In-chamber imaging during constant temperature and humidity testing.

At the same time, we also support monitoring of power supply, temperature, and electrical items, as well as checks after extraction!

Our company conducts environmental testing using a constant temperature and humidity chamber with a front glass window and a camera, while capturing and monitoring the operational status such as screen displays. During environmental testing using equipment like constant temperature and humidity chambers, monitoring the condition of the test subject using loggers for parameters like voltage, current, resistance, and temperature is widely practiced. For samples where monitoring with loggers is difficult, we combine a constant temperature and humidity chamber equipped with a front glass window option, a camera, and monitoring software to conduct environmental tests while capturing and monitoring the condition of the testing equipment. [Example of monitoring an LCD panel] - Interval shooting at regular intervals - Motion detection shooting that captures changes in condition - Monitoring of indicator lamps is also possible *For more details, please download the PDF or feel free to contact us.

• Environmental Test Equipment

In-Situ Continuous Measurement Reliability Evaluation Testing Service

In-situ continuous measurement reliability evaluation tests involve applying stress while measuring characteristics to conduct reliability assessments. ● Accurate understanding of failure time is possible In a read-out method where samples are taken from a stress environment at a fixed time, failure can only be understood at the timing of the read-out, making it impossible to know the exact failure occurrence time. In-situ measurement allows for an accurate understanding of failure time. ● Detection of recoverable failures is possible Recoverable failures can cause significant issues in the market. In most cases, the read-out method makes it nearly impossible to detect these recoverable failures, whereas in-situ measurement enables the detection of recoverable failures, allowing for accurate judgment and assessment. ● Monitoring of stress application conditions on samples is possible The stress application status and measurement data can be confirmed in real-time.

• Testing Equipment and Devices
• Other inspection equipment and devices
• Contract Inspection

We will thoroughly evaluate and verify the LED from all angles.

■Comprehensive Capability Consistent evaluation resistance from reliability testing to electrical characteristic measurement, optical characteristic measurement, and further analysis. ■Rich Analytical Methods - Forward bias analysis / Reverse bias analysis - Detection from visible to infrared - Emission analysis / OBIRCH analysis ■Special Technology By filtering the visible light range, we can detect weak emissions from abnormal areas without missing them.

• Bullet-shaped LED
• Chip type LED
• LED Module

We conduct reliability evaluation tests for various electronics products, components, and materials in accordance with standard specifications such as JIS, JEDEC, and MIL.

■High Accelerated Life Test: 5 units ■Thermal Shock Test: 24 units ■Constant Temperature and Humidity Test: 22 units ■Liquid Tank Thermal Shock Test: 3 units ■High Temperature Storage Test ■Hot Oil Resistance Evaluation Test ■Insulation Resistance Continuous Monitoring Evaluation ■Continuity Resistance Continuous Monitoring Evaluation ■Electromigration Continuous Monitoring Evaluation ■Microfocus X-ray Transmission Observation ■Ultrasonic Microscope Observation ■ESD Evaluation Test ■CDM Evaluation Test ■Universal Tensile Evaluation Test ■Cross-section (Polishing) Observation Service (Evaluation before and after environmental testing is also possible) ■Solar Cell (Crystalline Silicon/Amorphous Silicon/Compound/Organic Thin Film, etc.) EL Emission Phenomenon ■Heat Generation Observation

• Testing Equipment and Devices
• Other inspection equipment and devices
• Contract Inspection

We provide comprehensive support for customers facing reliability issues with overseas manufactured LCD displays, from reliability testing to failure analysis and material analysis.

Unreliable LCD displays are causing problems in the market. At Aites, we solve our customers' reliability issues through our extensive experience and state-of-the-art equipment, conducting reliability test design and visual inspections before and after testing. Furthermore, we provide support from failure mode classification to failure analysis and material analysis.

• Testing Equipment and Devices
• Contract Analysis
• Contract Inspection

We conduct environmental testing, as well as non-destructive observation and electrical property measurements.

At AITES, we use environmental testing equipment that conforms to standard specifications such as JIS, JEDEC, and MIL, and we accept commissioned testing for reliability evaluation of various electronics products, components, and materials. We offer a range of tests including electrical testing, non-destructive observation, and power cycle testing. 【Environmental Testing】 ■ Highly Accelerated Life Testing ■ Constant Temperature and Humidity Testing ■ Thermal Shock Testing ■ Liquid Bath Thermal Shock Testing ■ Temperature and Humidity Cycle Testing ■ In-Situ Continuous Measurement Reliability Evaluation Testing Service *For more details, please refer to the PDF materials or feel free to contact us.

• Analytical Equipment and Devices
• Analysis Services

Two high-power constant temperature and humidity chambers have been introduced! Ideal for temperature cycle tests and temperature and humidity cycle tests for automotive parts and more.

At AITES Co., Ltd., we offer "environmental testing in a high-power constant temperature and humidity chamber." We can achieve a constant temperature change of up to 15°C/min (-45 to ±155°C). Temperature cycle tests can be conducted by controlling the temperature gradient. Additionally, the temperature control range is wider than that of typical constant temperature and humidity chambers, allowing control at 95°C. 【Features】 ■ Two high-power constant temperature and humidity chambers introduced ■ Constant temperature change of up to 15°C/min (-45 to ±155°C) possible ■ Temperature cycle tests can be conducted by controlling the temperature gradient ■ Wider temperature control range than typical constant temperature and humidity chambers ■ Controllable at 95°C *For more details, please refer to the PDF materials or feel free to contact us.

• Contract Analysis
• Contract measurement
• Contract Inspection

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.