Notice of Participation in the EV, HV, and FCV Technology Exhibition

We provide a comprehensive solution specialized in functional testing and EoL (End of Line) testing for various types of electric motors.

We handle "Test Systems for Electric Motors." To maintain the high quality of electric motors, which consist of rotors and stators, it is necessary to apply technical methods used in the production process for measurement and inspection. The product lineup from e.d.c. includes systems customized for inline and offline testing that enable various electrical tests during the development and manufacturing stages of electric motors and their components, allowing for the detection of insulation failures. 【Product Lineup】 ■ Stator testers for production lines (winding and hairpin) ■ Test benches for various types of rotors: permanent magnet, re-skewed, and direct winding ■ Automatic EoL motor testers with LOAD/NO LOAD testing ■ Motor load testing and lifespan simulation cycles for laboratories ■ Advanced winding and insulation quality analyzers for laboratories *For more details, please refer to the PDF materials or feel free to contact us.

• Other motors
• Other Auto Parts
• Testing Equipment and Devices

Regardless of machine dimensions or types of processing, by selecting suitable sensors and system configurations, we can detect minute defects in the micron range inline. Zero defective products!

The X series offers options for both press and rolling applications. The 'X3s (for press)' supports calibration of sensor waveforms with a maximum of 10 points and features an intelligent monitoring system equipped with a high-resolution 9-inch touch display. It is used for process monitoring, enabling optimization of production processes and improvement of work quality. Additionally, it has a positive impact on the entire machine. With multiple counter functions, it allows for detailed management and analysis of production. Furthermore, it can monitor process signals and display peak values, envelope curves, trends, and process quality.

• Other measurement, recording and measuring instruments

It is possible to produce high-quality work without damaging delicate work and without destructive testing. It is a fully synchronized system that is resilient to variations in work and environment.

Sensors and controllers using chromatic confocal measurement technology. We offer various options tailored to your work and environment. They are utilized in industries such as automotive, semiconductor, and glass worldwide. <Advantages> - Non-contact technology suitable for measuring soft or opaque materials (e.g., aluminum rolls, copper rolls, lithium-ion battery separators) - Capable of measuring layer thickness from 5µm - Wide measurement range suitable for inline use - High sensitivity and high precision (the reproducibility range of total thickness in actual applications is within 1µm) - Provision of measurement forks or a complete set of gauging equipment - Quick-SPC software option enables statistical processing and data transfer If you have the following challenges, please download the PDF and consult with us. - Variations in work or environment - Synchronization using multiple sensors - Mechanical alignment (tilt or misalignment) - Detailed understanding of measurements - Special applications requiring customization *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

Achieve high-precision non-contact measurement in seconds <Test measurement of workpieces available (please inquire)>

OptoFlash achieves high-precision measurements by acquiring and analyzing optical images. It enables fast and accurate measurements in production environments of small parts where high precision is required, such as in automotive, general manufacturing, aerospace, and medical fields. It is particularly suitable for dimension verification of electric motor shafts, electronic connectors, hydraulic circuit components, screws, and more. <Main Features> 1. Ultra-fast - The 2D optical technology enables a reduction in cycle time. - The cycle time is remarkably fast, executing 100 static measurements in just 2 seconds. 2. High flexibility - Capable of measuring a wide variety of shapes, from bolts to small shafts. - Achieves static and dynamic measurements of outer diameter, length, roundness, cylindricity, coaxiality, taper, grooves, chamfers, R (shape), shaft runout, screw dimensions, etc., in just a few seconds. 3. Ease of use - The measurement screen is user-friendly while equipped with multi-level access features, allowing level settings according to the operator's tasks and permissions. - Open loading without doors enables robot compatibility, allowing for automation without the need for an operator. 4. Durability - The fixed position of the 2D sensor eliminates mechanical stress. Measurement performance remains consistently stable over millions of cycles. - The need for maintenance is also minimized.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Optical Measuring Instruments

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.