[Free Test Now Available] Announcement of Dust Collector Filter Cleaning Service Launch - Contributing to Cost Reduction and SDGs -

Crushing aluminum cutting chips into a bulk bag. Contributing to work efficiency and environmental improvement.

In the metal processing industry, the handling of chips generated during cutting operations is a significant issue for maintaining the work environment and ensuring safety. Particularly in aluminum processing, chips tend to scatter widely, increasing the effort required for cleaning. The DC5 chip recovery dust collector solves these problems by directly collecting the large amount of cutting debris generated during aluminum thick plate cutting into a bulk bag. "Chip Crusher" To further reduce the frequency of bulk bag changes, we also propose a solution using a "crusher." By chopping the chips into smaller pieces with the crusher, the volume of chips entering the bulk bag is significantly reduced. As demonstrated in the case introduced here, simply re-evaluating the dust collection and recovery system can dramatically improve productivity and cleanliness on the shop floor. 【Usage Scenarios】 - Factories engaged in aluminum cutting processing - Companies looking to improve the work environment affected by chip scattering - Companies aiming to enhance the efficiency of cleaning operations 【Benefits of Implementation】 - Suppression of chip scattering and improvement of the work environment - Increased work efficiency due to reduced cleaning time - Simplification of waste disposal through direct collection into bulk bags

• Plastic processing machines (cutting and rolling)
• Dust collector
• Cyclone dust collector

A large amount of cutting debris generated during the cutting of thick aluminum plates can be directly collected into a bulk bag. When used with a bulk bag transport cart, it greatly improves work efficiency.

This is a simple dust collection machine that collects cutting chips into a Furecon bag. The chips are gathered in the Furecon bag and can be removed from the main unit using a dedicated cart. It helps improve the factory environment in terms of labor-saving and environmental aspects.

• Plastic processing machines (cutting and rolling)
• Dust collector
• Cyclone dust collector

Are you throwing away dirty filters? Contribute to significant cost reduction and the SDGs by cleaning and reusing them!

This is a guide for addressing clogging issues with your current dust collector filter and reducing running costs. By cleaning and reusing used filters instead of disposing of them, you can achieve significant cost savings compared to replacing them with expensive new ones. By preparing a spare filter and organizing a rotation to send the dirty one for cleaning, you can maintain dust collection efficiency while also reducing the frequency of cleaning the machine itself. Additionally, regular replacements help prevent dust-related contamination in the surrounding area and protect employee health as well as the aesthetics of the factory. This also leads to a reduction in waste disposal costs and contributes to efforts towards the SDGs. We offer free sample cleaning for first-time customers.

• Cyclone dust collector
• Bag filter dust collector
• Other dust collectors and related products

Capable of cutting plates up to 200 mm thick. This model has been enhanced for improved functionality, including operability, maintainability, and environmental considerations, to further improve work efficiency.

The URKG cutting machine is a cutting machine that has been developed based on our years of experience in cutting aluminum plates. ■ URKG Series (New Model) - A model that enhances the basic specifications of the URK series. - Maximum thickness expanded to t200mm, improving performance. - Reduced cutting time. Cutting time is shortened by 50% compared to conventional machines using dedicated saw blades. - Cutting widths available in 1000mm / 2000mm / 3100mm, with three models. - Adopted a double circular saw cover with a telescopic cover and self-propelled cover, achieving over 95% chip recovery. - High operability achieved with a large touch panel. - Standard equipped with a workpiece lifting device, improving handling of heavy materials. - Unique anti-pinch device developed to prevent workpiece clamping (anti-pinch device) for 2000/3100 models.

• Special Processing Machinery
• Plastic processing machines (cutting and rolling)
• Other processing machines

Support for thick plates, labor-saving, high-speed running saw. Thick plates can be transported with minimal force. This improves work efficiency and contributes to labor-saving and cost reduction.

The "URKM Series" is a circular saw cutting machine that precisely cuts aluminum plates. In addition to its powerful performance and efficient dust collection, the cutting conditions minimize cutting heat, reducing overcutting and enhancing machining accuracy. It allows for the selection of the optimal saw blade for cutting thick aluminum plates, enabling a reduction in cutting time. Reference cutting speed for A5052 with a thickness of 70 mm: F = 2500 mm/min. With two cutting modes—single-position cutting (ABS) and single automatic feed (INC)—efficient cutting operations can be performed. Additionally, it adopts an easy-to-read and simple-to-operate LCD touch panel control system. 【Features】 - The box motion (blade descent followed by blade retraction) reduces the waiting time for operators as the clamp opens after the blade descends. - With workpiece floating ball bearings, a 1-ton aluminum plate can be moved freely in 360° with just 30 kgf of force. - The workpiece is secured with clamps on both sides of the blade, ensuring safe and stable cutting without vibrations. - The telescopic circular saw cover follows the saw blade, efficiently sucking up chips. - The back gauge achieves precise dimensional accuracy with measurements in 0.01 mm increments.

• Other machine tools
• Plastic processing machines (cutting and rolling)
• Other processing machines

High-speed cutting of resin board panel material 1250mm x 1250mm!

The URKM1250J is a machine that cuts resin board panels at high speed using a circular saw (chip saw). 【Features】 ■ Safe design with the circular saw not exposed. ■ Achieves a cutting surface without burrs or chipping by cutting with the circular saw moving back and forth. ■ Automatically performs continuous fixed-length cutting by simply inserting long materials and turning on the machine. ■ Dimension input is easily done via a touch panel. ■ The fixed-length device allows for precise positioning in 0.1 mm increments using a servo motor. ■ The running guide uses LM guides to maintain high running accuracy over a long period. ■ Supports QR code/barcode input (optional).

• Plastic processing machines (cutting and rolling)
• Resin processing machine
• Wood processing machinery

Significantly reduced cutting time compared to conventional machines. This model has enhanced functionality, including operability, maintainability, and environmental considerations, and has been developed to further improve work efficiency.

The URK cutting machine is a product born from our years of experience in cutting aluminum plates. ■ URK Series - Maximum thickness: 100 mm - Cutting widths: 1000 mm / 2000 mm / 3100 mm (3 models) - Unique anti-pinch device (anti-pinch blade) for preventing workpiece clamping (models 2000/3100) - Equipped with a uniquely developed blade cover, allowing for safe operation without exposing the blade. - The chip scattering prevention cover efficiently collects large amounts of chips with a dust collector, providing a clean environment. ■ URKG Series (New Model) - A model that enhances the basic specifications of the URK series. - Maximum thickness expanded to t200 mm, improving performance. - Reduced cutting time. Cutting time shortened by 50% compared to conventional machines using dedicated chip saws. - Cutting widths: 1000 mm / 2000 mm / 3100 mm (3 models) - Achieved over 95% chip recovery with the optional Pinocchio cover for chip scattering prevention and self-propelled blade cover. - High operability achieved with a large touch panel. - Standard equipped with a workpiece lifting device, improving handling of heavy materials.

• Plastic processing machines (cutting and rolling)

Powerful cutting force, beautiful cutting surface, precise cutting accuracy! Fully automatic running cutter.

The "Mirror Cut FURK Type" is a running cut saw capable of precision cutting of non-ferrous metal sheets (such as aluminum and copper) and resin sheets, as well as new building material boards. With two cutting modes—single-position cutting and fully automatic cycle cutting—it enables efficient cutting operations. The cutting speed can be selected without steps to match the material being cut, ensuring optimal performance. Additionally, it features an easy-to-read and simple-to-operate LCD touch panel control system. 【Features】 ■ Capable of precision cutting from non-ferrous metal sheets to resin sheets and new building material boards ■ Two cutting modes: single-position cutting and fully automatic cycle cutting ■ Beautiful cutting surfaces achieved through accurate running guides and high-precision spindles ■ Equipped with a powerful cutting spindle motor ranging from 7.5 kW to 11 kW, tailored to the material being cut ■ Cutting accuracy achieved through measurement in 0.01 mm increments for precise dimensional accuracy *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)
• Resin processing machine
• Wood processing machinery

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.