Our ultrasonic spray nozzle, a product we handle, was featured in the semiconductor special edition.

Atomization of liquid without pressurization by piezo vibration. Enables uniform application while reducing power consumption and liquid waste.

Ultrasonic waves are transmitted to the nozzle through the vibration of piezoelectric ceramics, vibrating the liquid film to form and spray fine particles. It can handle a wide range of liquid flow rates from a minimum of 10 ml/min to a maximum of 100 ml/min, with a nearly constant particle size across the entire flow range. ◆Product Features◆ - Energy-saving as it can supply liquid with low power without pressurizing - Uniform atomization regardless of flow rate - Nearly constant particle size across the entire flow range - Resistant to clogging, ensuring high operational safety - Good coating efficiency due to the slow self-velocity of particles - Maximum flow rate for standard specifications is 100 ml/min - Operating frequency ranges from 20 to 130 kHz (varies by model) - Outer particle size ranges from 11.8 to 42 μm (varies by model) ◆Accessories◆ By using an air transport device, it is possible to freely change the spray shape of the applied fine particles (droplets). ◆Liquid Delivery Pump◆ Precise control is possible by using a syringe pump or similar for liquid delivery. ≪Key Point≫ Demo units are available for loan, so please feel free to contact us. ※※Ultrasonic Cleaning Equipment※※ Sonosis also manufactures and sells ultrasonic cleaning equipment.

• CMP Equipment
• spray
• Coating Machine

Atomize the coating liquid with piezo vibration! Minimal splatter and rebound without pressure! Compatible with a wide range of flow rates.

The Sonia Corporation's "Ultrasonic Spray Nozzle" utilizes piezoelectric vibrations to vibrate liquids. It forms fine particles and sprays them. It can accommodate a wide range of liquid flow rates from 10 mL/min to 100 mL/min, and since it does not apply pressure to the liquid, it features minimal splatter and rebound. There is no waste of the application liquid, and a large booth is not necessary. It is suitable for applications such as coating, humidifying, and disinfecting. 【Features】 - Resistant to clogging and has high operational safety - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and inexpensive running costs - Available in two types: wide spray and narrow spray. ★ We are currently offering a demo unit for you to try out! ★

• Other processing machines

A new challenge with the Sonia Corporation's low-flow ultrasonic spray nozzle!

Low Flow Ultrasonic Spray Nozzle (Atomizer) The low flow spray nozzle (atomizer) manufactured by Sonia is designed to apply droplets (particles) of various viscosities in micron and submicron sizes without over-applying them to small parts. The nozzle shape comes in two types: flat and wide nozzle tips. It is suitable for concentrated application using an ultrasonic spray nozzle and a pinpoint air transport fixture (custom order), as well as for transporting very small droplets (particles). These spray nozzles can be easily applied to applications where coating control and uniform film are required. The spray nozzle is lightweight and ideal for coating systems using robots. The main body of the spray nozzle is made of stainless steel. *Custom micro feed tubes are suitable for low flow application and are available in stainless steel or PTFE fluororesin. The spray nozzle can be equipped with a spray shaper for pinpoint spraying or a wider spray for better coating control. *Micro feed tubes are optional.

• nozzle
• Other machine elements
• Other physicochemical equipment

Spraying fine particles without pressure! Atomization through the vibration of piezoelectric ceramics!! Low power consumption and low energy costs!!

Ultrasonic waves generated by piezoelectric ceramics are transmitted to the spray nozzle (atomizer), where they vibrate the liquid film to create extremely fine particles for spraying. Liquid can be supplied and sprayed into fine particles without the need for pressurization. The flow rate varies depending on the model, but it can accommodate a wide range from a minimum flow rate of 10 ml/min to a maximum of 100 ml/min. Since pressure is not applied to the liquid, there is very little splatter or rebound, eliminating waste of the applied liquid. Additionally, there is no need for a large painting booth. This achieves a reduction in capital investment and running costs. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia Corporation.

• Ultrasonic Oscillator
• nozzle
• valve

Designed for ultra-low flow rates of 1 ml/min or less.

The stainless steel micro feed tube made by Sonia is designed for extremely low flow rates of less than 1 ml/min. *Of course, it can also be used at flow rates above 1 ml/min. The liquid flows through without touching the tip, which forms a uniform particle size. *This product is an accessory specifically for Sonia's ultrasonic spray nozzle.

• nozzle
• spray
• others

A fixture for spreading wider than a wide-angle air transport fixture.

Dove Tail Spray Shaper The Dove Tail Spray Shaper is an air transport fixture, ideal for wide-angle spraying and flux coating. It can be used with all spray nozzles of NS and WS types. By changing the position of the Dove Tail Spray Shaper, it is possible to switch from a fan-shaped spray pattern to an elliptical spray pattern. *This product is a dedicated accessory for the ultrasonic spray nozzles manufactured by Sonia Corporation.

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

Designed for fluids that have a strong impact on stainless steel, such as pharmaceutical-related applications.

The Sonia Corporation's PTFE fluoropolymer microfeed tube is designed specifically for fluids that have a strong impact on stainless steel, particularly for pharmaceutical-related applications. The liquid must be completely isolated for reasons of hygiene and chemical reactions. *This product is an accessory specifically for Sonia Corporation's ultrasonic spray nozzle.

• nozzle
• Water Hydraulic Equipment
• others

A fixture for applying particles sprayed from an ultrasonic spray nozzle over a wide area.

The wide-angle air transport fixture is a device that uses gas or air to expand the spray angle. The wide-angle air transport fixture can be attached to the Narrow Spray models 60K50T and 130K50T. There is an air supply port on the side of the wide-angle air transport fixture. By injecting gas or air, the gas or air circulates inside, causing the particles sprayed from the ultrasonic spray nozzle to spread and be pushed out. By adjusting the gas volume, air volume, pressure, and the tip of the ultrasonic spray nozzle, a spray angle of up to approximately 100° can be achieved. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia.

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

The Sonia Corporation's ultrasonic particle size generator transforms liquids into fine particles!

The ultrasonic particle generator transforms low-viscosity liquids into fine particles. Our company's compact 2.4MHz NO model 241T uses a Teflon-coated nebulizer. This device is fully microcontroller-based, allowing users to program operating parameters while handling various applications for actual particle generation. The front panel is equipped with an LCD that enables users to vary the particle generation rate from 0% to 100% in 5% increments. For special processes, such as applying small parts, a device is incorporated that can adjust the flow rate between 0-2 cfm to move particles out of the vessel where they are created. This air source and all other connections feature easily removable 304SS fittings and Teflon O-rings, allowing for easy adaptation to cleaning, external gas supply, or vacuum connections. The 304SS Tee (also available with Teflon coating) is designed to trap particles, with a small amount of airflow/gas/vacuum used to move particles from the device.

• Ultrasonic Oscillator
• Other physicochemical equipment
• others

Flow spray of 2 mmlit/min or less is possible!

Sonaer low-flow spray nozzle manufactured by Sonia Co. It can focus on small parts without waste by creating micron and sub-micron particles. There are two types of nozzles: flat and wide spray tips. These nozzles are ideal for pinpoint spray shaping, focusing particles and minimizing solution waste. With these nozzles, coating control becomes possible, easily adapting to applications that require thin and uniform application. This nozzle is lightweight, making it attractive for use in robotic coating systems. The nozzle comes in a lightweight black aluminum case (custom-made) or a stainless steel case with a stainless steel inner feed tube. The micro feed tube can be used for microliter capacities and is available in stainless steel and PTFE. The nozzle can utilize a spray shaper for pinpoint spraying, allowing for better control of your coating applications.

• nozzle
• valve
• Etching Equipment

Designed to use fast-reacting liquids and capable of stirring in a short time!

The Sonia dual micro feed tube is designed to use fast-reacting liquids and can be stirred in a short amount of time. The material is stainless steel. The dual micro feed tube has two liquid supply ports, one at the top and the other on the side. *This product is a dedicated accessory for Sonia ultrasonic spray nozzles.*

• nozzle
• others

Air transport fixture for spraying in a square or rectangular shape.

This is an air transport device designed to spray particles from an ultrasonic spray nozzle in a square or rectangular shape. Its main application is for coating purposes. By adding a small amount of gas or air, it applies to square, rectangular, or flat substrates. By adjusting the distance from the workpiece and the pressure of the transport gas or air, various sizes and shapes of spray patterns can be achieved with the ultrasonic spray nozzle manufactured by Sonia. *This product is a dedicated accessory for the ultrasonic spray nozzle made by Sonia.*

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

It precisely sprays fine particles!

The pinpoint air transport fixture generates high-quality, fine particles and can uniformly apply them to medical coatings and other small precision devices. The spray speed is slow, making it suitable for applying expensive chemicals in a thin layer with minimal use. It excels not only in coating and manufacturing applications for medical precision instruments but also in uses such as stent coating and catheter coating, providing excellent reproducibility of spray speed and particle diameter, while significantly reducing the consumption of the coating agent. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia Corporation.*

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

It is a subcutaneous solvent delivery device that can coat evenly and thinly.

Sonia's hypodermic needle spray attachment allows for precise and uniform thin coating, generating high-quality fine particles in a relatively narrow range. It is suitable not only for improving biocompatibility and drug delivery but also for preventing restenosis and thrombosis. It prevents clogging, provides uniform film thickness and density with low-speed application, and reduces wasteful coating. *This product is a dedicated accessory for Sonia's ultrasonic spray nozzle.*

• Ultrasonic Oscillator
• nozzle
• spray

A collaborative product of Rehila's nozzle technology and Sonosys's ultrasonic technology.

Particles (droplets) formed by the ultrasonic spray nozzle are broken up by the vibrations of the piezo element. In other words, unlike pressurized systems, the particles do not have speed. As a result, they either fall naturally or float due to the influence of the wind. Therefore, carrier air is used to transport the formed particles for application.

• Ultrasonic Oscillator
• nozzle
• Coating Machine

We will achieve a reduction in equipment investment and running costs.

The ultrasonic spray nozzle (atomizer) transmits vibrations from the piezoelectric ceramic, causing the liquid film to vibrate and forming fine particles for spraying. Liquid is supplied without pressure, allowing for the spraying of fine particles. It accommodates a wide range of liquid flow rates from a minimum of 10 milliliters per minute to a maximum of 100 milliliters per minute. Since no pressure is applied to the liquid, there is very little splatter or rebound, eliminating waste of the coating liquid and making large painting booths unnecessary.

• Ultrasonic Oscillator
• nozzle
• Other processing machines

The building materials required at civil engineering sites in the future will not only focus on strength and durability. We are entering an era where multiple values such as ease of construction, transportation efficiency, environmental considerations, and reducing the burden on workers are being demanded. In this context, a new option is the wooden lightweight mat "Hyper CLT Mat," which utilizes CLT (Cross Laminated Timber). The 5×10 panel weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. It can be used in a wide range of locations, including temporary roads, access routes, heavy machinery work yards, and material storage areas. Additionally, it offers environmental benefits such as reducing glare and metal noise, as well as CO2 fixation, which are unique to wood. The Hyper CLT Mat is a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) under NETIS as "TH-250021-A." As a wooden lightweight mat that combines wood, NETIS, civil engineering, and CLT, it aims to change the way construction is done from the ground up. The Hyper CLT Mat aspires to be a new building material that supports the future of construction sites.

"There are times when people are surprised that a wooden mat can support large heavy machinery." The Hyper CLT mat is a lightweight wooden mat made from CLT (Cross Laminated Timber) that is laminated in a perpendicular direction, and it is utilized even in civil engineering sites where 25-ton class heavy machinery passes. The 5×10 panel weighs about 230 kg, making it relatively lightweight and easy to install, remove, and relocate on-site, allowing for a wide range of applications such as temporary roads, access routes, and heavy machinery work yards. Additionally, due to the unique characteristics of wood, it is easier to reduce glare and metallic sounds in the summer compared to steel plates, and it also has environmental value such as CO2 fixation. Furthermore, it is registered as a **Ministry of Land, Infrastructure, Transport and Tourism NETIS registered technology "TH-250021-A,"** which can be utilized for proposing new technologies in public works. Wood, NETIS, civil engineering, CLT. The lightweight and easy-to-handle nature, along with the ability to support large heavy machinery, is a significant strength of the Hyper CLT mat.

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*