Announcement of Participation in the 9th National Small Hydropower Generation Conference in Saitama

A rich selection of pipes, fittings, and irregular pipes allows for detailed responses to user needs!

WED pipes are dual-layer pipes made of high-density polyethylene, available in sizes that conform to ISO standards. Nominal diameter: W40 to W350 【Features】 ○ It applies the international standard ISO4427, which originated in Europe, where the penetration rate of polyethylene pipes is the highest in the world. This allows for the use of a wide variety of fittings. ○ Made from black high-density polyethylene with excellent weather resistance, making it suitable for exposed piping. ○ Pipes with a nominal diameter of W100 or less can be delivered in long lengths (tab-wound). ○ The delivery of long-length pipes can reduce labor and shorten construction time, leading to cost savings. ○ Polyethylene pipes are flexible and have excellent seismic resistance.

• Piping Materials

A rich selection of pipes, fittings, and irregular pipes allows for detailed responses to user needs!

The WE pipe is a single-layer pipe made of high-density polyethylene, available in sizes that conform to ISO standards. Nominal diameter: W150 to W1500 【Features】 ○ Good results were obtained in the JWWA K-14-2017 chlorine water resistance test. ○ It applies the international standard ISO4427, which originated in Europe, where the penetration rate of polyethylene pipes is the highest in the world. This allows for the use of a wide variety of fittings. ○ Made from black high-density polyethylene with excellent weather resistance, making it suitable for exposed piping. ○ The delivery of long pipes enables labor-saving construction and shortening of construction periods, leading to cost reductions. ○ Particularly in the field of large-diameter piping, our WE not only provides product supply but also has extensive experience in engineering and piping installation work. ○ Polyethylene pipes are flexible and have excellent seismic resistance. ● Public Interest Incorporated Foundation Japan Sewage Works New Technology Organization Construction Technology Examination Certificate Applicable pipe types: WE-13.6, WE-11, WEETAX-11 / Applicable nominal diameters: W150, W200, W250, W300

• Piping Materials

A composite pipe reinforced with fibers that can withstand use under harsh conditions!

WEETDA enhances internal pressure strength and suppresses creep by wrapping aramid fibers around a high-density polyethylene double-layer pipe, creating a composite structure. Operating Pressure Nominal Diameter (Conduit dimensions are based on ISO standards.) 〇WEETDA-13.6 1.0MPa W40～W100 〇WEETDAX-13.6 1.5MPa W40～W100 〇WEETDAY-11 2.0MPa Please contact us for details. 【Features】 ○ The use of long pipes reduces labor and shortens construction time, allowing for cost savings. ○ It has excellent flexibility and can be extended while bending. ○ The outer layer is coated with low-density polyethylene containing carbon black, providing excellent weather resistance and corrosion resistance. ○ By using fittings of the same material and applying EF fusion and automatic butt fusion, it creates a highly reliable pipeline with a monolithic structure.

• Piping Materials

A composite pipe reinforced with fibers that can withstand use under harsh conditions!

By wrapping aramid fibers around high-density polyethylene conduits and creating a composite structure, we enhance internal pressure strength and suppress creep. Operating Pressure Nominal Diameter (Conduit dimensions follow ISO standards) 〇WEETA-13.6　　1.0MPa　　 W150S～W600 〇WEETAX-13.6　 1.5MPa　　 W150S～W400 〇WEETAY-11　　 2.0MPa　　 Please inquire 【Features】 ○ The delivery of long pipes enables labor-saving construction and shortens construction periods, allowing for cost reduction. ○ Excellent flexibility allows for bending while extending the pipe. ○ The outermost layer is coated with low-density polyethylene containing carbon black, providing excellent weather resistance and corrosion resistance. ○ By using the same material for joints and employing EF fusion and automatic butt fusion, a reliable pipeline with an integrated structure is achieved. ● Certification from the Japan Fire Equipment Safety Center for fire extinguishing equipment 　Certification Number PL-022 　Applicable Pipe Types: WEETA-13.6 / Applicable Nominal Diameters: W75, W100, W150, W150S ◎ For nominal diameters below W100, please refer to the WEETDA page.

• Piping Materials

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.