Announcement of a WEB seminar for solving your problems!

No actual substrates or devices are needed! By simulating the takt time of the printed circuit board splitting process in advance, you can calculate a production quantity that is closer to actual production!

When EMS manufacturers take on printed circuit board production from customers, it is necessary to estimate the tact time and equipment costs based on the design drawings. Many seem to be troubled by issues such as: ◆ The need to create programs based on the drawings and operate the cutting machine for measurements. ◆ Not having a board cutting machine, which leads to considerations of production quantities based on estimated values. In response, our company offers a free simulation service that can calculate even without actual boards or equipment, based on CAD data, PDF drawings, photos, etc. Since you can understand the approximate cutting time, it becomes possible to grasp the cutting time of the board cutting process in advance when introducing assembly line processes and to calculate production quantities that are closer to actual production. *When using our equipment. 【Reasons to choose our service】 ■ No need for actual boards / equipment ■ Simulation of cutting time calculation for the board cutting process ■ Confirmation of cutting paths for printed circuit boards ■ Suitable for those considering the introduction of new board cutting machines or equipment for updates/increased production. *For more details, please feel free to contact us.

• Printed Circuit Board
• Circuit board processing machine
• Other services

Improvement of productivity through parallel setup in the printed circuit board division process, also accommodating inline production processes!

By being able to prepare the next workpiece in parallel during substrate processing, we can eliminate waiting time during substrate exchanges. Additionally, by shortening the cycle time, productivity can be improved without increasing the number of operators. The entire process of supplying printed circuit boards, cutting the substrates, and palletizing the cut substrates onto discharge trays can also be automated. (Substrate cutting machine + robot transport system) 【Features】 ■ Equipped with a dual-table automatic turn system that allows for parallel setup ■ Adaptable to general inline specifications through the use of robots ■ Reduction of cutting time through Z-axis height settings for each router location ■ Improved operating rate by monitoring the usage distance of bits and automatically replacing them ■ Built-in dust collector for compact device size *For more details, please download the PDF or contact us. ★ For those interested in the single type, click here▽ https://mono.ipros.com/product/detail/2000569194 ★ Free seminar here▽ http://www.mtco-web.co.jp/products/web_seminar.html

• Printed Circuit Board
• Other processing machines
• Circuit board processing machine

【Monthly Web Seminars Now Held!】Automating the processes from PCB supply to PCB cutting, palletizing onto output trays, and PCB discharge!

The "PCB Cutting Machine Robot Transport System" can accommodate inline PCB cutting by connecting with the preceding and following processes. Additionally, it can handle batch processing by consisting of a magazine for loading PCBs and a magazine for storing the cut PCBs in trays. With the turntable PCB cutting machine (MR2535H2T) and a robot with a traveling axis, it contributes to reducing takt time, while also expanding the flexibility of the line layout and tray packing of printed circuit boards after cutting, thereby aiding in the automation and labor-saving of factory production. 【Features】 - The line configuration can flexibly adapt to factory layouts, including straight, U-shaped, and L-shaped arrangements. - The multi-joint robot allows for the discharge of cut PCBs, enabling the setting of PCB placement positions in the discharge tray, which is effective for PCB positioning in the next automation process. *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• Other processing machines
• Circuit board processing machine

High-quality fine printing is possible! Laser marking device for substrates compatible with a wide range of materials.

The substrate marking device is a laser-based substrate marking machine capable of directly marking serial numbers, origin, and two-dimensional codes or characters for process management using a laser marker. In addition to being equipped with a variety of functions, it also offers a range of options that enable integration with traceability systems. 【Features】 ■ High-speed marking of fine characters, 2D codes, and shapes at any position on printed circuit boards ■ More stable print quality compared to stamping methods ■ In the case of fiber lasers, it can accommodate a variety of materials such as metals and ceramics, allowing for higher precision printing compared to CO2 lasers ■ Creation of flexible printing programs in parallel with production at a workstation away from the PCB manufacturing line using Excel * Fiber lasers do not require permission applications as they are not subject to high-frequency utilization equipment regulations, making them easier to implement compared to conventional machines. * Microsoft and Excel are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. * For more details, please download the PDF or contact us.

• Marking machine
• Laser marker
• Other markings

Standalone type with high rigidity and quality, equipped with e-F@ctory utilization error prevention features, automatic router bit exchange, and image teaching capabilities.

The "MR2535H2" is a device that divides multiple small and complex-shaped circuit boards using a router method. It can cut printed circuit boards with low stress, thereby reducing the risk of damage to mounted components (such as multilayer ceramic capacitors) caused by stress in traditional hand-breaking or pressing methods. By utilizing automation and IT technologies cultivated at Mitsubishi Electric's Nagoya Works for equipment design and manufacturing, it supports improvements in factory productivity and quality. 【Features】 ■ Cuts unnecessary parts of complex-shaped printed circuit boards after mounting using a router bit ■ Improves setup efficiency by widening the opening width of the device's access door ■ Achieves space-saving by incorporating a dust collector within the device's lower section ■ Significantly enhances productivity by increasing the movement speed of the X-Y axis (three times faster than our conventional models) ■ Allows for setting the Z-axis position for each cutting point, enabling shorter takt times ■ Supports image teaching functions for setting cutting points on various types of circuit boards *For more details, please download the PDF or contact us.

• Circuit board processing machine

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.