Exhibiting at the "2026 NAGOYA Automotive Technology Exhibition"

Familiar to the hand and easy to use design! Equipped with a memory function convenient for checking measurement results.

The "HT-3200" is an easy-to-use, high-performance compact handheld contact digital tachometer. It has a wide measurement range from 0.5 r/min at low speeds to 10,000 r/min, and the measurement results can be stored in internal memory as a history, allowing for up to 10 entries, which is convenient for verification and recording after measurement. By using a peripheral speed ring, it can also be used as a peripheral speed meter. Additionally, we offer the non-contact "HT-4200" and the dual-purpose contact/non-contact "HT-5500" in our lineup. 【Features (HT-3200)】 ■ Contact type ■ Automatic repetitive measurement with changing display values every second while the measurement switch is pressed ■ Memory function for convenient confirmation of measurement results ■ Ergonomically designed for a comfortable grip and ease of use ■ Can also be used as a peripheral speed meter with the use of a peripheral speed ring ■ Holds and displays the final measurement value for about 30 seconds after measurement *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• others

Non-contact detection of manufacturing line speeds and speed variations! High-sensitivity, high-response laser in-plane velocimeter.

The "LV-7000 Series" is a high-sensitivity, high-response laser in-plane velocimeter that detects the speed, speed variation, and distance/length of moving objects such as lines and rotating bodies without contact. Since it can detect without contact, it can be easily installed and measured in locations that were previously difficult to measure. Additionally, by using this product, it becomes possible to evaluate product characteristics that were previously hard to assess more accurately, allowing for better understanding of phenomena, selection of materials, improvement of component quality, and reduction of waste materials. 【Features】 ■ Complies with laser safety class 2 for high-sensitivity detection ■ Measurement possible without load and without contact ■ High functionality with simple operation *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• others

Further high precision and efficiency in quality inspection of semiconductors, EVs, and secondary batteries.

As a successor to the long-selling product "CL-5610 series," this new model significantly enhances measurement accuracy and response performance, and includes new features such as temperature measurement and Ethernet communication. It strongly supports the efficiency of inspection processes and quality improvement. This product accommodates thickness measurement of various materials, including silicon wafers, electromagnetic steel sheets for motors, and films for EV batteries. By combining with a variety of displacement sensors, it evolves quality control on production lines to achieve high precision and speed.

• Other measurement, recording and measuring instruments

Achieving high sensitivity and stable measurement - Flagship model of GPS speedometer.

The lineup of GPS speedometers has been completely renewed. The LC-8300A is the flagship model from Pioneer and Ono Sokki, the pioneers of speedometers. With our unique IMU (Inertial Measurement Unit) correction algorithm, it achieves stable speed measurement even in urban areas where radio interference is likely due to trees and buildings, unaffected by testing environments. It is equipped with a wealth of testing functions that comply with regulations, making it suitable for various vehicle tests. With a compact body design and simple configuration, testing can be conducted without a PC. It can be utilized for a wide range of testing and measurement needs.

• Other measurement, recording and measuring instruments

Accurate detection of even the slightest changes - Flanged high-rigidity torque detector -

Improving energy efficiency is a challenge in next-generation vehicles. To address this challenge, it is necessary to more accurately understand energy losses, and to precisely capture even slight torque fluctuations in the power transmission mechanism. The TQ-3507 flange-type high-rigidity torque detector, developed with a target torque capacity of 5 kNm, can accurately detect minute torque variations.

• Torque Meter

Expand 'hakaru' to measure the torque of various products.

In the automotive industry, electrification is rapidly advancing, and many types of motors are being used, leading to a demand for motors that minimize cogging torque and torque ripple, which can cause vibrations and noise. Therefore, there is a need for a highly rigid torque detector that can accurately capture torque fluctuations. On the other hand, there is an increasing demand for high-speed rotation specifications for motors used in EV scooters and compressors for air conditioners overseas. We have developed a torque detector that can meet these demands.

• Torque Meter

A detector optimal for measuring rotational speed. Detection distance from the gear expanded up to a maximum of 3 mm.

The MP-9810 and MP-9830 are non-contact magnetic-type rotation detectors that incorporate magnetoresistive elements, permanent magnets, DC amplifiers, and voltage regulators within a compact body. They output a stable rectangular wave signal by being positioned close to the tips of the detection gear attached to the rotating shaft, functioning effectively from ultra-low to high speeds. Applications can be built by combining them with devices such as the TM-4000 series digital tachometers and FV-1500 FV converters to measure the rotational speed of various rotating equipment. - Detection distance from the gear can be extended up to 3 mm. - Compatible with power supply voltages of 12 to 24 V, enhancing convenience during equipment integration. - Improved environmental resistance, compliant with IP67. - Retains the basic performance, dimensions, and mounting shape of conventional models, ensuring easy replacement.

• Other measurement, recording and measuring instruments

A new standard for tachometers that integrates four models.

Revamping the lineup of digital tachometers. The TM-3100 series has been redesigned, giving birth to the new digital tachometer "TM-4000 series," which integrates a multifunctional tachometer, reversible counter, and passage time/passage speed meter. While inheriting the functions and performance of the previous models, it pursues high precision and high responsiveness. Users can select the input format according to the connected external devices and sensors, allowing for customization by combining various functions such as analog output, comparator output, and DC power supply. The TM-4000 series meets the diverse needs of rotational speed measurement and supports the realization of DX and smart factory initiatives.

• Other measurement, recording and measuring instruments

Tangled cables and no worries about installation location: simultaneous wireless measurement of temperature and voltage.

Our wireless measurement system uses compact measurement modules, allowing for quick setup and measurement in locations where installation and wiring are difficult, without complicated work, and enabling measurements of temperature and pressure that do not interfere with the measurement environment. Additionally, it can simultaneously measure up to 200 channels, making it ideal for detailed temperature distribution measurements. The wireless measurement system monitors changes in temperature and pressure across multiple channels wirelessly, supporting energy conservation and improved energy efficiency.

• Temperature and humidity measuring instruments

Easy-to-read large color LCD! Compact size for easy handling and user-friendly high-performance sound level meter.

The "LA-7000 Series" is a noise meter that significantly improves operation through the adoption of a large color LCD touch panel, allowing for easy and intuitive operation to start measurements. In addition to measuring and calculating the original noise level, it is also possible to "measure while listening to the sound" during measurements. This enables safe and reliable measurements in environments where mistakes are not allowed. With just one unit, it can perform noise measurement, sound recording, frequency analysis, and sound source exploration of abnormal noises, greatly improving the efficiency of measurement tasks. 【Features】 ■ Large, easy-to-read 4.3-inch color LCD (equivalent to a smartphone) ■ Start recording with just one tap ■ Equipped with listening function ■ Achieved a 35% reduction in size compared to the previous model ■ Includes hand strap ■ Intuitive operation via touch panel *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Noise Inspection
• others

For noise reduction measures in EVs and home appliances. A low-noise measurement solution that accurately captures subtle sounds in the 10 dB range (A-weighted), which is difficult to measure with standard microphones.

■Limit performance of self-noise at 4.5 dB, with the simplicity of direct BNC connection. In recent years, the challenge of "noise reduction" has become unavoidable in the development of home appliances and EVs (electric vehicles). This product is an ultra-low noise measurement microphone that achieves an overwhelming low noise performance with a self-noise level of 4.5 dB (representative value). By adopting the CCLD (Constant Current Drive) method, which eliminates the need for expensive external amplifiers and dedicated power supplies that were essential in conventional low-noise measurements, it allows for direct connection to the analyzer with a single BNC cable, simplifying the measurement system and reducing costs simultaneously. <Main Features and Benefits of Implementation> - Accurately captures micro sounds in the 10 dB range (A-weighted). - CCLD method and direct BNC connection eliminate the need for amplifiers. - TEDS compatible to eliminate setup errors. - Versatile support from field measurements to R&D.

• Noise Inspection
• Acoustic Analysis

An analysis system that allows acoustic vibration analysis to be performed "anywhere, anytime, easily."

The O-Solution DS-5000 acoustic vibration analysis system, released with the concept of "anywhere, immediately, easily," leverages the digital signal processing technology that Ono Sokki has cultivated over more than 40 years and incorporates feedback from customers in various fields. "Anywhere" - Compact and lightweight, battery-operated, and features strong noise isolation. "Immediately" - Switch between measurement and analysis with one click and quickly check data. "Easily" - Automate processing with external control functions. It enables highly accurate measurement and analysis.

• Time-frequency measurements

A portable FFT analyzer with innovative features and a tough body.

The CF-9200A/CF-9400A (CF-9000A series) is an all-in-one portable-style FFT analyzer. It does not require an analysis PC, and all operations of the FFT analyzer can be performed using only the hardware keys and the capacitive touch panel on the main unit. With a newly developed 24-bit A/D converter and a high-performance front end capable of 100 kHz analysis, it allows for easier and more reliable analysis of noise and vibrations emitted by mechanical devices such as plant piping, pumps, motors, automobiles, railways, and home appliances, compared to conventional models. Additionally, it responds to field solutions requiring FFT analysis, such as resonance and frequency characteristic analysis of mechanical structures using electromagnetic exciters or impulse hammers.

• Time-frequency measurements

No more tedious calibration work with TEDS support! Measurement microphones MI series.

The "MI-1271M12" consists of a free-field type 1/2-inch electret condenser microphone that complies with IEC 61094-4 Type WS2F and a preamplifier. By adopting a titanium diaphragm for the microphone and improving electret performance, it achieves long-term stability and a wide frequency range from 1Hz to 20kHz. It can also be used in a wide temperature range from -30°C to +80°C. When connected to TEDS-compatible equipment, information such as sensitivity is automatically read, eliminating the need for cumbersome calibration work, enabling reliable measurements and time savings. 【Features】 ■ No need for cumbersome calibration work with TEDS compatibility ■ Achieves long-term stability and a wide frequency range from 1Hz to 20kHz ■ Usable in a wide temperature range from -30°C to +80°C ■ Can be directly connected using a BNC cable to equipment equipped with CCLD (constant current drive) power supply *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments
• Other measurement, recording and measuring instruments

Pursuing the precision of acoustic measurement. The MI series measurement microphones from Ono Sokki achieve both high sensitivity and wide bandwidth.

Improvement of automotive quietness, abnormal noise inspection of home appliances, vibration analysis of precision instruments. High-precision sensors that do not miss subtle air vibrations are essential for "accurate acoustic measurements" required in manufacturing sites. 【Features】 The MI series from Ono Sokki is a measurement microphone with a wide lineup ranging from the industry-standard 1/2 inch to ultra-high frequency compatible 1/4 inch. ● High sensitivity and low noise design: Achieves accurate data collection without distortion, from faint sounds to high sound pressure. ● Excellent environmental resistance: Maintains minimal sensitivity changes even in harsh field environments, ensuring reliability for long-term measurements. ● Easy setup: The preamplifier integrated model compatible with BNC connectors allows for smooth connection to acoustic analyzers (FFT analyzers). You can choose the MI series according to your application, from research and development to inline inspection. The MI series visualizes sound and strongly supports the improvement of product quality and reduction of development time for our customers, providing a solution for acoustic measurement.

• Sensors
• Time-frequency measurements
• Noise Inspection

It is ideal for vibration measurement on-site.

The VW-3100 is a portable vibration meter that integrates the functions of "listening," "measuring," and "judging," which are essential for on-site vibration measurement, all in one device. It solves problems with sensing and signal processing technologies provided by Ono Sokki, a manufacturer of measuring instruments. 【Four Key Points of the New Product】 - V3 band x 3 vibration values can be measured and displayed simultaneously, allowing for accurate detection of abnormalities and improved work efficiency. - The listening function utilizing a variable bandpass filter captures unusual sounds, facilitating sharing with workers and knowledge transfer. - Recording can be done simultaneously with inspections (ORF/WAV), leading to precise diagnostics with post-analysis tools like O-Solution. - A wide range of options is available to assist with on-site measurement and evaluation.

• Vibration Inspection
• Other environmental analysis equipment
• Vibration Monitoring

Achieving high-precision vibration monitoring at production equipment maintenance sites at low cost.

The "VC-2200/3200 series" is a high-performance signal processor that inputs signals from accelerometers, enabling the detection, measurement, and judgment of machine abnormalities, vibration level confirmation, and level determination based on vibration values. Equipped with functions such as TEDS, it reduces setup time and prevents configuration errors. It enables high-functionality and high-precision vibration monitoring at low cost across various fields, including maintenance and continuous monitoring of production equipment. 【Features】 ■ TEDS function (effective when connected to an accelerometer with TEDS capability) ■ Logarithmic bar indicator (improves visibility during small vibration detection) ■ Headphone volume MUTE function (protects ears from impact noise when sensors are attached) 【Use Cases】 ■ Determining product quality based on vibration ■ Detecting abnormal machine operation ■ Monitoring abnormalities in bearings, gears, etc., of production equipment ■ Detecting tool blade breakage and wear *For more details, please refer to the PDF document or feel free to contact us.

• Vibration Testing
• Vibration Inspection
• Vibration Monitoring

A non-contact laser Doppler vibrometer that pursues ease of use by confirming the laser irradiation position with an internal camera.

The "LV-1800" is a non-contact vibration meter that achieves over 10 times the sensitivity of conventional products due to a newly designed interference optical system, and it also allows for confirmation of the laser irradiation position with a built-in camera. In addition to quickly and easily detecting vibrations, when combined with a waveform analysis device (FFT analyzer), it not only measures vibrations but also accurately captures, visualizes, and analyzes the state of the vibrations. 【Features】 ■ High-sensitivity camera integrated with the sensor ■ Significantly improved detection sensitivity ■ Wide range of measurement targets ■ Easy to grasp both the focal position and detection status at a glance *For more details, please refer to the PDF document or feel free to contact us.

• Ultrasonic Cleaner
• Vibration Testing
• Vibration Inspection

Due to its small size and lightweight, it can be easily attached to the measurement target and is easy to handle!

At Ono Instruments, we handle the accelerometer 'NP-2000 series,' which extracts mechanical vibration quantities as electrical signals proportional to vibration acceleration. We offer seven types, ranging from ultra-compact to general-purpose and high-temperature compatible types, allowing you to select the appropriate detector based on your intended use, conditions, and application. Since it is a charge output type, a charge amplifier is required; however, compared to built-in preamplifier types, it can generally be used at higher temperatures. 【Features】 ■ As a size-mode* vibration detector, no reference point is needed for measurement. ■ Compact and lightweight, making it easy to attach to the measurement target and simple to handle. ■ Wide dynamic range, capable of measuring from very small accelerations. ■ Strong mechanical strength, recommended for measuring large accelerations and shock accelerations. ■ Capable of measuring waveforms containing wideband frequency components without distortion. ■ Usable at higher temperatures compared to built-in amplifier types. *Refers to a vibration meter consisting of mass (M), spring constant (K), and viscous resistance (C). *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Vibration Testing
• Vibration Inspection

Wide dynamic range, capable of measuring from minute accelerations! Built-in preamplifier.

At Ono Instruments, we offer the accelerometer, 'NP-3000 Series', which extracts mechanical vibration amounts as electrical signals proportional to vibration acceleration. We have 17 types available, ranging from ultra-compact models to 3-axis types that can capture vibrations in the XYZ directions simultaneously, as well as waterproof and high-sensitivity types. You can choose the appropriate detector based on your intended use, conditions, and application. Additionally, since the detector itself has a built-in preamplifier, it allows for relatively inexpensive construction of the sensor signal input section and can be directly connected to our FFT analyzers and other analysis equipment. (Note that it may not be possible to connect directly to older FFT analyzers and similar equipment.) 【Features】 ■ As a size-modulated vibration detector, no reference point is required for measurement. ■ Compact and lightweight, making it easy to attach to measurement targets and simple to handle. ■ Wide dynamic range, capable of measuring from very small accelerations. * A vibration meter consisting of mass (M), spring constant (K), and viscous resistance (C). * For more details, please refer to the PDF materials or feel free to contact us.

• Sensors
• Vibration Testing
• Vibration Inspection

Yamawa Manufacturing Co., Ltd. will exhibit at "JIMTOF 2026, the 33rd Japan International Machine Tool Fair," which will be held at Tokyo Big Sight from October 26 (Monday) to October 31 (Saturday), 2026. We will be showcasing two new products from our highly acclaimed ultimate professional tool "Z-PRO," optimized for machining! Don’t miss this opportunity to visit our booth. 【Highlights】 We will display two new products from the "Z-PRO" brand. We have prepared many short videos to solve tapping troubles! We will thoroughly explain examples of failures and successes in tapping. Live demonstrations using the precision tapping machine 'TTTsystem' will be available.

[Speaker] Masanori Hayashi Evangelist, NTT Docomo Business, Inc. Visiting Researcher, GLOCOM, International University [Key Lecture Content] The application areas of AI are expanding from generative AI to AI agents and physical AI, while the main battlefield of AI infrastructure is shifting from learning-centric to inference-centric. Against the backdrop of rapidly growing AI demand, investments and entries into AI data centers by various businesses are accelerating. However, new challenges are emerging, such as increasing power and cooling demands, responses to data sovereignty, and the utilization of GX strategy regional systems for data center aggregation. This lecture will overview the latest trends in the AI data center market and investment trends, as well as organize technological innovations such as GPUs, liquid cooling, and all-optical networks, along with policy and institutional trends and industrial challenges. Furthermore, it will envision the future of a decentralized AI infrastructure that connects AI factories, data centers, and the edge, and discuss new industrial foundations and future competitive axes through watt-bit collaboration.

[Speaker] Ren Taro Hayashi, Senior Manager, Environmental, Energy, and Resource Strategy Group, Research and Consulting Division, Japan Research Institute, Ltd. [Lecture Items] 1. Overview of Data Centers 2. Impact of Data Centers on the Power Industry 3. Policy Trends in Data Centers and Power (1) GX2040 Vision (2) Watt-Bit Collaborative Public-Private Discussion (3) GX Industry Location Working Group (4) Japan Growth Strategy 4. Future Approaches to Power Procurement for Data Center Development 5. Q&A / Business Card Exchange

This year, we will be holding the large exhibition "Wood and Living Expo" organized by Nice! Approximately 150 domestic housing and building material manufacturers will gather to showcase the latest equipment and noteworthy new products. Additionally, many specialized seminars will be held to learn about the latest industry trends and future outlooks! It will be a two-day event filled with business tips and seeds for new proposals. We sincerely look forward to your visit. ■ Dates: October 15, 2026 (Thursday) 10:00-17:00 October 16, 2026 (Friday) 10:00-16:00 ■ Venue: Pacifico Yokohama, Hall C&D ■ Organized by: Nice Co., Ltd., Wood and Housing Research Association, and the Trustworthy Renovation Promotion Association ■ Official website: https://woodlivingfair.jp/ ■ Pre-registration: https://www.tenjikai-uketsuke.com/form/wood-living-expo-2026/ *Pre-registration is required for attendance. When registering, please select "R&D Center" as the Nice department.

In November 2025, the revised "Good Manufacturing Practice (GMP) for Medical Devices" in China will be announced, with implementation scheduled for November 2026. Local experts will provide a clear explanation of the key points for compliance. < Seminar Topics > - Overview of China's new GMP - Differences from ISO 13485:2016 - New requirements that require particularly careful measures - Anticipated inspection styles