What is the difference between fluorine grease and silicone grease?

High heat resistance, high pressure resistance, and excellent chemical resistance universal fluorine grease.

M-MLPT is a multipurpose fluorine grease specifically designed for molds, combining high heat resistance, high chemical resistance, and non-contaminating properties. Its high-performance design, incorporating PTFE (fluoropolymer), excels in sliding performance and lubrication longevity, making it suitable for a wide range of areas such as sliding parts, pins, cores, and slides in resin molding and die-casting molds. It prevents seizing and wear even in high-temperature environments above 200°C, and the risk of resin contamination is extremely low, making it ideal for molds of products where appearance quality is emphasized. ✅ Product Features (M-MLPT) - High heat resistance: Maintains stable lubrication performance even in high-temperature environments of 280°C - High lubricity: Extremely high sliding properties due to the incorporation of PTFE (fluoropolymer) - Non-contaminating: Minimal grease bleeding and discoloration, does not dirty molded products - Chemical resistance: Excellent resistance to solvents, gases, and resin additives - Versatile application: Ideal for sliding parts, slide sections, pins, guides, hinges, etc. - Prevents seizing and wear: Forms a lubricating film even under high loads, extending lifespan - Compatible with various mold materials: Usable with SUS, SKD, aluminum, hard chrome, etc. Widely adopted as a standard grease on-site: Numerous examples of transitioning from initial testing to long-term use.

• Plastic Mould
• Lubricants
• Mold

Differentiation through adhesion - High-performance grease specifically for O-rings and packings.

MK-OPA is a specialized grease designed to enhance the lubrication and sealing properties of O-rings and gaskets. It has excellent compatibility with rubber materials and maintains adhesion for extended periods. It is also compatible with resins and elastomers, making it suitable for a wide range of sealing materials. It is easy to extrude and can be applied using either a grease gun or by hand. In molding environments and maintenance applications, it contributes to extending the lifespan of components and reducing troubles.

• Plastic Mould
• Press Dies
• Lubricants

A strong ally in equipment management. A single tool that works for any material or application.

Lubrication, heat resistance, water resistance, rust prevention. All the performance required on-site, in one product. M-MPT is a multipurpose grease that combines special synthetic oil with ultra-fine particle PTFE. Its versatility allows it to accommodate all types of equipment, regardless of the usage environment, materials, or applications. It is NSF-H1 certified and can be used in food processing machinery. Additionally, it has low separation and degradation, which helps reduce the frequency of replacement and replenishment, contributing to overall cost reduction. This high-performance grease meets all needs for equipment maintenance, process improvement, and safety management.

• Plastic bearings
• Lubricants
• Lubricants and additives

Next-generation PTFE-based lubricants that challenge high temperature, high vacuum, and corrosive environments.

M-PPT is a PTFE-based fluorine grease designed to withstand harsh conditions such as high temperature, high vacuum, and high corrosion. It has high resistance to acids, alkalis, and organic solvents, providing stable lubrication for extended periods even in severe chemical environments and clean rooms. It can operate at temperatures ranging from -40°C to +250°C (withstanding up to 280°C momentarily) and is highly resistant to evaporation loss and oxidative degradation, making it ideal for equipment and devices that require high reliability. Additionally, it has good compatibility with metals, resins, and rubber, and is used for lubrication and wear resistance in high-temperature engineering plastic components such as PEEK, PPS, and PTFE, as well as for sealing and lubrication of O-rings and gaskets. This grease serves as the "last line of defense" to thoroughly mitigate lubrication issues, from fine mechanisms to heavy machinery components.

• Plastic bearings
• Engineering Plastics
• Lubricants

Reliable in processing environments. PTFE high-temperature lubricant that works even under long hours and high temperatures.

MK-HPT is a high-temperature fluorine grease based on a fully synthetic oil, blended with PTFE micro-powder. It can handle a wide temperature range from -40°C to +240°C, and due to its stable structure, it experiences minimal evaporation or hardening even in high-temperature environments. With the addition of antioxidants and anti-friction agents, it maintains durability and lubrication performance over an extended period. It is ideal for lubricating mold components and precision machinery.

• Engineering Plastics
• bearing
• Lubricants and additives

In summer construction sites, the surface temperature of the ground plates and the heat reflection can affect the working environment. In particular, steel plates tend to retain heat when exposed to sunlight, making it a challenge to implement heatstroke prevention measures and improve the site environment for workers. Hyper CLT ground plates are civil engineering materials that utilize wood CLT. As wooden ground plates, they can be used for temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways, serving as a versatile alternative to steel plates in various civil engineering sites. In actual sites, there are cases where the surface temperature can differ by about 20 degrees compared to steel plates, making them an easy-to-suggest material for reducing heat reflection and preventing heatstroke in summer. The 5×10 plate weighs approximately 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which also helps reduce construction burdens. Additionally, they feature noise reduction, environmental consideration, and CO2 fixation, which are unique to wood. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," these ground plates are also easy to utilize for innovative ideas and safety measures in public works. Companies looking to improve summer site environments are encouraged to consider Hyper CLT ground plates.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many opportunities to use temporary roadways, access roads, heavy machinery work yards, and material storage areas with sheets. Until now, steel plates have been widely used, but there is a growing interest in temporary materials made from wood due to environmental considerations and CO2 reduction. Hyper CLT sheets are civil engineering CLT materials made from wood CLT. As wooden sheets, they can be used for mud prevention, ground protection, ensuring work pathways, and as a substitute for steel plates. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and reducing the burden of transportation, installation, and removal. Wood has the property of fixing CO2, and further improvements in transportation efficiency can be expected due to its lightweight nature. These materials also help improve the site environment by reducing glare and noise. In public works, they are easy to use as materials for environmental considerations, safety measures, and creative proposals, making them recommended for companies aiming to enhance site evaluations. Please consider them as a new sheet selection for civil engineering sites, registered as "TH-250021-A" in the Ministry of Land, Infrastructure, Transport and Tourism's NETIS. We can provide proposals tailored to site conditions, from public works to private civil engineering projects.

Thank you very much for your continued support. We sincerely apologize for the inconvenience, but we will be taking our summer vacation on the following dates. ■ Summer Vacation Period ■ From Tuesday, August 11, 2026, to Sunday, August 16, 2026. For details such as shipping schedules, please check our company website via the link below. Please note that we will resume normal operations on August 17. Inquiries during the vacation period will also be addressed after August 17. We apologize for any inconvenience this may cause and appreciate your understanding. Earth Power Co., Ltd.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.