Notice of Participation in the 15th High-Performance Materials Week Tokyo Exhibition (Makuhari Messe)

Utilizing the T-die extrusion technology we have developed over many years, we accept everything from development to contract production, even for small lots! Please feel free to consult us about any special resins or soft materials!

Do you have any experience with wanting to form fine shapes on the film surface, wanting to create a special compound resin into a film, having resin pellets but no film grade available, being turned down due to small lot sizes, being able to prototype but not mass-produce, being unable to film due to soft materials or tacky materials, or being unable to laminate in a clean room? If you have any issues with T-die extrusion, please consult us first. From prototyping with a small test machine to production with mass production machines, we will do our utmost to meet your needs! <General Environment> - Small extrusion test equipment with an effective width of approximately 210mm (single-layer to multi-layer, up to 3 types and 5 layers) - Mass production machines for extrusion lamination processing with effective widths from 620mm to a maximum of 2,150mm (multiple units) *Additional equipment: Co-extrusion, sand feed device, double-sided tandem, corona treatment, after corona, frame treatment, detectors, etc. <Clean Room> - Medium mass production machine with an effective width of approximately 650mm (single-layer) - Large mass production machine with an effective width of approximately 1,300mm (multi-layer) - Mass production machines for extrusion lamination processing with effective widths from 800mm to 1,400mm (AC treatment, sand feed device, single-sided tandem)

• Processing Contract
• plastic
• Paper and pulp products

We have developed a film that modifies polylactic acid using our unique technology, imparting flexibility and heat resistance while maintaining a high biomass content (95%) and biodegradability!

We have developed a transparent and highly flexible film that contributes to reducing environmental impact through high biomass content and biodegradability. This film is modified polylactic acid (PLA) using our unique technology, maintaining transparency while achieving both flexibility and heat resistance. Additionally, its softness and excellent moldability help suppress whitening during folding processes. 【Features】 ■ Provides flexibility to normally rigid polylactic acid (PLA) ■ Contributes to reducing environmental impact with over 95% high biomass content and biodegradability ■ Can be utilized for packaging that takes advantage of visibility ■ Improves heat resistance from around 60°C to over 100°C *For more details, please download the PDF or contact us directly.

• plastic
• Packaging Bags
• Packaging materials

A film that releases highly volatile natural and artificial fragrances! It imparts the aromatic effects and insect-repelling properties of natural fragrances to the film!

At Goyou Paper Co., we have developed a technology to release natural and artificial fragrances into the air. This technology can be applied to various products. By incorporating volatile agents that provide insect-repellent effects, antibacterial and antifungal properties, and the ability to deter certain household pests, it is also possible to achieve a fragrance plus additional benefits. 【Features of Fragrance Film】 - By placing a scented film, you can easily create a living space that suits your preferences. - Fragrances have various effects, including relaxation, appetite control, and enhanced concentration. - Additionally, one of the side effects of fragrances is pest-repellent properties. - It is also possible to pelletize highly volatile agents similar to fragrances for film formation. Please utilize fragrance films and laminated products for the development of new products and more. *For more details, please download the PDF or contact us directly.

• Paper and pulp products
• Organic Natural Materials
• Office supplies and stationery

Industry-leading functional anti-fouling film! Used in marine environments, it prevents contamination from marine organisms simply by being applied.

An anti-fouling film for marine organisms is a special film that has properties that make it difficult for marine organisms such as barnacles, crustaceans, mollusks, and algae (fouling organisms) to adhere in the ocean. By applying it to areas where marine fouling organisms are problematic, such as measuring instruments used in the ocean, marine sports equipment, fishing gear, boat bottoms, seawater intake areas, and structures where anti-fouling paint is difficult to apply, it becomes harder for fouling organisms to attach, and any minor adhesion can be easily wiped off, making maintenance easier. Additionally, since it has an adhesive film structure, you can choose between a strong adhesive type suitable for long-term use where peeling would be problematic, or a re-peelable type that can be applied and removed as needed, depending on the application.

• plastic
• Other measurement, recording and measuring instruments
• Water quality testing

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.