[Free Webinar] Essential Knowledge to Avoid Failures in 3D Measurement - A Comprehensive Explanation from Choosing Measurement Sensors to Practical Use Cases.

■High precision and ultra-fast 3D measurement ■Built-in controller ■Easy operation with mouse control

★November 2024: A red laser model has been added to the high-end model with a wide field of view!!★ ■High precision and ultra-fast 3D measurement X resolution from 6μm, Z repeatability from 0.2μm, maximum scan rate of 10kHz ■Built-in controller All functions necessary for inline inspection are integrated into the main unit. ■Easy operation with mouse control 3D shape acquisition, positioning, measurement and judgment with tools, and communication of results to external systems can all be easily performed with mouse operations. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other machine tools
• 3D measuring device
• Other inspection equipment and devices

Coaxial confocal line sensor

Due to differences in the wavelength spectrum reflected by height, this is a 3D confocal line sensor that accurately measures height. It acquires high-definition 3D data without blind spots through coaxial imaging from directly above. ★ Ultra-high precision and high-speed 3D measurement It performs precise 3D measurements with a maximum X resolution of 1.9μm and a Z resolution of 0.25μm. It supports inline inspections that require speed with a maximum scan rate of over 10kHz and high-speed imaging at 4300Hz even in full scan range. ★ Coaxial optical design without blind spots The coaxial optical design that scans from directly above allows for the acquisition of high-definition 3D data even for shapes with significant irregularities, such as deep grooves and protrusions. High-quality 3D scans are possible even on steep slopes with a maximum inclination of ±85 degrees. ★ Capable of measuring glossy surfaces and transparent objects It can stably capture surfaces composed of various materials, including glossy surfaces, transparent/translucent objects, and soft porous surfaces. It can be applied to shape measurement of glass, inspection of adhesive application amounts for transparent adhesives, and measurement of dicing grooves seen on glossy wafer surfaces.

• 3D measuring device

Ultimate Light Cutting 3D Profile Sensor

This is a light-cutting 3D line sensor that achieves stable 3D inspection with wide-range and high-density scanning. It is a high-performance model that is resistant to reflections and curved surfaces, capturing complex shapes without inconsistencies. ★ Stable inspection with wide field of view and high-density scanning With a high-density scan of up to 6500 points per line and a maximum field of view of 31mm, it can inspect a wide area with high precision all at once. It enables stable 3D data acquisition even at high speeds, making it ideal for inline inspection. ★ Optical design strong against reflections and slopes The telecentric optical system eliminates blind spots in the X direction. It allows for stable scanning without inconsistencies even on glossy surfaces and slopes. ★ Multi-sensor collaboration to accommodate large workpieces Multiple sensors can be networked together to inspect wide areas and complex shapes all at once. It flexibly accommodates inspections of next-generation products such as EV batteries and large electronic components.

• 3D measuring device

In connectors that connect various hardware such as automobiles, industrial equipment, and communication devices, low-cost Sn-plated products are widely used. However, there are also cases where attention is needed regarding the reliability specific to Sn-plated contacts. In this webinar, based on actual connector failure cases that have occurred in the market, we will explain the process leading to the identification of causes for typical failure modes such as: - Whiskers (short circuit failures) - Fretting wear (contact failures) Furthermore, we will systematically introduce the organization of failures through the FTA (Fault Tree Analysis) of the entire connector, as well as each failure mechanism. ■ Technical content to be explained: - FTA structure of connector failures - Mechanism of whisker formation and evaluation methods - Mechanism of fretting wear and evaluation methods ■ Introduction of future evaluation technologies: - High-temperature and high-humidity fretting wear testing (scheduled for introduction in December 2026)

Understanding TLM Overview It has become increasingly clear that traditional RTL modeling techniques alone are insufficient for the design and verification of large-scale ASICs/SoCs and FPGAs. As a result, the concept of Transaction Level Modeling (TLM) has been widely adopted, and it has become essential in verification methodologies such as UVM. In this webinar, we will introduce TLM using terminology explanations and implementation examples with simple sample designs.

＼Utilizing HPLC Analysis and Separation for More Efficient Synthetic Research／ We will hold a webinar where you can attend the content that was well-received at the seminar held in July. ▶Reduction of analysis time ▶Efficiency in impurity analysis ▶Expansion of HPLC/LC-MS utilization ▶Introduction of automation and the latest workflows In a special lecture, Dr. Kanako Kumada from the Catalysis Chemistry Research Division of the National Institute of Advanced Industrial Science and Technology will present on "Autonomization of Organic Synthesis Experiments - Aiming for Transformation of Research Processes." 【Event Overview】 ▶Date: Thursday, August 20, 2026 ▶Time: 15:00 - 16:45 (Streaming starts at 14:45) ▶Venue: Online ▶Participation Fee: Free We look forward to the participation of everyone considering improvements in analytical efficiency in synthetic research and the expansion of HPLC and LC/MS utilization.

Coherent Japan will exhibit at the 2026 International Welding Show. Dates: September 16 (Wednesday) - 19 (Saturday), 2026 Venue: Tokyo Big Sight, West Hall 1, Booth 1-06 At the Coherent booth, we will showcase advanced photonics technologies that support laser processing. We will display innovative solutions that underpin high output, high efficiency, and high reliability of lasers, including semiconductor laser products such as the new air-cooled diode laser system "COMPACT EVO AC," bars, fiber-coupled lasers, VCSELs, and advanced materials applied in thermal management. Experience the technological prowess of Coherent that supports a wide range of industries, including laser processing, electronic components, automotive, EV, and sensing fields.

Top Seiko Co., Ltd. will be exhibiting at the 10th Adhesive and Joining EXPO held at Makuhari Messe. This specialized exhibition focuses on adhesive and joining technologies essential for the manufacturing industry, covering everything from dissimilar material bonding to general applications. The accompanying seminars will introduce industry trends, initiatives from various companies, and products and case studies from exhibitors. We sincerely look forward to your visit.