We will be exhibiting at Smart Sensing 2026 from June 10 to 12.

Ideal for applications that require compliance with IAQ standards such as RESET!

The "SEN62" is a sensing platform for measuring PM and RH/T. By combining multiple sensors in a form factor, it can measure up to six environmental parameters (PM1, PM2.5, PM4, PM10, T, RH). Its innovative design enables simplification of integration, cost reduction, and customization. At the core of the SEN62 is the new compact MEMS-based particulate matter sensing element, the SPS6x. 【Specifications (partial)】 ■ Mass concentration range: 0 - 1000μg/m3 ■ Standard relative humidity accuracy: 4.5% RH *For more details, please download the PDF or feel free to contact us.

• Sensors

Ideal for applications requiring compliance with IAQ standards such as RESET!

The SEN63C is a sensing platform for measuring PM, RH/T, and CO2. By combining multiple sensors in a form factor, it can measure up to seven environmental parameters (PM1, PM2.5, PM4, PM10, T, RH, CO2). Its innovative design simplifies integration, reduces costs, and allows for customization. At the core of the SEN63C is the new compact MEMS-based particulate matter sensing element, the SPS6x. 【Specifications (partial)】 ■ Mass concentration range: 0 - 1000μg/m3 ■ Standard relative humidity accuracy: 4.5% RH ■ CO2 measurement range: 0 - 32000ppm ■ Accuracy: ±100.0 *For more details, please download the PDF or feel free to contact us.

• Sensors

Suitable for applications that require compliance with IAQ standards such as RESET!

The "SEN65" is a sensing platform for measuring PM, RH/T, VOC, NOx, and CO2. By combining multiple sensors in a form factor, it can measure up to 9 environmental parameters (PM1, PM2.5, PM4, PM10, T, RH, VOC index, NOx index, CO2). Its innovative design allows for simplified integration, cost reduction, and customization. Additionally, the core of the SEN66 is the new compact MEMS-based particulate matter sensing element, the SPS6x. 【Specifications (partial)】 ■ Mass concentration range: 0 - 1000μg/m3 ■ Standard relative humidity accuracy: 4.5% RH ■ Specified CO2 measurement range: 0 - 40000ppm ■ Accuracy: ±50.0 ■ Sensor output: 0-500 VOC Index *For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment
• Other Sensors

Compliant with UL standards for refrigeration and freezing equipment, as well as air conditioning units. Supports IP54, suitable for harsh conditions and outdoor applications.

The "SGD43S-M3-Sx" is a refrigerant detection sensor that has obtained UL certification as an RDS (Refrigerant Detection System) and is compatible with applications using A2L refrigerants. With an IP54 rating for dust and water resistance, it demonstrates stable performance even in outdoor or harsh environments. Based on a detection method utilizing thermal conductivity principles, it achieves fast response and long-term stability, while also offering maintenance-free operation with a lifespan of over 15 years, contributing to both safety and cost-effectiveness. 【Product Lineup】 ◎ For HVAC applications: "SGD43S-M3-S5" Supports monitoring of R-454B and R-32 through dual calibration, compliant with UL60355-2-40. ◎ For refrigeration and freezing applications: "SGD43S-M3-S7" Supports monitoring of R-454A, R-454C, and R-455A through triple calibration, compliant with UL60335-2-89. *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.

• Other Sensors

Meeting the needs of various customers! CO2 accuracy of 400-2000ppm, ±50ppm + 5% M.V. (reading value)

The "SCD40" is a compact CO2 sensor that achieves a high cost-performance ratio. By combining tape and reel packaging with SMD assembly processing, it is suitable for mass production applications. This sensor utilizes the photoacoustic sensing principle and Sensirion's proprietary technologies, PASens and CMOSens, to achieve an unparalleled small size and high performance. 【Specifications (partial)】 ■ CO2 output range: 0 - 40000 ppm ■ Specified CO2 measurement range: 400 - 2000 ppm ■ Accuracy: ±50.0 ppm ±5.0% m.v. ■ Response time (τ63%): 60s 【Applications】 Ideal for various commercial and residential HVAC applications. ■ Air purifiers ■ Air conditioners ■ Thermostats ■ Ventilation systems ■ Air quality monitoring devices *For more details, please download the PDF or feel free to contact us.

• Gas Detection Sensor

It can be integrated into cost-effective and space-efficient solutions!

The "SAEN Series" is an integrated environmental sensor that simplifies in-vehicle air quality monitoring through an all-in-one environmental platform. The modular platform combines multiple sensors in special sizes and shapes, capable of measuring up to 8 environmental parameters (PM1, PM2.5, RH/T, CO, CO2, NOx, VOC). At its core is a miniaturized MEMS-based PM sensing element. By geometrically arranging the light source, detector, signal processing, and algorithms, it can be integrated into a cost-effective and space-efficient solution. 【Features】 ■ All-in-one environmental platform (PM1, PM2.5, RH/T, CO, CO2, NOx, VOC) ■ In-vehicle comfort through CO2 concentration monitoring ■ Fully customizable to meet the needs of various applications ■ Dustproof and long-lasting ■ Simplified integration, cost reduction, and energy savings *For more details, please download the PDF or feel free to contact us.

• Sensors

Optimize the recirculation rate using real-time CO2 measurements to improve efficiency and indoor air quality!

The "SACD series" is a CO2 sensor that accurately and continuously measures CO2 concentration. The CO2 concentration measured inside the vehicle can also be used to utilize recirculation more efficiently, rather than relying on general estimates based on the number of passengers. Additionally, with configurable alarm levels, it enables personalized thresholds, proactive alerts, and timely responses to critical situations. 【Features】 ■ Robust photoacoustic measurement technology ■ Configurable alarm levels ■ Low power monitoring mode ■ Compact design that can be installed discreetly in the vehicle ■ LIN interface, always-on 12V compliant with bus wake-up support *For more details, please download the PDF or feel free to contact us.

• Gas Detection Sensor

Compact shape that is easy to install! Offers various options for integration, installation, and communication interfaces.

The "SACT Series" is an in-vehicle temperature sensor that monitors the temperature inside the cabin and communicates the measurements to the HVAC system, enabling appropriate ventilation and heating. The sensor's low-noise fan promotes rapid adjustment actions of the HVAC controller, reducing the amount of energy needed to maintain the vehicle at the set temperature. For a system design that considers an environment that enhances passenger health, it can also be integrated with relative humidity and air quality sensors. 【Features】 ■ Accurate temperature output ■ Low-noise fan ■ Analog interface ■ Compliant with RoHS and REACH *For more details, please download the PDF or feel free to contact us.

• Temperature Sensor

We offer multiple options regarding installation methods, electrical interfaces, and more! They can be customized according to your specifications.

The "SAAF Series" is a fog detection/automatic de-icing sensor that enhances visibility while reducing the energy required for defogging and de-icing the windshield, maximizing passenger comfort and safety. This product is fully calibrated, linearized, and temperature compensated, utilizing the thermal coupling of the windshield to communicate the timing for activating the de-icing mode to the HVAC controller. Please feel free to contact us when you need assistance. 【Features】 ■ Calibrated, linearized, and temperature compensated signals ■ Flexible installation with brackets or tape ■ High durability and reliability with automotive-grade connectors ■ Customer-specific solutions *For more details, please download the PDF or feel free to contact us.

• Sensors

High added value, high versatility, up to 40ml/min! Provides excellent chemical resistance and outstanding media compatibility.

The "SLF3S-1300F" is a liquid flow sensor that combines our long-standing excellent track record in low and minimum flow sensing with a thoroughly optimized mechanical design, elevating its already well-established functionality to a higher level in terms of price-to-performance ratio. This sensor provides the highest level of safety, stability, and long-term reliability across a wide range of fields, including diagnostics, analytical equipment, and life sciences. Based on our proven CMOSens Technology, we optimize costs by simplifying the design without compromising fluid, electrical, or mechanical connections. 【Specifications (partial)】 ■ Full-scale flow rate (H2O): 40ml/min ■ Accuracy (H2O): 5% ■ Repeatability (H2O): 0.5% ■ Full-scale flow rate (IPA): 40ml/min ■ Accuracy (IPA): 10% *For more details, please download the PDF or feel free to contact us.

• Flow Sensor

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.