Latest Trends in PFAS and Residual Pesticide Analysis in Food | Explanation of 700 Component Simultaneous Analysis Examples and Solutions for Improving Analysis Efficiency 12/8 [Live Webinar]

Are you satisfied with just high sensitivity? - Ultra-high sensitivity LC-MS/MS that maintains stable operation for a long time and is easy to maintain.

Many people are struggling with systems that are prone to contamination and time-consuming maintenance. The Xevo TQ Absolute, known for its resistance to contamination thanks to the "ZSpray Ion Source," along with a new source shield, minimizes contamination of the ion source from sample matrices and salts in the mobile phase. It also allows for the removal of neutral molecules before the mass separation section (StepWave XS), concentrating ions for introduction into the mass separation section. This helps maintain the system in a "good condition" for a longer period, maximizing uptime. As a latest high-sensitivity model, it achieves higher sensitivity and lower quantitation limits. Additionally, it is more compact compared to conventional products, reducing power and gas consumption by about 50%, and also decreasing heat generation by approximately 50%. 【Features】 - Sensitivity to anionic compounds improved by up to 15 times (compared to previous products) - Ensures consistent robustness and reproducibility, maintaining performance and productivity over a longer period - Reduces electricity and gas consumption by about 50% compared to typical high-performance TQ mass spectrometers, with heat generation also reduced by about 50%

• Analytical Equipment and Devices
• Mass Spectrometer

We provide a reliable total solution from sample pretreatment to measurement and analysis, blank contamination avoidance measures, and support.

PFAS has excellent chemical properties such as water and oil repellency and surfactant characteristics, and is used in a wide range of fields. On the other hand, due to its persistence and bioaccumulation, numerous cases of PFAS detection in water quality, the environment, and food have been reported both domestically and internationally. As a result, countries are advancing regulations and monitoring efforts, and there is a demand for more sensitive and accurate measurement technologies. In Japan, a ministerial ordinance was announced to raise the water quality standards for "PFOS" and "PFOA," which will take effect in April 2026. Waters is focusing on developing methods for trace analysis of PFAS in various samples. In addition to providing analytical instruments, we offer insights on sample preparation and blank contamination prevention, as well as equipment service and support, along with consulting services tailored to analytical needs. By clicking [Send], you are deemed to have agreed that Waters will use and process the information provided on this site in accordance with the Waters Terms of Use and Privacy Notice. Terms of Use and Privacy Notice www.waters.com/legalandprivacy

• Separation device
• Analytical Equipment and Devices
• Mass Spectrometer

Next-generation large and high-speed metal 3D printers that offer short lead times, low costs, and high precision are being rapidly introduced to the market. These printers are actively being utilized in the manufacturing of large metal parts and products in the aerospace, automotive, defense, industrial machinery, plant, and civil engineering and construction sectors, as well as for the repair of metal parts and molds, and reverse engineering. In the first lecture of this seminar, we will provide an overview of the Farsoon LPBF method large and high-speed metal 3D printer, which can produce parts up to 1500mm, along with its short lead time, low-cost, and high-quality manufacturing technology and public case studies. The second lecture will cover the short lead time manufacturing technology and examples from Fujikohsai Industries, which has adopted the large metal 3D printer from Meltio, as well as low-cost and material reduction cases utilizing topology optimization. The third lecture will present applicable cases from JFE Engineering, which has introduced a large metal 3D printer from Nidec Machine Tool and is experiencing a surge in requests for manufacturing marine and rocket engine parts, plant equipment parts, and applications in parts and mold repair and reverse engineering. The fourth lecture will showcase the latest manufacturing technology and examples from Sanko Gosei, which is producing high-functionality and high-quality diverse large resin mold parts using a large hybrid 3D printer from Matsuura Machinery. We will provide a clear and detailed explanation of the above topics.

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

[Lecturers] PwC Consulting LLC Senior Manager Yosuke Enomoto Senior Manager Tomoe Ejiri [Key Lecture Content] Against the backdrop of the rapid proliferation of generative AI, the digital infrastructure supporting data processing, communication, and computing resources is undergoing a significant transformation. In this presentation, we will first organize the trends in the terrestrial data center market expanding from AI demand, as well as the structural changes surrounding power, location, and networks. Furthermore, as communication and data processing infrastructure expands into space, we will take a broad view of the future of next-generation digital infrastructure that integrates terrestrial and space elements. Additionally, we will explore new business transformations and opportunities that arise from combining satellite data and internal and external data with AI, and implementing them in business and decision-making through the Forward Deployed Engineer (FDE) approach.

[Speaker] Mr. Takashi Muratani, President and CEO of AnPrenergy Co., Ltd. Mr. Atsushi Nakajima, President and CEO of PandaPower Co., Ltd. [Lecture Topics] 1. The Essentials of Low-Voltage Battery Business / Mr. Takashi Muratani 2. New World Lines Created by Flywheel Batteries / Mr. Atsushi Nakajima 3. Q&A / Business Card Exchange

[Lecture Topics] 1. Why Chemical Recycling Now? ~Preparing for New Management Challenges in the Era of Resource Circulation~ Idemitsu Chemical Recycling Japan Co., Ltd. President and CEO, Yoshihiko Okamura 1. Transition from Linear Economy to Circular Economy 2. Latest Domestic and International Trends in Plastic Resource Circulation 3. Required Corporate Responses 4. Our Company's Initiatives 5. Future Prospects and Challenges of Chemical Recycling 6. Q&A / Business Card Exchange 2. New Markets Created by the Circular Economy Strategies for Building a Recycled Material Supply Chain Boston Consulting Group Associate Director, Ikuya Ueda 1. Changes in the Management Environment Surrounding Resources 2. Policy Trends in Europe, the U.S., and China and the "Circular Economy Action Plan" 3. "Three-Tier Supply Infrastructure" Supporting the Recycled Material Supply Chain ~Collection, Recycling, and Market Infrastructure~ 4. How Access to Supply Infrastructure Affects Corporate Competitiveness 5. Three Management Decisions Required of Companies (1) Pre-investment in Procurement Capability (2) Controlling Key Nodes (3) Viewing CE as a Starting Point for Business Models, Not Just a Cost 6. Q&A / Business Card Exchange