【Exhibition Information】Coating Japan - High-Performance Materials Week - Paint and Coating Equipment Exhibition

At Seiei Manufacturing, we are proposing low-carbon painting drying ovens to respond to a decarbonized society.

At Shoei Manufacturing, which has extensive experience with painting drying ovens and exhaust gas treatment systems, we offer a lineup of "hydrogen combustion type" and "electric heater type." By using "renewable energy sources" and "hydrogen fuel," we can achieve decarbonization. Even if these options are not currently available, we can adapt to the uncertain future of energy supply by introducing: - A hybrid type that electrifies part of the heat source configuration - Hydrogen gas burners that can also use city gas/propane gas. 【Painting Baking Drying Oven】 Hot Air Zone (100–250°C) ⚪︎ Hydrogen combustion hot air generator "AH-H2" ⚪︎ Electric hot air generator "AH-E" Radiant Baking Heating Zone (700–850°C) ⚪︎ Electric infrared heater ⚪︎ Hydrogen combustion burner Water Removal Drying Oven (100–150°C) / Booth Heating ⚪︎ Hydrogen combustion hot air generator "AH-H2" ⚪︎ Electric hot air generator "AH-E" 【Exhaust Gas Treatment System / VOC Treatment】 ⚪︎ Electric catalytic deodorization device (CT) ⚪︎ Electric regenerative thermal oxidizer (RTO) Our Thermal Technology Research Institute is equipped with a painting drying test oven (QCO) with a painting booth.

• Painting Machine
• Drying Equipment
• Heating device

An exhaust gas treatment device that achieves high energy efficiency and high decomposition rate! It features a compact design that saves space.

The direct combustion deodorization device "CH Series" is a system that completely oxidizes and decomposes odors and VOCs by passing them through at high temperatures of 700°C to 800°C for a certain period of time. It comes standard with a heat exchanger that preheats the odors and recovers about 50% of waste heat, contributing to energy savings. We offer various deodorization devices that effectively handle a wide range of odors, such as those from painting drying ovens, printing drying, and food processing. 【Features】 ■ High energy-saving effect ■ High deodorization efficiency ■ Excellent safety ■ Excellent durability ■ Compact design ■ Easy operation *For more details, please refer to the PDF materials or feel free to contact us.

• Other painting machines
• Heating device
• Industrial Furnace

This is a large-capacity deodorization device that boasts a high heat recovery rate due to its heat storage type. It processes odor gases (VOCs) in exhaust gas with high decomposition efficiency.

Due to its high heat recovery efficiency achieved through thermal storage, it efficiently performs large-capacity deodorization treatment. 【Features】 1. High energy-saving efficiency By recovering and reusing the thermal energy generated during the thermal oxidation decomposition of VOCs and others with ceramic heat storage materials, high energy-saving efficiency is realized. 2. Selection of suitable methods We offer a lineup of rotary, two-tower, and three-tower systems, proposing the most suitable method based on the customer's usage conditions. 3. Wide range of processing airflow It can accommodate a wide range of odor gas airflow (60 to 1700 Nm³/min). 4. Excellent deodorization efficiency and heat recovery rate The standard deodorization efficiency is high at 95-99%, and the heat recovery efficiency is 95-97%, resulting in excellent running costs. 5. Long lifespan of heat storage materials to reduce maintenance costs The heat storage materials use durable ceramics, allowing for a long equipment lifespan and the possibility of keeping maintenance costs low. 6. Equipped with a suitable original dedicated burner The heat source is equipped with a gas burner specifically designed for RTO, featuring a space-saving design with excellent maintainability. 7. Abundant delivery track record and reliability Since the start of sales, we have a rich delivery record both domestically and internationally over approximately 20 years.

• Gas recovery/treatment equipment
• Incinerators and incinerators
• Deodorizing Equipment

It is a device that uses a catalyst to oxidize and decompose VOCs with high efficiency. Since it can process at low temperatures, it can reduce the amount of gas used, and an electric heater type is also available as an option.

The catalytic combustion deodorization device "CT Series" is an environmental device that uses a catalyst to oxidize and decompose odors and VOCs at around 350°C, rendering them harmless for discharge. It comes standard with a heat exchanger that preheats the odors and recovers about 50% of waste heat, contributing to energy savings. We provide various deodorization devices that effectively handle a wide range of odors, such as those from painting drying ovens, printing drying, and food processing. 【Features】 ■ High energy-saving effect ■ High deodorization efficiency ■ Excellent safety ■ Excellent durability ■ Compact ■ Easy operation ■ Heat sources can be either electric or gas

• Other painting machines
• Electric furnace
• Industrial Furnace

Optimal heat source! Testable with four heat sources. We propose suitable heating equipment for work using gas/electric/hybrid heat sources! Thorough testing can be conducted together with our customers.

QCO Test Equipment ■ You can test the painting and drying processes in an environment close to an actual production site. Temperature measurements of the workpiece can be conducted, allowing for the derivation of optimal heating patterns by changing the heat source. The equipment can accommodate large and long workpieces, so please feel free to consult us about your requirements. ■ Gas hot air & jet heating zone With a jet stream of 350°C and 50m/sec, it can handle not only painting and drying but also other heating applications. Hydrogen combustion is also possible, allowing for the evaluation of its impact on products. Load capacity: 800W x 800D x 1400H (maximum) 50kg/hanger (maximum) Conveyance method: Trolley conveyor (hanger pitch 300mm) Conveyance speed: 1 to 10 m/min Painting booth: No-pump type Drying furnace: Gas infrared burner (bottom 23kW x 2, sides 35kW x 2, Max. 800°C) Gas far-infrared panel (116kW x 1 Max. 350°C) Gas hot air & jet heating (233kW x 1, Max. 350°C, 50m/sec) *1 Electric infrared heater (bottom 11kW x 2, sides 17.5kW x 2, Max. 800°C) *1 Please consult us regarding hydrogen combustion.

• Drying Equipment
• Heating device
• Industrial Furnace

It is a movable unit that can be transported to the customer's factory, allowing for tests using actual odors. Deodorization tests for various odors, including VOCs, are possible!

Direct combustion deodorization device (on-site demonstration available) As it is a mobile demo unit, testing can be conducted using actual odors at the customer's factory. It can accommodate various fields such as painting sites and food processing. ~Device Overview~ Processable components: VOCs (volatile organic compounds) and various other odors. Processing capacity: Max. 1.0㎥N/min Processing temperature: 760℃ (Max. 800℃) Inlet gas temperature: Ambient temperature to 250℃ Inlet gas pressure: More than -500Pa Inlet gas concentration: Below 1/4 of the lower explosion limit ~Utilities and items to be prepared by the customer~ Power supply: AC200V, φ3, 50/60Hz, 10A Fuel used: City gas (13A) supplied at 2.0kPa Max. 2.8㎥N/h LPG (propane) supplied at 2.8kPa Max. 2.5kg/h External dimensions: 1875L × 1050W × 975Hmm (excluding attached duct) Weight: 600kg Outdoor use: Yes Transport: Will be loaded and transported by a one-box vehicle. Please feel free to contact us for more details.

• Heating device
• Industrial Furnace
• Environmental Test Equipment

We propose a suitable "hot air generator" for your drying equipment. [It can be used for painting drying, food drying, heating furnaces, and various industrial furnaces.]

The hot air generation device can be used as a heat source for drying ovens, heating furnaces, and various industrial furnaces, as well as in drying processes for painting equipment and food processing, making it suitable for a wide range of applications. 【Feature 1】 We offer a variety of heat sources and heating methods. ○ Gas type (compatible with city gas, propane gas, and hydrogen gas combustion) ○ Electric type (capable of achieving outlet temperatures equivalent to gas combustion type with clean hot air) ○ Indirect type (clean hot air using a heat exchanger) 【Feature 2】 We have a rich selection of combustion volumes and heater capacities. ○ Gas type: 47kW to 2300kW ○ Electric type: up to 470kW 【Feature 3】 (Model in parentheses) Flexible selection tailored to drying equipment is possible. ○ You can choose "clean hot air" that does not contain combustion exhaust gases, whether gas or electric type. (AH-BX, AH-E) ○ It can also accommodate high furnace pressure. (AH-B) ○ High-temperature hot air up to 800℃ (AH-B) ○ Hot air return is possible (AH-B, AH-D, AH-E) ○ Design can be customized according to the installation location. (All AH models) ○ Various safety devices are standardly equipped. For more details, please download the catalog or contact us.

• Heating device
• Electric furnace
• Industrial Furnace

The hydrogen-only specification of the SDC duct burner, which is a heat air generation device for paint drying ovens, has made its debut.

The "hydrogen-only specification" of the pre-mixed duct burner series, which has a proven track record as a heat source for hot air generators, has made its debut. It is a decarbonized gas burner that achieves both stable combustion and low NOx performance. 【Features】 1. Hydrogen combustion gas burner that emits no CO2 during combustion. 2. Unique casing structure that balances durability and combustion performance, with a turn-down ratio of over 20:1. 3. A lineup of combustion capacities up to "465 kW." 4. Clears emission regulation values through low NOx combustion technology (tested with our equipment). 5. The ignition pilot burner is also equipped with a hydrogen-only specification. 6. Can be replaced with existing burners. As a heat source for hot air generators, it can be used in painting drying ovens, food drying ovens, various drying furnaces, drying equipment, and heating furnaces. Hydrogen combustion demonstrations are currently being conducted at the Thermal Technology Research Institute. We invite you to visit.

• Drying Equipment
• Heating device
• Industrial Furnace

Introducing the forefront of development! Hydrogen combustion without carbon dioxide emissions! SHOEI is advancing the hydrogen compatibility of its proven in-house burners.

【New Development! Hydrogen Gas Burner Lineup】 ◇ High-Temperature Furnace Hydrogen Gas Burner (EIS-H2) Achieves a wide combustion range and stable combustion Suitable for heat treatment furnaces, melting furnaces, heating furnaces, deodorization devices, etc. ◇ Package Burner (BJ-H2) ◇ Fan-Equipped Package Burner (SP-H2) Provides stable flames even under high furnace pressure conditions, with good operability and maintainability; suitable for low-temperature fields such as drying furnaces, as well as various industrial furnaces like heat treatment furnaces and deodorization devices. ◇ Hydrogen Combustion Recuperative Burner (STBW-H2) Equipped with a waste heat recovery device (heat exchanger), capable of reducing fuel usage by approximately 30% in addition to decarbonization. Developed in collaboration with Tokyo Gas Co., Ltd. and Tokyo Gas Engineering Solutions Co., Ltd.! Suitable for aluminum melting holding furnaces, preheating, heat treatment furnaces, etc. ◇ Hydrogen Combustion Single-End Radiant Tube Burner (TRFH-H2) Indirect heating method utilizing radiant heat With an integrated heat exchanger, the burner efficiency is 75%, achieving high efficiency. ◇ Hydrogen Combustion Duct Burner (SDC-H2) Converts duct burners mounted on hot air generation devices to hydrogen combustion Suitable for various drying furnaces such as painting drying and food drying.

• Drying Equipment
• Heating device
• Industrial Furnace

A continuous rust prevention treatment drying furnace suitable for processing large quantities of small items such as bolts, nuts, and drill screws!

This is a drying furnace that scatters workpieces after dip-spin coating on a mesh belt conveyor, sends them into the furnace, and performs processing. It is also possible to design a furnace with zones such as preheating, curing, and cooling zones. Additionally, by using a direct combustion deodorization device, it is possible to deodorize odors such as VOCs generated during processing. Furthermore, we can also propose a heat recovery system that exchanges high-temperature exhaust after deodorization and reuses it in the curing furnace!

• Electric furnace
• Industrial Furnace
• Heat Treatment Drying Equipment

Drying furnace after carburizing the motor rotor with varnish.

This is a batch furnace for electric heater drying after carbonizing the motor rotor in varnish. It uses an inner fan for hot air circulation and has a compact design.

• Drying Equipment
• Industrial Furnace
• Other drying equipment

It is a drying oven for painting tests equipped with an input and output mechanism.

This is an electric drying oven equipped with an automatic lift door powered by an air cylinder and an input/output mechanism for conducting painting evaluation tests. The processing airspeed can be varied through inverter control of the circulation fan. Regarding the hot air discharge temperature, a thyristor control method for the electric heater is adopted, allowing for a wide range of temperature settings.

• Other painting machines
• Drying Equipment
• Industrial Furnace

Introducing the latest lineup of hydrogen gas burners and low-carbon equipment!

**Exhibition Information** We will be exhibiting at Thermotech 2026, the 9th International Industrial Furnace and Related Equipment Exhibition. This is a special international exhibition boasting the largest scale in Asia, gathering various thermal technologies and related equipment. Date: September 9 (Wednesday) - 11 (Friday), 2026 Venue: Tokyo Big Sight, South Hall == Exhibition Content == **[Hydrogen Gas Burner Lineup]** We are advancing the hydrogen compatibility of our proven in-house burners (dedicated combustion and mixed combustion). We offer a rich lineup to be used in various temperature ranges and types of thermal equipment. We are also working on ammonia and next-generation fuels! **[Electrification of Thermal Equipment and Hybrid Heating]** We are responding to high-efficiency electrification based on proven thermal equipment (combustion furnaces). In addition to fully electrifying thermal equipment, we also have many achievements in hybrid heating that combines the advantages of combustion systems. Customers can choose the thermal source that suits their needs. **[Test Equipment Available]** At the Thermal Technology Research Institute, we have various test furnaces available, including hydrogen combustion tests! Additionally, we will introduce our energy-saving achievements and responses to fuel conversion. We will also broadly showcase combustion systems related to product quality improvement, automation, and labor-saving.

• Drying Equipment
• Heating device
• Industrial Furnace

The existing furnace remains as it is, contributing to the reduction of fuel gas consumption and low carbonization!

By installing a heat exchanger in the existing paint drying oven and recovering the exhaust heat from the oven, the combustion air for the burner is preheated. The temperature difference from the preheating of the combustion air contributes to energy savings.

• Drying Equipment
• Industrial Furnace
• Energy efficient utilization system

Connectors exist in very large numbers in the world. It is very difficult for customers to find connectors that match their specific applications from among them. The "Product Finder" on the ODU website serves as a tool to help find the right connector products. You can search for the optimal connector from various approaches, such as matching it to your cable, electrical specifications, waterproofing, etc. The connectors you search for will provide information on electrical specifications, durability, and also CAD data. In the online seminar, we will introduce how easy and quick it is to search for connectors using the "Product Finder" in a live format. ------------ Date and Time: November 19, 2026 (Thursday) 14:00 - 14:35 Venue: Online (A URL for the venue will be sent via email after you register) Speakers: Miho Kato, Sales Department, Kamex ONE Co., Ltd. Masaru Kimura, Sales Manager, ODU Japan Co., Ltd. ------------

KAI Group will be exhibiting at the "Advanced Materials Technology Exhibition 2026" held at Tokyo Big Sight. This exhibition widely introduces advanced materials and technologies in the industrial sector, covering everything from materials to their processing. It provides an essential venue for business discussions that are crucial for the development of new technologies and products in advanced fields. We plan to showcase industrial blades, cutters, and scissors with exceptional sharpness, leveraging the technology we have cultivated through our razor products. We sincerely look forward to your visit.

We will be exhibiting products that have undergone surface treatment through thermal spraying. Specifically, we will showcase products that have been ceramic thermally sprayed on metal rolls and aluminum alloy products that have undergone hard surface treatment. We provide a comprehensive service for thermal spraying repairs of parts that have lost thickness due to wear, surface modification of metal components, and other related machining processes. Exhibition Dates: November 11 (Wednesday) to 13 (Friday), 2026 - 3 days Opening Hours: 10:00 AM to 5:00 PM Venue: Tokyo Big Sight, East Hall 2

Kinoshita Corporation will exhibit at "N-Plus 2026," held at Tokyo Big Sight from November 11 (Wednesday) to 13 (Friday), as a member of the Japan Nonwoven Fabric Association's joint pavilion. In this exhibition, we will introduce a wide range of products, including the water-soluble and biodegradable nonwoven fabric "Haibios," themed "Returning to Paper," as well as the pulp nonwoven fabric "Kinari-to," which can be thermoformed. Additionally, we will have a mini sound absorption experience corner where you can actually test the differences in sound using our pulp-based sound-absorbing material "Otocell." We will showcase the various possibilities of our airlaid nonwoven fabrics through actual product displays and demonstrations. Please come and see our products and samples at the venue.

We will be exhibiting at the 46th Nano Testing Symposium (NANOTS2026) held at the Senri Life Science Center in Toyonaka City, Osaka Prefecture! Booth: Senri Room (6F) No. 28 We will be introducing our latest analytical technology services, so please stop by! We sincerely look forward to your visit.