"OCT-equipped heating observation imaging furnace" contributes to global research! Direct observation of internal structural changes at high temperatures.

Rapid heating at approximately 50°C/sec using focused light heating method, with the possibility of rapid cooling when the heating lamp is turned off. Compatible with various atmospheres.

The "IR Series" (IR Series) of focusing heating furnaces manufactured by Yokokura Seisakusho, used by various research institutions around the world, is an IR image furnace that utilizes near-infrared focusing heating. It features a clean environmental structure that allows for ultra-fast heating and cooling. The product lineup includes the "IR-HP (6 Parabolic Radiation)," which dramatically expands the temperature distribution area compared to conventional heating furnaces with rapid heating and cooling from six directions; the "IR-QP (4 Elliptical Shared Focusing)," which offers double the temperature distribution area and rapid heating compared to conventional heating furnaces with rapid heating and cooling from four directions; and the "IR-TP (2 Elliptical Shared)," which enables microscopic observation compared to conventional heating furnaces with rapid heating and cooling from two directions. 【Main Features】 - Clean, energy-efficient, high performance - Vacuum and gas replacement + observation - High-speed heating with low power (1500°C in 30 seconds with only 4kW) - Heater uses tungsten filament with a high heating temperature of 3400K - Watt density is 10 to 20 times higher than nichrome heaters - Real-time temperature control available - Compact size For more details, please contact us or refer to the catalog.

• Electric furnace

It is a compactly designed high-temperature heating observation device. It can be used on your microscope or micro-scope.

The IR-TPS is a high-temperature stage for microscopes that has been developed to achieve the contradictory goals of "high functionality and low cost." In addition to the standard configuration, advanced system equipment can be built with high-quality options. It can be used for research such as material analysis and quality control under precise temperature control in air, inert gas, or vacuum environments. 【Features】 ○ Uniform high-temperature heating of the sample at a speed of up to 1500°C within 60 seconds using infrared concentration ○ Energy-saving clean heating ○ Easy maintenance For more details, please contact us or refer to the catalog.

• Analytical Equipment and Devices

Minimize work inside the glove box ◎ Screening of solid electrolyte materials / Impedance evaluation by temperature characteristics ◎ Multiple uniform, short time, and accurate test evaluation

It excels in material screening of solid electrolytes and impedance evaluation according to temperature characteristics! ▼Features▼ 1. Reproduces various heating patterns of inorganic electrolyte heating and sintering processes in a short time. - Temperature can be adjusted with an accuracy of ±1°C within a temperature range of 50°C to 1200°C. - The heating rate is also a maximum of 300°C/min, allowing for various heating patterns to be tested in a short time even from room temperature. 2. Efficient simultaneous evaluation of impedance measurements for lithium-ion conductivity (conductivity). - Structure allows for heating with electrodes attached to the top and bottom of the coin cell. - The coin cell holder is prepared for 4 slots. - Uniform heating/measuring of 4 samples simultaneously under the same conditions. - Various coin cell diameters available from Φ20 to Φ8mm. 3. Simple operation and design that prevents exposure to the atmosphere / atmosphere control. - Work inside the glove box involves only setting the samples. - Inside the quartz tube, a quartz coin cell holder is maintained, and only the coin cell is accurately heated. - The completely sealed transparent quartz tube is heated from the outside using light heating. - Gas introduction systems and atmosphere control during heating are also easy to manage. Please contact us for more details.

• Secondary Cells/Batteries
• Lithium-ion battery
• Electric furnace

"YONEKURA: Supporting Curiosity and Creativity" - Yonekura Manufacturing Co., Ltd. responds to all challenges with a "comprehensive production system" from development to manufacturing and support.

**Main Products and Services** 〇 IR Imaging Furnace 　→ Real-time observation of behavior at high temperatures 　　・ High-temperature tensile observation device CATY-T3H 　　・ Compact high-temperature observation device TPS 　　・ Ultra-high-temperature observation device 18SP 〇 Material Testing Machines 　→ Apply loads to materials and products for measurement and analyze the results 　　・ Instrumented Charpy testing machine 　　・ Thrust friction and wear testing machine 〇 Custom Testing Machines 　→ Manufacture original devices that meet unique specifications 〇 System and Software Development 　→ Contribute to human error prevention and work efficiency improvement 〇 Minimal Fab 　→ Participate in a semiconductor manufacturing model for small-lot production in a cleanroom-less environment For more details, please contact us. We are happy to consult from a researcher's perspective.

• Testing Equipment and Devices
• Impact Test

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall