[Exhibition Participation] AXIA EXPO 2026 Hydrogen and Ammonia Next-Generation Energy Exhibition

Introducing the forefront of development! Hydrogen combustion without carbon dioxide emissions! SHOEI is advancing the hydrogen compatibility of its proven in-house burners.

【New Development! Hydrogen Gas Burner Lineup】 ◇ High-Temperature Furnace Hydrogen Gas Burner (EIS-H2) Achieves a wide combustion range and stable combustion Suitable for heat treatment furnaces, melting furnaces, heating furnaces, deodorization devices, etc. ◇ Package Burner (BJ-H2) ◇ Fan-Equipped Package Burner (SP-H2) Provides stable flames even under high furnace pressure conditions, with good operability and maintainability; suitable for low-temperature fields such as drying furnaces, as well as various industrial furnaces like heat treatment furnaces and deodorization devices. ◇ Hydrogen Combustion Recuperative Burner (STBW-H2) Equipped with a waste heat recovery device (heat exchanger), capable of reducing fuel usage by approximately 30% in addition to decarbonization. Developed in collaboration with Tokyo Gas Co., Ltd. and Tokyo Gas Engineering Solutions Co., Ltd.! Suitable for aluminum melting holding furnaces, preheating, heat treatment furnaces, etc. ◇ Hydrogen Combustion Single-End Radiant Tube Burner (TRFH-H2) Indirect heating method utilizing radiant heat With an integrated heat exchanger, the burner efficiency is 75%, achieving high efficiency. ◇ Hydrogen Combustion Duct Burner (SDC-H2) Converts duct burners mounted on hot air generation devices to hydrogen combustion Suitable for various drying furnaces such as painting drying and food drying.

• Drying Equipment
• Heating device
• Industrial Furnace

A hydrogen burner equipped with a waste heat recovery device has arrived! Not only does it contribute to decarbonization through hydrogen combustion, but it can also reduce fuel usage by approximately 30% due to its built-in heat exchanger.

"Hydrogen combustion," considered a means of decarbonization, developed in collaboration with Tokyo Gas Co., Ltd. and Tokyo Gas Engineering Solutions Co., Ltd.! A hydrogen gas burner based on the highly proven recuperative burner "STBW." Used in manufacturing processes/industrial furnaces that require high-temperature heat, such as aluminum alloy production (melting, holding, and preheating). 【Features】 □ Zero CO2 emissions during combustion due to dedicated hydrogen combustion □ Built-in waste heat recovery system reduces fuel usage by approximately 30%* □ No need for external heat exchangers as waste heat recovery is possible within the burner itself □ Low-cost and compact with a highly efficient combustion system □ Achieves both low NOx and stable combustion □ Hydrogen combustion can be achieved simply by replacing existing burner components □ Capable of dedicated city gas/natural gas combustion, allowing for adaptation to gas supply conditions (*Based on data from actual furnaces using natural gas) The STBW burner you are using can be converted to hydrogen combustion by replacing parts, allowing for evaluation tests on the impact of hydrogen on workpieces and verification of decarbonization. *Hydraulic equipment compatible with hydrogen combustion is required. Please contact us for more details and consultation.

• Heating device
• Industrial Furnace
• aluminum

We are pleased to announce that hot air heating using a hydrogen burner has become possible in the hot air zone of the paint drying furnace (QCO)!

In our company's thermal technology research institute, we have a hybrid painting and drying test furnace (Quick Curing System: QCO) that can accommodate various sizes of workpieces, as well as a complete painting booth and guns! We can conduct various thermal equipment studies, including painting and drying. Additionally, we have recently made it possible to heat the hot air zone of the painting and drying furnace (QCO) using a hydrogen burner. With simple operation, it is possible to switch between LPG and hydrogen for combustion.

• Drying Equipment
• Industrial Furnace
• Hot air generator

Successful stable combustion of ammonia combustion. Introducing a heat recovery burner with built-in heat exchanger! Contributing to decarbonization and low carbonization in high-temperature fields.

The "ammonia combustion burner," considered one means of decarbonization, has successfully achieved stable combustion in ammonia-only operation with Daigas Energy Co., Ltd., a 100% subsidiary of Osaka Gas Co., Ltd., using a heat exchanger-integrated waste heat recovery burner. It has also achieved a mixing ratio with city gas ranging from 0% to 100%, contributing to the decarbonization and low carbonization of high-temperature fields such as aluminum production. This burner can be used in industrial furnaces and thermal equipment that require high-temperature heat, including aluminum manufacturing processes (melting, holding, preheating) and heat treatment, as well as in the automotive and automotive parts manufacturing sectors. 【Features】 - Zero CO2 emissions during ammonia-only combustion - Achieves stable combustion in ammonia-only operation - Stable combustion with city gas mixing in the range of 0% to 100% - High efficiency, space-saving, and low-cost with a heat exchanger-integrated waste heat recovery design By developing a dedicated nozzle optimized for mixing fuel gas and air for ammonia co-combustion, stable combustion has been achieved across a wide ammonia mixing ratio of 0% to 100% at a combustion volume of 50 kW. Moving forward, we will work on resolving remaining issues such as NOx reduction and aim for early practical application.

• Heating device
• Industrial Furnace
• Other heating equipment

A test furnace based on actual equipment that uses a hydrogen burner for melting and an electric heater for holding. It is possible to conduct thorough tests for decarbonization in aluminum casting sites together with our customers!

It is possible to conduct aluminum melting tests using hydrogen combustion with ingot input. Please use it to verify the quality of the molten metal and its impact on the products. The melting gas burner employs a hydrogen burner and electric heaters for retention! It is a hybrid furnace that enables carbon neutrality. By exchanging burner components, you can switch between fuel gases (hydrogen/LNG (natural gas)/LPG), allowing for adaptability based on gas supply trends. Additionally, the furnace structure has a high oxide suppression effect, which you can verify in actual operation. We are committed to solving problems in aluminum casting sites and promoting low carbonization. Please feel free to reach out to us. ~Equipment Overview~ Test Furnace: Aluminum Handheld Melting Retention Furnace (Oxide Suppression Structure) Model: SMH-150H2 Melting Capacity: 150kg/h Retention Capacity: Retention Chamber 800kg/ch *Actual effective capacity during continuous melting, specific gravity 2.4 Melting Temperature: 660–680℃ Control Accuracy: ±5℃ ~Heat Source Configuration~ Melting Burner: Hydrogen Combustion Burner 116kW x 1 unit Retention Heater: Immersion Type Electric Heater 9kW x 2 units Fuel Used: Hydrogen (city gas 13A and propane gas are also possible) Power Supply: 200V/60Hz for power, 100V for operation

• Electric furnace

At Seiei Manufacturing, we are proposing low-carbon painting drying ovens to respond to a decarbonized society.

At Shoei Manufacturing, which has extensive experience with painting drying ovens and exhaust gas treatment systems, we offer a lineup of "hydrogen combustion type" and "electric heater type." By using "renewable energy sources" and "hydrogen fuel," we can achieve decarbonization. Even if these options are not currently available, we can adapt to the uncertain future of energy supply by introducing: - A hybrid type that electrifies part of the heat source configuration - Hydrogen gas burners that can also use city gas/propane gas. 【Painting Baking Drying Oven】 Hot Air Zone (100–250°C) ⚪︎ Hydrogen combustion hot air generator "AH-H2" ⚪︎ Electric hot air generator "AH-E" Radiant Baking Heating Zone (700–850°C) ⚪︎ Electric infrared heater ⚪︎ Hydrogen combustion burner Water Removal Drying Oven (100–150°C) / Booth Heating ⚪︎ Hydrogen combustion hot air generator "AH-H2" ⚪︎ Electric hot air generator "AH-E" 【Exhaust Gas Treatment System / VOC Treatment】 ⚪︎ Electric catalytic deodorization device (CT) ⚪︎ Electric regenerative thermal oxidizer (RTO) Our Thermal Technology Research Institute is equipped with a painting drying test oven (QCO) with a painting booth.

• Painting Machine
• Drying Equipment
• Heating device

Exhibition of Coatings and Painting Equipment - COATING JAPAN - at Makuhari Messe (November 12-14) confirmed! We will introduce hot air generation devices and VOC removal equipment.

We are pleased to announce that Shoei Seisakusho, a manufacturer of gas burners and industrial furnaces, will be exhibiting at the "Paint and Coating Equipment Exhibition" held at Makuhari Messe. We will showcase a panel display of our lineup, including hot air generators for painting and drying equipment, as well as deodorization devices (VOC removal devices). We will also introduce examples of energy-saving equipment and decarbonization items using hydrogen gas burners. <Deodorization Device Lineup> Direct combustion deodorization device (CH): Oxidative decomposition at high temperatures of 700-800°C. Catalytic combustion deodorization device (CT): Processes at low temperatures using a catalyst. Electric type is also available. Regenerative thermal oxidizer (RTO): An energy-saving type boasting a thermal recovery rate of up to 97%. <Hot Air Generator Lineup> Flexible selection according to drying equipment. - Clean hot air can be selected in either gas or electric types (Electric type AH-E, indirect heating type AH-BX). - Compatible with hydrogen combustion (AH-H2). - Can handle high furnace pressure (AH-B). - Provides high-temperature hot air up to 800°C (AH-B). - Hot air return is possible (AH-B, AH-D, AH-E). - Customizable design according to installation location (all AH models). - Equipped with various safety devices as standard. Additionally, we will display our latest products.

• Painting Machine
• Drying Equipment
• Deodorizing Equipment

This year, we are offering a special public release of previously unpublished seminar videos! We have included a wealth of content that will be useful for analysts, ranging from basic explanations to advanced techniques. You can also download technical materials. 【Videos】 Latest GC columns effective for trace analysis and MS application examples Extreme series: GC WAX column edition, medium polarity GC column edition, PLOT column edition, amine-specific GC column edition, and more. 【Materials】 Development of a simultaneous analysis method for 45 components of ultra-short to long-chain PFAS Newly developed! Evaluation of high-inert GC columns (SVOC analysis) Stability evaluation of PFAS standard solutions Development of an analysis method for 21 PFAS components in milk, and more. -------- 【Highlights of the Real Exhibition】 Booth No. 8B-605 In trace analysis, if you are experiencing "low sensitivity" or "the calibration curve bends on the low concentration side," the cause may be the column. Restek's proposed new technology, "RMX GC Column," suppresses adsorption loss in low concentration areas through its unique inertization treatment. It achieves good peak shape and high reproducibility even for compounds at the picogram level, which are difficult to detect with conventional columns. At the booth, we will provide technical explanations along with actual measurement data, and you can also consult about challenges in the analysis field.

Non-specific adsorption (NSA) and non-specific binding (NSB) to metal surfaces are major causes of peak disappearance, sensitivity reduction, and poor reproducibility in the LC MS/MS analysis of pesticides, mycotoxins, and acidic polar compounds. Traditionally, the only way to address these issues was through complex conditioning or "band-aid" solutions using mobile phase additives. In this webinar, we will provide a detailed explanation of how Restek's Inert LC column technology fundamentally resolves these challenges, supported by real data. We will showcase how the Inert series, including Raptor ARC 18 and Raptor Biphenyl, improves peak shape, peak area, and LOD for metal-sensitive compounds, with specific examples from pesticide analysis, mycotoxins, PFAS, and phthalate ester analysis. This content is recommended for anyone involved in multi-component analysis using GC/MS, whether for target or non-target analysis, and for those who are just starting. We will explain it in an easy-to-understand manner for GC/MS beginners. https://attendee.gotowebinar.com/register/1160201828261205080

[Instructor] Takuya Sugawara, Head of AI Business, Sanshin Co., Ltd. [Key Lecture Content] Voices such as "We can't hire people even if we post job openings" and "We don't have the capacity for training" are not uncommon in the management scenes of small and medium-sized enterprises. To break the labor shortage, what is needed is not to increase the number of people but to increase "the capabilities of the employees we currently have." In this seminar, we will organize the use of "AI agents" that take on daily tasks such as document creation and data processing, thereby enhancing the responsiveness of each employee as a management system. We will explain in an easy-to-understand manner the concept of reallocating time gained through efficiency improvements to tasks that have been postponed, such as information gathering, internal analysis, and information dissemination, as well as how to elevate the skills of both veteran and younger employees through dialogue with AI, and provide real examples that illustrate the changes after implementation. This seminar can be utilized as material for business owners and management planners to consider a system that simultaneously balances defensive and offensive strategies.

This is an exhibition introducing another face of Tsujikawa, the 3D modeling business. We provide comprehensive support from the creation of 3D data to modeling and finishing, achieving high-precision three-dimensionalization from sketches and scans of actual objects. We cater to a wide range of needs, including super-large modeling, store fixtures, and character modeling. By combining our experience in embellishing paper and packaging with three-dimensional modeling, we propose the creation of ideal spaces that expand from two dimensions to three dimensions and into space, as only professionals can. We invite you to visit the Tsujikawa booth. *Osaka Industrial Creation Center, 3F Market Plaza, Booth No. 30

[Speaker] CEO of AnPrenergy Co., Ltd. Director of the Japan Renewable Energy Regional Resource Development Organization, Mr. Takashi Muratani [Lecture Items] 1. Starting with three questions from the field 2. September 1, October 1, and the next - System changes coming in three stages 3. Viewing "distortions" through numbers 4. Pathways to prevention - Three markets + Negativity-Positivity type distribution 5. Defensive operations and system risks 6. Summary - Two changes by 10/1, three adjustments by the end of the year 7. Q&A / Business card exchange *As a seminar participation benefit, a "Management Checklist" will be provided.