Announcement of the product page launch for the MK4 KLAXON Latex Mechanical Stability Testing Machine.

The MK3 uses an electronically controlled direct drive engine, and it is a test machine that can maintain speed accurately.

The rubber latex tester uses a highly reliable electronically controlled direct drive motor, which can accurately maintain the set speed. The panel allows for value confirmation via LED. This panel is protected by a matte black aluminum bracket on a chrome-plated post. Beakers made of glass (for synthetic rubber) or acrylic (for natural rubber) are housed on an aluminum table. The height is adjustable. The equipment is mounted on a hard rubber sponge pad located on an enameled cast iron base. This device is capable of withstanding use in tropical conditions. The motor bearings are maintenance-free.

• Mixer/agitator
• Other laboratory equipment and containers
• Testing Equipment and Devices

Quality control of rubber products. Accurately assess the stability of latex.

In the rubber industry, evaluating the stability of latex is crucial for maintaining consistent product quality. The stability of vulcanization significantly affects the durability and performance of products, necessitating accurate test results. The MK4 Latex Stability Tester enhances the reproducibility of test results by precisely managing rotation speed and timer settings. The stable rotation at 14,000 rpm, controlled by an inverter, helps reduce variability in testing. This testing machine provides reliable data for quality control of rubber products. 【Usage Scenarios】 - Quality control in rubber product manufacturing - Testing in factories producing gloves, condoms, balloons, etc. - Testing in compliance with ISO and ASTM standards 【Benefits of Implementation】 - Improved reproducibility of test results - Stabilization of product quality - Compliance with standards

• Mixer/agitator
• Other laboratory equipment and containers
• Testing Equipment and Devices

Latex stability test contributing to the improvement of tire durability.

In the tire industry, quality control of the latex raw materials used is emphasized to ensure product durability. In particular, the stability of latex directly affects the performance and lifespan of tires, necessitating accurate evaluation. Unstable latex can lead to early deterioration and performance decline of the products. Our latex stability testing machine, Model MK4, evaluates the stability of latex raw materials through reliable tests compliant with international standards, contributing to the improvement of tire durability. [Application Scenarios] - Quality control of latex raw materials in tire manufacturing - Evaluation and comparison of latex in new material development - Quality control testing based on ISO and ASTM standards [Effects of Implementation] - Improvement in product quality through stability evaluation of latex raw materials - Contribution to enhanced tire durability - Increased efficiency in quality management through improved reproducibility of test results

• Mixer/agitator
• Other laboratory equipment and containers
• Testing Equipment and Devices

Accurately evaluate the stability of latex that supports the performance of sports equipment.

In the sports equipment industry, quality control of the materials used is emphasized to ensure the durability and functionality of products. In particular, latex material is crucial because its properties, such as elasticity and grip, directly affect product performance, making stable quality assurance essential. If the stability of latex is low, there is a risk of decreased product performance or early deterioration. Our latex stability testing machine, Model MK4, addresses these challenges by accurately evaluating the stability of latex, thereby supporting the performance guarantee of sports equipment. [Usage Scenarios] - Evaluation of latex raw materials for the midsole and outsole of sports shoes - Confirmation of latex stability related to the grip performance of sports gloves - Material evaluation of sports balls (e.g., certain training balls) - Quality control of sports equipment using latex materials [Benefits of Implementation] - Improvement of product performance through stabilization of latex raw material quality - Enhanced product durability and reduced risk of complaints - Realization of reliable quality control in accordance with ISO and ASTM standards - Increased efficiency in the evaluation and comparison of latex materials during the research and development phase

• Mixer/agitator
• Other laboratory equipment and containers
• Testing Equipment and Devices

A high-precision latex stability test that contributes to ensuring the strength of gloves.

In the glove manufacturing industry, evaluating the stability of latex raw materials is crucial to ensure product strength and durability. In particular, quality control of raw materials is essential to prevent tearing and deterioration during use and to maintain safety. Inadequate evaluation of latex stability can lead to a decline in product quality and complaints. Our latex stability testing machine, Model MK4, provides accurate test results and contributes to ensuring the strength of gloves. 【Application Scenarios】 - Quality control of latex gloves - Stability comparison of raw materials by lot - Quality testing based on ISO and ASTM standards 【Benefits of Implementation】 - Improvement in product strength and durability - Reduction in complaints due to stabilization of quality - Support for reliable raw material selection

• Mixer/agitator
• Other laboratory equipment and containers
• Testing Equipment and Devices

When adopting new civil engineering materials, it is important not only to consider performance but also to ensure that clients and designers can easily verify information. Our Hyper CLT panels are registered technologies with the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) under NETIS, with registration number "TH-250021-A." Additionally, they are registered with NNTD, which publishes technical information in the field of agricultural and rural development. In NNTD, they are listed as technologies that can be utilized for agricultural roads, drainage channels, field improvements, material storage areas, and temporary roads. They can also serve as information for considering new panels in agricultural civil engineering and rural development sites. Hyper CLT panels are wooden lightweight panels made from CLT (Cross-Laminated Timber) that is laminated in the orthogonal direction. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them relatively lightweight and easy to install, remove, or relocate depending on site conditions. Wooden panels, NETIS, civil engineering, CLT, wooden lightweight panels. Through registration with NETIS and NNTD, Hyper CLT panels are expanding new options not only in general civil engineering but also in agricultural and rural development sites.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)