Change the product name from "Detachable Panel" to "Removable Machine Hatch."

It is a standard machine hatch.

A detachable machine hatch that allows for an opening size that is difficult to achieve with a door. Since some work is required for detachment, it is a condition that the frequency of opening and closing is low. Additionally, the internal aluminum frame of the TH40 is sturdier and can accommodate larger sizes compared to the TH30. When the height dimension increases, it is recommended to use a plus bar to increase the engagement with the outer frame. ◇TH40◇ The TH40 can accommodate a large size with an effective height dimension of 4500mm. Multiple machine hatches can be removed one by one and then put back in place. The three-sided frame specification is affected by floor irregularities, so it is necessary to ensure a level floor. The four-sided frame specification, which emphasizes airtightness, often has the lower frame getting in the way, so it is common to make the lower frame detachable. Additionally, when the height dimension increases, it is recommended to use a plus bar to increase the engagement with the outer frame. ◇TH30◇ The TH30 accommodates an effective height dimension of up to 3000mm. Its basic functions are the same as those of the TH40. Since some work is required for detachment, it is a condition that the frequency of opening and closing is low.

• aluminum
• Other clean room equipment and facilities
• others

No unevenness, easy to manage hygiene! Full flat machine hatch.

Flat design machine hatch with minimized protrusions ◇THF40◇ Windows and doors installed on the walls of clean rooms need to eliminate protrusions that could obstruct airflow as much as possible. This is a flat design removable machine hatch that reduces the number of tightening handles and grips for each panel. Additionally, even for tall machine hatches, no ladder or similar equipment is required for installation and removal. ◇THF50◇ Typical removable machine hatches have exposed tightening handles and grips to secure the removable panels. In clean rooms, dust can accumulate on these hardware protrusions, and the protrusions can disrupt airflow within the clean room, potentially affecting product quality. The full flat type removable machine hatch "THF50" features a design that minimizes surface protrusions to the utmost, clearing the highest grade of airtight performance according to JIS, which is grade A-4. It is the ultimate removable machine hatch for clean rooms, ideal for industrial clean rooms (ICR) in semiconductor and precision manufacturing, as well as for bio clean rooms (BCR) that consider GMP and HACCP standards.

• aluminum
• Other clean room equipment and facilities
• others

Resin-made insulated machine hatch for low-temperature clean rooms

- A wall that can be removed only when necessary - A detachable insulated machine hatch that is less prone to condensation even in low-temperature rooms! In a clean room with lowered temperatures, when an opening for the entry and exit of machinery is needed, it is essential to avoid the use of aluminum materials as much as possible from the perspective of preventing condensation. The TIH40 model, which uses synthetic resin for all frame materials, suppresses condensation phenomena on panels and outer frames caused by thermal conduction. The appearance is almost the same as that of an aluminum detachable machine hatch, featuring a smart finish.

• Other clean room equipment and facilities
• others

Outstanding visibility and stylish! A machine hatch with excellent display effects.

It is ideal when expecting display effects with a detachable machine hatch. Even for the installation of large windows, which can often look awkward with panel types, TK offers a smart see-through type. By assembling transparent resin panels within the frame, a smart see-through type machine hatch is achieved.

• aluminum
• Other clean room equipment and facilities
• others

When wood is used at civil engineering sites, people often express surprise, asking, "Is this made of wood?" While many people associate "sheets" with steel plates, the sight of large wooden sheets lined up creates a strong impact at the site. Hyper CLT sheets are wooden lightweight sheets made from CLT (Cross Laminated Timber) that is laminated in a perpendicular direction. A 5×10 sheet weighs about 230 kg, making it relatively lightweight and suitable for use in temporary roads, access routes, heavy machinery work yards, and material storage areas. The natural color and texture of wood blend well with the landscapes of forests, rivers, parks, and residential areas, clearly conveying that the construction is environmentally friendly. The presence of wood can also serve as a catalyst for information dissemination in site tours and promotional photographs. Hyper CLT sheets are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology "TH-250021-A." Wooden sheets, NETIS, civil engineering, CLT, wooden lightweight sheets. The unexpected use of wood in civil engineering expands the impression of the site and the potential of new materials.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

The HDZ-0201 is a hydrogen leak detector designed for installation in equipment. It is used to measure the overall leakage from the entire inspected item (workpiece). - The atmospheric pressure chamber method involves covering the workpiece with a chamber, filling the inside of the workpiece with tracer gas, allowing the leaked gas to accumulate in the chamber, stirring the leaked gas, and forcing circulation to measure the gas concentration with a hydrogen detector. - The vacuum chamber method allows for high-sensitivity measurements by evacuating the chamber and then introducing atmospheric air into the chamber, directing the gas to the hydrogen detector. There are two methods available. It features a compact and lightweight design that is easy to integrate into equipment. Additionally, its concentration resolution capability is ultra-high sensitivity up to 0.1 ppm (depending on set conditions and environmental conditions). Detection principle: Semiconductor type Detection sensitivity: Equivalent to 1×10⁻⁶ Pa·m³/s (depending on inspection conditions and measurement environment) Usage: Equipment-integrated type (dedicated for installation in equipment) Resolution: 0.1 ppm Power supply voltage: DC 24 V External dimensions: W 93 × D 91 × H 97 mm

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.