[Free Webinar: Held on April 15 (Tuesday)] "Reiwa Edition Logistics Technology Handbook" Publication Commemorative Webinar - An explanation of the essential handbook for practitioners covering the latest material handling trends and various data on technical standards.

Visualizing the forklift's movement and operational status!

"Rojitan Fork" is a service that uses IoT tools to visualize the operational status of forklifts within warehouses and factories, calculating the truly necessary number of forklifts. 【Benefits of Introducing Rojitan Fork】 ★ Real Data Obtain real data through IoT devices, not based on intuition or experience! ★ Consultant Recommendations Consultants analyze the data and suggest points for efficiency and the appropriate number of forklifts! ★ Low Cost All equipment is available for rent at a low cost!

• Contract measurement

Introduction of case studies for the implementation of IoT tools for forklift traffic flow acquisition! A table of implementation results is also included.

This document introduces a case study that addresses the reduction of forklift numbers using a system called "Rojitan Fork," which utilizes beacons and sensors. It provides detailed explanations of the reasons for implementation, the use of two types of beacons and load sensors, and the duration of the implementation. Additionally, it includes a table of implementation results, clearly presenting information such as the implementation sites, number of units, challenges and effects, and the number of units reduced. [Contents] ■ Is one forklift per person really necessary? ■ The mechanism of Rojitan Fork ■ Implementation of Rojitan Fork ■ Ten forklifts with an operating rate of less than 10% ■ Visualization of forklift movement paths ■ KPIs presented by Rojitan Fork *For more details, please download the PDF or feel free to contact us.

• Process Control System

[April 15 (Tuesday) 14:00~14:50 Free Online Seminar] Do we really need the current number of forklifts?

Forklifts are used in factories and logistics warehouses for handling and transporting large cargo and pallets that cannot be managed manually. However, when site managers look over the area, they may notice that some forklifts are not in operation. When seeing such a situation, many people might wonder, "Is the current number really necessary?" or "Wouldn't it be okay to reduce the number a bit?" Generally, with standard forklifts, one can only check the operating hours using the hour meter, and it is not possible to grasp the operational status by time slots, the locations traveled, or the ratio of empty runs to loaded runs. In this free online seminar, we will introduce a case study that uses a system called "Rojitan Fork" utilizing Visual Slam to understand the movement lines and utilization rates of forklifts and work on reducing the number of units. [Free Online Seminar Overview] ■ Date and Time: April 15 (Tuesday) 14:00 - 14:50 *Live questions will be accepted ■ Cost: Free *For more details, please check the seminar details from the link below or feel free to contact us.

• others

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, we received the following feedback as the most common requests: - I want to see the actual generators that have been installed. - I want to see the operation under actual load. - I want to hear the opinions of companies that have installed the generators. - I want to see the operating generators before making a purchase. After all, it’s understandable to be concerned about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing..." we will be holding this tour. It is located in that area of the Kanto region where the maximum temperature exceeds 40°C during the summer. We successfully operated it again this summer, so we are confident about handling the heat (sweat)... Furthermore, it has been confirmed that it is "fuel-efficient" due to the world-leading "Scania engine" installed. This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting point and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.