[Seminar Announcement] Ion Channel Forum 2023

An automated patch clamp system capable of meeting all needs, from small-scale screening projects to high-throughput screening.

Designed to seamlessly integrate fully automated compound screening into the drug discovery process, it provides the best performance in high-throughput screening of ion channels in drug discovery, pharmacology, safety, pharmaceutical research and development, and exploratory screening departments. Additionally, by using the 32-well mode, it can be optimized for small-scale compound screening and projects. ■ Simultaneous measurement of 384 cells ■ 20,000 data points per day ■ High giga-seal success rate ■ Supports a variety of ion channel targets and enables rapid assay system development ■ Measurement of action potentials using current clamp is also possible ■ Extracellular/intracellular perfusion is possible ■ High-speed external solution exchange (up to 110 µl/s) is possible ■ Measurement section and 12 decks can be individually temperature controlled (temperature range: 10–37°C) ■ Compound plate preparation on the deck is possible ■ Single & multi-well chips available (in-house manufactured) ■ Borosilicate glass chips reduce compound adsorption ■ Approximately 8 hours of unmanned operation is possible ■ Comes with powerful analysis software ■ Validated system for CiPA

• Other physicochemical equipment
• Analytical Equipment
• Patch clamp system

No pipetting operations are required during the experiment. It is equipped with a benchtop dispensing device that can automatically measure up to 48 cells continuously in an auto patch clamp system.

This is a tabletop-sized auto patch clamp system that can simultaneously measure up to 8 cells with giga-seal formation. With easy experimental setup, stable whole-cell recordings, and sophisticated software, it enables highly efficient compound ion channel screening. ■ Equipped with a dispensing device, allowing for fully automated experiments (measurements) ■ Simultaneous measurement of 4 cells / 8 cells (up to 48 cells can be measured continuously) ■ 250 to 600 data points per day ■ Automation from giga-seal formation to whole-cell formation ■ Compatible with voltage-dependent and ligand-dependent channels ■ Measurement of action potentials using current clamp is also possible ■ Dynamic clamp capability (optional) ■ Temperature control and extracellular/intracellular perfusion possible ■ Cooling plate allows for cooling of cells and compounds ■ Borosilicate glass chips reduce compound adsorption ■ Comes with excellent analysis software

• Other physicochemical equipment
• Analytical Equipment
• Patch clamp system

A world-class patch clamp system that is easy to operate for anyone, allowing for simple data acquisition and verification.

This is a patch clamp system of the world's smallest class that can perform gigaseal recordings, optimal for safety testing/toxicity testing/pharmacological testing/screening of compounds at the cellular level in the functional structural analysis of ion channels, research on related diseases, and drug development processes. 【Features】 ■ No need for manual patch clamp experience or difficult operations ■ No need for microscope, vibration table, manipulator, Faraday cage, or puller ■ 20 to 50 data points per day ■ Automation from gigaseal formation to whole cell formation ■ Compatible with voltage-dependent, ligand-dependent, and temperature-dependent channels ■ Options available for research on channel rhodopsins and mechanosensitive channels using light stimulation ■ Measurement of action potentials using current clamp is also possible ■ Supports a wide range of applications and enables rapid assay system development ■ Reduces compound adsorption with borosilicate glass chips ■ Optional temperature control (10 to 50°C), capable of extracellular/intracellular perfusion ■ Can be integrated with amplifiers such as HEKA and Axon *For details, please refer to the catalog available for download in PDF.

• Other physicochemical equipment
• Analytical Equipment
• Patch clamp system

A patch clamp system that incorporates a patch clamp amplifier, achieving miniaturization and reduction of installation costs, allowing for easy data acquisition and verification.

This is a world-class patch clamp system capable of performing gigaseal recordings, optimal for safety testing/toxicity testing/pharmacological testing/screening of compounds at the cellular level in the functional structural analysis of ion channels, research on related diseases, and drug development processes. ■ No experience with manual patch clamping or difficult operations required ■ No need for microscope/vibration isolation table/manipulator/Faraday cage/puller ■ 20 to 50 data points per day ■ Automation from gigaseal formation to whole cell formation ■ Compatible with voltage-dependent and ligand-dependent channels through pipetting ■ Measurement of action potentials using current clamp is also possible ■ Supports a wide range of applications, enabling rapid assay system development ■ Reduces compound adsorption with borosilicate glass chips

• Other physicochemical equipment
• Analytical Equipment
• Patch clamp system

Easily measure channel activity at the molecular level.

【Measurement Target Examples】 Ion channels (voltage-dependent, ligand-dependent, temperature-sensitive), DNA nanopores, antimicrobial peptides, toxins, etc. In experiments using artificial lipid bilayers, the formation of lipid membranes, reconstitution of membrane proteins, and measurement of single-channel currents can be easily performed. Purified target membrane proteins (such as ion channels in vivo or artificial ion channels) can be reconstituted on artificially formed lipid bilayers, allowing for the evaluation of drug effects and functional/structural analysis. ■ Simultaneous formation and measurement of 4 channels of artificial lipid bilayers is possible ■ Lipid membranes can be formed with just pipetting operations ■ No need for microscope, vibration isolation table, manipulator, or Faraday cage ■ Direct reconstitution of target membrane proteins or membrane fusion with proteoliposomes ■ Temperature control (10–50°C) available (optional) ■ Palm-sized, easy connection via USB

• Other physicochemical equipment
• Analytical Equipment

Easily measure channel activity at the molecular level.

【Measurement Target Examples】 Ion channels (voltage-dependent, ligand-dependent, temperature-sensitive), DNA nanopores, antimicrobial peptides, toxins, etc. Experiments using artificial lipid bilayers allow for easy formation of lipid membranes, reconstitution of membrane proteins, and measurement of single-channel currents. It is possible to reconstitute purified target membrane proteins (such as ion channels found in vivo or artificial ion channels) on artificially formed lipid bilayers for drug action evaluation and functional/structural analysis. By rapidly and automatically forming 16-channel artificial lipid bilayers at once and conducting fully simultaneous measurements, researchers are freed from the burdens of the painting method in experiments using artificial lipid bilayers. ■ Simultaneous formation and measurement of 16-channel artificial lipid bilayers is possible ■ Automatic lipid membrane formation using a stirrer bar ■ No need for microscope, vibration isolation table, manipulator, or Faraday cage ■ Direct reconstitution of target membrane proteins or membrane fusion with proteoliposomes ■ Temperature control available (10–50°C)

• Other physicochemical equipment
• Analytical Equipment

Direct measurement of transporter currents in a label-free and real-time manner without using fluorescent probes or radiolabeled ligands.

Currently, the mainstream method for evaluating transporter activity is the uptake assay using RI-labeled substrates. However, there are several issues, such as the need for specialized experimental facilities, the complexity of waste liquid treatment, the fact that the desired substrates are not always commercially available as RI-labeled, and the measurement of endpoints after uptake. SURFE²R (Surface Electrogenic Event Reader) technology does not require RI labeling, specialized experimental facilities, or waste liquid treatment, and it allows for real-time evaluation of the activity of transporters (symporters, exchangers, unipoters) and pumps. ■ Direct measurement of transporter currents using Solid Supported Membrane (SSM) ■ Experiments can be conducted using membrane fragments prepared from biological membranes or proteoliposomes reconstituted with the target membrane proteins ■ Light stimulation is possible (optional) ■ An all-in-one device that integrates a dispensing machine, measurement section, and computer ■ 150 data points per day

• Other physicochemical equipment
• Analytical Equipment
• Other Analysis

Direct measurement of transporter currents in a label-free and real-time manner without using fluorescent probes or radiolabeled ligands.

Currently, the mainstream method for evaluating transporter activity is the uptake assay using RI-labeled substrates. However, there are several issues, such as the need for specialized experimental facilities, complicated waste disposal processes, the fact that the desired substrates are not always commercially available as RI-labeled, and that the endpoint is measured after uptake. The SURFE²R (Surface Electrogenic Event Reader) technology does not require RI labeling, does not need specialized experimental facilities or waste disposal, and allows for real-time evaluation of the activity of transporters (symporters, exchangers, unipoters) and pumps. ■ Direct measurement of transporter currents using Solid Supported Membrane (SSM) ■ Experiments can be conducted using membrane fragments prepared from biological membranes or proteoliposomes reconstituted with the target membrane proteins ■ Simultaneous measurement in 96 wells ■ 10,000 data points per day

• Other physicochemical equipment
• Analytical Equipment
• Other Analysis

Measurement of impedance and extracellular potential of iPS-derived cardiomyocytes.

This is a hybrid cardiotoxicity screening device capable of impedance measurement and extracellular potential measurement similar to MEA. It can detect not only cardiomyocytes but also the minute contractions of cancer cells and liver cells due to the effects of compounds. ■ Simultaneous measurement of impedance and extracellular potential ■ 96-well simultaneous measurement ■ Label-free measurement ■ Long-term monitoring capability ■ Electrical pacing & optical pacing (optional) ■ Comes with an incubation system (temperature, humidity, and CO2 control) ■ Includes multifunctional and excellent data analysis and graph creation software ■ Validated human iPS cells: iCell, iCell², AXOL CM, Cardiosight-S, MiraCell Cardiomyocytes, etc. ■ Compact desktop size: W20.5 x D18 x H11.7cm / 3.5kg (main unit)

• Other physicochemical equipment
• Other Analysis

The Langeendorff method has been transformed into the latest high-throughput technology, allowing for the measurement of contractile force in cardiomyocytes under physiological conditions similar to the natural environment of cardiac tissue.

The FLEXcyte 96, which transforms the conventional Langendorff method into the latest high-throughput technology, can measure the contractile force (mN/mm²) of cardiomyocytes for cardiotoxicity and safety evaluation, as well as drug screening, under physiological conditions similar to the native cardiac tissue environment, without missing even slight responses to cytotoxicity, regardless of whether in the chronic or acute phase, simultaneously in 96 wells. ■ Simultaneous measurement in 96 wells ■ Label-free measurement ■ Long-term monitoring possible ■ Optical pacing (optional) ■ Comes with an incubation system (temperature, humidity, CO2 control) ■ Includes multifunctional excellent data analysis and graphing software ■ Validated human iPS cells: iCell, iCell², AXOL CM, Cardiosight-S, MiraCell Cardiomyocytes, etc. ■ Compact desktop size: W20.5 x D18 x H11.7cm / 3.5kg (main unit)

• Other physicochemical equipment
• Other Analysis

[Speaker] Masashi Sugita, President and CEO of LEX Style Co., Ltd. [Key Lecture Content] The power consumption of AI servers used in data centers has significantly increased, making traditional air cooling insufficient for operation. This lecture will organize the requirements for introducing a liquid cooling system into air-cooled data centers and explain the implementation method using free cooling with specific design details. When handling high-density AI servers, energy efficiency is required, and the widely used energy efficiency indicator, as well as the Ministry of Economy, Trade and Industry's Resource and Energy Agency's PUE regulation of "1.3 or below," will be explained along with practical operational insights. [Lecture Items] 1. Heat dissipation methods for high-density, high-heat AI servers 2. Basics and importance of PUE/pPUE 3. PUE regulation of "1.3 or below" by the Ministry of Economy, Trade and Industry's Resource and Energy Agency 4. AI server implementation and requirements for new data centers 5. Summary and future outlook 6. Q&A / Business card exchange

[Key Lecture Content] 1. Promotion of SAF Introduction Yasushi Yamashita, Director, Carbon Neutral Promotion Office, Aviation Bureau, Ministry of Land, Infrastructure, Transport and Tourism 1. Importance of SAF in the decarbonization of the aviation sector 2. Initiatives to promote the introduction of SAF 3. Q&A / Business card exchange 2. Japan Airlines' Challenge Towards Net Zero CO2 Emissions by 2050 Kazuki Hirotani, Group Leader, GX Planning Group, Sustainability Promotion Department, Japan Airlines Co., Ltd. 1. Introduction of our five initiatives for CO2 emission reduction 2. Initiatives for reducing fuel consumption (introduction of fuel-efficient aircraft, operational improvements) 3. Initiatives for fuel transition (sustainable aviation fuel SAF) 4. Initiatives for reductions outside the value chain (carbon credits, new removal technologies) 5. Initiatives to deepen collaboration with society 6. Q&A / Business card exchange

[Instructor] Yuichiro Kabushiki, Partner Lawyer at TMI Comprehensive Law Office [Key Lecture Content] With the spread of AI, there is growing attention on the civil liability of developers, providers, and users of AI. The Ministry of Economy, Trade and Industry will publish "Guidelines on the Interpretation and Application of Civil Liability in AI Utilization" in April 2026, and the Ministry of Justice will also establish an expert meeting to examine civil liability related to unauthorized use of images and voices generated by AI in the same month. As the full enforcement of the AI Promotion Act and the revision of AI guidelines are underway, it is necessary to design and operate governance based on the potential responsibilities that may arise retrospectively. In this seminar, based on the guidelines from the Ministry of Economy, Trade and Industry and drawing on litigation practice experience as a judge and lawyer, we will organize the basic framework for assessing civil liability and explain fundamental methods for designing and operating governance based on risk analysis. Furthermore, we will examine the framework for civil liability and the design and operation of governance using hypothetical cases that are likely to pose practical issues.

In this seminar, we will welcome Mr. Satoru Hayami from Waseda University, who will explain the latest trends in AI utilization in manufacturing, as well as the evolution of technologies such as agent-based AI and physical AI, and the opportunities and key points for practical application in the manufacturing industry. Furthermore, Mr. Tsubasa Shibata, representative of Next Opt, will introduce processes aimed at practical implementation, incorporating actual case studies from manufacturing sites. We hope you will envision the "potential for AI utilization in your company" and take home hints that will lead to improvements in your operations starting tomorrow. We look forward to your participation.

☆ Date and Time ☆ Ongoing until August 31, 2026 (Monday) 　　https://www.nttd-bb.com/event/smn20260831c.html?utm_source=ipros&utm_medium=other&utm_campaign=20260625_sales ☆ Venue ☆ Online Seminar, Free Participation Fee ☆ Seminar Content ☆ 　Are you manually executing WinActor scenarios every time? 　This seminar is for customers like you! 　In fact, by utilizing the Windows standard feature "Task Scheduler," 　it is possible to automate the execution of scenarios! 　In this seminar, we will clearly introduce how to automatically execute WinActor scenarios at scheduled times. 　The content is designed to be approachable even without specialized knowledge, 　making it a recommended seminar for those who want to improve daily operations! <Target Audience> ・Those who want to deepen their knowledge of WinActor 　・Those who wish to automate scenario execution 　・Scenario creators without programming or system development experience