What is urethane foam? We will explain its characteristics and uses.

MF-50 filter material packing shape punched product

We support die-cut processing in the shape of gaskets using MF-50 filter material. By adopting die-cut processing, we can efficiently produce identical shapes, making it a suitable processing method for mass production projects.

• Sealing

MF-50 filter material packing shape mass production of punched parts

We support die-cut processing of gasket shapes using MF-50 filter material. By adopting die-cut processing, we can efficiently produce the same shape, making it suitable for mass production projects. Filter materials are used for applications such as removing foreign substances from air and liquids. This time, by processing into gasket shapes, it becomes easier to incorporate into equipment and devices. Since die-cut processing uses molds, it allows for the repeated production of the same shape, making it suitable for cases where a large quantity is required.

• Sealing

Punching processing, sponge material, custom shape available, suitable for mass production.

We support punching processing of various sponge materials. Custom-made shapes can be produced according to your applications and requests, and we can accommodate everything from prototypes to mass production. Sponge materials are used in a wide range of applications, such as cushioning materials, shock-absorbing materials, and protective materials. By processing to match the shape of products or parts, it becomes possible to secure stored items and absorb shocks. Punching processing is suitable for mass production as it allows for efficient production of the same shape using molds. We also accommodate custom-made production according to your desired dimensions and shapes.

• sponge

Punching processing, sponge material, custom shape available, suitable for mass production.

We support die-cut processing of various sponge materials. Custom shapes can be made according to your applications and requests, and we can accommodate everything from prototypes to mass production. We support die-cut processing of various foam and sponge materials.

• sponge

Urethane sponge tube processing, length 95mm, punching processing.

This product is an example of urethane foam processed into a cylindrical shape through punching. Punching is a highly productive method and is suitable for improving processing efficiency during mass production. On the other hand, due to the characteristics of punching foam materials, the cylindrical shape does not achieve the same roundness as machined products, and slight deformation or distortion may occur. Therefore, this processing method is more suitable for applications that utilize the functions of foam, such as cushioning materials or holding materials, rather than applications that prioritize appearance and shape accuracy.

• Cushioning material

Urethane sponge tube processing, length 95mm, punching processing.

This is a product made by punching urethane foam into a cylindrical shape. It is processed into a cylinder with a length of 95mm and can be manufactured in dimensions according to specific applications. By adopting the punching process, it is a case of efficient production. By processing the foam into a cylindrical shape, it can be used for various applications such as protective materials, cushioning materials, and component holding purposes. The punching process uses a mold for processing, making it easy to repeatedly produce the same shape, and it is an efficient production method when a large quantity is required.

• tube

Cushioning material for storage cases (customizable)

This is a processing project for storage cushioning materials related to medical device tools and various jigs and tools. By designing shapes tailored to the items to be stored, we can accommodate the production of: - Interior foam for cases - Retaining inserts - Cushioning pads - Positioning components

• Cushioning material

Cushioning material for storage cases (customizable)

This is a project for processing storage cushioning materials for medical device-related tools and various jigs and tools. By designing shapes tailored to the items being stored, we can accommodate the production of: - Interior foam for cases - Retaining inserts - Cushioning pads - Positioning components

• Cushioning material

ECS tubular punching processing, extremely small size

ECS tubular punching processing with an outer diameter of 5φ, inner diameter of 2φ, and length of 30L has been performed. This time, it corresponds to a shape with an outer diameter of 5φ, inner diameter of 2φ, and length of 30L.

• tube

ECS tubular punching process outer diameter 5φ inner diameter 2φ length 30L

We performed punching processing on a tubular shape using ECS material. This time, we are accommodating a shape with an outer diameter of 5φ, an inner diameter of 2φ, and a length of 30L. ECS is a sponge material with cushioning properties, used in a wide range of applications such as cushioning materials and sealing materials. How about using it for the protection of cords or glass rods?

• tube

The construction site yard is not only a place to store materials but also a location for clients and nearby residents to learn about the site's activities. By incorporating wood into a typical yard lined with steel plates, it becomes possible to achieve a visually distinct differentiation. Hyper CLT flooring is a wooden lightweight flooring made from CLT (Cross Laminated Timber) that is laminated in the orthogonal direction. By laying it in material yards, heavy machinery work yards, access roads, and worker pathways, it can create a new landscape for the site known as the "wood yard." The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them relatively lightweight and easy to install, remove, or relocate depending on site conditions. In addition to the unique texture of wood, it also helps to reduce metallic sounds and summer glare, contributing to environmental considerations and addressing concerns from neighbors. Hyper CLT flooring is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can also be utilized for the application of new technologies in public works, creativity, and proposals for wood utilization. Wooden flooring, NETIS, civil engineering, CLT, wooden lightweight flooring. Why not incorporate wood into part of your yard to enhance functionality and the site's communicative power?

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.