT-300AII, please access the link below!

• Other semiconductor manufacturing equipment

High performance, low price! The compact spin coater ACT-220AII, suitable for research and experiments, is available from the manufacturer Active!

The popular active model "Tabletop Spin Coater ACT-220AII" is the smallest manual drop-type spin coater among our standard spin coater models. Weighing approximately 18kg, it is light enough for women to carry, making it convenient to use in various locations. Despite its low price, it allows you to set the rotation speed from 0 to 7000 RPM within one minute, with an impressive accuracy of ±1 RPM or less. You can simultaneously set "rotation speed," "acceleration/deceleration time," and "keep time" for one-step operations, and it features 10 steps with 100 patterns, making it easy to achieve the desired conditions. The safety cover includes a drop hole (with a sliding lid) that allows for dripping even while rotating. Equipped with an interlock sensor, it does not rotate unless it detects the vacuum suction pressure on the substrate, and it automatically stops rotating if the safety cover is opened during operation, ensuring safety. The operation panel is simple and easy to use. It comes with a clear manual, allowing you to start using it immediately after delivery. If you have small substrates you wish to spin coat (for round substrates, up to φ100, and for square substrates, up to □70mm), please consider this model. For more detailed information about the ACT-220AII, please visit the link below!

• Other semiconductor manufacturing equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

As a celebration of the launch of tesa 88648, we are offering it at a special campaign price. Campaign period: Until the end of December 2025 *For details about the campaign, please feel free to contact us. tesa 88648 is a double-sided tape made of non-woven fabric, developed for industrial applications. It combines "strong adhesion" and "clean re-peelability," making it suitable for a wide range of substrates such as metal, plastic, and foam materials. It also excels in processability and heat resistance, meeting various needs in manufacturing sites, such as component fixation, bonding, and reusable design. ■ Examples of applications - Fixing internal components of home appliances and office equipment - Bonding metal panels and plastic parts - Fixing displays and sealing materials - Adhesion of foam materials and cushioning materials - Product development requiring recycling and re-peelable design, etc. *For product information, please download the catalog or feel free to contact us.

Prove Mind Inc. (Headquarters: 1-3-6 Hirakawacho, Chiyoda-ku, Tokyo; CEO: Satoshi Yuza) will begin offering a new design environment called "TAYURA Canvas" for its self-developed business infrastructure service "TAYURA Base" starting in early October 2025. TAYURA Canvas is built on the open-source design tool "Penpot" and is characterized by its ability to be used on dedicated company servers rather than as a public cloud service. This allows for secure collaboration with reduced risk of information leakage while sharing designs among internal and external teams. Additionally, we will provide a stable environment and support to ensure that the open-source software can be utilized in a manner suitable for corporate use. For more details about the product, please visit the following: TAYURA Canvas Product Page: https://www.tayura.com/products/canvas Full Press Release (PR TIMES): https://prtimes.jp/main/html/rd/p/000000002.000167604.html

The "EXPO2025 JPO-WIPO AWARD" is an award established for this occasion as a collaboration between the Japan Patent Office (JPO) and the World Intellectual Property Organization (WIPO) at the Osaka-Kansai Expo. Our company has been awarded as one of the recipients in the "Climate Change Category." The award ceremony will take place on October 4 (Saturday) within the venue of the Osaka-Kansai Expo during the "International Forum on Promoting the Utilization of Intellectual Property for Achieving the SDGs," and the event will be live-streamed on our YouTube channel. Judges' Award Points (Excerpt): - "SPACECOOL" achieves a solar reflectance of up to 95% and a radiative cooling rate to space of up to 95% through its unique optical design, resulting in a surface temperature reduction of 2 to 6°C compared to the ambient temperature under direct sunlight, representing a zero-energy cooling technology. In a demonstration test in Saudi Arabia, it was estimated to reduce air conditioning energy consumption by an average of 29% and CO2 emissions by 21 tons over 15 years. - In terms of intellectual property utilization, as a large corporate spin-off startup, we have acquired and secured multiple rights domestically and internationally from basic patents to applied patents since the development stage. We have built a network of applied patents for the higher concept with radiative cooling functions and are implementing an open & close strategy to balance collaborative promotion and rights protection.