We will be exhibiting at the 2026 Nagoya Automotive Technology Exhibition (June 17-19).

Optimize the recirculation rate using real-time CO2 measurements to improve efficiency and indoor air quality!

The "SACD series" is a CO2 sensor that accurately and continuously measures CO2 concentration. The CO2 concentration measured inside the vehicle can also be used to utilize recirculation more efficiently, rather than relying on general estimates based on the number of passengers. Additionally, with configurable alarm levels, it enables personalized thresholds, proactive alerts, and timely responses to critical situations. 【Features】 ■ Robust photoacoustic measurement technology ■ Configurable alarm levels ■ Low power monitoring mode ■ Compact design that can be installed discreetly in the vehicle ■ LIN interface, always-on 12V compliant with bus wake-up support *For more details, please download the PDF or feel free to contact us.

• Gas Detection Sensor

Achieves high precision and fast response time, enabling quick response during thermal runaway events!

The "SABM Series" is a battery state monitoring sensor that provides the necessary accuracy and high-speed response, allowing vehicles to respond immediately in a short time. It not only detects critical events but also identifies gas generation events such as smoldering of electronic devices, electrolyte leakage, water intrusion, and coolant leakage, enabling early repairs before the battery is completely damaged. By issuing immediate warnings to people inside and around the vehicle, it enhances safety. Please feel free to contact us when needed. 【Features】 ■ Multi-channel thermal runaway detection sensor with unique sensor technology ■ Detects VOCs caused by the vaporization of electrolytes, allowing for early diagnosis of battery condition ■ Capable of 15 years of operation ■ Customer-specific solutions *For more details, please download the PDF or feel free to contact us.

• Sensors

By optimizing the set values of the evaporator, it contributes to both the energy efficiency of the HVAC system and the comfort of the passengers!

The "SADP Series" is a dew point sensor that provides accurate dew point, temperature, and humidity data to HVAC systems, preventing excessive cooling of the cabin temperature and high humidity levels. Our sensor, installed within the HVAC system, communicates with the HVAC controller and activates the evaporator only when necessary. This product is easy to install and has minimized dead volume around the detection element, resulting in a fast response time. It features a standardized LIN interface and a customizable automotive-grade connector. 【Features】 ■ High-speed response due to zero dead space design ■ Waterproof measurement chip (IP6K4 standard) ■ Sealed connectors and housings compliant with USCAR standards ■ Tool-free easy installation with bayonet ■ LIN interface, always-on 12V compliant *For more details, please download the PDF or feel free to contact us.

• Temperature Sensor

It can be integrated into cost-effective and space-efficient solutions!

The "SAEN Series" is an integrated environmental sensor that simplifies in-vehicle air quality monitoring through an all-in-one environmental platform. The modular platform combines multiple sensors in special sizes and shapes, capable of measuring up to 8 environmental parameters (PM1, PM2.5, RH/T, CO, CO2, NOx, VOC). At its core is a miniaturized MEMS-based PM sensing element. By geometrically arranging the light source, detector, signal processing, and algorithms, it can be integrated into a cost-effective and space-efficient solution. 【Features】 ■ All-in-one environmental platform (PM1, PM2.5, RH/T, CO, CO2, NOx, VOC) ■ In-vehicle comfort through CO2 concentration monitoring ■ Fully customizable to meet the needs of various applications ■ Dustproof and long-lasting ■ Simplified integration, cost reduction, and energy savings *For more details, please download the PDF or feel free to contact us.

• Sensors

Compact shape that is easy to install! Offers various options for integration, installation, and communication interfaces.

The "SACT Series" is an in-vehicle temperature sensor that monitors the temperature inside the cabin and communicates the measurements to the HVAC system, enabling appropriate ventilation and heating. The sensor's low-noise fan promotes rapid adjustment actions of the HVAC controller, reducing the amount of energy needed to maintain the vehicle at the set temperature. For a system design that considers an environment that enhances passenger health, it can also be integrated with relative humidity and air quality sensors. 【Features】 ■ Accurate temperature output ■ Low-noise fan ■ Analog interface ■ Compliant with RoHS and REACH *For more details, please download the PDF or feel free to contact us.

• Temperature Sensor

The 15kV ESD protection ensures safe handling on the production line without the risk of damage.

The "SACS Series" is integrated into the seat structure (above the cushion and directly below the cover material) and monitors the humidity and temperature close to the passengers. This information is sent to the HVAC controller, which uses the data to reduce the load and optimize the ventilation of the seats. The sensors are compactly designed, so you won't notice their presence even when seated. 【Features】 ■ Fast response ■ Rounded edges and soft materials for seamless integration that goes unnoticed ■ Smart 3-wire interface that can be easily integrated into the seat cable harness ■ 15kV ESD protection for safe handling on the production line *For more details, please download the PDF or feel free to contact us.

• Temperature Sensor

Enables complete customization for integration with dashboards and HVAC, reducing installation time and costs!

We would like to introduce our PM sensor, the "SAPS Series." When the air quality inside the vehicle changes, it sends an alert via LIN, notifying that adjustments are needed for ventilation and air quality improvement in the HVAC system. Vehicles equipped with this sensor achieve a safe and comfortable driving experience with low PM (particulate matter) concentration and clean air. 【Features】 ■ PM2.5 output ■ Fast response ■ Accurate measurement using laser-based technology ■ Resistance to dust and water ■ Compliant with RoHS and REACH *For more details, please download the PDF or feel free to contact us.

• Sensors

We offer multiple options regarding installation methods, electrical interfaces, and more! They can be customized according to your specifications.

The "SAAF Series" is a fog detection/automatic de-icing sensor that enhances visibility while reducing the energy required for defogging and de-icing the windshield, maximizing passenger comfort and safety. This product is fully calibrated, linearized, and temperature compensated, utilizing the thermal coupling of the windshield to communicate the timing for activating the de-icing mode to the HVAC controller. Please feel free to contact us when you need assistance. 【Features】 ■ Calibrated, linearized, and temperature compensated signals ■ Flexible installation with brackets or tape ■ High durability and reliability with automotive-grade connectors ■ Customer-specific solutions *For more details, please download the PDF or feel free to contact us.

• Sensors

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.