CPhI Japan Exhibition & Seminar!

Quality assessment of proteins, nucleic acids, AAV, LNP, etc. is possible with trace amounts and high throughput.

"Stunner" is a product that allows simultaneous acquisition of UV/Vis concentration, dynamic light scattering (DLS), and static light scattering (SLS) data from a 2μL identical sample. It enables detailed investigation of AAV and adenoviruses to measure total capsid titer and Empty/Full ratios, as well as to obtain payload concentration and size data of lipid nanoparticles all at once. You can analyze concentration, hydrodynamic size, polydispersity, and the presence of aggregates collectively, allowing you to assess the quality of proteins. This way, you can immediately determine whether your AAV, adenoviruses, lipid nanoparticles, or proteins are suitable for your purposes. [Features] ■ Measure up to 96 samples in a batch in 60 minutes*/12 minutes** *When measured by DLS **When measured by UV/Vis only [Applications] ■ AAV/Adenovirus capsid titer ■ AAV/Adenovirus Empty/Full ratio ■ Lipid nanoparticle (LNP) payload amount ■ Aggregate measurement ■ Concentration measurement ■ Sizing & polydispersity ■ B22 & kD *For more details, please refer to the PDF document or feel free to contact us.

• Other protein analysis

Simultaneous measurement of 12 applications such as thermal stability, sizing, and viscosity from trace samples.

"Uncle" is a product that allows for the acquisition of more data with a small amount of protein. The required sample volume is only 9μL. By combining three different measurement modes—fluorescence, SLS, and DLS—it is easy to evaluate the optimal formulation and the stability of proteins or viral vectors. 【Features】 ■ Measure up to 48 samples in as little as about 2 hours with just 9μL. 【Applications】 ■ Tm & Tagg ■ Tm via SYPRO DSF ■ Isothermal stability ■ Sizing and polydispersity ■ Sizing via thermal gradient ■ Refolding measurements ■ Viscosity ■ kD ■ B22 ■ G22 ■ ΔG ■ Stability of viral capsids *For more details, please refer to the PDF document or feel free to contact us.

• Other protein analysis

No complicated workflows needed! Only 2μL of sample volume required. Measure up to 96 samples in just 5 minutes.

"Lunatic" is a product that allows for easy simultaneous quantification of proteins, DNA, and RNA. The required sample volume is only 2μL, and up to 96 samples can be measured in 5 minutes. High-concentration samples can also be measured directly without dilution. 【Features】 ■ Measure 2μL, up to 96 samples in 5 minutes ■ Dynamic range coverage from 0.02 to 200 mg/mL* *for mAb ■ Outstanding accuracy and precision ■ Automation is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment
• Other protein analysis
• Other measurement and measuring equipment

Up to 8 samples can be processed simultaneously! Automatic and hassle-free buffer exchange and concentration that used to be complicated!

Buffer exchange and concentration must be performed as a sample preprocessing step. This is a labor-intensive task that takes a long time, requiring your presence throughout the process. "UNAGI" is a fully hands-free benchtop buffer exchange solution designed to take over this tedious task. It can process up to 8 samples simultaneously. The software is very easy to operate, allowing you to be anywhere during the work, eliminating the need to stay in the laboratory the entire time. 【Features】 ■ Simultaneous processing of up to 8 samples ■ Efficient solvent removal prevents sample adsorption, achieving over 96% recovery rate ■ Built-in recipes for UF/DF buffer exchange ■ User-friendly software ■ Concentrates up to 8 diluted samples from 48mL to 8mL in one go *For more details, please refer to the PDF document or feel free to contact us.

• Other Protein Research Software
• DNA analysis

[Video Available] Are you spending a lot of time and effort on buffer exchange and concentration work? You can streamline the sample preprocessing steps with this device.

Buffer exchange and concentration must be performed as a pre-treatment of the sample, which is a time-consuming task. This process takes a long time, and you have to be present the entire time. "UNAGI" is a fully hands-free benchtop buffer exchange solution designed to perform this tedious task for you. You can be anywhere during the process, eliminating the need to stay in the laboratory the whole time. 【Features】 ■ Simultaneous processing of up to 8 samples ■ Efficient solvent removal to prevent sample adsorption, achieving over 96% recovery rate ■ Built-in recipes for UF/DF buffer exchange ■ User-friendly software ■ Concentration of up to 8 diluted samples from 48mL to 8mL in one go *For more details, please refer to the PDF document or feel free to contact us.

• Other Protein Research Software
• Other filtration and separation equipment

Significantly reduces the effort and time spent on buffer exchange and concentration.

"BIGTUNA" is a high-throughput fully automated buffer exchange and concentration device that can automate buffer exchange with a setup time of just 30 minutes, accommodating a wide range of sample numbers and volumes. We offer two types of plate-based filters that can simultaneously exchange and concentrate 24 or 96 samples. With easy setup, you can have better control over your experiments and significantly reduce manual labor time. You can step away from the tedious task of buffer exchange and use the extra time for what you truly want to do. 【Features】 ■ Free yourself from manual buffer exchange ■ Accommodates a wide range of sample numbers and volumes ■ Processes at an optimal buffer exchange rate ■ Automatically concentrates from 48mL to 8mL ■ Easy condition settings *For more details, please refer to the PDF document or feel free to contact us.

• Other concentrating equipment

Efficient mass production of LNPs - Supporting everything from small-scale condition testing to scale-up.

Once we succeed in finding the optimal formulation conditions for sunscreen, let's use Sunshine to adjust the size of the LNP. Furthermore, we will optimize the protocols and processes for scaling up. We will find the ideal flow rate and explore different mixing options. Next, we will adjust these to the appropriate dilution factor that can keep them stable. Once everything is in place, Sunshine will transition to continuous mode, allowing us to produce several dozen liters in a day. In other words, we will achieve process development and scaling up on a single platform. Many researchers have likely been looking forward to the birth of such a groundbreaking system. • 10 experiments in 15 minutes • Fraction & total flow • From 1 mL to continuous flow • Flow rate 0.1 to 30 mL/min • Reusable microfluidic chips • Possible transition of protocols from sunscreen

• Other Physics and Chemistry Equipment

Accelerating formulation optimization for vaccine and pharmaceutical development.

To create the optimal LNP, it takes a tremendous amount of time and effort to examine and pursue formulation conditions. LNPs are nanoparticles composed of multiple lipids. Therefore, it is necessary to find the optimal conditions such as the mixing ratios, the ratio of lipids to payload, and the flow rates during mixing. Furthermore, we must also consider throughput issues. Sunscreen can produce up to 96 types of small LNPs within six hours, thus solving the previous throughput problems. This means that it is possible to explore a greater number of formulation condition investigations in a single day. • Fully automated execution of up to 96 types of condition investigations within six hours • 200 μL to 2 mL per experiment • Flow rate of 0.1 to 30 mL/min • Reusable microfluidic chips • Seamless scale-up through process and protocol optimization

• Other Physics and Chemistry Equipment

Introducing the details of the newly launched LNP production and screening device.

Researchers of lipid nanoparticles (LNPs) spend a tremendous amount of time on screening, optimization, and scaling up experiments to achieve optimal performance, spot-on targeting, and controlled release of active pharmaceutical ingredients (APIs). Factors such as solubility, pH stability, payload release, and encapsulation all depend on particle size, shape, and structure. In other words, to obtain the right formulation, it is necessary to explore a vast number of formulation parameters and process parameters one by one, and even if a perfect formulation is found, scaling up usually means switching equipment and re-optimizing settings. In this webinar, we will introduce a platform, Sunny Suite, that can reduce the time spent on these LNP formulations. ■ Date and Time: February 26 (Monday) 14:00~ ■ Speaker: Yuji Senoo, Field Application Scientist, Unchained Labs, Inc. ■ Register here: https://unchainedlabs.zoom.us/webinar/register/3217065146675/WN_U1o3xQoZRAKHN-A-7b1yqg

• Other protein analysis

It enables the monitoring of potency and purity throughout the entire workflow of lentivirus research and development, accelerating gene therapy development.

"Leprechaun" is a system that analyzes whether lentivirus particles are of the correct size and structure, and can measure viral titer. It allows for the determination of the titer of lentivirus present in a sample without being misled by confusing noise (such as incomplete viruses or contamination). Not only can it measure information that was previously only obtainable separately through conventional methods like ELISA, qPCR, and transduction assays, but it also enables structural analysis that those methods could not provide, all on a single platform. Capabilities: ■ Lentivirus titer ■ Lentivirus structure ■ Exosome concentration ■ Analysis of contamination (impurities such as extracellular vesicles) Features: ■ No sample purification required ■ Physical structural analysis possible ■ Distinction between virus integrity and impurities ■ Up to 16 samples can be measured at once *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement and measuring equipment

You can measure 10 samples at once! There's no need to clean expensive chips that are prone to clogging!

"Honeybun" is a high-speed viscometer that can output data almost simultaneously with processing. Regardless of whether the number of samples is 1 or 10, it uses a few microliters of each sample through a microchannel and reads viscosities in the range of 0.5-150 cP within a few minutes. No pre-treatment or cleanup of samples is necessary. 【Features】 ■ Can measure up to 10 samples at once ■ Required sample volume: 35μL (can measure from 15μL; see application notes) ■ Measurement completed in under 1 minute (for viscosities below 10 cP) ■ Measurement range: 0.5-150 cP ■ No cleaning required and maintenance-free *For more details, please refer to the PDF document or feel free to contact us.

• Other bio-related products

Chuo Automobile Industry Co., Ltd. will be exhibiting at the "PV EXPO International Photovoltaic Power Generation Exhibition" held at Intex Osaka. A variety of products and technologies will be showcased, ranging from advanced solar cells to the construction, maintenance, and operation of solar power plants, with experts from around the world attending the exhibition. This event, where people and information gather "in real life" from all over the world, is an important platform to accelerate the solar power business through face-to-face interactions. We sincerely look forward to your visit.

Rineo Solutions will be exhibiting at EdgeTech+ 2025. At the venue, we will introduce the total solutions from the Cybertrust Group that can be widely used from the design to the operational phase of embedded Linux development. We invite you to visit the Cybertrust/Rineo Solutions booth during your visit. ■ Products Scheduled for Display SBOM and Vulnerability Management "Timesys Vigiles" Embedded Linux Ultra-Fast Boot Solution "LINEOWarp!!" "Embedded Linux Maintenance Service" Long-Term Usable IoT and Embedded Linux OS "EMLinux" SBOM-Compatible Vulnerability Management Tool "Miracle Vul Hammer" ■ Announcement of Presentations At this exhibition, there will be two presentations by members of Cybertrust/Rineo Solutions. We plan to introduce useful information for the development and operation of embedded Linux products, so please join us.

The JIMTOF2026 has started today, October 26! When you visit, please be sure to stop by our booth. (Booth number: East 1 E1014) ▼JIMTOF2026 Special Page https://www.somax.co.jp/notice02/ We sincerely look forward to your visit!

● Dates: November 12 (Thursday) to November 14 (Saturday), 2026 10:00 AM to 4:00 PM (Final day, the 14th, until 3:00 PM) ● Venue: Okaya City Comprehensive Gymnasium ● Exhibition Name: Suwa Area Industrial Messe 2026 ● Our Booth: East 156 ● Exhibition Content: We will showcase our main products in six categories, including "Linear Encoders," "Linear Displacement Sensors," "Sensors for Unmanned Transport Vehicles," "Magnetic Proximity Switches," "High-Precision Magnetic Sensors/Switches," and "Inclinometers/Inclinometer Detectors," as well as other magnetic application devices. ● Pre-registration for attendance: Free, but please register in advance. ● For other inquiries, please contact us using the options below: · Phone inquiries · Inquiry form Sales and technical staff will be on-site, so we welcome consultations on matters beyond the exhibited products. Feel free to stop by. We look forward to your visit.

We will be exhibiting at the "Powder Technology Exhibition 2026" held at Tokyo Big Sight. During the event, we will showcase various products. We invite all related parties to come and visit us. 【Suppliers】 ・Hielscher